Hi guys,
Thought I'd post up here before I stick them on ebay, sent my orbit back for the rubber jog dial replacement and they sent me a brand new boxed Orbit 2 with all the accessories...
If anyone needs anything;
Box + all original packageing,
Cool car charger (stubby with LED)
Car Cradle,
Headphones
Copilot CD's and Serial number, X2
suede case,
1gb Card,
Stylus,
Mains charger,
Usb lead...
Send me an email or PM with an offer and I'll get back to you...
Can paypal me too...
Cheers!
Dan
I think I read somewhere that they will recall 'something' for customers. I think the discussion was about Copilot and how some people had more than one copy.
So maybe it just worth holding tight for a bit just in case especially the Copilot stuff.
biscuitboy said:
Hi guys,
Thought I'd post up here before I stick them on ebay, sent my orbit back for the rubber jog dial replacement and they sent me a brand new boxed Orbit 2 with all the accessories...
If anyone needs anything;
Box + all original packageing,
Cool car charger (stubby with LED)
Car Cradle,
Headphones
Copilot CD's and Serial number, X2
suede case,
1gb Card,
Stylus,
Mains charger,
Usb lead...
Send me an email or PM with an offer and I'll get back to you...
Can paypal me too...
Cheers!
Dan
Click to expand...
Click to collapse
Dan
How much for the headphones, I've stood on the controller part of mine and smashed it............
Cheers
Mark
How much for the headphones, car charger, and car cradle?
Andy
hi,
i have some spares too
spare headphones (unused)
spare headphones controller (unused)
spare car cradle
spare cigarette charger
spare stylus
spare pouch
spare original O2 boxes!
and whatever else comes with the O2 Orbit 2, I stupidly didn't deactivate my CoPilot 7 on first device, doh! But have the original install disks, etc.
anyways, hit me up !
thx
how much would you be looking for for the headphones and headphone controller? Let me know.
Can i buy the pouch please??
Do you still have these items? I could do with the cradle...
Hi there
I'm interested in some of those accesories too if they are still available.
What i need is as follows:
spare headphones (unused)
spare headphones controller (unused)
and possibly the case. I'll be willing to paypal you asap (as long as the price is right)
Hi guys,
May still have some of the spare parts, I gradually gave them away to friends etc with orbits and such that didnt have the parts!
Let me know by PM if you are still interested and I'll dig out what I can.
Biscuitboy
I'd like to know how much a spare set of headphones and a USB cable were going for?
Related
hi everyone
ive just bought myself a XDAIIs pda, ive set up TOMTOM 3 sat nav and have bought a BT TomTom GPS receiver. sat navs working perfectly. but got one BIG problem, i cant find myself a decent car kit. ive tried the Arkon CM531, didnt like it-too many wires and very messy, got carkit with fixed charging through the cig-lighter- did not fit my phone as cradle was for XDAII.
Im really stuck so could anyone please help me. im looking for a car kit which will allow me to slide my xda2s in and out easily, hold it in place and also charge it at the same time whilst its in the cradle.
ANY SUGGESTIONS
Same here ! I could not find anything decent. Any suggestion welcome !
xda2s car cradle
did you find one ?
I GOT THE ANSWER
GOOD CAR CRADLE
TRY
WWW.ARKON.COM
CHEERS
VENKAT
Try www.brodit.com, they produce a few different versions ie. power, power/gps or passive. there not bad looking either!
How do you deal with the Arkon RF/speaker interference?
venkie9910,
sorry for repeting my question, but I did not go an aswer yet:
I read here that it was unacceptable...
http://forum.xda-developers.com/viewtopic.php?t=13654&start=0
how do you deal with it?
Thanks,
Chris
I got the brodit one from handnav with a pro-clip and it fits perfectly and looks good (once you've removed the tacky brodit sticker). Only problem is that the hard-wired version isn't available for the PDA2K yet and the cost! A bundle including the clip, holder and charger set me back £70, but you pay for what you get.
Hard wired one is now available with or without gps ps2 port, I have just ordered one with gps, cost £59.99 plus p+p, the pro clip for fitting to the dash cost £15.99. hopefully it will arrive next week
Hi all, I have this Bordit 849582 for sale: http://w3.easytrade.net/brodit_shop/product.dip?item=1225583&fid=1225727
Just buy yourself a Rikaline GPS mouse . Attach it in your car and slide your Qtek 2020 into the cradle and start navigating!
Interesting? Mail me or just reply!
I think people hurry into buying a bluetooth GPS which leaves them with only a hardwired option for in-car. (some exceptions with multiple bluetooth capability) I prefer the inverse combination. If you're using your nav software you need to see your phone so its going to be in a cradle anyway. If you just pop down the shops you can leave your phone in your pocket and your bluetooth carkit still works.
