Hello all,
Does anybody have experience with the krusell case “S” or “S-Wide” for touch cruise / Polaris?
As it’s states in the device specification size is : 110 mm (L) X 58 mm (W) X 15.5 mm (T)
and in the case specification it's stated that it fits, but according to case size it's not possible.
Horizon with Multidapt® - S (http://www.krusell.se/productUni.php?productID=2410&category=49)
Internal dimensions mm/inches: 113 x 46 x 22 / 4.45 x 1.81 x 0.87
Horizon with Multidapt® - S-Wide (http://www.krusell.se/productUni.php?productID=2419&category=49)
Internal dimensions mm/inches: 113 x 51 x 23 / 4.45 x 2.0 x 0.91
anybody tried any of those cases? thx for short feedback
Krusell dedicate case
Hi
I bought a dedicated Krusell Case 2 weeks ago,
http://www.krusell.se/product.php?productID=2861&category=51
So far - a very good case - u can sync/charge - and use the Cameras with the device in the case.
I bought it in MobileCityOnline on my last trip to the US ,
they have an online store :
http://www.MobileCityOnline.com
Yosi
Hello,
I have the same krusell for my O2 xda orbit 2 ... and I must say I´m a bit disappointed!
The openingsat the front doesn´t fit! The frontcamera is half overlapped by the leather and the earspeaker (sorry don´t know the correct english word) is totally under the leather ...
nice try, but I will go and look for another bag in the future ...
greetings
Proporta alu-leather
I used Proporta Alu-leather case for my P3650. May not be the most sexy or slim case...but it works and gives one of the best protection for my phone
cyberion said:
The openingsat the front doesn´t fit! The frontcamera is half overlapped by the leather and the earspeaker (sorry don´t know the correct english word) is totally under the leather ...
Click to expand...
Click to collapse
Of course it does not fit, it is for the HTC Cruise, they have a different housing.
I own a Krusell for my Cruise and it fits perfect. Only the leather was cheap, but after a lot of leather cream it goes well.
I've got a Krusell Orbit as well
http://www.krusell.se/product.php?pr...61&category=51
I'm not really happy with it as it makes the phone to big and the clip is really hard to open (needs long fingernails). A magnetic clip would've been much better.
Also, I have to take out to put in cradle anyway, so the only time I use it now is to attach to my Krusell Bike Holder (Multidapt). Even for that it's not great as I have to hold the flap back.
Nice enough case, but not really what I was looking for.
m3it said:
the clip is really hard to open (needs long fingernails). A magnetic clip would've been much better.
Click to expand...
Click to collapse
I don't have problems for opening, but for closing it is very fiddly. (is this the right word? fummelig in German)
Borizli said:
I don't have problems for opening, but for closing it is very fiddly. (is this the right word? fummelig in German)
Click to expand...
Click to collapse
Yep, I should have mentioned that. Opening could be easier, closing is certainly VERY fiddly (yes that is a good word for it)
nazdar Martin, ja som akurat dostal krusell orbit pre touch cruise(mam orbit 2 - trochu iny design) a pasuje v ramci noriem, sice prvy krat ho tam dostat bol porod(prilis tesne, ale je to koza ta sa rozchodi). Odporucam.
-----------------------
I just rcvd krusell Orbit case for HTC Touch Cruise(although i hv o2 orbit2 - little bit diff. design) and it fits (more less - design thing of o2 o2). 1st attempt to wear the case was a labour(too tight, but its leather so U dont need 2 worry - leather can expand a bit) Recomended(i hv krusell windshield holder i use for Universal, Artemis, and polaris)
krusell case for htc touch cruise / polaris
thanks to everybody ....
the krusell orbit is not the case what I'm looking for. I would be more interested in the Horizon model. So till now didn't found anybody who tried it
I keep searching for the "perfect" case
Related
Hi ive just moved from the TREO600 to an O2 xda mini s and i hate the belt clip case that comes with it , anyone know of a simple slip case (like the treo) that works with the xda/kjam/dopod 838/mda vario ive done some googleing but cant find anything
thanks
Matt
www.tuff-as-nuts.com
Good cases, no complaints, configurable too.
Cheerio
Howard
Nice one they look perfect , though the case that fits my device has been suspended
I use a Magician Case, (I-Mate JAM) I used to have the Magician and this case was very good for it, the mini-s fits snuggly in it now and it has stretched a little over the course of the year I've had it.
Cheerio
Howard
ok here are some suggestions while you look for your perfect slip case... by the way are you looking for a horizontal one or vertical one?
