Related
Obviously I'm a n00b I just got my 8525 yesterday, right away I upgraded to WM6 went all day today with it working fine, I installed a PockMSN and Windows Live anyways to keep it short I FIGURED I WOULD just RE-INSTALL Windows Mobile 6 to get a fresh phone (didnt know hard reset did the same) Actually it was the 3rd time I flashed the OS and RE-UPGRADED to WM6 to get a fresh phone!!!!
~heres the trouble~
In the middle of the reinstalling WM6 I accidentally reset my computer, didnt realize it right away and, got ERROR 260 I believe, anyways I followed the directions, took out the battery and reset, plugged the USB back and RAN the Offical WM6 Rom of HTC site again and it keeps getting stuck EVERYTIME at 11%, I have tried it like 10 times and it gets stuck at 11%, and I get the same ERROR. Says Communication error 260. I have tried everything I know reset the computer, changed USB cords, and Nothing, everytime it gets stuck at 11%!!!!!!
Any Ideas about how to get my 2 day old Hermes back??
(I know i did a n00bish thing and I am sorry)
same place everytime!!
I tried to reinstall Active Sync, changed USB cables, switched USB ports, nothing!! I keep getting ERROR 262 (thought it was 260 at 1st) and wont get past 11% says no connection. I do notice everytime i try this process, Active Sync isnt connected, but the Hermes is connected to the computer! Cause if it cant read the hermes it wouldnt be able to even start the update process. But 11% everytime its stops
nicknowsky said:
I tried to reinstall Active Sync, changed USB cables, switched USB ports, nothing!! I keep getting ERROR 262 (thought it was 260 at 1st) and wont get past 11% says no connection. I do notice everytime i try this process, Active Sync isnt connected, but the Hermes is connected to the computer! Cause if it cant read the hermes it wouldnt be able to even start the update process. But 11% everytime its stops
Click to expand...
Click to collapse
Perhaps you could try to flash using the sdcard method. So you would not be connected to a pc anymore. Who knows, it could solve your problem. I know one case where installing an official rom cured also a similar problem.
Quick summary of the sdcard method:
Use an empty sdcard formatted in FAT32
Copy the RUU_Signed.nbh file containing the OS to the card and rename it: hermimg.nbh
Enter bootloader mode (OK + POWER + Softreset). Normally, after the 3colors screen, you will get "Loading" followed by a description of what is on the card.
When ready, press power and... wait...
Good luck (The phone is NOT connected to the pc)
sounds good but I dont have a MicroSD card reader to do that. And I am using an Offical HTC WM6 ROM, thats all I ever used was the offical WM6 Rom from the AT&T site. Like I said, I was able to install WM6 already, but me being a complete idiot was Flashing the upgrade ROM to get the Hermes back to fresh phone factory settings. But I accidentally reset the computer in the middle of Flshing and since then I have never been able to get it to install again, everytime I turn on the phone I am stuck at the Tri-Color Screen, I am able to restart the upgrade process, but it stops at 11% says ERROR 262 and no connectivity!!
please anybody knows anything, this is the only thing I got, my mom got it for me! We cant afford to get a new one, or even fix it, it was a special present!
nicknowsky said:
please anybody knows anything, this is the only thing I got, my mom got it for me! We cant afford to get a new one, or even fix it, it was a special present!
Click to expand...
Click to collapse
Ok. I am a bit annoyed if you cannot try the sdflash method (BTW you can ask somebody having a PC to prepare the card for you.)
There are different things you can flash on your hermes. Radio, OS, Splash screens, Extended Rom,.... The most tricky thing is the radio rom as a failure there has a higher probability to brick your pda.
This is why i believe it is very dangerous to flash right away without some readings and understanding about what you do. i hope you had some experience here.
Did you first install hardspl (olipro 2.10 )? This is not mandatory but is a very good protection against bricking. (here the excellent guide of mrvanx: http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27 )
Did you flash also a radio rom? (Was it included in the "package" you wanted to flash?) If yes, i am a bit anxious that a stop at 11% is a problem... BUT, if you flashed a radio rom, it goes very, very, very... slowly. And gives the feeling that it freezes. For the "radio" part it is normal . I hope you did not stop the process too soon.
