Related
Hey, I just tried to install DCD's newest ROM and it looks as if i may of bricked my phone. When i connect it to my PC, Active Sync will not even pick it up. this happened right after i ran Hard-SPL-MFG to unlock the phone... I did try and run the titan_exitbl but no luck. I also attempted to run the relocker but i would not even run.. any ideas?
thanks!
recover from flash
Are you at the 3 color screen? If so you need to unplug the USB and replug it again as per the instructions. You MUST follow the instructions EXACTLY or your flashing will be very scary experience.
If you are not at the 3 color screen, you need to get back to the bootloader by pressing power+camera and soft reset. This will get you to the 3 color screen. Then have a look at the version of bootloader you have. If it doesnt say Olipro 1.20 or 2.40 you still have the locked bootloader and you can flash a stock carrier rom. If you have 2.40 you can flash to the 3.16+ rom and then flash the new radio this way or via sd card install which will be more painless and less scary.
If you dont know what an sd card flash is, I would search the forums here. Over at ppcgeeks you can look up imcokeman's posts and see instructions how to do a sd flash.
If you are are real noob, I would suggest staying with non gps roms at this stage because the change of radio rom needed to enable you to flash a gps rom will almost certainly lead to sleepless nights wondering if you have bricked your machine.
Most important thing to realise is that the machine is almost certainly not bricked. But you might have a few more scary moments before you get your machine back working again. You might also need to call your carriers service desk a number of times to get your provisioning data back working.
Check all the way through these two posts and dont sweat too much. With effort you will get your machine back. The answer to your problems is listed in one of these threads, but you need to dig a fair bit to find it. The posts contain lots of problems that people had flashing this rom, and I am sure your exact problem was there and solved. Its I believe somewhere in the second link I have listed here.
Good luck. i feel for you.
http://forum.xda-developers.com/showthread.php?t=371314
http://forum.xda-developers.com/showthread.php?t=362566 particularly this bit http://forum.xda-developers.com/showpost.php?p=1856032&postcount=216
thanks ill take a look, as a side note i am currently at the verizon logo, i can boot to the bootloader screen (red,green,blue) and when i connect the USB cord it does switch from Serial to USB on the screen... but gets stuck there. Active Sync shows no device connected.... I am running 2.40.Olipro
Thanks again
optyhtp said:
thanks ill take a look, as a side note i am currently at the verizon logo, i can boot to the bootloader screen (red,green,blue) and when i connect the USB cord it does switch from Serial to USB on the screen... but gets stuck there. Active Sync shows no device connected.... I am running 2.40.Olipro
Thanks again
Click to expand...
Click to collapse
It doesn't need to active sync. Once it switches to USB you are ready to flash.
Stuck at Verizon Screen/HTC Mobilty Screen
If you are stuck at the VZW screen then you have only flashed one of the two essential parts. You need both (ROM and RADIO) to make it work. 3.16+ ROM will not work with the old radio. You need 3.27 radio.
Use the camera+power+soft reset and you can flash the one (new radio or new ROM) that you are missing.
See dcd's thread about the 2.3.2 rom. He has added a HUGE new disclaimer.
http://forum.xda-developers.com/showpost.php?p=1952956&postcount=1
Well nothing really worked so i used a sd card to flash back to the stock verizon ROM, i then attempted it again and got it all working!!!
I have a Sprint HTC touch pro. I unlocked it the day I got it, and have flashed mightyrom6, juicy, and a couple others to it without problem. What I'm seeing now is the ROMs are going very slow, freezing when I just try to read a text message, etc. I have a feeling that some things from the ROMs aren't completely getting wiped when I flash the new ROM. Someone suggested flashing the stock OS to the phone to clear this garbage. Is this a good idea? Does anyone else have this problem, or a solution to it? Thanks
It's definitely worth a try, it worked for me.