--
ipod mini sock [it stretches... used this the first few days I had my wizard]
one of those oakley shades cases cum wipes [dual function there]
--
I think most SE P800 or P900 cases would fit the mini S [well actually from comparison shots it even looks like Treo cases would fit as well]
--
currently I am using a aluminium case for my wizard.
Hi ive tried the treo and an ipod case they are both a quite tight, i could attempt a stretch but id prefer a solution that doesnt need modding Oh and im looking for a verticle slipcase just like the Treo's no belt loop etc justa simple case.
Krusell
The Krusell Cabriolet ought to be perfect from what you're describing. It does come with a belt clip functionality but since it's Krusell you can replace this with any one of a number of options or simply remove it altogether.
There's a post over at PDANut listing all the case options.
i know its a little late, but im looking for a slip case as well and came up with this
Slip case
Timbuk2 Smartphone case. Fit perfectly
http://www.timbuk2.com/tb2/retail/catalog.htm?categoryId=47
I got mine from Palm store
http://web.palm.com/products/Category.jhtml?id=180042&cat=b100016
Go to boxwave.com and make a request. They claim that if they get enough requests they release the product. Go to the link at the bottom to request a product for a device and then make sure "Flexiskin" is checked. It is probably a good idea to mention all the Wizard's aliases (MDA Vario, Qtek 9100, I-mate K-jam) so they see it is a device in alot of user's hands. I owned one of these for my Treo and it was outstanding.
Just an FYI to everyone:
I got my Krusell Verticalic Case today and it works GREAT for the 8125. You need to order the small-wide size (Model 94178). The websites don't list it as compatible, but if you pull out your ruler and measure your phone (believe it or not Cingular has the width wrong) you will see that it is a perfect fit for this case. I have a spring clip to wear with my jeans and a swivel clip to wear with my nicer work clothes.
I am psyched! I had been waiting for this thing to come in, as I was convinced it would fit despite it not being listed as compatible.
Also-if anyone is looking for a good place to get one of these...I can recommend sfplanet.com. I ordered mine from them on Sunday and I got it today (MN to SC). They also did a great job with some special instructions I left in the comments box.
Two thumbs up for the Krusell case and two thumbs up for SFPlanet.com!!!
http://www.krusell.se/productUni.ph...=616&category=4
http://www.sfplanet.com/index.cfm/f...atid/0/id/59211
SuperDodge said:
Just an FYI to everyone:
I got my Krusell Verticalic Case today and it works GREAT for the 8125. You need to order the small-wide size (Model 94178). The websites don't list it as compatible, but if you pull out your ruler and measure your phone (believe it or not Cingular has the width wrong) you will see that it is a perfect fit for this case. I have a spring clip to wear with my jeans and a swivel clip to wear with my nicer work clothes.
I am psyched! I had been waiting for this thing to come in, as I was convinced it would fit despite it not being listed as compatible.
Also-if anyone is looking for a good place to get one of these...I can recommend sfplanet.com. I ordered mine from them on Sunday and I got it today (MN to SC). They also did a great job with some special instructions I left in the comments box.
Two thumbs up for the Krusell case and two thumbs up for SFPlanet.com!!!
http://www.krusell.se/productUni.ph...=616&category=4
http://www.sfplanet.com/index.cfm/f...atid/0/id/59211
Click to expand...
Click to collapse
Your links are broken.
Any good cases out there?
teride said:
Any good cases out there?
Click to expand...
Click to collapse
PDAir are now offering a flip-type black leather case ... 1st I've found.
Probably not the highest of looks - I prefer Covertec myself - but cheap enough (USD$28) and will have to do until the real thing comes along (I always wanted to say that )
I just got my o2 o2(o2 orbit2) yesterday, it fits krusell Orbit Case for HTC3300 perfectly - except the hole on the back doesnt fit camera :-( but anyway i didnt buy it to use it as regular camera. So far i'm happy.
Anyone already found some cases like the one supplied? I'm looking voor a leather one the only one I found is this one http://www.beyzacases.com/cat_vs9.cfm
Boxwave are also selling cases (and other stuff): http://www.boxwave.com/products/dlcase/htc-touch-cruise-designio-leather-case_3046.htm
The credit for finding this goes to Dave Fields who first posted a thread here about Boxwave accessories for the Touch Cruise.
- Julian
Some more cases here. Never bought from this shop.
http://search.stores.ebay.co.uk/neT...fsopZ2QQfsubZ13956052QQsaselZ44385645QQsofpZ0
teride said:
Any good cases out there?
Click to expand...
