Hi. new nOOb here.. i just bougt my (new) qtek s200 with wm5 and i really want to get wm6. but how. i can se you have guides here. but i can`t gem them to work... can i install a original wm6 rom on it. or do i need to use a custom rom..
can i download a rom from here and just use it. is there a danish wm6.
please help
can anyone make a total noob guide howto get my and others s200 to get wm6 on it..
oh does i work lige wm5 or is it a (hack)
hope i bear over with me (bad english) and dumb questions
bedst regards bo
bloodking said:
Hi. new nOOb here.. i just bougt my (new) qtek s200 with wm5 and i really want to get wm6. but how. i can se you have guides here. but i can`t gem them to work... can i install a original wm6 rom on it. or do i need to use a custom rom..
can i download a rom from here and just use it. is there a danish wm6.
please help
can anyone make a total noob guide howto get my and others s200 to get wm6 on it..
oh does i work lige wm5 or is it a (hack)
hope i bear over with me (bad english) and dumb questions
bedst regards bo
Click to expand...
Click to collapse
Hi bloodking
du kan prøve min Coffie rom den er på dansk og flere andre sprog, men du må læse lidt om hvordan du flasher en rom og du må også læse lidt om hvordan du Hard SPL din Qutek. der er ingen orginal WM6 Prophet rom så du må til at flashe min om den skal være dansk. men om du kan leve med engelsk så er der rigtig mange versioner at vælge mellem. Coffie rom har næsten alle funktionerne som den ny HTC Touch dual har. Men husk det viktigeste er at du læser lidt for to flasher en rom så du ikki får problemer med din Qutek.
sorry for answering in danish but he was asking for a danish version.
Related
I am wondering if there is an upgrade ROM 1.66 for QteK2020 an d if so
where can i download it ?
Thanks
http://pocketpcdubai.com/
Rudegar har du installeret den nye ROM du henviser til og virker den i så fald? O2 var jo et flop, er der tale om samme ROM?
Official site for QTEK for upgrades?
Thanks, but that link is not an upgrade for a Qtek 2020. Do you know one to upgrade it, without cooking roms? I'm new in using this device and I'm note comfortable in "hacking" it. I'm seeing that the support for the Qtek is the worst of all! They are always the last ones to provide the upgrades. By the way the one that i could manage to download was from third party site. What is the official one?
Thanks.
Hi,
Did not see this yet, so with the help of the german one, I made a dutch version.
( Aquiring the required files actually bricked my hermes, but thank god for the invention of kitl resque!)
JP
Ok, I installed the cab and what to do next? After a soft reset nothing happend. Also after a hard reset nothing happends.
@ dutch: wat doet het capje? De taal omzetten van engels naar NL?
It only changes the input language to dutch.
So for example your word completion in a sms is now dutch instead of english
(that is if you had a english os
Ok, I see. Works perfect! That saves a lot of time to delete and copy the stats, dic etc. files to the windows map and changing the registery!
Thanks!
:S
Ik heb de VARIO II met WM6 LVSW 20 maart versie
De Cab WM 6 kan niet worden geinstaleerd, maar wel die van Cab WM 5 aleen dit veranderd niets in mijn wordenlijst alles blijft engels. Ik wil toch echt graag een woordenaanvulling in het nederlands
Moet ik miesschien nog ergens wat instellen nadat ik de CAB heb geinstalleerd?
Alvast heel erg bedankt!
I have a VARIO II with WM6 LVSW 20 march edition
I can not instal the WM6 CAB successful. When i try it with the WM5 Cab the installation is successful but there is no dutch language in my wordlist. Everything stays english. Must i click somethin in the settings?
thnx in advance.
@POF i hope you like this now! I guess the people can understand now what i mean...
I am using the wm6 cab myself on the same lvsw rom.
Have no idea why it does not work for you, please tell me if and what errors you get.
The wm5 version will for sure not work on wm6.
