Related
Ive finally decided to ask you guys here as im sick and tired of searching...
Basically i cannot recieve any bluetooth like business cards, tunes, videos, files etc etc although i can send them???
i can also use bluetooth headset mode and this is fine....
ive tried blutooth tools without any help and also contacted orange who DO NOT cover bluetooth...
Basically i would like to be able to receive via blutooth files...
should my phone be able to recieve these kind of files? as orange say NO it shouldnt be able to receive or send bluetooth files its only configured for the likes of headsets?
Please be patient with me im not very good at all this malarky. If you require more info please say.
I have already upgraded the rom from the orange site.(i think)
Op Version:- 3.66.1.230
ROM:- 1.6600WWE
Radio:- 1.10.00
would running the new wm2005 cure my problems or just cause me more headaches?
if it's not supported by the think ms bluetooth stack you can try to install the vidcomm bluetooth stack but of cause that dont support headsets
How stupid do i feel :lol: :lol: :lol:
for the past 9 months ive been having trouble only having bt 1 way. ive on many occasions hard resetted and noted it works fine until ive re-load all my apps and set up my pda how i used to run it...
Ive just realised although i select BT to discoverable i pressumed the "Beam" was infra red only and not receive bt beams i turned it off as i thought if i didnt IR would always be live and hence my low battery life..... turns out its bt too
Its laughable as ive been pissed for the past 9 months trying to figure it out.
So much for Orange saying it shouldnt be able to send/receive files via bt :twisted: them fookers have had me running round the net searching for aftermarket bt tools for months.
thanks Sn00p, i was having problems recieving a file via bluetooth the other day and had the beam turned off as i to thought it was for IR only. i'll see if this works now as i'm using wm2005. looking at the icon in connection though it is in red and blue which i suppose might suggest IR and bluetooth.
So much for Orange saying it shouldnt be able to send/receive files via bt
Click to expand...
Click to collapse
many support people only know what the manual for the product says
1. A2DP icon missing
I want to re-direct skype audio to my bluetooth earphone. How can I do that?
2. I can not login MSN/windows alive though skype can login without any problem via WIFI. Seems MSN try to get online through different connection setting? how/where can I define the connection setting for MSN?
3. Phone module die without any sign. All incoming call is diverted to voice mail automatically until soft reset. As if the phone is switched off.
(I am not sure whether this is WM6 related)
this means you might miss important call without any sign!
Does anybody have same experience?
1) I dont think that was ever a default thing? Did you install something and forget? have a cooked rom? There are A2DP solutions in this forum, "Use the Search luke."
2) No, its shagged. I installed the windowslive50.cab file I had on universal, it works now.
3) No idea, mine works fine. Hard reset? Check your sim?
I can get online with my WLM but it does sometimes take a resync of the whole account to do it.
Skype did say (unless changed recently) that they were still working on transferring calls to bt headsets. Which means, currently, that it does not work through anything other than headphones and the mic on the phone.
Comm Manager
Hello,
It is possible to change the green color from the Comm Manager ?
Thanks
French Keyboard
I have upgraded my french Advantage and all is OK apart for keyboard layout. On my old Universal (also french keyboard) I had changes the registry for hklm/software/oem/qwerty layout to 1040C (hex) and it had worked.
On the advantage this does not seem to change anything, any ideas?
Also has anyone got integrated VoIP working? I have used a CAB file from Universal to activate it and SIP Config Tool to do the set up but it does not allow me to select VoIP from today menu.
Anyone got this set up and working? Integrated VoIP is the reason I upgraded to WM6!
Messenger Etc....
Live Messenger stops working correctly after a soft reset. Initially it works fine. Contacts show as offline, although they are still able to contact me and vice-versa.
As far as I can ascertain push email still functions correctly.
I cannot confirm whether this is related to MS's side (rather than the program) as I haven't had chance to check if anyone else experiences the same problems.
Have tried installing the separate CAB file but I am subsequently told that I do not have the necessary permissions (or something like that).
This comes from tests on a T-Mobile branded Ameo (not the brand new one I'm selling, if anyone decides to cross-check!)
I haven't come across any other problems. Seems a bit less laggy than the original T-Mobile ROM, loads up web pages slightly faster too it seems.
No other issues as yet.
Ive had no probs at all since installing the messenger cab.
Still using it now.
Do we know what version of WLM is on this new ROM?
I've pulled \windows\wlmmessenger.exe to desktop and looked at the Version tab...10.6.28.2700 is what comes out.
