Is there anyone who want to tell me how to do this? But step by step! It's SPV C550 with Qtek and WM6-413rom! No such an explanation on this forum about this!
first you must access to bootloader mode in your phone.
next run mtty and enter following commands
info 2
format BINFS
next must to restart your phone and again access to bootloader mode,but don't open mtty!! just run installation of some wm2003 for hurricane (like from qtek8200 or sda II) and its all
sorry for pure english
and where is a original 2003 ROM?
I have the one rom on russian(8200 qtek), but is there somethinn' on english?
I will be greatfull for someone put a link to it!? I NEED THAT ROM!
The russian qtek ROM can be set to the english, but i'm not 100% sure about that.
yes it's tru. russian rom support english language
Help! When i try to format in mtty i type "format ALL" and put SDA II rom(and it's same with qtek 8200)! And then this message lightis on "Data crash, connect your service"?! (i was pissed because it's didn't work in regular way to put WM6, so i typed this command)! I trying to put patched SPL to foramt again (with "format BINFS" command) but seems to be that is not posible! :S (sry for english) phone is working, boot is working too... Is there way to back in my phone or i break it!? i need answer very quickly so know to buy a new one!
Related
I bought a Softbank X01HT after finding this site, and as a total WM5 newbie, decided I would switch the phone from Japanese to English. It took me 5 days of lurking around this site, but I finally did it. Here's a summary of my efforts for those of you who dare follow:
Unlock the phone
I went here to get it done: http://www.imei-check.co.uk
Download and Install English ActiveSync from Microsoft
Get it here:http://www.microsoft.com/windowsmobile/activesync/default.mspx
I'm using v4.2
Disable Advanced USB Networking
If ActiveSync keeps disconnecting on USB, then go to Settings > Connections > Usb to PC, and disable advance network funtctionality.
Here's the thread that describes the problem: http://forum.xda-developers.com/showthread.php?t=276783
Flash with an English ROM
Here's the post that I followed: http://forum.xda-developers.com/showthread.php?t=280566&page=7
Here's the ROM for JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship
Note: the ROMs and the ExtendedROMs are not the same. The Flash will take about 30 mins. It will reset when done, and then ask you to align the screen. I just did as I was told. when done, it automatically started to load the included ExtendedROMs.
Unhide Extended ROM folder
Install fit4cat Hermes Tweaker, I used v1.1a. Get it here: http://www.fit4cat.de/thread.php?threadid=56
From the earlier post, enable 'HSPDA settings' and check all the boxes on the 'security' tab (mount extROM, unlock extROM, allow non certified apps)
Install the Softbank Extended ROMs
Get the Softbank Extended ROMs from this page: http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtendedRoms
Move the contents of the folder to your /ExtendedROM folder then do a HARD reset
How to do a HARD Reset
The instructions for a HARD reset are located here: http://wiki.xda-developers.com/index.php?pagename=Hermes_Resets
Make sure you see the menu with the press 'R' to reset. If you don't, you didn't do it right. Try it again.
Apparently, after a Hard reset, you will automatically start the 'autorun' script for the Softbank Extended ROMs, and this will add the settings for using data over the Softbank 3G network. If you still don't get a data connection to the Softbank Network, you can add it manually. Read this page for details (#17): http://forum.xda-developers.com/showthread.php?t=280566&page=2
Install a Registry Editor
I chose the one included in the Resco Explorer. Even though your processor is by Samsung, make sure you download the CABs for the ARM/Xscale processor.
