Related
hi alls
who can tel me how the way that i can resetup WM2003SE from WM2005
because WM2005 not Hard reset and any programsnot work on it
thank you
mmbmvc said:
hi alls
who can tel me how the way that i can resetup WM2003SE from WM2005
because WM2005 not Hard reset and any programsnot work on it
thank you
Click to expand...
Click to collapse
WM2005 Hard Reset
Press power putton
Then press Record Button
Then Press Camera Button
Then with Stylus press Reset Button
Use the recorder button and the camera butoon to scroll and change values.
In your screen you can see 3 options.
1 Kit = YES ------------------ change this to NO
2 Register Hive= No -------- should remain NO
3 Storage = No ------------- change this to YES
then press the big round button(nav pad between the call and call end buttons)
the device reboots.
you go to bootloader by press Power + round big button + soft reset, then downgrade
no need to hard reset
ActiveSync doesn't work
I can't downgrade to WM SE because ActiveSync does not work
I could downgrade using bootloader mode nevertheless ActiveSync did not connect my device.
I have uninstalled AS 4.0 and installed AS 3.8, but it doesn't work! I can connect my XDA II. Could you tell me what is the reason?
Yazzon,
I have downgraded without any issues. A matter of fact, I kept Active Sync 4.0 instead of going back to 3.8
What is the issue with Active Sync, have you tried uninstall and reinstall? Which version of Active Sync are you using?
I've reinstalled AS versions: 3.7, 3.8, 3.8 - Polish. After reinstallation, when I cradle my device, AS connect XDA II but I can't explore device and I can't synchronize. I reinstalled AS many times but no results.
In order to return from wm2005 to wm2003se I used himaupgradeut_197.exe in bootloader mode and the original file nk.nbf of wm2003. To me he worked to me.
I used activesync 4.0.0.
Also it is possible to install wm2005 again using himaupgradeut_197.exe.
Please Help me! Can't downgrade!!!!
I tried: himaupgradeut_197.exe in Serial Mode
I tried: hard reset. Didn't really do anything
What did I do wrong. Always get a connection error... 101
Please Help!
In order to upgrade to 2005, you have used himaupgradeut_197.exe?
ive downgraded by puting it 2 boot loader mode and then put it in the cradle (with AC 4.0) and then run the HimaUpgradeUt.exe from my rom.
and it was 2003se again
Downgraded from WM2005 to 2.20
:arrow: I downgraded from WM2005 to 2.20 without any problems .
Extended ROM sill working .
And I am keeping ActivSync 4 becouse giving me no problems .
By the way ... My ActiveSync 4 Build 4328 .
Is it the latest one ?
I think the key to a sucessful downgrade from WM2005 is to keep AS 4.0 on the machine while you have WM2005 on your PPC. After the downgrade you can go back to AS 3.8. In my case I decided to keep it .
However I ran into one issue with AS 4.0 after the downgrade. After installing MS Voice Command 1.01, I tried to upgrade to MS Voice Command 1.5 and it keeps complaining about not being able to find previous versions. I went to another machine with AS 3.8 and tried the same thing with the same files and I had no issues.
Nonetheless I am keeping AS 4.0 until I run into something I don't have a workaround.
I got AS 4.0. I did not upgrade with..._197.exe. I did it with some other.
Maybee someone can give me a link to a clean 2003se without any nicknack? Maybee that works. Used the aussie version. To downgrade.
Thanks in advance.
Upgrade WM2005 with bootloader v. 1.06
Hi all!
Has there anyone upgrading to wm2005 with bootloader version 1.06? Thought of trying it too, just that afraid can't downgrade to wm 2003 SE. Coz I'm aware of dcs threads, with bootloader version 1.06 it isn't likely to downgrade from wm 2003 se to a normal ppc 2003(of which is of the original rom). Hope to hear inputs. thanks.
ferioz
When i want to downgrade i always get a connection error and then my active sync is not working anymore until restart of my pc. Any suggestions? Using as 4
maniak said:
When i want to downgrade i always get a connection error and then my active sync is not working anymore until restart of my pc. Any suggestions? Using as 4
Click to expand...
Click to collapse
From which Rom version are you trying to downgrade? What is your bootloader version?
