Hello all,
Just managed to purchase a Kaiser for the measly sum of $400.00 AUD. Woo Hoo !!!
Now i was wondering. Are my Hermes batteries and desktop charger going to fit the Kaiser?
not the same indeed.
Related
Hi
I'm about to sell my xdaII to buy an xdaIIi
Is the connector the same?
I want to be able to use my spare cradle, rechargers, car kit etc.
Any advice on this would be appreciated,
Thanks
Conor
The cradle is identical. I bought an XDAIIi a couple of weeks ago, and am still using the XDA 2 cradle.
Even the batteries are exactly the same size, although the XDA2i one has 100 mAH more. Probably interchangeable, but I haven't tried it.
Excellent!
That's good news then!
Thanks a million!
everything is the same, even the backpak,(with the driver) the batey is also fine, OK 100 M/A less power, but any battery meter program works and gives the corect remainding times
John
Hello all,
After upgrading to the o2 XDA exec, my much loved Holux Powered cradle and GPS receiver is now redundant
So one of you lucky peeps has the opportunity to buy it off me at a knock down price
I used it with my xda2s - I do NOT know if it works with other xda's.
Here is a link about it:
http://www.totalgps.com/Holux-Powered-GPS-PDA-Mount-for-XDA-Series-I-Mate-Q-Tec-2020.aspx
It powers your xda2s, and is a powered GPS receiver all in one. No more cables all over the place! It's offical name is Holux CR-100.
It's RRP is £90 +p&p.....I would be looking for at least half that. And I believe it is now discontinued (at least it is from totalgps.com).
It is in perfect condition, still with the box and all bits and docs.
HOWEVER!!!!! I had it hard wired to my car.......SO, either hard wire it to yours, or re-attach the cigarette bit, which I still have.
Payment via paypal please......first come first served....
Any questions I'll be happy to answer.
Cheers
HPJ
Great site with tonnes of info, anyway. I picked up a wallaby recently for very little $, i coulnt find the charger for it. Ive seen a pinout on this site to make a usb conection which is wonderful. But i was wondering if anyone had any info on other phone chargers that would work with the wallaby?? It seems that getting a proper charger in Australia isnt as easy as i'd hoped.
Yay, answered my own question, got a car charger and this wallaby works, For $5 im not complaing, time to look and see what to get software wise, awesome device!
I note the thread below for the cradle for Tmob TP2 but was wondering if anyone has bought/tried/tested the official HTC desktop cradle and its options (outputs etc)
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=179339
Its about £34 in the UK and I'm just weighing up whether its worth the cost.
Many thanks
Andy
I took a hacksaw & a Dremmel to my Diamond cradle.
It might look a bit ropey when the phone isn't in it but I'm not there then!
When I am there the phone is init and it looks fine
Have my TP2 in the post and have ordered one of these:
http://www.amazon.co.uk/Desktop-Syn...UTF8&coliid=I31X9GZN1VRZW6&colid=9MBV0NZ7B0IZ
Looks similar to the one my Kaiser's sat in at the mo so should be ok.
Sampler said:
Have my TP2 in the post and have ordered one of these:
http://www.amazon.co.uk/Desktop-Syn...UTF8&coliid=I31X9GZN1VRZW6&colid=9MBV0NZ7B0IZ
Looks similar to the one my Kaiser's sat in at the mo so should be ok.
Click to expand...
Click to collapse
Not bad at all! Let us know how it goes mate if thats ok!
Andy
I bought the OEM Cradle about a month ago, its much bigger than I expected and attacts dust worse than my PS3 but it looks great.
I've got the TV out plugged in as well as the AC charger and it works fine
Only downside I've found is that if you have any case on your phone it wont fit in the holder. Bought a silcone case after I dropped it and scrached the chome, now I have to take the case off everytime I want to charge
I've been trying to find an HTC Made one specifically with the combination USB *and* battery charger slot as were available for the HTC 6700/Mogul [part # CRU 6800) ie not one of the cheapies after market with pretty shoddy battery fit..
Can't tell from the photo if the CRG 300 is that, or simply a USB charger cradle without the battery charger slot ?
http://www.windowsmobilenow.com/us/p_wm_acc1.aspx?i=179445&partner=wmusfroogle
Any ideas/suggestions ? I bought my girlfriend one of the aftermarket versions for her ATT Tilt and it's been horrible.
andyhud007 said:
I note the thread below for the cradle for Tmob TP2 but was wondering if anyone has bought/tried/tested the official HTC desktop cradle and its options (outputs etc)
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=179339
Its about £34 in the UK and I'm just weighing up whether its worth the cost.
Many thanks
Andy
Click to expand...
Click to collapse
jbsf said:
I've been trying to find an HTC Made one specifically with the combination USB *and* battery charger slot as were available for the HTC 6700/Mogul [part # CRU 6800) ie not one of the cheapies after market with pretty shoddy battery fit..
Can't tell from the photo if the CRG 300 is that, or simply a USB charger cradle without the battery charger slot ?
http://www.windowsmobilenow.com/us/p_wm_acc1.aspx?i=179445&partner=wmusfroogle
Any ideas/suggestions ? I bought my girlfriend one of the aftermarket versions for her ATT Tilt and it's been horrible.
Click to expand...
Click to collapse
well here is one that i found for the t-moble/gsm version
http://www.amazon.com/Battery-Europ...1?ie=UTF8&s=electronics&qid=1255140473&sr=8-1
it seems pretty nice, got 2 usb ports, one for charging the other for computer, and even an audio out. got the second battery charger as well. i have the cdma tp2 so i am awaiting an equivalent version. check it out though you may like it
Hi,
I bought my Omate in real life to someone who just got it from a gift. And I semi-broke the charger, I'm forced to use elastics for the time being to charge my Omate, because it isn't fitting anymore.
Do I have any solution in having a new charger for my Omate?
I bought a charger for the Simvalley AW414, unfortunately, the case isn't the same and my Truesmart doesn't match. How can I do?
Ok for those who wonder how I did, I found a link to buy it, and there were only one remaining !
Am so lucky, I guess :') !
I can use my Omate again, and safely !! Youhouuu ^^!
https://www.smartwatchmarket.eu/en/accessories/3-ocharger-for-the-omate-truesmart.html