Pyrofer - can you do the same on your cabbed version and let me know what the version number says? Not always an accurate guide but worth a shot. Also the digital signature is 3rd May 07.
Cheers
Ant
EDIT - never mind, just seen ur post in general Athena tab...10.6.0026.1400
I wonder what is different? If anything? I also wonder whether this is actually a final release of the ROM that's just been leaked early, as WLM is a pretty central component to web using Athena owners (myself very much included) and for it not to work after a soft reset...hmm.
Hi royalmail,
I've got exactly the same problem you mention about the phone.
I was unable to answer calls.
So I belive you've use the second file to upgrade to WM6 (HTC001 ... with ipl...).
You have to go back to WM5 WWE using the last ROM posted in the Athena upload folder in the XDA FTP. After flashing your Athena to WM5, Use the first ROM posted (the one with a readme file included).
And voila! No problem at all since I've done it this morning, everything works fine!
Hope this helps!
Hi Thibale,
I flashed with the t-mobile version. the phone dead only once so far, though i am not sure it's caused by WM6. Anyway, thx for sharing your info.
royalmail said:
1. A2DP icon missing
I want to re-direct skype audio to my bluetooth earphone. How can I do that?
2. I can not login MSN/windows alive though skype can login without any problem via WIFI. Seems MSN try to get online through different connection setting? how/where can I define the connection setting for MSN?
3. Phone module die without any sign. All incoming call is diverted to voice mail automatically until soft reset. As if the phone is switched off.
(I am not sure whether this is WM6 related)
this means you might miss important call without any sign!
Does anybody have same experience?
Click to expand...
Click to collapse
See if this helps
http://www.silentservices.de/btIO.html
Also, read through the forum regarding some of your other issues.
Try to disable your GPRS and see if your calls start coming through.
Pyrofer said:
Ive had no probs at all since installing the messenger cab.
Still using it now.
Click to expand...
Click to collapse
Thanks for all the input.
@Pyrofer, could u upload yr WLM5.cab here? thanks in advance.
Hello,
I setup my voip on the PK3.0 rom, its dialing and it almost works. Except that I can not hear anything, I can speak and the other party hears me just fine, but I can not hear them, anyone came across this? What can you recommend to fix this?
bump, still no resolution to this, it works fine one way. But I can't hear anything the other person is talking....
Anyone?
marek101 said:
Hello,
I can speak and the other party hears me just fine, but I can not hear them
Click to expand...
Click to collapse
This isn't going to help much but .... sounds like the perfect setup to me.
Hi Guys,
I am trying to run VoIP on my device (which is not athena by the way) and have absolutely the same issue. I have very good knowledge in the voip networks and very good experience and this thing makes me crazy (believe me)
As what i already found is there shouldn`t be any issue:
the RTP is going between the end points without any troubles on the correct ports and everything looks just perfect - i.e. there is no any network issue, SIP communication (SDP related) issue or whatever like that
The possible problems for me are as follow:
- codecs issue - actually if you can make a call and the other side pick it up without the line to be dropped, then this is not the case (at least the codec on windows mobile is working)
- the audio output device - the audio is trying to go out trough a device which is not present on your system - so you are not hearing anything.
I will be glad to chat to anyone who have the same issue and can help me to debug the problem and find the permanent solution. I don`t have big knowledge on windows mobile devices (but at least know how to install cab files and modify the registry settings - hehe) so to anyone who is in deep relationships to this system and can help me -- give me your msn/icq/skype/jabber contact and lets pray together
salasbg said:
Hi Guys,
I am trying to run VoIP on my device (which is not athena by the way) and have absolutely the same issue. I have very good knowledge in the voip networks and very good experience and this thing makes me crazy (believe me)
As what i already found is there shouldn`t be any issue:
the RTP is going between the end points without any troubles on the correct ports and everything looks just perfect - i.e. there is no any network issue, SIP communication (SDP related) issue or whatever like that
The possible problems for me are as follow:
- codecs issue - actually if you can make a call and the other side pick it up without the line to be dropped, then this is not the case (at least the codec on windows mobile is working)
- the audio output device - the audio is trying to go out trough a device which is not present on your system - so you are not hearing anything.
I will be glad to chat to anyone who have the same issue and can help me to debug the problem and find the permanent solution. I don`t have big knowledge on windows mobile devices (but at least know how to install cab files and modify the registry settings - hehe) so to anyone who is in deep relationships to this system and can help me -- give me your msn/icq/skype/jabber contact and lets pray together
Click to expand...
