Right now im pretty sure my phone is bricked but even if it isnt just in case i run into trouble i would like a way to restore the original ROM back to the phone Im running keys 1.30 version with the 3.35 rom & radio
What happens if you press the following at the same time:
POWER - CAMERA - RESET
Does this get you to a tri color screen?
Getting it back to "Bell Original" is fairly easy IF you can get a boot loader (tricolor) screen. If you do, then I can email you or post the procedure with the necessary downloads.
Good Luck
Related
Hey, I just tried to install DCD's newest ROM and it looks as if i may of bricked my phone. When i connect it to my PC, Active Sync will not even pick it up. this happened right after i ran Hard-SPL-MFG to unlock the phone... I did try and run the titan_exitbl but no luck. I also attempted to run the relocker but i would not even run.. any ideas?
thanks!
recover from flash
Are you at the 3 color screen? If so you need to unplug the USB and replug it again as per the instructions. You MUST follow the instructions EXACTLY or your flashing will be very scary experience.
If you are not at the 3 color screen, you need to get back to the bootloader by pressing power+camera and soft reset. This will get you to the 3 color screen. Then have a look at the version of bootloader you have. If it doesnt say Olipro 1.20 or 2.40 you still have the locked bootloader and you can flash a stock carrier rom. If you have 2.40 you can flash to the 3.16+ rom and then flash the new radio this way or via sd card install which will be more painless and less scary.
If you dont know what an sd card flash is, I would search the forums here. Over at ppcgeeks you can look up imcokeman's posts and see instructions how to do a sd flash.
If you are are real noob, I would suggest staying with non gps roms at this stage because the change of radio rom needed to enable you to flash a gps rom will almost certainly lead to sleepless nights wondering if you have bricked your machine.
Most important thing to realise is that the machine is almost certainly not bricked. But you might have a few more scary moments before you get your machine back working again. You might also need to call your carriers service desk a number of times to get your provisioning data back working.
Check all the way through these two posts and dont sweat too much. With effort you will get your machine back. The answer to your problems is listed in one of these threads, but you need to dig a fair bit to find it. The posts contain lots of problems that people had flashing this rom, and I am sure your exact problem was there and solved. Its I believe somewhere in the second link I have listed here.
Good luck. i feel for you.
http://forum.xda-developers.com/showthread.php?t=371314
http://forum.xda-developers.com/showthread.php?t=362566 particularly this bit http://forum.xda-developers.com/showpost.php?p=1856032&postcount=216
thanks ill take a look, as a side note i am currently at the verizon logo, i can boot to the bootloader screen (red,green,blue) and when i connect the USB cord it does switch from Serial to USB on the screen... but gets stuck there. Active Sync shows no device connected.... I am running 2.40.Olipro
Thanks again
optyhtp said:
thanks ill take a look, as a side note i am currently at the verizon logo, i can boot to the bootloader screen (red,green,blue) and when i connect the USB cord it does switch from Serial to USB on the screen... but gets stuck there. Active Sync shows no device connected.... I am running 2.40.Olipro
Thanks again
Click to expand...
Click to collapse
It doesn't need to active sync. Once it switches to USB you are ready to flash.
Stuck at Verizon Screen/HTC Mobilty Screen
If you are stuck at the VZW screen then you have only flashed one of the two essential parts. You need both (ROM and RADIO) to make it work. 3.16+ ROM will not work with the old radio. You need 3.27 radio.
Use the camera+power+soft reset and you can flash the one (new radio or new ROM) that you are missing.
See dcd's thread about the 2.3.2 rom. He has added a HUGE new disclaimer.
http://forum.xda-developers.com/showpost.php?p=1952956&postcount=1
Well nothing really worked so i used a sd card to flash back to the stock verizon ROM, i then attempted it again and got it all working!!!
So after having my Mogul for quite sometime, I figured it was time to upgrade the ROM which includes the GPS, etc etc. I followed all the instructions to the "t" and when I go to update it, the phone goes to the tri-color and says "USB" at the bottom...but on my computer, it stays stuck at 0%.
I've left it go for almost 30 minutes. I end up having to shut down the update and reboot my phone. Luckily my phone wasn't affected at all. (whew!) I've tried this three times and all end up being stuck.
I'm new to all this, so ANY help would be greatly appreciated. I've searched for this same occurrence but have not read about any resolutions to the problem.
Thanks for any help!
Anyone have any suggestions?
Right now I have ROM version: 2.09651.3
I have downloaded a ROM for the Quest 'version' of the Mogul which is 3.35.656.2....will this work?