I had been trying out all the new 6.5 ROMS out there. At some point it wasn't slow per se, but it would completely freeze, and then I'd have to soft reset. *IF* it got past the loading screen, it would take me to the initial configuration, as though it had been hard reset. I couldn't make it 48 hours without it doing that. Didn't matter which 6.5 ROM I tried, it always did the same thing.
(shameless plug for Sashimi and Makisu! Lifesavers!)
Tried leaving out the microSD card in case it was bad data - no luck.
Tried not configuring anything - just using it as a phone - in case it was a corrupted CAB or something. Not that either.
At the end, I gave up and I was prepared to take it into the Sprint store. (I bought my phone on Ebay, so no idea what kind of success I would have had, if any.) I flashed back to stock rom, installed my cabs and user settings, etc. and waited for it to happen.
It's been over a week now, absolutely no problems.
Long shory stort: flash back to stock ROM and see how it turns out.
Good luck!
weso has a good point...But
Flash back to stock, hard reset.
Flash your ROM of choosing, hard reset
enjoy new Rom
I find after a couple flashes that I need to flash back to stock hard reset then flash new Rom. After that I tend to have a much more enjoyable experience.
Interesting. I wonder if there's any way to explain that, or if we have to put that in the X-files folder - just one of those things.
I also ALWAYS go into the bootloader manually by rebooting with the reset button and holding power and vol-down. Not sure if it makes a difference or just makes me feel better, but I've had zero issues doing it that way, so that's what I keep doing.
Mightyrom6
Hey out there! Can anyone help with this problem I am having. With the MightyRom 6 on the Touch Pro for Sprint? When Touch Flo is enable and you slide the tab to settings and tap All Settings on the bottom left it will go to Connections Only! It will not go to the All Settings screen. Can anyone help me? I know how to edit the registry but, can't find anything out there. Please Help!
Many believe this happens due to not "flash dancing" (flash then hardreset).
Be wary of doing this with generic stock roms, ive had an experiance in which my prl and qcn files were reset to the generic stock ones of a diffrent provider, which in turn got me to take the phone in and get it carrer flashed again ( NO CARRIER SPECFIC ROMS OR STOCK FOR TBAYTEL!!! . god bless tbay tell lol, but anyways after the initial flash of a rom you like, before you load it with cabs install one at a time to ensure proper installation and compatability with your current rom. Also before you run any freshly installed apps/cabs be sure to soft reset after install.
My method of flashing
Ensure battery is above 80%
Fully synced and connected
Freshly rebooted computer and phone
Update/Flash phone
Hardreset after customize and initial setup
Re-configure customise/etc
soft reset
Good to GO!
Also with every flash there is the posability of it just being a bad flash.
in some cases the freezing and such may be pagepool/Driver issue's with your hardware
Hi, my phone was working just fine (i had Miri's HD2 v 19.0 and i think a 2.10 radio). Anyway, I also have a version of Android on my phone that didnt work right (the person on the other end had that robot voice). So I was told that to fix this problem I needed to change around the different ROMs to fix the Android problem. So tonight I flashed the stock ROM back on there (because I read that it's not good to go from cooked ROM to cooked ROM). It completed then just shut off. Nothing. All black screen with not even the light on top working. I just read through the thread below, and the battery is out right now and will stay out for a couple hours then i'll try to put it back in because it seemed to work for that guy. Any other suggestions? Thank you soooo much in advance for any help.
If I cant get it to work at all, it is still under warranty and I have insurance. (When you send your phone in and its under warranty, they send out a phone to you first, then when you get the phone, you send the defective phone back). So I could do that. But since it wont start I wont be able to get HSPL off of there before sending it back. Is everyone 100% sure that HSPL voids your warranty? If so, should I like break the screen or do some other damage to the phone before sending it in?
you havent yet mentioned what model hd2 it is and what stock rom you flashed, and whether you used usb or sd card to flash it, or which version of hspl it was, nothing of any use diagnostically
Its a T-Mobile phone, i used hspl 3 and i flashed through usb. The ROM that I tried to install was "RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship"
I hope this is what you need.