I'd go for a cradle with GPS built in, or a connector for extrnal GPS. Preferably powered (battery hungry these PDAs!) then BT carkit.
But be careful with carkit choice. Some have the awful echo problem. Can't add much more than that except that an M2000 and Nokia CK-7W is NOT a good combination :-(
There is a decent carkit coming that supports talk function and wired GPS. It is already available for the 2020 and its coming for the 9090. It`s based on a CMPC Carcomm cradle. If everything goes right it should be released next week. I will buy it definatly and will keep everybody posted.
TomTom Car Mount for XDA IIs / MDA III / SPV M-2000 etc tec
try this - can be hard wired or use ciggy lighter connection....
http://www.pdamods.com/proddetail.asp?prod=A11XDA2SMNT&cat=23
regards
Alan
Cheap and Effective Magnetic Mount
Hi,
how about trying a magnetic mount?
http://www.tangshop.com/magnetic-cell-phone-holder.html
Cheap, effective and neat (inconspicuous), but you have to stick the metallic mounting plate onto the back of your PDA (somewhere in the middle, preferably on the battery). Fortunately, the sticky pads are from 3M so they are strong and the residue can be removed with normal dabbing of scotch tape. The metal plate is thin so it does not affect the fitting to existing casings.
The part that sticks to the dash is using the same adhesive too.
I've tried this with a Bluetooth GPS and the XDA IIs on the dash, and the magnet is strong enough to hold the PDA in place even through fast corners and bumps ...
Cheers,
David
Another option is from this company:
http://www.thb.de
However I couldn't find a picture of the cradle.
I have however seen the cradle in the flesh and is it very very nice... even has DSP processing for the handsfree.
It is very pricey though.
Forgot to also add this link.... has a few pictures
http://www.ptp.net.au/s8_cradles_XDA_Imate.html
I do not know if they have one for the tom tom as I do not know what a tom tom is, but ProClipUSA.com has some great PDA holders for the iMate PDA 2K
Raptor
i have an xda for sale the screen is ok but used, the only problem is the mother board where it connects to the screen it is damaged, i also have the docking station and a car adaptor the case has dents as it has been my work phone for 2 years. now upgraded. £40 will get it all including postage in uk.
neil
Hi
I would like to know what memory resides in that xda?
And if is possible you to sell it to portugal????
Thanks in advance 8)
its an early model (wallaby) been used it has scratches on the case, but served me well untill i played with it after buying my new one, hense the damade to the connection on the mother board to the screen.
i hope this helps. yes will send i want £20 plus postage. it also has origional cradle, head phones and car charger.
I want to buy your xda
If you are interested, contact me!.
Anyone found a good car holder for the TyTN? I've looked through ebay and found a few and all of them have no charging/power connector. I don't know which one fits well. I'm looking for a good cheap holder with ot without a power connector. Any recommendations?
Try the Brodit range:
http://www.dsldevelopments.com
There's also a thread over at Modaco.com about their stuff:
http://www.modaco.com/index.php?showtopic=244140
Hope this helps.
That looks really good! But I can't afford to spend £40 on a holder. I went for a simple one from ebay for a fiver. I only use it when I go on long trips and use my tytn for satnav which is very seldom.
penyekz said:
That looks really good! But I can't afford to spend £40 on a holder. I went for a simple one from ebay for a fiver. I only use it when I go on long trips and use my tytn for satnav which is very seldom.
Click to expand...
Click to collapse
You could check out these links, they are from HTC Europe.
http://www.expansys.com/htc/p_htc_item.aspx?i=142066
http://www.expansys.com/htc/p_htc_i...www.expansys.com/htc/p_htc_item.aspx?i=142058
http://www.expansys.com/htc/p_htc_item.aspx?i=142059
Things to consider though is if on long journey the phone might need charging so make sure the mini usb has enough room for a car charger to be plugged in. I use the charger for Holux GPSlim 236 satnav receiver to charge both devices when in the car. The only other problem I had with my M2000 was when accelerating hard or going fast round corners the phone would be pulled out of the cradle in fact I tried loads of cradles so I'm hoping this smaller phone doesnt suffer the same problem otherwise it could be elastic band time again.
Looking at that cradle in the top link it looks like one of the bottom lugs will block access to the mini usb which is no good really. Oh well only one way to find out and thats go and buy it.
I bought one from a Vodafone shop. It's just known as a universal car holder. Cost a fiver and works great.
I can still access the mini usb and all buttons while it's fitted in there.
Hope this helps
Is it worth buying something which is designed specifically for the Hermes or does a cheap generic one do just as good a job?
I'm willing to spend a bit extra is the holder is better quality.
If anyone has a decent holder could you let me know the brand/where you got it from.