(sorry pof, should have known better)
Si aqui cadascú parla amb el seu idioma no ens entendrem, una mica de respecte si us plau i parleu amb anglés.
Sorry for not writing in english!
pof said:
Si aqui cadascú parla amb el seu idioma no ens entendrem, una mica de respecte si us plau i parleu amb anglés.
Sorry for not writing in english!
Click to expand...
Click to collapse
My english writing is so bad that i could not explain that story fast in english i thought it would not be so bad cause it was more something for the dutchpeople so thats the whay i don't wrote. So im sorry for that.
But i wil write from now on in english i hope you understand what i mean.
@jpvdp
I put the WM6 Cab on my storage card. After the installation it says : Installation of Dutch Language WM6.cab was unsuccessful.
I have download it again but it wont install successfully.
thats my problem. maybe i do something wrong :S
I have download it a third time. Now it is working! Thnx Jpvdp for the handy CAB
works OK on Prophet with WM6
Installed the wm6 cab on my Prophet and it works fine.
Nice job!
Guess it is wm6 dedicated, not pda.
Great! Very very very usefull and timesaving!
Installed here on WM6 Tytn.
They should build you a statue for this.
Hi, I see there are alot of Dutch folks here, hi there!
Lets try out this cab.
works on fine on my wizard
TNX!!
Works fine on my T-mobile Compact 3 too
Thanks!
Gwystyl said:
Works fine on my T-mobile Compact 3 too
Click to expand...
Click to collapse
Loving it, works like a charm. Thanks a million.
Does not work on my Eten-X500+
Hi..
I have an Eten X500+ and try to install the Dutch input cab. Does install, does say it is OK but when I soft reset after install there is only English stuff for input. I also do not have an uninstallable item in remove programs.
Any idea ?? The installer only tells me that there is no guarantee that it will work because it is build for an older Win version.
My version is:
5.2.318 (build 15342.0.0.0)
Is there perhaps a newer .cab available somewhere ?
Thanks!!! Danny
en bedankt, werkt perfect
for the english people that cant read dutch
Thanks, works perfect
any advice on getting to this to work on a typhoon with wm6 installed. I can't get any dutch words to come up in the predicitive text. Is there something else I need to do?
working fine on a mio A701 WM6
thanks
Works excellent on my MDA Vario II with the lastest schaps rom
Does anyone know if this also works on a TyTn II with WM 6.1 ROM ?
I am stuck at the bootloader screen. My G4 Prophet was running PDAViet Mysterious fine. I tried an update to [WM6.1] Prophet ShadoW 2.0 TE, update process went normally and said it finished without errors. The phone however is now stuck at the three color bootloader screen. The old update guide says about this:
If your device doesn't connect to your PC after flash,just enter bootloader(press camera button+while pressing soft reset and hold,until a tri-color screen shows up),and flash the NoVendor WM5 Rom: http://rapidshare.com/files/17208693...24721_NVID.exe .Then repeat the whole process...
Click to expand...
Click to collapse
But the NVID rom is no longer available under that RS link.
Then I had a look at the "New WM6 Upgrade Guide" where it talks about HardSPL. When I tried running HardSPL.bat it gave me an "No Device Connected" error.
Could you help me out please?
it's because you didn't read how to upgrade it..
you have to HARDSPL or jumpspl first, if you want to upgrade with new methode..
When you get stuck at 3 bootloader mode, you have to make it with PDA VIET TEMP or NVID.
here is the link for PDA VIET TEMP
http://rapidshare.com/files/72839727/Prophet_PV_Temp2.rar
and you wil get WM5 no vendor.
So after that.. HARD SPL first..
WICHTIG!!!!!!!!!!!!!!
after that flash your new ROM.
Animelover have translate it in German.. HOW TO HARD SPL
http://forum.xda-developers.com/showthread.php?t=350033
Warum liest man nicht zuerst die Anleitung, wie man was machen soll..
varanusvincent said:
http://rapidshare.com/files/72839727/Prophet_PV_Temp2.rar
Click to expand...