Once again, try the sdcard method. Or try to flash an official rom (most of the time containing a radio part...) and be patient. Can take till 25 minutes.
If this does not work, do not panic yet. Others had also problems before you: go there and start reading : http://forum.xda-developers.com/showthread.php?t=286755 and here http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
There is a hope to solve your problem. Good luck
Try to flash a radio ROM, turn the device on and if it stays at the bootloader screen (the tri colour screen) make a note of the version displayed. Hook up the device with USB cable, dont worry about activesync.
Download and unzip a radio ROM upgrade (try this one), run the exe, select your bootloader version on the screen....follow the screens through and see if it works.....radio roms take ages to flash so DO NOT disconnect your device.....if it doesnt work you most likely have a corrupted radio bootloader.............which is likely since the radio flash takes the longest ammount of time the reset probably occurred halfway through this.................unlucky
Give it a try though.
The lesson to learn here is to READ THRICE and flash once.....never ever disconnect your device out of impatience (which i suspect has happened many times on a radio flash) and be carefull these devices are expensive
mrvanx said:
The lesson to learn here is to READ THRICE and flash once.....never ever disconnect your device out of impatience (which i suspect has happened many times on a radio flash) and be carefull these devices are expensive
Click to expand...
Click to collapse
I could not say better
I know, the MicroSD method is nice, but when I got the phone the guy gave me a MicroSD card, but not the regular SD card to read it on computers ( i do have a card reader) Guys a super appreciate the replies> I am gonna try everything rite now, but real quick is my Hermes FUCT??? or is this error fixable??? It is just losing communication everytime at the exact same place, it just seems like something is fixable, but my sorry luck i cant get over the hump!! I will let ya'll know ASAP
okay, here is the thing, Every Hermes ROM update utility I have downloaded wont work, i start it and the VERIFY INFO ON HERMS windows appears about 2 minutes late I get ERROR 260 and it exits! Now when I use the OFFICAL WM6 upgrade ROM from the ATT/HTC site it seems to read the HERMES and wanna start the upgrade process, but thats where it ends at 11% No other RUU I have used or tried has even gotten that far, I just get ERROR 260 before it starts and I have to exit.
What it looks like is I cant communicate with my HERMES at ALL!! Active Sync wont see, only when I reset my computer and reset the HERMES and I plug it in a different USB port, it says Installing New Hardware and HTC USB something and then Hardware has installed and is now ready to use. But Active Sync wont recogniZe it
I'm sorry to tell you that but i think you ****ed up your phone and it is as useless as my ****ing jasjam.
please give us some detailed info s about your hermes like IPL SPL GSM STATUS....
When I am in Tri Color Mode I see.......
HERM100
IPL-1.04
HERM100
SPL-2.03
and SERIAL at bottom, then USB when I plug it in to my computer
I had upgraded to WM6 before on it, but me being a impulsive FOOL, i flashed it again to get me back to Factory Setting (didnt know HARD RESET did the same) and I accidentally RESET my computer in the middle of ROM Upgrading and ever since I cant get past 11% when I try to do it again (using the OFFICAL WM6 ROM from HTC)
and I cant get any communication with mtty although I dont know much about that app, I get a CANT load screen appear
is your phone KITL enabled.
hold the COMM manager button + POWER button + OK button (the one on the left side under the jog wheel) and reset with stylus.
if you see KITL dialogue then it is KITL enabled (MY bricked jasjam is KITL disabled)
if it is KITL enabled then read : http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES and your phone will be just fine.
if it is not then your phone is ****ed up just like mine
HA HA, me and my phone guy (well the guy who I bought my Hermes from) HAVE FOUND A FIX to get the phone outta Bootloader Mode and back into OS!! in my case WM6!! I have to do it 1 more time to fully confirm the method!!!!!!!! My friend is calling "SHOCKING THE PHONE" but not really shocking anything!! I am reluctant to share the method, but this site needs more people to actually HELP out others
nicknowsky said:
HA HA, me and my phone guy (well the guy who I bought my Hermes from) HAVE FOUND A FIX to get the phone outta Bootloader Mode and back into OS!! in my case WM6!! I have to do it 1 more time to fully confirm the method!!!!!!!! My friend is calling "SHOCKING THE PHONE" but not really shocking anything!! I am reluctant to share the method, but this site needs more people to actually HELP out others
Click to expand...