Downgrade to WM 2003 SE
To those having problems in downgrading, this might help...
I was just trying out of the thrill for the new wm 2005. Before that my previous Rom version was WM2003 SE. Flashing to wm 2005 was rather smooth sailing; there isn't any hindrances like country id error code and so forth.
Thanks for those threads from the geekz here like softworkz, xda2jojo, dewild1(who's been reincarnate into a new creature at xda-developers ), and other geekz who's involved in this so called immature(by MS) project. I was literally read their threads and get the ideas from it.
Was initially excited on the new OS, but when I start to touch on it, oh well, it's too good to be true... Nah not to critize much of this... The bottom line, it's a total new looks and new sounds, especially on the click at the start menu, I kinda like that new sound... Good interface but it has lots of buts...; camera button wasn't bound, so when click on camera button is just like a dummy button...
While I'm typing this, my downgrade process is still working at the background, so I pretty much believe that it gona work as it still does the process, so confidently would want to contribute what I did to downgrade.
1) Sit back relax, don't panick = it doesn't/will never bring to solution. Take a deep breath and always feel with hope
2) All you need is to be able to get the device into bootloader mode, my bootloader version is 1.06, so wouldn't be sure if it works on other version, hopefully yes.
3) During the bootloader mode, dock your xda 2 onto the cradle, and get ready of your previous Rom files, double click on HimaUpgradeUt.exe and just wait for it to start doing the magicX...
I hope I didn't misss any step here, even if I did, please excuse me, coz i'm just a newbie hehe....
Ok hopes of getting back your xda 2 alive is yet to process, just fireaway
ferioz
maniak said:
When i want to downgrade i always get a connection error and then my active sync is not working anymore until restart of my pc. Any suggestions? Using as 4
Click to expand...
Click to collapse
go to bootloader b/4 you put your device into cradle
Weeeeeell -
i have no clue why! but I managed to get it running.
I just inserted into the cradle and it worked!
Sometimes you just have to go to bed and try it the next morning
Only thing I did was to pull out the Battery over night... Maybee that did something.
Just for Info:
Bootloader V1.02
ROM : Can't See is just upgrading @ moment.
Btw: The good thing about Wm2005 it is working even if you have no energy anymore... No data will be lost. The Bad thing you lose 128 megs of Ram...
i suggest 2 read this:
http://forum.xda-developers.com/viewtopic.php?t=18122
it discribes how to flash ur phone
Can anone tell me how i could unlock my wallaby lock on T-mobile?
i have already upgraded the ROM to 4.01.12
and radio to 4.21.00
protocol version is 32S54... but get Unlock Code screen everytime i insert my simcard...
please please please, im begging.... i read one article explaining about SpecialEditionROM but the link is dead... any option pls.???
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
T-Mobile Unlock
Lumpi,
I, too, have T-Mobile that I need to unlock. My problem is that I can't figure out how to install the XDA ROM that allows the unlock--the link at the bottom of the XDA page doesn't work.
Skip A
http://wiki.xda-developers.com/index.php?pagename=Wallaby
I can't open the step by step instructions for installing 'special edition 1.2'.
Some Wallabys don't support the GSM network that T-Mobile uses (at least in the UK), so if your phone works with other SIMs from Vodafone/O2 then chances are it will never work with T-Mobile. In this case, it's a hardware limitation and there is nothing that can be done about it.
Dear Stefan I want to meet u in person in stuttgart
LumpiStefan said:
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
Click to expand...
Click to collapse
Dear Stefan i will be in stuttgart for a church conference from 3 april to 12 april.
I have t-mobile wallaby PW10B1 ROM 4.02.04 eng 8/24/05 radio 6.18.00 protocall version 324e4. I am unable to unlock using xdadev_all_unlock.exe they give errors.the other ROM version u mentioned site http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe is not working. can u please help me. is it possible to add a camera and GPS reeciever to my pda? i dont have serial cable.is it possible i can wire them all?
kjpeter said:
I am unable to unlock using xdadev_all_unlock.exe they give errors.
Click to expand...
Click to collapse
This is the wron tool. That does not work on the Wallaby device.....
kjpeter said:
the other ROM version u mentioned site http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe is not working.