Click to collapse
I immediately found the belt clip case for the Samsung Blackjack. It is a great fit and a well protected case.
Hi,
I have an Orbit 2 and goy the Pdair flip case last week.
very good and came the next day after ordering
Only issue is the lights on the front are hidden by the case, but for me thats minor.
All other holes for buttons, 2 x camera etc are ok.
Would buy another.
Cost £15 with delivery
The case for the Moto-Q actually works quite well. I got the one that's made by Motorola.
Leather Case for HTC Touch Cruise/HTC
HI guys, I wish buy this leather case. somebody have bought this leather case "pdair" for our Htc Cruise, what do you think? Has another plastic film protector Stitched in the skin?
what do you think?
http://www.pdair.com/catalog/product_info.php?products_id=7159
Leather Case for HTC Touch Cruise/HTC P3650/O2 XDA Orbit II/HTC Polaris 100/Dopod P860 - Flip Type (Black)
US $28.00
Krusell cases
I've been un touch with Krusell , They don't have a case for the HTC Polaris ,
but they promise that "Soon" they will release products for the HTC Polaris,
they promise to let me know....
so I will keep u poseted.
I tried it in the Artemis aluminium case from Pdair and it fits but is a little tight to close the front once inside, camera hole is wrong but otherwise this is the style of case I want, its saved my Arte from many a fall, the case looks battered but the device is still as new - Mike
I have this case, and am impressed with it.
http://www.boxwave.com/products/dlsleeve/htc-touch-cruise-designio-leather-sleeve_3046.htm
butzchan said:
I have this case, and am impressed with it.
http://www.boxwave.com/products/dlsleeve/htc-touch-cruise-designio-leather-sleeve_3046.htm
Click to expand...
Click to collapse
I wanted one, but $30 shipping to Europe is steep for normal mode of shipping
victoradjei said:
I wanted one, but $30 shipping to Europe is steep for normal mode of shipping
Click to expand...
Click to collapse
If you select International and Standard shipping the cost is $9,50.
There is silicone case for polaris ?
I've been very happy with the Bugatti cases I bought for both my XDA Mini S and original Orbit...
http://www.bugatti-mobilecases.de/html/index.php?lang=EN
Bugatti don't offer a case for the Orbit 2/Polaris yet, so I mailed them to ask when it will be available.
Their marketing department told me that it's not available in Germany yet, doh! So I sent them a link to the German O2 site, I await their response with anticipation...
Update: "The XDA Orbit 2 is available in combination with a long-term contract. The device without a contract is extremely expensive. The estimated amount of sold cases does not justify the expense at the moment. Hopefully we will have other possibilities to receive an original device. Please sign up for the newsletter. This seems to be the best to do at the moment."
!!???!!!
Piel Frama
I've been very happy with my previous Piel Frama case for HTC Touch
and I'm a bit quite disappointed by my Boxwave case (except a very good price for a general good quality)
However, in order to get the top of the top leather case for my new Polaris, I will order the new one at Piel Frama
For sure prices are high, especially in US$, but the appointment with quality is set !
There are lots of different thoughts and opinions. But i have never used any cases before. So any suggestions to me is welcome..
bluebee said:
There are lots of different thoughts and opinions. But i have never used any cases before. So any suggestions to me is welcome..
Click to expand...
Click to collapse
http://www.4winmobile.com/forums/4wm-news/14448-new-piel-frama-leather-case-htc-touch-cruise.html
One of the first accessories I like to buy for any new device I get is a replacement (fits in OEM silo) Pen stylus. I know the Touch Cruise is new, but has anyone seen any stylii that are pens and fit in the device?
TIA!
Hi - the TC comes with a spare or Expansys(UK) are selling some here:
http://www.expansys.com/a.aspx?i=159608&atype=Stylii
Though showing estimate delivery of 9 days from today...
Thanks for the reply. However, I am looking for a combination pen-stylus that fits into the existing silo slot of the Cruise. The link you provided was for stock replacement stylus which is not a pen.
Oops. Sorry. Will post again if I find what you need.
doubt you will find one, the size of the stylus on the touch cruise would surely be too small to fit a combination pen/stylus
chris2403 said:
doubt you will find one, the size of the stylus on the touch cruise would surely be too small to fit a combination pen/stylus
Click to expand...