Get it here: http://www.resco.net/pocketpc/explorer/indepth.asp
Note: you have to install the Explorer and the Registry Editor plugin
Do the Japanese Keyboard Hack
The key thing to remember is that even though your Hermes speaks English, the keyboard uses a Japanese layout. The code for Japanese is 0x0411
[HKEY_CURRENT_USER\ControlPanel\Keybd] "Locale"= 0411 (Hex, not String)
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty] "Layout"= 20411 (Hex)
[HKEY_CURRENT_USER\keyboard layout\Preload] "Default"= e0010411 (Hex)
[HKEY_CURRENT_USER\keyboard layout\Preload\1] "Default"= e0010411 (Hex)
Install Japanese Language Fonts
Now that your Hermes speaks English, you can't see Japanese Web pages. This CAB will fix it. Get it here: http://asukal.seesaa.net/article/6912738.html
Install BTaudio Hack
This hack lets you route the PDA audio to your Bluetooth headset. Without it, you can only use the headset for the phone. It worked fine with my Motorola HS850 set to the "Hands Free" BT profile. I used the version from this post (includes a link to the CAB): http://forum.xda-developers.com/showthread.php?p=1044017#post1044017
and Voila! you are ready to go.
Of course, before you start you should read the following:
http://wiki.xda-developers.com/index.php?pagename=Hermes_For_Beginners
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeFAQ
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
The above is a summary of what I did, and it worked for me. But, of course, nothing is warranted and proceed at your own risk. yada yada.
good job man. really appreciate your contribution
mixersoft said:
Unlock the phone
I went here to get it done: http://www.imei-check.co.uk
Click to expand...
Click to collapse
No need to unlock if you don't want to expend the 20GBP, you just need to donwgrade to bootloader 1.04.
1) Download M3100v3cUnlock.exe from imei-check, but do not pay ;-)
2) Turn phone on and connect to pc (green ActiveSync icon in system tray)
3) Start M3100v3Unlock.exe and close it when it asks for the .unl file with your imei, the device should stay in bootloader (tri-color) screen or a white screen.
4) disable USB connections on activesync
5) Run the extracted 1.04 bootloader-only upgrade, version will be shown as 9.99.999.9 just click next / update.
6) When upgrade ends device will softreset and you'll have bootloader 1.04 in your device which will allow you to flash any rom without CID checking
Then follow the rest of the language switching process with the good mixersoft explanation
4) disable USB connections on activesync
5) Run the extracted 1.04 bootloader-only upgrade, version will be shown as 9.99.999.9 just click next / update.
Click to expand...
Click to collapse
About this step, it means I have to unplug usb cable from pc before uses bootloader ?
thank you.
No, sorry if I was not clear, it means you have to right click on active sync icon, select "connection settings" and disable the checkbox for "Allow USB connections".
thank you. I will try.
Hello! pof;
3) Start M3100v3Unlock.exe and close it when it asks for the .unl file with your imei, the device should stay in bootloader (tri-color) screen or a white screen.
4) disable USB connections on activesync
5) Run the extracted 1.04 bootloader-only upgrade, version will be shown as 9.99.999.9 just click next / update.
Click to expand...
Click to collapse
I use M3100v3Unlock.exe after it asked me for .unl file I close it and device automatically reset. Then I use 1.04 bootloader-only upgrade and try to upgrade
(with disable USB conection on activesync) it says error because can not find conection. How will I do?
Thank you.
Just tell the upgrade utility to continue without verifying... or do not disable usb connections in activesync, iit is not really that important, upgrade will go on equally
I tried to do for many times but failed. And this the message from upgrading.
Error 256 here is the image of it.
http://aycu28.webshots.com/image/3987/2004623998243022487_rs.jpg
What happens if you follow my steps in post #3 but do not do "step 4"? (ie: do not disable usb connections in activesync).
The update should be fine after that, only that it starts from bootloader not from OS and the rom utility says it cannot find the "current" version, but should follow as normal.
What happens if you follow my steps in post #3 but do not do "step 4"? (ie: do not disable usb connections in activesync).
Click to expand...
Click to collapse
in step#3 after I close M3100v3Unlock.exe when it ask .unl file. Device automatically reset, it not stay in White screen or tri-colour screen. So I run
bootloader upgrade, tried with Disable USB conection but failed so tried with normal connect both of them failed as you can see in image on last post.
Please help me.
thanks so much.
ps. anyone succeed with this solution?
taicyber said:
in step#3 after I close M3100v3Unlock.exe when it ask .unl file. Device automatically reset, it not stay in White screen or tri-colour screen.