Click to expand...
Click to collapse
I think you´re concerning on, that the link for downloading is not working...
Try this one: ftp://xda:[email protected]/Wallaby/ROM/Special/special_rom_1.2.exe.zip
kjpeter said:
can u please help me. is it possible to add a camera and GPS reeciever to my pda? i dont have serial cable.is it possible i can wire them all?
Click to expand...
Click to collapse
GPS-receiver should be no big problem. It should be a gps-receiver with PS2/serial-Connector. Any USB wouldn´t work....
How dou you want to conenct a camera?
If you didn´t get the unlocking worked, we can try if we can make a meeting when you are in Stuttgart, than i will take a look at it....
Stefan
I downloaded SE rom 1.2 and when i run exe in dos window i have a message - ERROR GetConnectionType.
i used activesync 4.5 beta on xp .
(actually i had activesync 3.5 on my xp pc but on wallaby-activesync itsays incompatible activesync .so i changed from 3.5 to 4.5 beta )
any help stephen?
how to upgrade the activesync in my pda?
you dont
upgrade it
Try using the 3.7 or the 4.0/4.1 Version of Active Sync.....
Stefan
xda2unlock
I put in boot loader mode the pressing left side sound control switch put it in to USB flash mode and ran xda2unlock.exe at desktop got XP shutting down that xda2unlock.exe. at that time i put active sync USB on stop. couldnt do any thing.
while try once i saw serial rs232 on wallaby screen i dont know how to acivate it again and try abouve procedure.
is there any other way to unlock my mobile.?
I want to connect to gprs and browse net.
wallaby unlock
i was finnally able to unlock mine yesterday (02/25/07) but you need to change 2 things before being able to use the unlocker.exe program . first you wont be able to do it via the usb connection it just wont work due to the rom currently installed use the sd mem card method to flash the rom using a card reader and OSIMagetool.you need to change the rom to the ROM: 3.17.03 ENG (XDA special edition) you need to do this so you can flash the radio and the current rom wont allow you to do it and then change the radio to version to Radio: 6.24.00 (mine was 6.25.02 and its whats not allowing the unlock to work ) then the unlocker.exe will work . the instructions are on this url http://www.romkitchen.de/tools/manual2_unlock.htm and the software i used is on this url http://www.romkitchen.de/tools/form.php .The instructions here changed the boot loader but it wasnt needed to get my phone unlocked you can probably skip that step also . good luck
Please, link is not working
The link ftp://xda:[email protected]_1.2.exe.zip is not working anymore.
Could someone please, point me in any other direction I can look for?
Thank you very much.
Manuel J.
P.S. Still searching
http://www.romkitchen.de/tools/special_rom_1.2.exe.zip
LumpiStefan said:
http://www.romkitchen.de/tools/special_rom_1.2.exe.zip
Click to expand...
Click to collapse
Thank you so much.
Manuel lJ.
want to meet u in stuttgart
Dear lumphistephen i dont know your personel mail id so this message ,i am reaching stuttgart on 2 april will be there till 15th april for church confernce how can i contact u there?
My Host Mr.Gunter Janzens phone number 0711-4579360 or 0711-457790 or 0175 689 5555 (mobile).Also u r welcome for the meetings where friends from all over the world come there for christian fellowship.can u please
give personel mail id .mine is [email protected]
I bought a Softbank X01HT after finding this site, and as a total WM5 newbie, decided I would switch the phone from Japanese to English. It took me 5 days of lurking around this site, but I finally did it. Here's a summary of my efforts for those of you who dare follow:
Unlock the phone
I went here to get it done: http://www.imei-check.co.uk
Download and Install English ActiveSync from Microsoft
Get it here:http://www.microsoft.com/windowsmobile/activesync/default.mspx
I'm using v4.2
Disable Advanced USB Networking
If ActiveSync keeps disconnecting on USB, then go to Settings > Connections > Usb to PC, and disable advance network funtctionality.
Here's the thread that describes the problem: http://forum.xda-developers.com/showthread.php?t=276783
Flash with an English ROM
Here's the post that I followed: http://forum.xda-developers.com/showthread.php?t=280566&page=7
Here's the ROM for JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship
Note: the ROMs and the ExtendedROMs are not the same. The Flash will take about 30 mins. It will reset when done, and then ask you to align the screen. I just did as I was told. when done, it automatically started to load the included ExtendedROMs.