Click to collapse
Is such a stylus available for the Artemis? If so then it would NOT fit the Touch Cruise because the bit of black plastic at the end is a different shape but it would demonstrate that such a thing is possible because the overall dimensions of the two styli are identical. (I just slid my Artemis stylus into my Touch cruise and the diameter fits perfectly, the overall lengths are identical, and the only reason the Artemis stylus won't push fully into the TC is because the plastic bit at the end is longer relative to the overall stylus length compared to the TC stylus so it fouls the edge just at the last 5mm or so of travel into the device.)
- Julian
haven't got mine at the moment but how thick is the stylus? 2mm, cant see how a mechanism for a 3 in 1 would fit in such a size
chris2403 said:
haven't got mine at the moment but how thick is the stylus? 2mm, cant see how a mechanism for a 3 in 1 would fit in such a size
Click to expand...
Click to collapse
Definitely bigger than 2mm. I just held it up against a tape measure and the diameter looks to be just a shade over 3mm, probably about 3.2mm.
- Julian
still think its not thick enough even at 4 mm, have you ever seen anything like this that is less than 1cm+
chris2403 said:
still think its not thick enough even at 4 mm, have you ever seen anything like this that is less than 1cm+
Click to expand...
Click to collapse
I have gotten (in the past) a 3-in-1 for every device I have had except for the collapsible KJAM stylus. One will become available for the Polaris. The stylus is not that much different from other devices.
Re my previous message, this will almost certainly NOT fully push home into the receiver on a TC (because of the different profile of the black plastic thing on the end) but it IS an existence proof that such a device is possible within the form factor of a TC stylus.
Artemis 3-in-1 stylus: http://www.proporta.com/F02/PPF02P05.php?t_id=3095&t_mode=des
- Julian
http://www.easydevices.co.uk/pp/HTC..._Cruise/HTC_TOUCH_CRUISE_STYLUS_-_3_PACK.html
Would that fit the Orbit 2 aswell
chris2403 said:
http://www.easydevices.co.uk/pp/HTC..._Cruise/HTC_TOUCH_CRUISE_STYLUS_-_3_PACK.html
Click to expand...
Click to collapse
That's what we need. I am sure some US distributors will pick this up soon. HTC just needs to get the damn device out there in more quantities.
They will deliver to the us but it wont be cheap, probably about $60
chris2403 said:
They will deliver to the us but it wont be cheap, probably about $60
Click to expand...
Click to collapse
Ouch. I love my pen-stylus combo's but not for 60 bucks. I'll wait 'til a US distributor comes along.
If i see anything ill let you know, am i right in thinking that the Polaris stylus is the same as the orbit 2 stylus
that looks sweet...can't wait for it to be avail. in the US!
i'm sure by this summer when the TC starts to become more popular over here we will start seeing alot cooler accessories for it.
It's just a matter of time...the waiting game def. sucks tho
chris2403 said:
If i see anything ill let you know, am i right in thinking that the Polaris stylus is the same as the orbit 2 stylus
Click to expand...
Click to collapse
If an Orbit 2 stylus is the same as an Orbit 1 then no, the Polaris stylus will not push home fully into the Orbit housing. Read my previous posts in this thread (including the one on page 1 of the thread) for details. If Orbit 2 stylus is different to Orbit 1 then I don't know.
- Julian
Wow I love that!
i was look for a good case with belt clip
so i bought the official htc case for P6500 on Htc/expansys site
and .. send it back
because it is nothing like it is on the picture
it is not a a belt clip case, it is some kind of "wallet case"
so i search and search....
the only cases that seems to feet is all the universal cases
but no one seems goog enouth
and seem to be imposible to find some horizontal belt clip case
so here is my find
http://www.noreve.com/category/PC+d...tui_cuir_universel_PDA_-_Large_Tradition.html
good quality
just a little large for the p6500, but good
i would like some case that feet the P6500 well , horizontal with belt clip
so until it comes out, this one will make the the job
so if some of you find something better, don't forget to share !
regard
Years ago compaq used to make an expandable fabric case for the 36xx ipaq. I still have mine and it fits the p6500 perfectly. I don't know if it's still possible to acquire it.
Ultimate Sedna Case
I purchased one of these babies a month ago for my new Sedna and LOVE IT!!!!!
http://www.pielframa.net/htc_p6500.asp
Picture shows a brown color case, but it's available in black
Made in Spain
Can't speak highly enough of the quality
Highly recommend
kwburress said:
I purchased one of these babies a month ago for my new Sedna and LOVE IT!!!!!
http://www.pielframa.net/htc_p6500.asp
Picture shows a brown color case, but it's available in black
Made in Spain
Can't speak highly enough of the quality
Highly recommend
Click to expand...