Click to expand...
Click to collapse
Do not let the device reset, disconnect it from usb (don't worry, it is safe), and close the unlocker then. When unlocker is closed reconnect the device and follow with the extracted-bootloader-1.04 upgrade.
Works!! Thanks
It worked for me. Thank you for your time and energy... Its working on Softbank network in Kanto. I just need to install the .cabs for Japanese. I cant read Kanji very well but it just looks better than Obakemoji..
Thank you very much Pof.
I follow your last post and it work for me.
When my device was blank screen I dis connect usb cable and then
run bootloader upgrade( not tick Allow usb connection in Active sync).
From now, I will start to flash rom and then install Thai and Japanese SIP.
Actually, some Thai sip can use with WM5 Japanese OS can input(visual keyboard) Thai word
but can not read homepage or use handwriting.
thank you again Pop for your help.
HI
I have a question about this.
After language change to English the phone work 100% fine?
All applications, all softbank services and etc ?
I wish to change my phone to this X01HT, but i will do this only if I can use the phone 100% in english.
Thanks
adrianomm said:
I wish to change my phone to this X01HT, but i will do this only if I can use the phone 100% in english.
Click to expand...
Click to collapse
Yes, it will be flashed with an english rom, you will be able to use it in english without problems
One more question for confirmation before flash.
Install the Softbank Extended ROMs
Get the Softbank Extended ROMs from this page: http://wiki.xda-developers.com/index...s_ExtendedRoms
Move the contents of the folder to your /ExtendedROM folder then do a HARD reset
Click to expand...
Click to collapse
in this step, it means that after finish flash rom I have to put Softbank Extended Roms into Extended Roms? How about data in Extended Rom before I put Softbank Extended Roms into I have to delete them all? Or no data in Extended Roms after flash? If it is emtpy extended rom I see.
Wow this is amazing. I did a major Homer Simpson this week when I picked up my new X01HT and didn't think to ask the sales lady whether it could switch to English. My Japanese is REALLY basic, so THANK YOU so much for this thread and to all the guys contributing.
I agree with taicyber, my question is the same....are the Extended ROMs nessisary? Basically I don't care about "extra features" etc etc. I just want a working phone in English which doesn't kill my contract with Softbank in anyway (apart from the fact that doing this will void any warrantee).
Otherwise awesome post and I can't wait to get stuck into this....heres hoping I don't brick it....lol.
Thanks for answer me!
Another question.
You know if have any others language to install ?
English is just fine , but Brazilian Portuguese is my primary language. Any chance to change to Portuguese too ?
Or Spanish?
Thanks again
Sevenhelmets said:
are the Extended ROMs nessisary? Basically I don't care about "extra features" etc etc.
Click to expand...
Click to collapse
No, it is not necessary, you can skip the extended rom step if you want. And if you are not happy after this, you can install the cabs from the softbank extended rom (or any other) later.
adrianomm said:
You know if have any others language to install ?
Click to expand...
Click to collapse
The languages available are the ones on the shipped roms on the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
You can flash whichever you like, it doesn't have to be JasJAM rom as pointed on the first post of this thread, this was just an example.
I tried to upgrade my athena (french rom) with wm6 english version, and it was the crash
the original rom is dammaged and athena w'ont start enven with hard rest ???
(I did unlock it, it was bought in belgium and its was sim-unlocked).
Any help please to re-install original french rom or any thing else ???
Enter Bootloader mode and check if it says SPL: Olipro
If yes, that you should be able to flash a ROM (the one for your device)
even without ActiveSync Connection
If not, you haven't unlocked correctly.
Don't know what you can do then -_-
Hello,
I have just done the following:
-Unlocked phone.
-Unlocked the super CID.
-Upgraded the SPL
-Ran mtty and formatted, and then installed WM6
The problem is WM6 is sketch for the following reasons.
-Its tempremental. I mean sometimes it turns on and it says "power off".
-Joystick is not working all of the time.