Unhide Extended ROM folder
Install fit4cat Hermes Tweaker, I used v1.1a. Get it here: http://www.fit4cat.de/thread.php?threadid=56
From the earlier post, enable 'HSPDA settings' and check all the boxes on the 'security' tab (mount extROM, unlock extROM, allow non certified apps)
Install the Softbank Extended ROMs
Get the Softbank Extended ROMs from this page: http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtendedRoms
Move the contents of the folder to your /ExtendedROM folder then do a HARD reset
How to do a HARD Reset
The instructions for a HARD reset are located here: http://wiki.xda-developers.com/index.php?pagename=Hermes_Resets
Make sure you see the menu with the press 'R' to reset. If you don't, you didn't do it right. Try it again.
Apparently, after a Hard reset, you will automatically start the 'autorun' script for the Softbank Extended ROMs, and this will add the settings for using data over the Softbank 3G network. If you still don't get a data connection to the Softbank Network, you can add it manually. Read this page for details (#17): http://forum.xda-developers.com/showthread.php?t=280566&page=2
Install a Registry Editor
I chose the one included in the Resco Explorer. Even though your processor is by Samsung, make sure you download the CABs for the ARM/Xscale processor.
Get it here: http://www.resco.net/pocketpc/explorer/indepth.asp
Note: you have to install the Explorer and the Registry Editor plugin
Do the Japanese Keyboard Hack
The key thing to remember is that even though your Hermes speaks English, the keyboard uses a Japanese layout. The code for Japanese is 0x0411
[HKEY_CURRENT_USER\ControlPanel\Keybd] "Locale"= 0411 (Hex, not String)
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty] "Layout"= 20411 (Hex)
[HKEY_CURRENT_USER\keyboard layout\Preload] "Default"= e0010411 (Hex)
[HKEY_CURRENT_USER\keyboard layout\Preload\1] "Default"= e0010411 (Hex)
Install Japanese Language Fonts
Now that your Hermes speaks English, you can't see Japanese Web pages. This CAB will fix it. Get it here: http://asukal.seesaa.net/article/6912738.html
Install BTaudio Hack
This hack lets you route the PDA audio to your Bluetooth headset. Without it, you can only use the headset for the phone. It worked fine with my Motorola HS850 set to the "Hands Free" BT profile. I used the version from this post (includes a link to the CAB): http://forum.xda-developers.com/showthread.php?p=1044017#post1044017
and Voila! you are ready to go.
Of course, before you start you should read the following:
http://wiki.xda-developers.com/index.php?pagename=Hermes_For_Beginners
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeFAQ
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
The above is a summary of what I did, and it worked for me. But, of course, nothing is warranted and proceed at your own risk. yada yada.
good job man. really appreciate your contribution
mixersoft said:
Unlock the phone
I went here to get it done: http://www.imei-check.co.uk
Click to expand...
Click to collapse
No need to unlock if you don't want to expend the 20GBP, you just need to donwgrade to bootloader 1.04.
1) Download M3100v3cUnlock.exe from imei-check, but do not pay ;-)
2) Turn phone on and connect to pc (green ActiveSync icon in system tray)
3) Start M3100v3Unlock.exe and close it when it asks for the .unl file with your imei, the device should stay in bootloader (tri-color) screen or a white screen.
4) disable USB connections on activesync
5) Run the extracted 1.04 bootloader-only upgrade, version will be shown as 9.99.999.9 just click next / update.
6) When upgrade ends device will softreset and you'll have bootloader 1.04 in your device which will allow you to flash any rom without CID checking
Then follow the rest of the language switching process with the good mixersoft explanation
4) disable USB connections on activesync
5) Run the extracted 1.04 bootloader-only upgrade, version will be shown as 9.99.999.9 just click next / update.
Click to expand...
Click to collapse
About this step, it means I have to unplug usb cable from pc before uses bootloader ?
thank you.
No, sorry if I was not clear, it means you have to right click on active sync icon, select "connection settings" and disable the checkbox for "Allow USB connections".
thank you. I will try.