Help needed.!!!
My phone suddenly started turning off today and did the vibrate then freeze on boot issue on me.. (overheating?? far too quickly)
so i thought ok .. i'll put a stock rom back on 3.14 uk (not actually able to download for my serial number from htc.com but i got it off the forum, original rom was 1.66 i think a few months back)
I did this and it still over heats..so i thought i'll remove hspl and put stock spl on to take it for repair/return sell to cex or something.
i got the 3.14 nbh and renamed in LEOIMG and everything was fine an seemed to be flashing ok..
it was at the red/green/blue screen for ages and the text did display spl.304 rather than hspl.. so i thought..cool..its done.. so i removed the battery and put it back in..
BAD MISTAKE!!
i get these errors issues now:
triangle with software update failed try again when i turn it on
0028022 "not allow" text when i go into bootloader
i cant load a rom because i dont seem to have hspl anymore
i get "upgrade rom coded error try again".. on the coloured screen in boatloader
i get critial error bad spl version when i try to use hspl2/3
when i try to flash with stock rom again i get to 2% then get the errors:
invalid vendor id error 294
then goes to software update failed triangle try again
am i basically f**ked???
Did i remove the battery mid flash during the spl bit?
PLEASE PLEASE HELP WISE PEOPLE!!
SHIK1 said:
Help needed.!!!
My phone suddenly started turning off today and did the vibrate then freeze on boot issue on me.. (overheating?? far too quickly)
so i thought ok .. i'll put a stock rom back on 3.14 uk (not actually able to download for my serial number from htc.com but i got it off the forum, original rom was 1.66 i think a few months back)
I did this and it still over heats..so i thought i'll remove hspl and put stock spl on to take it for repair/return sell to cex or something.
i got the 3.14 nbh and renamed in LEOIMG and everything was fine an seemed to be flashing ok..
it was at the red/green/blue screen for ages and the text did display spl.304 rather than hspl.. so i thought..cool..its done.. so i removed the battery and put it back in..
BAD MISTAKE!!
i get these errors issues now:
triangle with software update failed try again when i turn it on
0028022 "not allow" text when i go into bootloader
i cant load a rom because i dont seem to have hspl anymore
i get "upgrade rom coded error try again".. on the coloured screen in boatloader
i get critial error bad spl version when i try to use hspl2/3
when i try to flash with stock rom again i get to 2% then get the errors:
invalid vendor id error 294
then goes to software update failed triangle try again
am i basically f**ked???
Did i remove the battery mid flash during the spl bit?
PLEASE PLEASE HELP WISE PEOPLE!!
Click to expand...
Click to collapse
****.... tough luck mate....
As long as u got rid of hspl you should be able to get the phone fixed by htc or tmobilie or whatever plan ur on..
Good luck
bought it off ebay..so cant really take it to my provider..the phone is over (just) a year old so probably not in htc warranty? how do i check?
i will donate money to anyones paypal account if they can help fix this
Install the correct stock ROM (the one who match with your S/N) over SD.
how do i know which matches? and how do i do it via sd?
SHIK1 said:
how do i know which matches? and how do i do it via sd?
Click to expand...
Click to collapse
Put in your serial no of your phone (found underneath the battery) into the HTC support website and you will find the ROM that matches your phone. You will then need to download the ROM, extract it and take the .img file out of it and rename it as LEOIMG as before and flash via SD card.
shouldn't even need to use sd card. the correct rom should downgrade the spl over usb.
phone into bootloader,connect usb, run your update .exe, done.
you are guilty of getting over excited and lack of research. five minutes should have told you that you can't use hspl to install 3.14, and that flashing from sd first removes hspl,changes spl, then runs the compatibility tests again and shows exclamation mark if it fails.