In my experience, The Brodit holders are superior. They have excellent fit, and some come with built-in charging (active holders) for additional convenience.
yes, anything by Brodit - expensive but worth it.
I am not very much convinced with their website's photos.
I have ordered dwo desktop cradles from expansys: HTC-branded, and from ORA, plus a car holder by Carcomm. I will review and post photos when they (finally) arrive.
Another vote for Brodit. See my pics in this thread:
http://forum.xda-developers.com/showthread.php?t=280439
I can recommend a unit by Carcomm, available at Handnav.
http://www.handnav.co.uk/product_details.php?id=2292
I've been using it for 3 weeks, very pleased with. You can get power cables for various GPS receivers too.
HTH
Mike
i am using a cheap car holder from Hama. it's doing its job and i paid only 20euro for it
My vote goes to the Brodit holder. Use it for several months now and charge my tytn without problems. Also i have one for my dell axim pda.
Brodit holders are a perfect fit.
i just use a generic pda holder bought form ebay, i think the ebay store was t-dimension.
it cost me $5 AU + postage. It is an anti-vibrate model.
This holder together with a TYTN car charger ($20 AU) is a practical and cheap (money wise) solution.
There is ONLY one place to buy from and it is...
www.proclipusa.com
I have no affiliation with them but I have bought holders for 2 different vehicles from them. The quality is very high. And they have basically taken every single vehicle out there and figured out how to mount your ohone as if it were a factory option. The location of the brackets is different for all vehicles and the fit on the phone and on the car is perfect.
I hope you enjoy, just as I have.
Using the Brodit cradle here, fantastic bit of kit which works perfectly. Recently used it on a 2500KM car journey and it was perfect the whole way!
Does anybody know which holder is compatible with the extended batteries?
I got this one at radio shack for 16.00
http://www.radioshack.com/product/index.jsp?productId=2103140&cp
add to it a retractable miniusb cigarette charger (for the RAZR) at wal-mart for $10.00
That looks right along the lines of what I want - I don't think it would hold the LION Battery pack with the Hermes though :/
First let me make it clear...
This is strictly a recomendation for fellow Note owners.
I do not have anything to do with sales or anything near..
Wanted to share good stuff for as I really truly find these to be awesome.!
I just received (2) of these from AMAZON. Only $15 bux a pop. Ya Cant Beat It!
http://www.amazon.com/gp/product/B006L9K16W/ref=oh_o00_s00_i00_details
Dual USB / AC Plug Desktoop Charger.
Charges via AC while SYNCS USB (leave single or both jacks plugged in)
Bothwork together. Comes w/AC Adapter. Cradle has built in USB cable (so cant lose it!)
Very tiny footprint. Fairly Sturdy. Phone does not tip over.
I actually place one in the ashtray dashboard of my car (wired USB)
Easy feel ... for locking phone on and off of cradle (thats important!!! )
They are the most ALTERNATIVE affordable pricing compared to the OEM desktop chargers which in my opinion are not that good and are about $50 bux or so.
Support Car / Home docking software when phone docked.
Only Con is...BRIGHHHHHTTT blue LED light. Extremely bright.
Had to place a piece of black tape over LED
Thought I would share the 411.
Its hard to find a good alternative these days.....
Thanks for sharing this, just ordered two alongside the OEM Sammy car mount.
Thanks for sharing! Just ordered mine.
How quick does it charge?
Thanks for the tip. Just ordered one that I want to use to make a custom dock that I can fit in my cup holder in my car, as this phone is too big for my cup holders and that's where I like to keep my phone when driving. Was looking for a good/cheap dock, so thanks again for reporting back on the quality of this one. Definitely a nice price. Free shipping with amazon prime too.
how snug fit it is on the back? is there any room for the case? Will it fit if I have a thin case on?
I see that they also have the one with spare battery charger for $2 more. Interesting.
Hmmm you could probably MHL output while also USB host moding a keyboard/ mouse with this. Gonna buy one to give it a shot
Does it fit when i have a TPU case?
Actually the Samsung OEM dock is great. It's $40 at the ATT store. But I paid $20 with my premiere account.
I bought another on ebay as a back up, but haven't received it yet from here:
http://www.ebay.com/itm/220923137856?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_3363wt_1270
This does not actually come with the charger does it? \ Igt says can be used with charger that came with note.
Im confused. \/
so sorry for the delayed response! yes this desktop charger comes with one ac adapter in addition to a usb cable that is a cable built into the charger itself.
it allows you to keep the phone plugged into to both pc & ac wall at the same time with out the need to switch cables
it has a overload protection so no fear of charging burnouts.
it is definetely a snug tight fit onto the cradle itself. never worries about falling over or lose connections. i can say it works super super tight . real happy w/purchase.
Sent from my SAMSUNG-SGH-I717 using da premium