-Quite a bit of it is in Chinese.
The question(s) is:
-Where can I get a good working version of WM6.
-If I am re doing the ROM then can you tell me if all I need to do is run mtty, and format and install?
Cheers
John
http://forum.xda-developers.com/showthread.php?t=330709&page=25
my post
Thanks for the reply.
Its in Chinese though I think.
Can I just change regional settings to make it English?
Or do I need a language pac?
If I can, can someone or you tell me what options it would be as I do not speak Chinese lol.
Cheers
it is in english!
start - 7 - 0 - 2
there you can change the language
Well, despite all the step by step instructions that i tried to follow, i managed to get a G4 stuck on bootloader... Here's what happened:
Device:
Qtek 9100
IPL: 2.18.0001
SPL: 2.18.0001
SIM and CID locked to Optimus Carrier (Portugal)
1.- I connected the wizard to the pc and syncronized it trough activesync 4.5;
2.- I then copied and instaled, in this order, the files Cert_SPCS.cab and EnableRapi.cab to the phone memory;
3.- I powered the phone off and on again and let it syncronize with the pc;
4.- I instaled the new rom directly from the file "TouchNoEvil_4mb" that i got from the forum;
5.- Until 99% the progression bar was blue but then it became red and it gave a conection error on the pc;
6.- Now when i power it on it starts the bootloader and if i connect the usb cable it recognizes it on the bottom of the screen.
I think at this point the solution to start it up again, because it's cid locked, must be instaling the original carrier rom (Optimus Portugal) and then start all over again...
The only problem it's that i can't find the Optimus Portuguese original rom anywhere, so if somebody knows where to find it i'll be gratefull for the information.
Also if there's a solution to install a rom in bootloader mode to cid locked G4 (with wm6 and touch flo) i would be very thakfull.
All help is welcome, thanks in advance,
Hugo Costa
You didn't use SoftSPL/HardSPL before flashing WM6.
Get yourself the stock ROM (i.e. Qtek WM5) for your device, then use it to restore your original OS.
After that, install SoftSPL/HardSPL, then you can flash WM6.
Hi there. My main question is exactly that, will it take the Qtek WM5 original rom, being sim and cid locked???? I don't want to brick it....
Best regards,
Hugo Costa
If you afraid, you can use Typho5 to extract the nk.nbf inside the RUU package (You can decompress it by WinRAR) and see if it has 2 pairs of IPL and SPL. If it is, then the ROM can be flashed to a G4.
Ok, thank you, I'll give it a try and report...
Hello,
I will start with my story: I have a qtek S200 and i have make a mistake i think? a friend off my set that i cane use every rom for your phone. So i have putt this a Vincent rom on it. (that's the only thing i know)
Now i want a new rom but, every Rom for a Prophet that i tray on my S200 stops by the Red/Green/Blue screen.
Can some wane help me to get a working Rom for me or a fix for this problem.
Thanks
(And sorry for the bad English)
i think it is in this topic right? (http://forum.xda-developers.com/showthread.php?t=353547)
the problem. You haven't HARDSPL your Device.
Now, go to bootloader mode and flash PDAVIETTemp ,which can be found here.
PDAVIET TEMP
and HARDSPL your Device.
once you HARDSPL your device. SPL information should be 2.G4.4PDA for PPC G4 or 2.G3.4PDA for PPC G3.
Read WIKI. What is SPL. And how to go to bootloader mode.
Thanks
Hello varanusvincent,
So if i'm right my device was not ready jet for WM6? En after your Prophet_Temp i cane load every Rom 6 in it? I'm right?
Tanks
Edit: I have tray your Temp but i won't work. is there another way to hardSPL my device?
For the second time i have load te Rom in the image stay still at 74% cane i break the operation? And how do i get te boot screan back after a abord?
Smattie said:
Hello,
I will start with my story: I have a qtek S200 and i have make a mistake i think? a friend off my set that i cane use every rom for your phone. So i have putt this a Vincent rom on it. (that's the only thing i know)
Now i want a new rom but, every Rom for a Prophet that i tray on my S200 stops by the Red/Green/Blue screen.