I had the same problem i thought i bricked my htc which i was testing before buying i know stupid idea brick the phone before i buy it, basically i had installed hspl 2.08 from 1.42.00 and installed the froyo ROM build which was all good it was working but running really slowly, i couldnt get the ringtone to change which was probably due to the fact that the build did not come with any preinstalled which is fine as i downloaded a ring on mp3 and set it as that, and the radio was one of the latest which wasnt giving me a good reception so i decided, fine that's ok let me get my hands on some apps now so i downloaded a couple tweaks, multiboot and games and put them on my sd card; as well as a tweak to enhance the speed as it was going really slowly on the android, the second i put my sd card into the phone and tried running metamorph an app i was advised to use to apply a windows 7 mobile theme the phone went blank, the only way to get the phone into tri coloured screen mode was to plug it in via the FRONT usb port of my machine which would bring my phone back to life.........oh so i thought, so i was able to see the phone load up to htc white load screen and it would display my buil in red BUT after that it should show the "quietly something something message" and load right.....WRONG the phone just restarted and it would just do the same thing go to htc and restart so i managed to use the vol down+cancel call button to kick it into the tri coloured screen and managed to get the phone back into hspl 1.42.00 which completed but then i still couldnt get past the htc welcome screen!! ARGHH!!! So after spending a whole night applying different hspl's and trying to reflash teh rom via usb and failing i thought id give up and just pay for a bricked phone which i was paying £150 for btw (i know a bargain and brand new!!!) BUT as i came into work today i thought let me try a different pc as that may affect it, and after i downloaded an official ROM update for the phone 1.72 i i plugged my phone in and after literally 20 seconds the bloody thing turned on and started working as normal with no multiboot or rom installed i think i shall be CAREFULLY installing android on the phone one last time. . . . I hope this helped any users out there as i was panicking, and please remember that whatever you do is seriously AT YOUR OWN RISK, do not just jump the gun...sit down do some proper reading and watch some videos because after having to trouble shoot i must say im pretty good at applying roms hahahah i shall be very cautious from now on though. . .. sorry if the post was too long i am a noob my first post!!
yes.. i managed to fix it.. the same way kurt willems above mentioned... i installed the stock voda rom that matched my serial number.. kurt send me you paypal email and i'll bung a few quid in for your help..
gonna swap this phone for the galaxy s... good swap?
So u managed to save ur HD2 and now u wanna swap it?
keep HD2. Its great, and so many possibilities. U must know what ur doing, tho (kindof)
Also, his link for donation is everywhere. 'DONATE' 'DONATE TO ME' 'If you like my work buy me a beer'
haha..oh yes missed the donate button..
im a bit sick of the winmo set up... it's just abit too fiddly with soo many settings to mess with..plus the handset gets hot too quickly recently and turns off, vibrates when i turn it on and freezes... need to get rid before it gets worse.. cant be bothered with the hassle.... besides.. i like the android phones..so ill go back to them...
right im having some real issues now, i decided NOT to mod my phone again, because once my phone started up again i had to insert the simcard so i turned the phone completely off took out the batt and re-inserted the simcard and then it was bricked again (htc welcome screen, then restarts then back to htc welcome screen and repeat) after that i tried another go at installing the hspl again i just took a random version tbh and tried that as mine is factory unlocked uk htc, and then it failed i then took out the battery and notice that the spokes that connect to the metal part of the battery was a bit crooked so i carefully reseated the battery and hey presto its working again ( i can get into the phone home screen etc) so i quickly downloaded the origional spl from theunlockr"dot"co(m)/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/ and installed it and then gave the phone a factory reset and now it seems to be back to how it would be if it was brand new but now im in a dilemma as i dont know which spl to use as well as what rom is best suited for teh spl and radio because i do not want to brick my phone again because if it does i will end up going back to the phone that has lasted me the longest nokia 6200 XD
aminuli said:
right im having some real issues now, i decided NOT to mod my phone again, because once my phone started up again i had to insert the simcard so i turned the phone completely off took out the batt and re-inserted the simcard and then it was bricked again (htc welcome screen, then restarts then back to htc welcome screen and repeat) after that i tried another go at installing the hspl again i just took a random version tbh and tried that as mine is factory unlocked uk htc, and then it failed i then took out the battery and notice that the spokes that connect to the metal part of the battery was a bit crooked so i carefully reseated the battery and hey presto its working again ( i can get into the phone home screen etc) so i quickly downloaded the origional spl from theunlockr"dot"co(m)/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/ and installed it and then gave the phone a factory reset and now it seems to be back to how it would be if it was brand new but now im in a dilemma as i dont know which spl to use as well as what rom is best suited for teh spl and radio because i do not want to brick my phone again because if it does i will end up going back to the phone that has lasted me the longest nokia 6200 XD
Click to expand...