Click to collapse
The P6500 has a bit rounded backsight, so if u tap on the display the HTC waggles. Is this problem solved with the PielFrama?
axle7517 said:
i was look for a good case with belt clip
so i bought the official htc case for P6500 on Htc/expansys site
and .. send it back
Click to expand...
Click to collapse
So did I ... also bought/sent back numerous other cases that were either too big or just plain garbage
axle7517 said:
i would like some case that feet the P6500 well , horizontal with belt clip
so until it comes out, this one will make the the job
Click to expand...
Click to collapse
I finally found & bought one of these from PDAir
They do two or three of them but this one was what I was after, just something to carry it around & clip on me belt
I have one of the ones that kwburress wrote about and found it to be an excellent piece of workmanship, but, I also found that PDAir have some aluminium cases which are handy as well. Thanks to both Prospro and kwburress for their input...
http://www.otterbox.com/htc-cases/htc-p6500-cases/htc-p6500-defender-case/
we use the otterbox, it's great if you need a rugged case for ultimate protection.
Have anyone ordered the ikonic edge SuperSlim case for the THD??, it's originaly desgined for the iphone 3G, but as it's 100% genuine leather it can be stretched a little bit to fit the THD.
Moreover, I've contacted them to ask if it fits the THD. And here is the reply:
-----------Quote
Yes the dimensions are almost identical.
In fact I have had a few customers who has bought one
for the HTC. There is no reason why it shouldn't
be a very good fit. I don't have the inner dimensions
but going by the size it will fit the HTC.
iphone 3G Dimensions:
(115.5 by 62.1 by 12.3 mm)
# Weight: 4.7 ounces (133 grams)
HTC Touch HD Specs:
* Dimensions: 115 mm x 63 mm x 12 mm
* Weight: 146 gms
Regards
Dominic
______________________________
Tel (64) (09) 4808386
Mobile (64) 021 50 8686
www.iconic.co.nz
New Zealand's Online Design Shop
-----------UnQuote
But, still am not sure if it will perfectly fit and didn't decide to order one yet!
The leather and design is nice. wondering anyone use to before i get one.
Very nice, makes me proud to be a Kiwi. Was going to order one and in NZ$ and get it sent but works out I would only save a few £ due to the terrible sterling rate
provide information about the fitting of the phone once you get hold of this leather pouch. the temtation of this case is raising from me.
Anyone bought this case yet? please advise if the fitting is not too tight for HD.
Well, since no one reponded yet here is a reply I got from Ikonic Edge regarding this matter:
Hi
We have sold a number of these to HTC
Touch owners as the dimensions are almost
the same. So it fits just as well with the HTC.
Regards
Dominic
______________________________
Tel: (64) (09) 4808386
Fax: (64) (09) 4181142
www.ikonicedge.com
New Zealand Handmade Leather Pouches
Click to expand...
Click to collapse
I am planning on ordering one when I get my HD
Browsing through the site, these cases seem very good quality. One question that occurs to me though; if they're made for the fruitphone, the 'speaker opening' that they tout in their description won't be in the correct place for our HDs.
I have ordered an ikonic edge Super-Slim Card pouch (iPhone 3G) tan colour for my Blackstone.
I will post some pics and short review as soon as I receive it
Hi, any pics yet?
No not yet, didn't receive it yet, hopefully tomorrow!
I'll let u know
you may not hear any ringtone at all
the speaker of HD is on the back not like iphone on the side
soundonly said:
you may not hear any ringtone at all
the speaker of HD is on the back not like iphone on the side
Click to expand...
Click to collapse
Well, do the Blackstone designated cases/pouches have an opening on the back
soundonly said:
you may not hear any ringtone at all
the speaker of HD is on the back not like iphone on the side
Click to expand...
Click to collapse
There's nothing to worry about as far as the ringing tone goes. I have several different leather pouches designed for Iphone that work perfectly with HD. And since Touch HD actually has the loudest speakerphone out of the whole touch-screen bunch, I can confirm that keeping it inside leather pouch does not affect ringing volume.
I actually noticed that the default HTC soft pouch muffles the sound more then the leather ones.
As for the dimensions, most Iphone accessories will fit Touch HD as well. Only possible problem is that HD is slightly fatter at the bottom, so some stretching may be necessary.
No pics yet???
yeah any updates on this case? interested in getting one but wanted to know from someone who already has one.
It is here....
Ok guys, I got the pouch a couple of days ago
It is just awesome
I'll be posting a review with pics later this evening... stay tuned
The review is up...
Check out the review with pics for this pouch here:
http://forum.xda-developers.com/showthread.php?p=4034898#post4034898