Can some wane help me to get a working Rom for me or a fix for this problem.
Thanks
(And sorry for the bad English)
i think it is in this topic right? (http://forum.xda-developers.com/showthread.php?t=353547)
Click to expand...
Click to collapse
You may try
Just a question: I have still Red/Green/Blue?
My IPL 2.21.0001
SPL 2.20.0001
Still i cane not update?
Smattie said:
Just a question: I have still Red/Green/Blue?
My IPL 2.21.0001
SPL 2.20.0001
Still i cane not update?
Click to expand...
Click to collapse
1. yes, can still update,
2. FORCE BOOLOADER MANUALLY, (very important )
3. Flash NVID for Prophet
4. after restart and activesync,
5. use my Lazy_tool to flash any rom you like....
Enjoy....
Sorry, i'm busy for 8 hours with this ..... phone and it's very hard for me to dot it wright.
So how do i get in "FORCE BOOLOADER MANUALLY" and what do you mean by "Flash NVID for Prophet"
(i'm sorry for all the questions but if read all the Wiki's and guide's but it still not working)
I hope you cane explaine it to me
Smattie said:
Sorry, i'm busy for 8 hours with this ..... phone and it's very hard for me to dot it wright.
So how do i get in "FORCE BOOLOADER MANUALLY" and what do you mean by "Flash NVID for Prophet"
(i'm sorry for all the questions but if read all the Wiki's and guide's but it still not working)
I hope you cane explaine it to me
Click to expand...
Click to collapse
Have you read wiki for prophet?
Here are how to enter bootloadermode
PDA Viet Temp is just to make you back to WM5 no vendor.
To hardspl your device. Read here.
You can HARDSPL your device. Or use lazytool from youzi. Posted from dioxda2.
Lazytool is using softspl.
varanusvincent said:
Have you read wiki for prophet?
Here are how to enter bootloadermode
PDA Viet Temp is just to make you back to WM5 no vendor.
To hardspl your device. Read here.
You can HARDSPL your device. Or use lazytool from youzi. Posted from dioxda2.
Lazytool is using softspl.
Click to expand...
Click to collapse
Hey smattie,
from the wiki, there is a sentence missing after "To enter bootloader, you need to hold the comm manager button and soft reset."
that is " then release the stylus and keep pressing the comm. button until you see the bootloader screen"
Dear VaranusVincent,
Lazy_Tool is a modified version from Youzii's Chinese version, I had that named "LAZY" because I am ~~~~~~~
Hello varanusvincent and dioxda2,
Very tanks for the good explenations and tips. i want to tank you guys for that.
Just another question the SPL is now 2.G4.4PDA cane i run every rom now ore must i do it with a tool?
Smattie said:
Hello varanusvincent and dioxda2,
Very tanks for the good explenations and tips. i want to tank you guys for that.
Just another question the SPL is now 2.G4.4PDA cane i run every rom now ore must i do it with a tool?
Click to expand...
Click to collapse
Don't worry, both way can do.
1. Flash with the tool included in your favorite rom package.
2. or change the nk.nbf in the Lazy_Tool will do ,too.
enjoy~~~
imate jamin boot loader problem
please help me my imate jamin after upgrade shows red green and blue colour iam not able to enter boot loader by pressing com manager and reset button please help
josepgreg said:
please help me my imate jamin after upgrade shows red green and blue colour iam not able to enter boot loader by pressing com manager and reset button please help
Click to expand...
Click to collapse
READ WORD BY WORD~~~~~
http://wiki.xda-developers.com/index.php?pagename=prophet_bootloader
HELP
Hai My Phone Shows 3 Colours And Ipl &spl Nos What Sould We Do
josepgreg said:
Hai My Phone Shows 3 Colours And Ipl &spl Nos What Sould We Do
Click to expand...
Click to collapse
He josep,
Have you this whole topic? You must load the bootloader your self. And what this have you trayed?