Click to collapse
Hey dude!
Would you kindly provide me the sulotion.
I would appreciate it.
nicknowsky said:
HA HA, me and my phone guy (well the guy who I bought my Hermes from) HAVE FOUND A FIX to get the phone outta Bootloader Mode and back into OS!! in my case WM6!! I have to do it 1 more time to fully confirm the method!!!!!!!! My friend is calling "SHOCKING THE PHONE" but not really shocking anything!! I am reluctant to share the method, but this site needs more people to actually HELP out others
Click to expand...
Click to collapse
Mmm... do i understand correctly your post? Are you hesitating to help others because your method is risky, or because you express some exasperation about people on this site? In this case, do not forget that all people here are exchanging ideas, questions etc on a totally free base without any obligation. In the limits of there knowledge. Encountering a problem after flashing a device is the only responsability of the user. We just try to help. But i prefer to believe that you found a method, still risky, that you need still to test
That said, it seems that there are an increasing number of hermes encountering a problem with the radio part. It seems that stopping a flash at 11% is a symptom of that. See some consolidation of those problems here: http://forum.xda-developers.com/showthread.php?t=349461
I hope you will find a solution for your problem and moreover i hope that none of you bought a hermes second hand with an already radio part problem. If so try always to get your money back...
I AM trying to confirm my method BEFORE i share it, because it might work on mine, and I dont wanna screw anyones hermes up more
nicknowsky said:
I AM trying to confirm my method BEFORE i share it, because it might work on mine, and I dont wanna screw anyones hermes up more
Click to expand...
Click to collapse
Why don't you answer my PMs????
Please tell me your sulotion and let me try that if you have any
I posted this in the Titan forum by mistake. Sorry for the duplication
I need some help...I'm freaking out...
I cooked a ROM with dcd's version 1.6.9 for BELL a few days ago and it was wonderful and worked great.
Today, I tried to upgrade to version 1.6.10 and I f___ed something up.
It starts the htc boot up screen as usual, then the Bell screen comes up as usual, then a Sprint screen comes up briefly and then the Windows Mobile screen comes on and HANGS........
I have tried cold reboots, and nothing. I cant connect to it with USB.
I can kick myself for making an error because I was rushing......
Can anyone please help............................
Edit/Delete Message
koilmaker said:
I posted this in the Titan forum by mistake. Sorry for the duplication
I need some help...I'm freaking out...
I cooked a ROM with dcd's version 1.6.9 for BELL a few days ago and it was wonderful and worked great.
Today, I tried to upgrade to version 1.6.10 and I f___ed something up.
It starts the htc boot up screen as usual, then the Bell screen comes up as usual, then a Sprint screen comes up briefly and then the Windows Mobile screen comes on and HANGS........
I have tried cold reboots, and nothing. I cant connect to it with USB.
I can kick myself for making an error because I was rushing......
Can anyone please help............................
Edit/Delete Message
Click to expand...
Click to collapse
Try the hard reset.
If that doesn't work then try the bootloader mode and reflash it.
Hard reset
Hard reset did not help, it hangs on windows mobile screen.
Can u give me a bit more detail on how to get into the bootloader mode?
I figured it out. You have to but it into bootloader mode by pressing the POWER and CAMERA buttons at the same time and then reboot.
Then load ROM as usual'
Thankyou
You are the fing master. OMG mine was in the EXACT situation and i was freaking out. its currently reloading the ROM back on. Thank you soooooo much.
it probably happenned because modules overlapped, run g'reloc before building to avoid this.
Through a comical accident, my FUZE was trhown agaisnt a wall and landed on a computer keyboard, which then Bluescreened. Why ..I don't know. But the phone came apart. When I put it back together, it started with a error message....
It boots into the Tri colored screen and says ROM loading error, please try again.
I originally had OlipPro spl on the device. After reading for about an hour, I tried to reinstall the hard spl. that didn't work. I found a stock spl from the forum here and tried raphimg.nbh. That boots but goes into a Loading... screen with no other action.
