Hey, I just tried to install DCD's newest ROM and it looks as if i may of bricked my phone. When i connect it to my PC, Active Sync will not even pick it up. this happened right after i ran Hard-SPL-MFG to unlock the phone... I did try and run the titan_exitbl but no luck. I also attempted to run the relocker but i would not even run.. any ideas?
thanks!
recover from flash
Are you at the 3 color screen? If so you need to unplug the USB and replug it again as per the instructions. You MUST follow the instructions EXACTLY or your flashing will be very scary experience.
If you are not at the 3 color screen, you need to get back to the bootloader by pressing power+camera and soft reset. This will get you to the 3 color screen. Then have a look at the version of bootloader you have. If it doesnt say Olipro 1.20 or 2.40 you still have the locked bootloader and you can flash a stock carrier rom. If you have 2.40 you can flash to the 3.16+ rom and then flash the new radio this way or via sd card install which will be more painless and less scary.
If you dont know what an sd card flash is, I would search the forums here. Over at ppcgeeks you can look up imcokeman's posts and see instructions how to do a sd flash.
If you are are real noob, I would suggest staying with non gps roms at this stage because the change of radio rom needed to enable you to flash a gps rom will almost certainly lead to sleepless nights wondering if you have bricked your machine.
Most important thing to realise is that the machine is almost certainly not bricked. But you might have a few more scary moments before you get your machine back working again. You might also need to call your carriers service desk a number of times to get your provisioning data back working.
Check all the way through these two posts and dont sweat too much. With effort you will get your machine back. The answer to your problems is listed in one of these threads, but you need to dig a fair bit to find it. The posts contain lots of problems that people had flashing this rom, and I am sure your exact problem was there and solved. Its I believe somewhere in the second link I have listed here.
Good luck. i feel for you.
http://forum.xda-developers.com/showthread.php?t=371314
http://forum.xda-developers.com/showthread.php?t=362566 particularly this bit http://forum.xda-developers.com/showpost.php?p=1856032&postcount=216
thanks ill take a look, as a side note i am currently at the verizon logo, i can boot to the bootloader screen (red,green,blue) and when i connect the USB cord it does switch from Serial to USB on the screen... but gets stuck there. Active Sync shows no device connected.... I am running 2.40.Olipro
Thanks again
optyhtp said:
thanks ill take a look, as a side note i am currently at the verizon logo, i can boot to the bootloader screen (red,green,blue) and when i connect the USB cord it does switch from Serial to USB on the screen... but gets stuck there. Active Sync shows no device connected.... I am running 2.40.Olipro
Thanks again
Click to expand...
Click to collapse
It doesn't need to active sync. Once it switches to USB you are ready to flash.
Stuck at Verizon Screen/HTC Mobilty Screen
If you are stuck at the VZW screen then you have only flashed one of the two essential parts. You need both (ROM and RADIO) to make it work. 3.16+ ROM will not work with the old radio. You need 3.27 radio.
Use the camera+power+soft reset and you can flash the one (new radio or new ROM) that you are missing.
See dcd's thread about the 2.3.2 rom. He has added a HUGE new disclaimer.
http://forum.xda-developers.com/showpost.php?p=1952956&postcount=1
Well nothing really worked so i used a sd card to flash back to the stock verizon ROM, i then attempted it again and got it all working!!!
I have a Sprint HTC touch pro. I unlocked it the day I got it, and have flashed mightyrom6, juicy, and a couple others to it without problem. What I'm seeing now is the ROMs are going very slow, freezing when I just try to read a text message, etc. I have a feeling that some things from the ROMs aren't completely getting wiped when I flash the new ROM. Someone suggested flashing the stock OS to the phone to clear this garbage. Is this a good idea? Does anyone else have this problem, or a solution to it? Thanks
It's definitely worth a try, it worked for me.