Click to collapse
Firstly you haven't bricked your phone. Bricking your phone means that it is reactive as a brick - it does not switch on.
To get the latest standard ROM, then go to the HTC website for your area, select the ROM you require and enter your phone's serial number. If you are entitled to use that ROM, then it will download. If not then you will get an error message. You may have to select your operator's version of the ROM.
fred_up said:
Firstly you haven't bricked your phone. Bricking your phone means that it is reactive as a brick - it does not switch on.
To get the latest standard ROM, then go to the HTC website for your area, select the ROM you require and enter your phone's serial number. If you are entitled to use that ROM, then it will download. If not then you will get an error message. You may have to select your operator's version of the ROM.
Click to expand...
Click to collapse
ok the phone failed to boot up, I did go to htc's website and i did type in my serial number yet i got an error for each rom i chose so i ended up just downloading one im pretty sure mine came with 1.42 originally its working fine now just need to try out a new radio and re install the rom
aminuli said:
ok the phone failed to boot up, I did go to htc's website and i did type in my serial number yet i got an error for each rom i chose so i ended up just downloading one im pretty sure mine came with 1.42 originally its working fine now just need to try out a new radio and re install the rom
Click to expand...
Click to collapse
Assuming, from your icons, that the HD2 is locked to O2; therefore you should be able to download the O2 1.72 ROM (no HSPL required) and it will not invalidate your warranty.
nope thats just what tariff i am using. . .Ive been looking around and now im qutie confused i thought the process for having android on the htc was literally
Download a hspl and install - reset
Download a radio and install - reset
Run CLCARD.EXE then HARET.EXE and presto were in android, now unless something has changed is this right because im about to.
Download hspl3 and install - reset
Download radio and install - reset
Download a ROM and install and - reset
now is this the neccessary steps or am i about to mess up my phone again =.=
It would be helpful to know which ROM, RADIO and SPL you already have.
As for running Android, all that is pre-required is that you have the minimum .50 RADIO (it should be specified in the Android ROM's page). Although flashing the newest RADIO (2.15.50.14) won't do any harm.
Although I am with T-Mobile UK, I have the HTC 1.66WWE ROM, 2.15.50.14 RADIO and 1.66HSPL (via HSPL2). I downloaded an Android version and installed it on the SD Card. It works fine. Since I only tried it a couple of times, I can say that it boots and generally works. But I prefer WimMo.
SHIK1 said:
yes.. i managed to fix it.. the same way kurt willems above mentioned... i installed the stock voda rom that matched my serial number.. kurt send me you paypal email and i'll bung a few quid in for your help..
gonna swap this phone for the galaxy s... good swap?
Click to expand...
Click to collapse
If you want android only (wich i would), yes swap it.
done... galaxy is awesome..so beautiful...quiality samsung os + android
never ever getting a winmo phone again ..had 3.. all fiddley beyond belief...
I've been searching on how to completely restore my (T-Mobile) HD2 on this forum for a while and haven't came to it, so sorry if I'm repeating any threads.
Basically I'm fairly novice in flashing and things in that nature. I've been flashing updating Energy ROMs on my HD2 for about six months since I got the phone. Which was fairly simple to do. Since WP7 ROMs, I've switched over to flashing those. The problem is that 99%, it'll flash fine, then won't get past the boot screen. And on the rare occasion it does get past it, I can't turn it off, or else I'll have to trying getting past the screen 1000 more times to be successful. I think I have all the requirements to run WP7, but not exactly sure.