Hello! pof;
3) Start M3100v3Unlock.exe and close it when it asks for the .unl file with your imei, the device should stay in bootloader (tri-color) screen or a white screen.
4) disable USB connections on activesync
5) Run the extracted 1.04 bootloader-only upgrade, version will be shown as 9.99.999.9 just click next / update.
Click to expand...
Click to collapse
I use M3100v3Unlock.exe after it asked me for .unl file I close it and device automatically reset. Then I use 1.04 bootloader-only upgrade and try to upgrade
(with disable USB conection on activesync) it says error because can not find conection. How will I do?
Thank you.
Just tell the upgrade utility to continue without verifying... or do not disable usb connections in activesync, iit is not really that important, upgrade will go on equally
I tried to do for many times but failed. And this the message from upgrading.
Error 256 here is the image of it.
http://aycu28.webshots.com/image/3987/2004623998243022487_rs.jpg
What happens if you follow my steps in post #3 but do not do "step 4"? (ie: do not disable usb connections in activesync).
The update should be fine after that, only that it starts from bootloader not from OS and the rom utility says it cannot find the "current" version, but should follow as normal.
What happens if you follow my steps in post #3 but do not do "step 4"? (ie: do not disable usb connections in activesync).
Click to expand...
Click to collapse
in step#3 after I close M3100v3Unlock.exe when it ask .unl file. Device automatically reset, it not stay in White screen or tri-colour screen. So I run
bootloader upgrade, tried with Disable USB conection but failed so tried with normal connect both of them failed as you can see in image on last post.
Please help me.
thanks so much.
ps. anyone succeed with this solution?
taicyber said:
in step#3 after I close M3100v3Unlock.exe when it ask .unl file. Device automatically reset, it not stay in White screen or tri-colour screen.
Click to expand...
Click to collapse
Do not let the device reset, disconnect it from usb (don't worry, it is safe), and close the unlocker then. When unlocker is closed reconnect the device and follow with the extracted-bootloader-1.04 upgrade.
Works!! Thanks
It worked for me. Thank you for your time and energy... Its working on Softbank network in Kanto. I just need to install the .cabs for Japanese. I cant read Kanji very well but it just looks better than Obakemoji..
Thank you very much Pof.
I follow your last post and it work for me.
When my device was blank screen I dis connect usb cable and then
run bootloader upgrade( not tick Allow usb connection in Active sync).
From now, I will start to flash rom and then install Thai and Japanese SIP.
Actually, some Thai sip can use with WM5 Japanese OS can input(visual keyboard) Thai word
but can not read homepage or use handwriting.
thank you again Pop for your help.
HI
I have a question about this.
After language change to English the phone work 100% fine?
All applications, all softbank services and etc ?
I wish to change my phone to this X01HT, but i will do this only if I can use the phone 100% in english.
Thanks
adrianomm said:
I wish to change my phone to this X01HT, but i will do this only if I can use the phone 100% in english.
Click to expand...
Click to collapse
Yes, it will be flashed with an english rom, you will be able to use it in english without problems
One more question for confirmation before flash.
Install the Softbank Extended ROMs
Get the Softbank Extended ROMs from this page: http://wiki.xda-developers.com/index...s_ExtendedRoms
Move the contents of the folder to your /ExtendedROM folder then do a HARD reset
Click to expand...
Click to collapse
in this step, it means that after finish flash rom I have to put Softbank Extended Roms into Extended Roms? How about data in Extended Rom before I put Softbank Extended Roms into I have to delete them all? Or no data in Extended Roms after flash? If it is emtpy extended rom I see.
Wow this is amazing. I did a major Homer Simpson this week when I picked up my new X01HT and didn't think to ask the sales lady whether it could switch to English. My Japanese is REALLY basic, so THANK YOU so much for this thread and to all the guys contributing.
I agree with taicyber, my question is the same....are the Extended ROMs nessisary? Basically I don't care about "extra features" etc etc. I just want a working phone in English which doesn't kill my contract with Softbank in anyway (apart from the fact that doing this will void any warrantee).
Otherwise awesome post and I can't wait to get stuck into this....heres hoping I don't brick it....lol.
Thanks for answer me!
Another question.