I had been trying out all the new 6.5 ROMS out there. At some point it wasn't slow per se, but it would completely freeze, and then I'd have to soft reset. *IF* it got past the loading screen, it would take me to the initial configuration, as though it had been hard reset. I couldn't make it 48 hours without it doing that. Didn't matter which 6.5 ROM I tried, it always did the same thing.
(shameless plug for Sashimi and Makisu! Lifesavers!)
Tried leaving out the microSD card in case it was bad data - no luck.
Tried not configuring anything - just using it as a phone - in case it was a corrupted CAB or something. Not that either.
At the end, I gave up and I was prepared to take it into the Sprint store. (I bought my phone on Ebay, so no idea what kind of success I would have had, if any.) I flashed back to stock rom, installed my cabs and user settings, etc. and waited for it to happen.
It's been over a week now, absolutely no problems.
Long shory stort: flash back to stock ROM and see how it turns out.
Good luck!
weso has a good point...But
Flash back to stock, hard reset.
Flash your ROM of choosing, hard reset
enjoy new Rom
I find after a couple flashes that I need to flash back to stock hard reset then flash new Rom. After that I tend to have a much more enjoyable experience.
Interesting. I wonder if there's any way to explain that, or if we have to put that in the X-files folder - just one of those things.
I also ALWAYS go into the bootloader manually by rebooting with the reset button and holding power and vol-down. Not sure if it makes a difference or just makes me feel better, but I've had zero issues doing it that way, so that's what I keep doing.
Mightyrom6
Hey out there! Can anyone help with this problem I am having. With the MightyRom 6 on the Touch Pro for Sprint? When Touch Flo is enable and you slide the tab to settings and tap All Settings on the bottom left it will go to Connections Only! It will not go to the All Settings screen. Can anyone help me? I know how to edit the registry but, can't find anything out there. Please Help!
Many believe this happens due to not "flash dancing" (flash then hardreset).
Be wary of doing this with generic stock roms, ive had an experiance in which my prl and qcn files were reset to the generic stock ones of a diffrent provider, which in turn got me to take the phone in and get it carrer flashed again ( NO CARRIER SPECFIC ROMS OR STOCK FOR TBAYTEL!!! . god bless tbay tell lol, but anyways after the initial flash of a rom you like, before you load it with cabs install one at a time to ensure proper installation and compatability with your current rom. Also before you run any freshly installed apps/cabs be sure to soft reset after install.
My method of flashing
Ensure battery is above 80%
Fully synced and connected
Freshly rebooted computer and phone
Update/Flash phone
Hardreset after customize and initial setup
Re-configure customise/etc
soft reset
Good to GO!
Also with every flash there is the posability of it just being a bad flash.
in some cases the freezing and such may be pagepool/Driver issue's with your hardware
I've been searching on how to completely restore my (T-Mobile) HD2 on this forum for a while and haven't came to it, so sorry if I'm repeating any threads.
Basically I'm fairly novice in flashing and things in that nature. I've been flashing updating Energy ROMs on my HD2 for about six months since I got the phone. Which was fairly simple to do. Since WP7 ROMs, I've switched over to flashing those. The problem is that 99%, it'll flash fine, then won't get past the boot screen. And on the rare occasion it does get past it, I can't turn it off, or else I'll have to trying getting past the screen 1000 more times to be successful. I think I have all the requirements to run WP7, but not exactly sure.
So I would like to know what to download and flash/ install for it to be as if I bought this from T-Mobile today.
Thanks!
I need help with this too..I craked my screen and am going to send it to t-Mobile so they can send me a new one, but I want to put it to factory reset. Ive looked all over cant find them...the post a couple up...links are dead
you do realize that if you cracked your screen your warranty is already void. it doesn't matter what software you are running at this point.
diazjohn said:
you do realize that if you cracked your screen your warranty is already void. it doesn't matter what software you are running at this point.
Click to expand...
Click to collapse
Maybe they have the insurance feature?