I can't imagine what caused this...I was in the dentist office when the accident occured. I would expect this to occur if I was flashing or something.....
Any one have any thoughts...or is this bricked
alodar1 said:
Through a comical accident, my FUZE was trhown agaisnt a wall and landed on a computer keyboard, which then Bluescreened. Why ..I don't know. But the phone came apart. When I put it back together, it started with a error message....
It boots into the Tri colored screen and says ROM loading error, please try again.
I originally had OlipPro spl on the device. After reading for about an hour, I tried to reinstall the hard spl. that didn't work. I found a stock spl from the forum here and tried raphimg.nbh. That boots but goes into a Loading... screen with no other action.
I can't imagine what caused this...I was in the dentist office when the accident occured. I would expect this to occur if I was flashing or something.....
Any one have any thoughts...or is this bricked
Click to expand...
Click to collapse
A brick it is not. After reading the notes in the Disaster Recovery thread, I found a stock ROM in the WIKI and tried to flash it. Because I could get a USB connection, the ROM loaded. And, after a couple of hard resets, I now have my FUZE functional again. Thanks for the WIKI and all the experts here that contribute.
alodar1 said:
I can't imagine what caused this...
Click to expand...
Click to collapse
Something to do with the wall?
I expected this to be something like "What does error 206 meanzorz111!!1?"
Quite refreshed to see that that was not the case. I am glad you fixed your error. I have had issues like that with my kaiser before, and since I got windows 7, the comp recognizes the device even from bootloader. Congrats on solving your issue, best of luck in the future, and dentists are bad
I've never had a cavity, ever. Brush once a day and haven't seen a dentist in 3 or so years $$
Ok, so before the general populace of the forum, looks over this post thinking it's some noob who cant read through the forums to solve there own problem, i would like to say thanks in advance to anyone who can seriously provide some help.
Problem is as follows:::
1,)Phone is working fine using mini-winmo+cyan droid
2,) -PROBLEM- My android stops working, so now im stuck using a lite version of winmo
3,) Tried formatting the sdcard with the lite version winmo built in sdcard formatter, doesnt solve anything, dont exactly know what i was trying to solve with this step.
4,) I decide to get a nice fancy version of winmo, figured it would be as easy as just flashing it once n done.
5,)Decided on going with Ozrom, looked the best at the time.
6,) Run the ruucustom as admin, everything goes fine.
7,) -PROBLEM- after flashing the first boot leaves me stuck on the bootscreen.
So after all that i took the advice and tried to get back to the stock Tmous ROM, but as im typing this im still stuck on the Stick together screen, and also just for a control group i downloaded the latest HD2 cell winmo rom release, and that left me hanging on there version of the boot screen.
Same problem, different roms.. stuck on the loading/boot screen.
But, with the stock rom after playing around with removing the battery, simcard,sdcard and what have you i got the stock rom to boot!!!! I was so excited, i skipped the "How to use the on screen keyboard" tut and was typing in my email info when the phone reset on its own and all my hopes went down the drain... hopefully i will get some help on the issue, and like i said previously in the first paragraph i appreciate any and all help.
thanks.
---UPDATE---
Phone is on and working, intermittently.
When i plug the phone into the charger and wait for the amber light, it will boot up and actually enter into windows, now heres the kicker, removing the charger and using the phone will result in the phone turning off and restarting itself, hanging on the stick together screen.
Removing the battery, and replacing the battery after i push all the buttons, the same way you would power cycle a TV remote, and then connecting it to a charger is the only way ive been able to maintain the operation of the device.
Any ideas?
Try doing task29 reinstall winmo Rom of choosing.. see if that helps.. also I flash everything from bootloader. Also check battery pins make sure they aren't bent..
Sent from my Mytouch HD2
Hi All,
I have a HTC HD2 TMobile USA. I'm experimenting some issues when rebooting the phone.
The phone works fine but when I reboot it, it stucks (lots of time) in the bootloader screen. Sometimes, after rebooting several times it works. Other times, I have to hard reset and then it works again.
I tried the following and it didn't fix the problem:
* Flash new radio (now 2.15.50.14)
* Flash new ROM (now last Energy with build 29xxx)
Any thought around this issue?
Thanks,
Pipaman
Please help with this issue.