You know if have any others language to install ?
English is just fine , but Brazilian Portuguese is my primary language. Any chance to change to Portuguese too ?
Or Spanish?
Thanks again
Sevenhelmets said:
are the Extended ROMs nessisary? Basically I don't care about "extra features" etc etc.
Click to expand...
Click to collapse
No, it is not necessary, you can skip the extended rom step if you want. And if you are not happy after this, you can install the cabs from the softbank extended rom (or any other) later.
adrianomm said:
You know if have any others language to install ?
Click to expand...
Click to collapse
The languages available are the ones on the shipped roms on the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
You can flash whichever you like, it doesn't have to be JasJAM rom as pointed on the first post of this thread, this was just an example.
ftp://xda:[email protected]/Wizard_Love_2.26.10.2_WWE_Novii+CF2.rar is something i am interested in using and i am looking for a link to a tutorial of how to instal this type of stuff...i have a locked G4
killacam13 said:
ftp://xda:[email protected]/Wizard_Love_2.26.10.2_WWE_Novii+CF2.rar is something i am interested in using and i am looking for a link to a tutorial of how to instal this type of stuff...i have a locked G4
Click to expand...
Click to collapse
What about that ROM interests you? Is it even appropriate for a G4? Perhaps a search of the forums for info on that ROM might help. There is also the WIKI http://forum.xda-developers.com/showthread.php?t=277976
--M
(please read, re-read, and read some more before you flash your G4. You don't want a really expensive paper weight.)
http://forum.xda-developers.com/showthread.php?t=284189 is were i got it from...it runs on g4s that r locked...which is what i have so i wanted 2 no how to put it on my wizard...i mean every1 there that did it never asked for a tut or anything so i thought there was a link to a tut i was missing...so if u kno how to install this or anything else like this plz do tell
charge phone to 100%
download rom, attach phone remove storage card.
run exe
tick boxes
Avanti in italian is next, avanti all the way till the end (tick boxes) and mda will re-boot to three colour screen progress bar and when 100% it will reboot and will run the first time setup allow the extended cab to install after allignment and welcome reboots itself and all done an MDA running faster
Add your settings GPRS.
,etc
but there r 3 exe's in it... i took newromupdateutility_wizard_noid.exe and updated my rom...but now there is still RUUResource.dll, RUUGetInfo.exe, EnterBootloader.exe, and nk.nbf so what do i do with all these other things in the folder...?...help plz
the first one the noid one
the other files are what it uses to put the mda in bootloader menu, etc if you ran the noid and the mda finished thats it
ok...i did it and on mine b4 it says E and connects to the internet but after i dled it and tried 2 get to ther internet it said and i couldnt connect so i went back to the original version...anyway to get this working?
yes that just means that you need to add your provider gprs settings to get on the internet for your device what service provider do you have?
i have t-mobile...and another wuestion...wat exactly does wizard love to 2 ur ppc...makes it faster? adds somethin 2 it...wut?
it makes it faster yes
t-mobile us settings for gprs can be found here you just need to add a new connection under connection
http://support.t-mobile.com/knowbase/root/public/tm21625.htm
theres no instant messenger on wizard love!??!?!?!?
dial panel still have some problem
cann't install the third panel,for explam,htc dial
ha,all people can report this rom bug in this Thread
thanx
good job
mun_rus
3rd party Touch Dialer acts the same as it did in WM5,but I installed most of the WM6 HTC apps and they work fine. No PocketMSN,though. Send/receive through activesync is slow and problematic.
3rd dialer also has problem in mine. and the internet sharing also do not work,
it seems to have conflict with the activesync, the two can not work at the same time
Windows Live Messenger Won't Connect
after upgraded to WM6 Rom, my Windows Live 10.6.33.0600 (Fixed) (duttythroy) version just can't get connected....gprs,edge,wifi,activesync.....oh my GOD!!!
Any idea?
Mobem CE-Star Problem
another problem in Asia here, i manage to install mobem CE-Star (Chinese IME) on it, but after restart, the touch screen not responding, hardware button not working, but device not hang, still receive incoming call, but no way to answer it...