Click to collapse
I would be very much interested, how would you go about by debugin' this ?
salasbg said:
Hi Guys,
I am trying to run VoIP on my device (which is not athena by the way) and have absolutely the same issue. I have very good knowledge in the voip networks and very good experience and this thing makes me crazy (believe me)
As what i already found is there shouldn`t be any issue:
the RTP is going between the end points without any troubles on the correct ports and everything looks just perfect - i.e. there is no any network issue, SIP communication (SDP related) issue or whatever like that
The possible problems for me are as follow:
- codecs issue - actually if you can make a call and the other side pick it up without the line to be dropped, then this is not the case (at least the codec on windows mobile is working)
- the audio output device - the audio is trying to go out trough a device which is not present on your system - so you are not hearing anything.
I will be glad to chat to anyone who have the same issue and can help me to debug the problem and find the permanent solution. I don`t have big knowledge on windows mobile devices (but at least know how to install cab files and modify the registry settings - hehe) so to anyone who is in deep relationships to this system and can help me -- give me your msn/icq/skype/jabber contact and lets pray together
Click to expand...
Click to collapse
Hi!
I start by stating that I finally got it "working"! Yeahh! This "thing" costed me a hard reset and a lot of frustration. Let me write down what I think is the issue/"solution".
I say "working" because it is almost impossible to get the sound out of the Athena, unless you use a bluetooth headset (I haven't tried the wired one) and the supplied Voice Dialer.
To keep it short, for the Athena X7501 here is what you need to do to have "native" VoiP working partially as thought:
Connect the BT headset
Leave the Voice Dialer activated (Cyberon Dialer, provided in the original ROM). That means that the relevant entry in the registry shouldn't be set to '0': HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\LaunchAPEnable
Connect to your VoiP Servce and launch the phone. Now you should see your VoiP provider as agent. Dial the number (Good luck with the ipdialplan.xml) and you see that the Voice Dialer pops-up! Ignore it. The relevant communication port is happily already taken by the VoiP. You hear the sound on your bluetooth Headset. If you like, you can now transfer the sound to the speaker!
To my understanding, after having spent hours on this issue, I think that this is due to a DLL modified by HTC. Don't ask me which one. There is NO registry entry you can play with to solve it, unless you 're really lucky with the DLLs provided. It seems that there was some kind of agreement to make life very difficult to those trying to communicate through VoiP. I personally use VoiP only at home and don't bother too much. Maybe all this is history in the cooked ROM. Let's see.
If you don't need the Voice Dialer, then I suggest you use Fring. It works well both ways. However to use a Bluetooth Headset, you need to deactivate the Voice Dialer in the registry.
I hope this helps.
Rgds
Dod
P.S. The above are applicable to the original US Rom of X7501
There has been a discussion at Skype with respect to 6.1 and Skype failing to work correctly http://forum.skype.com/index.php?showtopic=112059
Maybe this might be of help.
Strange problem. Maybe you can try with software like fring.
Ran it on pk3 without any trouble and now running it with the 6.1 rom and still working fine
I have been trying to set up a VoIP client on my Windows Mobile phone for a long time, starting with the HTC Wizard which I could never get to work.
I have finally managed to get a VoIP client with a really nice interface working on several phones that I have tried it on.
I am using ViaTalk as my provider but it should work with any VoIP provider.
It works great (with a slight delay, nothing that I can't live with) on an unlocked HTC Sprint Touch Pro 2, a T-Mobile HD2, a HTC Diamond and an HTC Fuze.
The application is by NCH software out of Australia and it is free to use, or if you want to unlock all of the features of the application, download and register the business edition.
Here is the URL for the download:
http://www.nch.com.au/talk/pocket.html
Or if you would like, PM me and I will be happy to send it to you as an attachment to an email.
Only known issue is when the phone goes in to power saver mode it drops the WiFi connection but that should be an easy fix, right now I am simply pressing the power button and it comes right back and the connection is still alive.
wow men! you are amazing! you search better than me xD you have a paid version? or free version?
hecthork said:
wow men! you are amazing! you search better than me xD you have a paid version? or free version?
Click to expand...
Click to collapse
I am using the paid version but the only difference is that it unlocks some additional features that most people proably don't need anyway.
It is not trialware so it has no expiration.
thx you man, i'm trying this app since yesterday; works good!! easy to configurate, i'm using the free version because; i don't have 2 line, i don't use conferente mode... but it will be interesting trying these features xD
How does this app compare to AgePhone?