Click to collapse
thanks for this link
varanusvincent said:
Warum liest man nicht zuerst die Anleitung, wie man was machen soll..
Click to expand...
Click to collapse
Hab halt in der Vergangenheit immer mit der selben (alten) Methode geupdated. Dass es ne neue Methode gibt hab ueberhaupt erst bemerkt nachdems halt schon zu spaet war.
Na wenn du so oft PPCs flashst wie ich wirst du halt irgendwann sorglos Aber is ja jetzt alles geklaert, danke fuer den Link nochmal
kein problem... Viel spass beim flashen...
yoda_143 said:
I am stuck at the bootloader screen. My G4 Prophet was running PDAViet Mysterious fine. I tried an update to [WM6.1] Prophet ShadoW 2.0 TE, update process went normally and said it finished without errors. The phone however is now stuck at the three color bootloader screen. The old update guide says about this:
But the NVID rom is no longer available under that RS link.
Then I had a look at the "New WM6 Upgrade Guide" where it talks about HardSPL. When I tried running HardSPL.bat it gave me an "No Device Connected" error.
Could you help me out please?
Click to expand...
Click to collapse
Or... try the link in my signature~~~ Good Luck~~~
all done already, running nice new WM6.1
thanks for the quick help again
many thanks bro' for infos - greetings from Romania
varanusvincent said:
it's because you didn't read how to upgrade it..
you have to HARDSPL or jumpspl first, if you want to upgrade with new methode..
When you get stuck at 3 bootloader mode, you have to make it with PDA VIET TEMP or NVID.
here is the link for PDA VIET TEMP
http://rapidshare.com/files/72839727/Prophet_PV_Temp2.rar
and you wil get WM5 no vendor.
So after that.. HARD SPL first..
WICHTIG!!!!!!!!!!!!!!
after that flash your new ROM.
Animelover have translate it in German.. HOW TO HARD SPL
http://forum.xda-developers.com/showthread.php?t=350033
Warum liest man nicht zuerst die Anleitung, wie man was machen soll..
Click to expand...
Click to collapse
i did it!!!!!!!!
my device stuck at bootloader screen and i learned from xda forum and i fix my problem.god bless u guys
i think i late to know about this fantastic prophet, but you all save my prophet. i learned from your posting and my prophet revived from die, thanks all
Hello,
I upgraded to WM6.5 from billabong_staff, but it works so f*cking slow, I want to downgrade back to Wm6.1. But I want the official one from HTC. Where can I find it?
Thanks in advance.
I need it too ....
Same reason as Lacoste
I don't know why I even bother
lacoste1689 said:
Hello,
I upgraded to WM6.5 from billabong_staff, but it works so f*cking slow, I want to downgrade back to Wm6.1. But I want the official one from HTC. Where can I find it?
Thanks in advance.
Click to expand...
Click to collapse
meenjedatnou said:
I need it too ....
Same reason as Lacoste
Click to expand...
Click to collapse
You say it's slow. Funny. Miniterror doesn't seem to think that way.
But hey, you don't like it, don't use it. Period. I don't know why I even bother doing multilanguage ROMs for such ungrateful people.
Best regards,
what is slow abaout it?
can you guys enlighten me wich part of the iomega rom is slow?
i have three htcdevices under my guards and they are all the same with speed?
does this mean i have three crappy htc devicesot have you done something wrong with youre flashing?
tell me wich part is slow and i will check but the iolite is in use by my girlfriend and she isnt easy to please but i havnt heard any complaints form here
i have played with the phone mself and also didnt found it slow
maybe i can help
best regards
miniterror
Well, i also am interested in that, since i have not seen a decrease in performance by going to this rom, but actually the opposite!
There are some slowdowns sometimes, but it was the same if not worse in 6.1...