I dont get why it wont update and install the ROM.
Any help is greatly appreciated!
what version of bootloader are you using?
if its not giving you an error try letting it go overnight. Maybe its just going REAL slow.
Other than that, try one of the intermediate ROMs first, or try re-downloading the ROM and going from that.
The process is pretty simple, sync, backup anything important, establish activesync/MWDC connection, run the RUU, press yes several times, restore backup/resync.
Did you ever unlock the phone? The sprint ROMs wont load with an unlocked phone, AFAIK.
not sure what you mean by version of bootloader....
As far as running reall slow, not sure, I might try that if nothing else works.
I'm going to try the 3.35 ROM and see if that works. So stupid that it is such an easy task, yet it doesnt work....and I never "unlocked" the phone...its basically factory straight from Sprint. Again, it was bought back in December 2007 so the ROM on it is pretty 'dated'
I'll let ya know what happens...
2.09... lol.
that rom was slooow. screen flickered.
lockups.
your problem is that you cannot use a rom from a different carrier unless you unlock first. Just get the latest sprint rom and flash it.
edit: perhaps i read your post wrong. do you have the sprint or qwest rom? the qwest rom will not work. the sprint rom should work fine providing the phone has not been unlocked with olipro 1.2. Check the bootloader version when in the tri color screen. if it says olipro 1.2 then you need to update to 2.4.
If it's stock then you should be good. you could try putting the phone into bootloader before running the ruu. sometimes this helps the connection since it doesn't mess with activsync. to get to bootloader hold power + camera and hit the reset button.
First off, I've been flashing my phone for almost a year now. So I don't consider myself too big of a noob. I loaded scrosler's round 4 rom. Worked great! Until I did a soft reset. It put the phone in bootloader mode and I can't boot up at all.
Here's what I have:
Olipro SPL 2.40
Radio 3.42.50
Here's what I've tried to get it out of bootloader:
mtty1.42.exe
titan_exitbl.exe
No success. I'm able to install a ROM, but as soon as it reboots after 100%, it goes right back into bootloader.
Someone please tell me it's not bricked
Try reflashing your radio.
BTC
kill the active sync processes via the task manager, then put the phone back into the usb cradle, run the titan exit bootloader and it should work.
josh77b said:
First off, I've been flashing my phone for almost a year now. So I don't consider myself too big of a noob. I loaded scrosler's round 4 rom. Worked great! Until I did a soft reset. It put the phone in bootloader mode and I can't boot up at all.
Here's what I have:
Olipro SPL 2.40
Radio 3.42.50
Here's what I've tried to get it out of bootloader:
mtty1.42.exe
titan_exitbl.exe
No success. I'm able to install a ROM, but as soon as it reboots after 100%, it goes right back into bootloader.
Someone please tell me it's not bricked
Click to expand...
Click to collapse
If no other suggestion works this will... But it sucks.... Flash a stock rom. I garuntee that will fix the problem. then just flash back. You don't have to flash a VZW ROM and I recommend against it. My new recommended ROM for unlocking and flashing is the Alltel ROM. Its got the latest radio in it (which you already have). Good luck and let us know how it turns out.
thanks for all the suggestions. i'm not sure what exactly went wrong, but i spent about a day and a half just to get it working again. it's somewhat stable now.
after flashing an older dcd rom, i was somehow able to get the OS to boot up, even after the auto soft reset. immediately i wanted to upgrade the bootloader to 2.47 since i've only found it in an exe(only can run from windows mobile) version. I then was able to flash the OEM MR1. Which automatically downgraded my radio. it was definitely the most stable thing i've flashed since the phone got all screwed up. i could soft reset as much as i wanted and didn't get the blue screen of death aka bootloader.
but of course, i couldn't be satisfied with no gps and no internet sharing. i use internet sharing more since i use it when i commute to work on BART (bay area's version of the subway) 50 min each way.
so now i'm on DCD's 3.2.6 ROM with 3.42.50 radio. so far it's somewhat stable. if i soft reset, i get the bootloader sometimes. but a couple solutions to the get the OS to boot back up is
1.) take the battery out for 20-30 seconds and power up
or
2.) take the battery out, plug in the computer usb or power usb with the battery still out. somehow resets the phone? i have no idea.
but i read somewhere that ROM's were causing people to have to take their battery out for 30 seconds to boot up. I doubt it was DCD's ROM's. But who knows, maybe i ran a bad radio file, ROM, or bootloader upgrade, that really caused the initial issues.