Hello,
why not to give a try to PortGo !
http://www.portsip.com/softphone.htm
The free version is sufficient and very simple to use, even with several providers (I currently use 2). Skin and language are easy to adapt if necessary (I've made it for French), see also here http://forum.xda-developers.com/showthread.php?t=508715
Dangze
bobzero said:
How does this app compare to AgePhone?
Click to expand...
Click to collapse
I really couldn't tell because I have never tried AgePhone.
I have tried most of the different VoIP clients mentioned throughout this site but I have never been able to get one to work right until I tried this one.
It could be that I am too stupid to configure them right or it could also be that they simply don't work very well, I can't say.
As for PortSIP, I never got it to work right and the developer dropped off line a while back as far as I can remember.
This little VoIP client that I am using has got a clean interphase, it is easy to configure, it does not require any special "helper" apps. so I am happy with it.
Hope that some of you enjoy it too.
I sincerely don't know the use of that softphone over the built-in VoIP for WinMo (WM65VoIP.cab, ultimate.VOIP.WM6.5.cab - available in several threads here) - except you need 2 lines? Especially as these guys do not use the WinMo address book! I don't want to manually add 600 adresses to any additional phone book.
The above mentioned cabs integrate into WinMo and use WiFi or 3G-connections. The phone rings as ususal and displays who called (from WinMo address book). The call is even entered into WinMo callog (only disadvantage: You don't see if a call was made/received via GSm or VoIP). I use them on my TP2 (WinMo 6.1), HD2 (WinMo 6.5.5) and even had a cab file for HTC Artemis (WinMo 5). All works/worked pretty well
So what's the use of these softphones?
Cheers, Franky
ardec1 said:
{R^7Z trim]
Only known issue is when the phone goes in to power saver mode it drops the WiFi connection but that should be an easy fix, right now I am simply pressing the power button and it comes right back and the connection is still alive.
Click to expand...
Click to collapse
I have mine set so that the light always stays on until I turn it off(I turn off auto back-light, my preference). So, no issues there. Additionally, I think there is a setting or app that will allow WiFi to run even while the phone sleeps. Or perhaps it is set into a low-power mode until the power key is pressed?
Howto in France ?
It seems great but how could I make it work in France.
My provider (mobile or at home) is SFR.
Thanks in advance to all for your answers.
Setup file attached to original post
I finally got around to attaching the setup file to my original post so it can now be downloaded directly from this site
Hi,
I suggest to please change the title to "Express Talk for WM".
I already tested it on my Ultimate 8502. I can call but can not receive incoming call. It ring but after receiving, it stop ringing with no active call and no sound. Any solution?
thanks
sadat007
After installing Pocket Talk and configuring it I get the message that my handheld device is blocking UDP port no 8000 and 5060. Of course it isn't but I can't make callas. Has anyone had the same problem?
installation unsuccessful
It fails to install for me...
I connect my HTC Mega (Windows Mobile 6.5, moded rom), I start the setup, my phones screen shows the installer but than says "Installation of NCH Swift Sound Pocket Talk.CAB was unsuccessful"
Doesnt matter if I choose MainMemory of StorageCard.. there is plenty of free space on both of them.
Any Ideas? Are there any prerequisites? I checked the NCH forum but couldnt find any help...
PS: trying to install directly from the .cab it leaves on my storage card wont work either
Hi sorry for my bad english, setup doesn't work on my hd2 why???
Franky24 said:
I sincerely don't know the use of that softphone over the built-in VoIP for WinMo (WM65VoIP.cab, ultimate.VOIP.WM6.5.cab - available in several threads here) - except you need 2 lines? Especially as these guys do not use the WinMo address book! I don't want to manually add 600 adresses to any additional phone book.
The above mentioned cabs integrate into WinMo and use WiFi or 3G-connections. The phone rings as ususal and displays who called (from WinMo address book). The call is even entered into WinMo callog (only disadvantage: You don't see if a call was made/received via GSm or VoIP). I use them on my TP2 (WinMo 6.1), HD2 (WinMo 6.5.5) and even had a cab file for HTC Artemis (WinMo 5). All works/worked pretty well
So what's the use of these softphones?
Cheers, Franky
Click to expand...
Click to collapse
Myself some hours ago said:
I'm also using WMVoIP and my phone is enabled by default to use VoIP when wi-fi gets enough data traffic, so I don't need other VoIP apps except for second lined. Usually I switched off the phone radio and whitched on the wifi radio and VoIP wasd enabled as default phone line.