Someone with two devices should make a comparative video of 6.1 and 6.5 i guess...
I remember comparing two Vox, one with the 6.1, and one with the 6.5, and the difference was night and day (in favor of 6.5).
This may not be as visible with our iolites, but my feeling is that it is faster with 6.5...
billabongstaff, i flashed it again ..... and now its very good!
I have only one little thing, no sound or vibration when i recieve a sms text message....
But, sorry for the complains i made earlier it's very good now
RESPECT!
Hi Billabongstaff,
I'm sorry for my complains, but you know what it is?... The most annoying thing about the Rom is that my phone doensn't vibrate if i recieve a text message. It vibrates when i turn my phone out of sleep. And then i see a textmessage what is urgent from 2 hours ago. And i dont like all the extra programs. Sometimes my phone runs at 46% and then he doesn't react anymore.
If you have a dutch version of 6.5 with less programs and a vibrating textmessage option, i use it. I really appriciate the things you do for us at XDA, i really mean that.
Hope to see a reaction.
Upload Dutch rom
Aangepaste Iolite wm6.1 NLD
Dumped my 6.1 dutch rom and cooked a nbh file.
Unpack rar and run the customRuu.exe
In the rar file extra cab's added manlia2d files and tt7.915 patch.
install order htc mega, htc hero clock, md2d.
Copy the tt files to navigator folder.
Peter
pvdvlies,
I flashed your posted rom, now my phone is dead
only black screen !!!
Get real...
To everyone above complaining:
1.Before flashing a ROM learn how to do it.
2.Before blaming someone try to figure who's actually to blame.
3.Turn on sms wake up event in the reg edit - this is fully described in 6.5 rom thread.
erg vervelend
Ik heb de rom zelf nu 2 keer terug gezet om andere roms te proberen en succesvol.
Waar gaat het fout?
Bij het laden, uitpakken, opstarten......
Zet de telefoon in bootmode en probeer de rom opniuew te laden.
vr.gr. Peter
Ik heb zelfs de download nog een keertje gedaan en op de telefoon gezet. En hij blijft nu inderdaad hangen op het startscherm
Ik zal vannavond nog een keertje een upload doen en deze testen voordat ik de link publiceer.
Nogmaals excuus ik probeer het op te lossen.
Petr
New dutch rom
This one is tested.
First go to bootmode.
Switch on the Phone by Pressing On and Volume button.
Run the CustomRUU.exe.
After installing wait a few minutes then the phone will startup.
http://rapidshare.com/files/304513204/Iolite61NLD.rar
After installing you may install the additional cabs from the download.
1 - install HTC_Mega_2DManila_2.0.19171723.00.cab
2 - install HTC Manila2D Hero Clock.cab
3 - install M2DC_v0.29.235.CAB
4 - Copy files from ttcrack to programmabestanden/navigator
regards Peter
Peter,
Bedankt!
Ik zal deze nu downloaden.....maar zie net dat die vorige versie ook een diamond laat zien als ik de RUU.exe open, of maakt dat niks uit?
John
Hello. there as been some big discussion about this matter , because some people say that works, others say no. Iam willing to buy that software, but i would like to have some feedback about other users that bought it and tested it. Its true that that PSAS method(with the non-cracked version, ie, with the bought version at PSAS website) will work?? iam confused. Anyone that had success?? thanks
yes u can,i chage my german rom to wwe with psas
please take a look at http://forum.xda-developers.com/showthread.php?t=647737
I have recently flashed my ROM on a Mega (Touch2) from T-mobile dutch to HTC dutch.
I used PSAS and it worked perfectly!! And Quick!
greetz,
Franka
hoi,
mag ik weten hoe je dat heb gedaan.
kunt je me de psas opsturen
alvast bedank
zzumbaito said:
hoi,
mag ik weten hoe je dat heb gedaan.
kunt je me de psas opsturen
alvast bedank
Click to expand...
Click to collapse
Dude, only English is allowed here.