Could not install certificate
I am unable to install root certificate and leaf certificate on my Gene 100. Please tellme how to unlock WM6 or way to install certificate. Diplays error "The certificate was not seccessfully added. Please restart the device and try again". After restart it still does not add.
hiii actually i am very new to this flashing and stuff ... and i cant understand ... how to go on with the first step that rom update utility thing!!!
i run it and then at 2% i get the error 270
btw i dont have this 1.10 Olipro ... 4m where can i get it ..... though i did download the zip file which contains this ROM update utility and other stuff!!!
can u please guide me step by step thanks a lot!!!
thank u
and could u also tell me where can i get jumpspl
i did download --> "RUU_Gene_HSPL.zip "
please help
and can u also tell me wether root refers to my documents???
thx in advance
riddhwaj619 said:
hiii actually i am very new to this flashing and stuff ... and i cant understand ... how to go on with the first step that rom update utility thing!!!
i run it and then at 2% i get the error 270
btw i dont have this 1.10 Olipro ... 4m where can i get it ..... though i did download the zip file which contains this ROM update utility and other stuff!!!
can u please guide me step by step thanks a lot!!!
thank u
and could u also tell me where can i get jumpspl
i did download --> "RUU_Gene_HSPL.zip "
please help
and can u also tell me wether root refers to my documents???
thx in advance
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=363226
See here all the steps are expained
Strangely I'm unable to install some programs [like Kaspersky, Pocket Mechanic, etc] that were earlier working with WM5 !
shahkh said:
I am unable to install root certificate and leaf certificate on my Gene 100. Please tellme how to unlock WM6 or way to install certificate. Diplays error "The certificate was not seccessfully added. Please restart the device and try again". After restart it still does not add.
Click to expand...
Click to collapse
Device has no root certificates installed & I cannot add any.
As such I cannot sync with my Company Exchange server which requires SSL.
transcriber
transcriber is missing
and often (most of the times) ... when i open anything where u have to type something (eg. sms) then the keyboard soes open automatically.
otherwise its justt perfect!!!
(any idea how do i get my smses in a thread>>>>
thx
Audio booster
The audio booster doesnt seem to make any difference to sound. let me know if that is a problem only in my set..
pankaj4u said:
The audio booster doesnt seem to make any difference to sound. let me know if that is a problem only in my set..
Click to expand...
Click to collapse
I used the booster with TCMP to play flv files. Worked fine.
Unable to use USB sync
Hi. I'm not able to use the USB sync to computer after updating the WM 6.0 ROM posted by mun_rus. Any help is appriciated !!!
Issue resolved
cooldnkid said:
Hi. I'm not able to use the USB sync to computer after updating the WM 6.0 ROM posted by mun_rus. Any help is appriciated !!!
Click to expand...
Click to collapse
Dont bother answering. Had to change the settings in activesync on my mobile device...
GPRS
Guys
Can anyone tell me if the GPRS is working on this ROM?
I want to know before i flash! Thanks
GPRS/EDGE Working in MUN_RUS WM6 Rom
^^rac said:
Guys
Can anyone tell me if the GPRS is working on this ROM?
I want to know before i flash! Thanks
Click to expand...
Click to collapse
Yes its work. I am using it now.
Can't record phone call with notes or audio recorder
I've upgraded to wm6 and i've tried to record the phone call but the only voice i hear is mine. In the recording i can hear the other persons voice, but it is so low that i think it's the microphone picking up the sound from the earpiece.
I never tried it to record with wm5, so i don't know if this is specific to wm6 or not.
can anyone confirm?
rexypow said:
after upgraded to WM6 Rom, my Windows Live 10.6.33.0600 (Fixed) (duttythroy) version just can't get connected....gprs,edge,wifi,activesync.....oh my GOD!!!
Any idea?
Click to expand...
Click to collapse
Same problem here... any help?
best keyboard ever
For all the key board problems... here is the best key board which you can get in the windows environment..! works amazing with gene!
here is the link to down load
http://www.freewarepocketpc.net/s.php?querywords=touchpal
there are two versions, beginers try version 1.0 . It might find a little wierd at the begining but bileve me its amazing.! i am using it since 4 months..
Dont forget to watch the video in the link , it shows how to use it.
Enjoyyyyyyyyyyyyyyyyyy