But my problem is now I can use VoIP over 3G at no penalization from my phone provider, and I can't set my phone to use VoIP by default.
Is there a way to set VoIP the first option and phone the second one, using 3G (not wifi) ?
Click to expand...
Click to collapse
Editing: I found this xda-dev's app here: http://forum.xda-developers.com/showthread.php?t=730303 and it works fine with one SIP line, in my Kaiser, even using 3G instead of wifi.
Thanks !
It works fine on my HTC Touch Pro cdma with wm6.1.
But I don't like the fact I can't use my original contact list...
Hey Guys,
Im wondering what would be better for me, Im based in the UK and I want to know if Using a VoIP Service such as Skype or get a Dedicated Phone line put into my address? what do you guys think?
- David Scheme
Bought the Atrix last week and unlocked it with the help from the webshop as I'm in Belgium, no problem connecting to Mobistar wich is my provider and data connections works great. But I'm having real problems making phonecalls and recieving calls; the phone reboots or the dialer hangs and it looks like a call is going on when it's not, phone still works but flashing green in the notification area and it's impossible to hang up, need to reboot. This happens like 80% of the times I try to make a call. After a reboot it works fine to call and hang-up one or two times then it crashes again.
Also noted that my Dialer often runs twice in the Running Apps manager - is that normal??
Anyone having the same issues or know what to do, reinstall the Dialer app --> if so how? Is it a hardware or software problem??
A little more info: when I recieved the device it was in a sealed Atrix box but the phone was used and already had an active Blur account so I had to do a hard reset to be able to use it... --> was it returned 'cause of faulty dialer or radio... then resold to me... not nice if so...?
Tried to install dialer one app but it seems only to skin the original dialer...
It's a greate device and works great othervice but in the end it's still a phone... which should be able to make calls...
Help
Ive got an unlocked Atrix too and now in Germany, I have the same problem. Motorola should definitely look into this.
Here's a quick fix for it thou, (not permanent)....
1. type *#*#4636#*#* on the dialer
2. Chose Phone Information
3. Set preferred network to GSM only
Viola...its fixed
problem with this fix is that you wont be able to use your 3G network but the dialer should be working.
Thanks Nazrin (for both replies) !!
It sure did the trick, though no data access is not acceptable on a phone like this!!!
So this meens that all unlocked Atrix's in european GSM networks have the same problems? Haven't seen any others reporting this and there are quite a few in use I've noted in other forums.
Was thinking of trying to have mine replaced (which probably won't be easy and take long time...) but that won't change anything then??
We have to wait for the european version of Atrix rom I suppose??
Any others with the same problem??
No problems buddy, glad it worked..and i have to agree with you..this bug is unacceptable...it seems the phone just ***** up everytime it calls on utms (3g)...im sure there is more people with this problem...
Sent from my Supercharged MOTO ATX
I have the same problem
Hi guys, I have the same exact issue (I'm also in Belgium, on Mobistar). I'm somewhat glad to hear this is a generic issue, and not an issue with my specific phone. At least I can be fairly certain replacing it won't solve this issue then.
I made another post here before I came across this one, has a bit more info: we are seeing modem panics when using 3G + outbound call. I've also contacted Motorola support to no avail:
http://forum.xda-developers.com/showthread.php?t=1028771
You can also read there that I tried another operator, and it did not crash with that one (although 3G did disconnect).
Hopefully Motorola/Qualcomm will start to notice the bug when they release the phone globally, and release a fix.
Either that, or we all have phones from the same bad batch
This bug is really bad for users in europe....cant call on utms...
I really hope motorola takes this seriously cos if there's no fix via software updates then its moto gone for me
Guys, you are all on unlocked att atrix right? I do believe it is a simmiliar software glitch/bug/lock that you have porblems using it on non att networks as the problem with the wifi that it stops working for some of us (check the thread about it for more info). As all suggests there it is a config file problem, unfortunately i or anyone else doesnt know yet which one....
Yeah maybe..but funny thing is wifi is working without a glitch...will have to read that forum later...
Workaround options
So, since it seems we're not gonna get this fixed until there is a new radio/modem firmware available for flashing (and even then..), I've been looking for a workaround.