Late answer, but go herehttp://www.t-mobile.com/wmupgrade/ to get stock ROM.
follow steps here http://forum.xda-developers.com/showthread.php?t=623402
your done.
how_weird said:
Late answer, but go herehttp://www.t-mobile.com/wmupgrade/ to get stock ROM.
follow steps here http://forum.xda-developers.com/showthread.php?t=623402
your done.
Click to expand...
Click to collapse
Sorry for MY late reply, but I put this phone away for a while and now my dad wants to use it. I've gone though the steps, but I can't get past "6. Hold the volume down key and power on your phone. As soon as the coloured screen changes to grey, RELEASE volume down." It never turns grey. I'm one step from taking this phone and throwing it out my window to see it shatter.
art0605 said:
I've been searching on how to completely restore my (T-Mobile) HD2 on this forum for a while and haven't came to it, so sorry if I'm repeating any threads.
Basically I'm fairly novice in flashing and things in that nature. I've been flashing updating Energy ROMs on my HD2 for about six months since I got the phone. Which was fairly simple to do. Since WP7 ROMs, I've switched over to flashing those. The problem is that 99%, it'll flash fine, then won't get past the boot screen. And on the rare occasion it does get past it, I can't turn it off, or else I'll have to trying getting past the screen 1000 more times to be successful. I think I have all the requirements to run WP7, but not exactly sure.
So I would like to know what to download and flash/ install for it to be as if I bought this from T-Mobile today.
Thanks!
Click to expand...
Click to collapse
I have done a dozen of flashings on my Tmobile HD2 and works fine so far. Thanks to XDA forum all the tools I need are available right here on XDA !!! You just to search them out yourself (sorry I don't have the links ....... ).
I suppose you know how to flash your phone so I will not explain details how to do it.
In brief, to install WP7 this is what I suggest you should do -
1. Update flash radio to the latest available update from Tmobile US website, regardless of what ROM you have at present (version 2.15.50.14 is the latest, I think).
2. Flash HSPL 2.08 to your phone to maximize 576 RAM usage, if you have it (do not use SPL 2.08.000 as this will recognize only 448 RAM size).
2. Use Task29 to clean out the existing the existing ROM on your phone (this will erase your OS and you will only be booting on the white HTC logo screen). This will clear out those ROM leftovers on your phone.
3. Flash magdlr 1.12 or 1.13 on your phone (press power button on boot to show magdlr menu).
4. On magdlr menu scroll down to no.5 USB flasher, connect your phone to pc and run dwi.exe on your WP7 installer and wait till installation has completed.
I have done these procedures a dozen times already I have not encountered problems so far. I have been flashing and flashing to choose the best ROM (WP7 or WM6.5.x) I want. On personal note, I think I would settle for WM6.5.x cooked ROMs because of usability and handiness (I find WP7 too complicated to deal in terms of tweaks and handling of personal videos/photos file security).
Some notes:
a. You need to flash radio and HSPL only once.
b. Use Task29 every time you need to install a new ROM (your choice, but recommended).
c. After Task29 you can start out clean and flash to stock ROM or any other rom you choose.
d. There are dozens of videos on YouTube to help you flash but I have not seen one using Task29 to start the process of flashing.
This works for me, hope it does to you as well. Good luck !!!
Hi guys,
I successfully flashed Android to my HD2 a few months back. I used what I believe is Cotulla's rom(?). However the other day my phone sorta died and whenever I plugged it into the charger it would vibrate go through the boot screen and reset at the "1234 go go go" stage. I read some reading on the forum and flashed it back to "RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship" from the HTC website, using the SD card. Windows mobile restored the phone and I started using it again.
I tried to put android back on it and I think I unsuccessfully tried to update the radio after which the phone sorta died again. So I thought ok, no problem, lets get back to windows again. So I installed the HTC rom again through the SD card, which the screen told me was successful. But now I can't get the phone to boot or go into bootloader or anything. When I plug the charger in, I get a vibrate and HTC bootscreen, with the red writing at the bottom left and then dead to only do this again and again. If i pull out the charger, the phone just dies. Battery charge was about 50% when it died.