So I would like to know what to download and flash/ install for it to be as if I bought this from T-Mobile today.
Thanks!
I need help with this too..I craked my screen and am going to send it to t-Mobile so they can send me a new one, but I want to put it to factory reset. Ive looked all over cant find them...the post a couple up...links are dead
you do realize that if you cracked your screen your warranty is already void. it doesn't matter what software you are running at this point.
diazjohn said:
you do realize that if you cracked your screen your warranty is already void. it doesn't matter what software you are running at this point.
Click to expand...
Click to collapse
Maybe they have the insurance feature?
Late answer, but go herehttp://www.t-mobile.com/wmupgrade/ to get stock ROM.
follow steps here http://forum.xda-developers.com/showthread.php?t=623402
your done.
how_weird said:
Late answer, but go herehttp://www.t-mobile.com/wmupgrade/ to get stock ROM.
follow steps here http://forum.xda-developers.com/showthread.php?t=623402
your done.
Click to expand...
Click to collapse
Sorry for MY late reply, but I put this phone away for a while and now my dad wants to use it. I've gone though the steps, but I can't get past "6. Hold the volume down key and power on your phone. As soon as the coloured screen changes to grey, RELEASE volume down." It never turns grey. I'm one step from taking this phone and throwing it out my window to see it shatter.
art0605 said:
I've been searching on how to completely restore my (T-Mobile) HD2 on this forum for a while and haven't came to it, so sorry if I'm repeating any threads.
Basically I'm fairly novice in flashing and things in that nature. I've been flashing updating Energy ROMs on my HD2 for about six months since I got the phone. Which was fairly simple to do. Since WP7 ROMs, I've switched over to flashing those. The problem is that 99%, it'll flash fine, then won't get past the boot screen. And on the rare occasion it does get past it, I can't turn it off, or else I'll have to trying getting past the screen 1000 more times to be successful. I think I have all the requirements to run WP7, but not exactly sure.
So I would like to know what to download and flash/ install for it to be as if I bought this from T-Mobile today.
Thanks!
Click to expand...
Click to collapse
I have done a dozen of flashings on my Tmobile HD2 and works fine so far. Thanks to XDA forum all the tools I need are available right here on XDA !!! You just to search them out yourself (sorry I don't have the links ....... ).
I suppose you know how to flash your phone so I will not explain details how to do it.
In brief, to install WP7 this is what I suggest you should do -
1. Update flash radio to the latest available update from Tmobile US website, regardless of what ROM you have at present (version 2.15.50.14 is the latest, I think).
2. Flash HSPL 2.08 to your phone to maximize 576 RAM usage, if you have it (do not use SPL 2.08.000 as this will recognize only 448 RAM size).
2. Use Task29 to clean out the existing the existing ROM on your phone (this will erase your OS and you will only be booting on the white HTC logo screen). This will clear out those ROM leftovers on your phone.
3. Flash magdlr 1.12 or 1.13 on your phone (press power button on boot to show magdlr menu).
4. On magdlr menu scroll down to no.5 USB flasher, connect your phone to pc and run dwi.exe on your WP7 installer and wait till installation has completed.
I have done these procedures a dozen times already I have not encountered problems so far. I have been flashing and flashing to choose the best ROM (WP7 or WM6.5.x) I want. On personal note, I think I would settle for WM6.5.x cooked ROMs because of usability and handiness (I find WP7 too complicated to deal in terms of tweaks and handling of personal videos/photos file security).
Some notes:
a. You need to flash radio and HSPL only once.
b. Use Task29 every time you need to install a new ROM (your choice, but recommended).
c. After Task29 you can start out clean and flash to stock ROM or any other rom you choose.
d. There are dozens of videos on YouTube to help you flash but I have not seen one using Task29 to start the process of flashing.
This works for me, hope it does to you as well. Good luck !!!