Found two potential applications that could do what we need: disable data completely when making an outgoing call, or switch to 2G:
- Sanity
- Superpower
I've tested the first (Sanity), and it does not work (fully). It does seem to disable data, but the bands aren't switched so our problem remains. I've contacted the developer here: http://tagliamonte.net/forum/thread-10.html. He seems to be very responsive, so given enough interest, I think he would add the functionality we require.
The second app I only came across today, and have not tried yet. It does not have a function to specifically switch bands when making an outgoing call, but it has a trigger for "Foreground application", so if we make that the dialer/contacts... Question remains if it will be able to do the switch.
Hopefully one of these will lead to a decent workaround for all of us!
Well done unknown...i will try these apps... but the real fix should be from moto...im always reading the net for anything that can solve this issue
reboots on incoming and outgoing calls
Same in Russia on Megafon network, I had to enter 4636 menu and use it as "GSM only". Even this does not fully solve problems, e.g. call forwarding does not show the new destination number while it does actually make the phone divert calls correctly.
My hope is that UK release will trigger new software version which will address this issue. ANYONE has news on this?
FIXED!
YAY! I just fixed this issue
What you need to do: flash the radio from this thread:
http://forum.xda-developers.com/showthread.php?t=1052914
You have to use RSD-lite, since sbf_flash will not work. Flash the 1.87 baseband and enjoy working HSPA (including unlocked upload speeds ^^)
Now I can finally appreciate this phone fully
Enjoy guys!
_unknown said:
YAY! I just fixed this issue
What you need to do: flash the radio from this thread:
http://forum.xda-developers.com/showthread.php?t=1052914
You have to use RSD-lite, since sbf_flash will not work. Flash the 1.87 baseband and enjoy working HSPA (including unlocked upload speeds ^^)
Now I can finally appreciate this phone fully
Enjoy guys!
Click to expand...
Click to collapse
Worked for me as well..brilliant!!!! its working here in germany.....but I wonder the telstra radio will work in my home country with frequencies of 900/2100
Motorola Atrix restart when placing a call
I just got the same exact Dialer problem now, but the flash radio file is gone* in the pointed post, and I don't know exactly how to flash the radio.
Someone can help me? I need the radio file and step by step instruction to how to flash it.
BTW my Atrix 4G works perfect for a year till this Dialer problem started past week.
I also use my phone as a full Linux computer when docked, and it works very fine.
Thanks
* The file was on megaupload, that was closed
No answer
Why I never got an answer of any post I did?
There is something wrong?
Eli
elijacob said:
I just got the same exact Dialer problem now, but the flash radio file is gone* in the pointed post, and I don't know exactly how to flash the radio.
Someone can help me? I need the radio file and step by step instruction to how to flash it.
BTW my Atrix 4G works perfect for a year till this Dialer problem started past week.
I also use my phone as a full Linux computer when docked, and it works very fine.
Thanks
* The file was on megaupload, that was closed
Click to expand...
Click to collapse
Forget about those ways
klingsurf said:
Bought the Atrix last week and unlocked it with the help from the webshop as I'm in Belgium, no problem connecting to Mobistar wich is my provider and data connections works great. But I'm having real problems making phonecalls and recieving calls; the phone reboots or the dialer hangs and it looks like a call is going on when it's not, phone still works but flashing green in the notification area and it's impossible to hang up, need to reboot. This happens like 80% of the times I try to make a call. After a reboot it works fine to call and hang-up one or two times then it crashes again.
Also noted that my Dialer often runs twice in the Running Apps manager - is that normal??
Anyone having the same issues or know what to do, reinstall the Dialer app --> if so how? Is it a hardware or software problem??
A little more info: when I recieved the device it was in a sealed Atrix box but the phone was used and already had an active Blur account so I had to do a hard reset to be able to use it... --> was it returned 'cause of faulty dialer or radio... then resold to me... not nice if so...?
Tried to install dialer one app but it seems only to skin the original dialer...
It's a greate device and works great othervice but in the end it's still a phone... which should be able to make calls...
Help
Click to expand...
Click to collapse
[Sorry for problem in speaking]
i had that problem too , im using CM13 with Marshmallow Version of android
So . the easy way is :
***** search "Default" in settings. then choose " System dialer" as Default ! just it ****
but if there is no search bar in your setting . try this patch:
Android 6 : Setting/Apps then click the setting icon on top(may be diffrent in your case) , then Click on "default ...." then choose " System dialer" as Default! :fingers-crossed:
but in some cases that it didnt work . they have to reinstall gapps .
Or in official Roms , reset will be usefull
any quastions?