If you need any clarification just ask me but the issue really exist and I cannot send the phone to the service because I'm in a different country.
If I was you I would firstly Reinstall your T-Mobile stock ROM follow by a Hard reset and than reinstalling a Custom ROM follow by a Hard reset.
I don't get in what way that is different to restore the TMobile original ROM. I did that several times before installing a new ROM.
I did that:
* I flahed a stock rom: Now I'm back to stick together screen.
It was working fine until I reboot after a couple of days. Then, it doesn't start again: stuck in 'Stick together' screen.
It's very weird because if I hard reset the phone it works again but it's impossible to live with a phone that cannot be restarted.
I tried changing the SD card to see if that was the problem and the same: after some time using the phone I cannot restart it.
i have t_mobile also and this thing happend to me after flashed back from wp7. and android,....i did task 29 then frelash custome rom .reflash radio.reformat sd,took my sim out and clean it,and now its good,dont know if this thing will back,hope not ; )
I tried that but the same. After using sometime the phone it doesn't reboot again. I tried everything here, I'm near to throw it to the wall
pipaman said:
I tried that but the same. After using sometime the phone it doesn't reboot again. I tried everything here, I'm near to throw it to the wall
Click to expand...
Click to collapse
Just a question, do you have good battery connection? are the pins in normal state?
Thank you for your answer.
Yes, all the battery pins are fine. To clarify this point: if I hard reset the phone it works fine until I use it normally. I mean, if I reboot the phone after hard reset it reboots perfect.
However, if I start using it installing any stuff, set-up facebook profile or email accounts, the phone works fine until I reboot it.
Now, I'm using a stock ROM:
TMOUS_3.14.531.1
Radio 2.15.50.14_2
I tried different ROMs and different Radios and it's exactly the same: after using a couple of days if I reboot it, it will stay in the bootloader forever until I hard reset it again.
I found that if I don't configure facebook profile the phone lasts more but it's very weird and annoying.
Hey i got the same problem as you did. It's behavior is erratically. Given the fact that the phone is out of the box. . dude i didn't mod. I feel uncertain using such device when it can go back to "stick together screen" at anything. If i were you, I would just send the device for replacement. That's the reason why people buy iphone. I can see there are tremendous info flowing around here, but ppl seems too busy with developing, no one seems to care about troubleshooting.
Good to hear that I'm not alone with this issue. Unfortunately, I've bought the phone in the US in a trip and I'm in Argentina now so replacement is not a possibility
I understand now why people buy iPhone even. My problem is that I like to hear FM Radio and in my country the best GPS maps are for Garmin that has WM support.
For me this phone was exactly what I wanted. Of course, if it works!
At this point I tried everything: different Radios, different ROMs, not installing anything, etc. but it always happen again.
Now, I try not to reset the phone and I'm very careful to charge it everyday! It looks like I bought a tamagotchi.
What is the SPL version in Bootloader mode?
I'm using SPL 2.8 but the same issue was happening with the default bootloader.
I am just a bit confused, you say you have SPL 2.08(.0000 or .HSPL) and a 3.14 TMOUS ROM.
If that is the case then the RAM would be very low and possibly running Facebook would freeze it.
I'm using:
SPL 2.8 (I cannot verify exactly the version because I don't want to reboot the phone )
OS Version: 21913.5.0.94
Manila: 2.5.20181424.0
ROM: 3.14.531.1
Radio: 2.15.50.14
Protocol: 15.42.50.11U
I identified that Facebook was generating some lack of stability so I don't use it at all, not even to show the photos in the contacts.
I tried to use different ROMs but the stuck at bootloader was the same and I got some problems when the phone became locked: I was unable to unlock it so I had to reboot and guess what happened in the bootloader (I tried Energy ROM with both OS versions, I tried also Task29 before flashing)
kikikuku said:
ppl seems too busy with developing, no one seems to care about troubleshooting.
Click to expand...
Click to collapse
BINGO. your absolutely right about that.
Issues with hanging and rebooting have been popular and if you try sd card ROM installation and "RSA radio fail" comes out while flashing then its probably a hardware problem and theory is that it is from heat so advice, get a replacement. I think there is a batch of hd2 phones that have faulty manufacturing