My only issue now other than getting the bootloader once in a while is that GPS isn't working. Not that big of a deal for now since I have the Pioneer AVIC F90BT in my car now. but would be nice to have it on my phone (tomtom & google maps) for that one time that might come up when i really need it and i'm not in my car.
again thanks for your help in trying to help a brotha out.
Verizon xv6800 bootloader and startup issues
My issues are, I cant get into the bootloader screen no matter what I try(power, camera and reset). Most times my phone will only go to the verizon screen and then just go white, other times, it may show the WM 6.5 startup screen and the freeze there. This all came from me trying to install WM 6,5 Beta 5 21159 rom from WM 6.1. On another not, my pc will not see my phone. So am I completely screwed? Is there any hope? Thanks in advance for any help.
So, overall, am I screwed?
Anybody have any suggestions?
Thanks
Can anyone help? my phone will not let me into bootloader mode or even startup past the verizon splash screen. I am desperately hoping that its not bricked. Also, the pc to phone usb connection will not see eachother.
My phone will charge via the usb cable to pc. When the wifi switch is turned on, the led on opposite side of the power led will do it green blinking.
Is there anyone that has time and is willing to work with me?
Thanks in advanced.
I have taken the phone apart so that I could push the internal buttons (power, camera and reset) to see if the outer shell buttons were the problem. They werent. I also still can't get past the verizon splash screen. Anyone have any ideas?
Thanks
I you cant get into bootloader you dont have any options.
Ok I have to send my phone in to ATT warranty dept because my screen is flickering like crazy for some reason. It looks like a bad case of VHold on a old CRT monitor. I am currently running Energy ROM and need to reflash to stock. Only problem is I can't read the screen. I did a hard reset on it just to see if it was a software issue. It loads the ROM gets to the align screen and when I try to align it it just seems to reset the align screen after pressing it in the 5 locations. What do I need to do to reload the factory ROM from HTC and is there anything else that needs to be changed? I really do not want to have to pay the $400 dollars they told me I would have to pay if they end up saying it is something I did or if they catch wind I had a cooked ROM on it.
If there is anything else you guys need please let me know so that I can get this issue taken care of.
Here is what shows on the boot screen:
R:1.14.25.05
G:52.63.25.34H
Y:5nergy ROM
Like I said I would be reloading the ROM directly from HTC website so if I recall the radio is included with that ROM but what about the Microsoft .NET Framework 3.5 and Hard-SPL package that was installed to use the cooked ROM? Will they be able to see that was changed or will they even care?
Just reinstall them by the following order:
- Stock ROM (from HTC)
- RadioROM is not needed by the fact that's installed with the stock-ROM
- Flash Stock SPL (at the end of http://forum.xda-developers.com/showthread.php?t=410150)
- Flash Stock ROM again to be sure everything is back to it's original state (After you have flashed the Stock SPL the Stock ROM can also flash it's own (because there are different versions (1,9/5.5/...)) SPL)
Good luck!
okay first off you gotta download the att rom located here http://www.htc.com/us/SupportDownload.aspx?p_id=198&cat=2&dl_id=553 and get ur phone in bootloader mode, to do that take the stylus and old down the volume button down, and press the reset button with the stylus, located near the usb port. then plug your phone into the pc then run the update utlity and follow steps on the pc
Please Can someone help me, I had a friend help me flash my HD2 because I had a dutch version ROM and I really didn't know how to do it myself and it seem working fine not until I got a call but couldn't answer it and the phone got stuck. Each time I reset it wouldn't help, it will gets stuck at htc and won't load up. I did a hard reset and it loaded up but when I tried calling it got stuck again. This morning I tried to flash a new ROM from CleanEX DsE Core ROM Series (6.5.X ManiMore) every thing seems going on well during synchronization from computer. it showed the last ROM being (Miri_HD2_WM65_21914_Sense25_V18.0). But now the phone wont get to a complete start up. I cant hard reset it any more since it keep continuing from the same htc screen spot before battery removal, not giving me the chance to hard reset from power down mode. when I soft reset it once, it got to the point when it ask for my pin code but it went back to the htc screen mode again before completion. now I cant do any thing just staring at the htc screen.
He first flashed the ROM with HSPL. I saw something like SPL 1.42 SPL 1.42.HSPL on the reset screen. Is this suppose to be the correct HSPL number? and how can I go about this, I need all the help please.
Hold the Volume-Down button and switch on. This should get you to the Bootloader Mode.
Run Task29 to clear any latent info on your phone.
Flash the Radio ROM (the Custom ROM will specify which ones to select).
Flash the Custom ROM.
Please read the ROM's page to make sure that your phone will work with that ROM and Radio and all the instructions.