Any ideas or help on how to resurrect my beloved HD2 would be greatly appreciated!
*quick update*
I stuck the phone in the fridge for a while and managed to get it into the bootloader just once and flashed the official winmo rom again, which was successful but still dead phone!
What made you decide to stick the phone in the fridge??
What is your SPL version??
mentalityx said:
What made you decide to stick the phone in the fridge??
Click to expand...
Click to collapse
Probably the dozens of threads that talk about successfully flashing only when the phone has been cooled.
@op it doesn't look good. Usually the fridge trick working implies hardware overheating issues.
Just confirm please, its not a tmous right?
Samsamuel is right, i just read about it and thought hey, why not! plus it got a priceless look from the mrs! lol
It's definitely not TMOUS, its UK Virgin and the SPL was 3.03.0000 if I recall correctly.
When I cool it, I can get it into bootloader, but only once.
well, i still suspect its hardware and unfixable, but there have been cases where for whatever reason a rom suddenly seems to fix it. Try all the versions of the correct stock Rom.
Try the 1.43 the 1,66 and again the 3.14, wwe ones, chilling the phone well before each flash, a good 20 mins.
Hello. My HTC Titan is fully unlocked as I installed a custom ROM, right? That gives me the right to download XAP's from the inbuilt browser on my phone. I have installed Supermusic, XAPhandler and Devstore7 on my phone. Now, when I turn the phone off, and try to turn it back on, it stops at the HTC boot logo and the red mini-light on left-top corner is on. The only way to use my phone again is to go to SPL mode and factory reset everything. I have been doing this for a week now and Iam getting so irritated.
Does anybody have any idea what it could be?
Also, when installed a custom rom, the apps on your phone get access to your full device. Does this increase the usage of RAM? I know that my phone is morevulnerable for malware because it is running a custom Rom. Is there any sort of antivirus app or software I can install to reduce the chances of getting infected?
I would be very greatful if somebody who knows about fully unlocking a device could answer my questions.
Thanks
I recommend flashing the ROM again.
Remember, when flashing a ROM, your computer should be doing nothing else but that. Close off processes if you have to in order to free up RAM before flashing.
It isn't uncommon to get a "Bad" flash or even a bad download before the flash. So re-download and then re-flash from a Flash-ready computer.
Hope this helps ya, let us know.
Tabbii said:
MOD EDit: Quote removed
Click to expand...
Click to collapse
I really REALLY REEEEALLY hope that it doesn't work for you.
The custom ROMs were awaited hopefully so that we could support our homebrew community that make some fantastic functionalities available on our phones. If you want to pirate stuff, kick developers' balls and then expect other developers to help you when pirate xaps f*** things up on your phone - I think every second anyone helps you, a cat dies somewhere in this world.
Please pay for the apps and support the developers instead of stealing their hardwork. It costs them their normal lives, eyes and hours of football matches.
MOD Notice
Do not discuss obtaining paid for apps for free, we do not support piracy on XDA. Support the developers, purchase the Apps!!
I am sorry
Right. I am sorry. I will buy these apps from now on
Pardon me for my bad behaviour, it wasn't meant to offence anybody.
Sorry once again.
And Btw, can I install things like homebrew apps now, because I have fully unlocked my ROM? What about Devstore7 and such? Any good idea how to tweak my phone with the registry editor? I am trying to set the WIFI to always on, is that possible?
I am only wondering, no offence to anybody.
Thanks,
Tabbii
Did you solve the reboot hanging problem? I'm not using any shady apps, hell I'm not using many apps at all at this point. Waiting for the HSPL fixed (mine is one of those stuck on 2.5 and can't flash HSPL or custom ROM).
Any way. Mine just started doing some weird ****. Some of my zune content can't be synced successfully (meaning it syncs and when I look for it on my phone it is a black box only. Some pics and music are just black icons, no labels and not there.) I connect to zune again and it says do more with a zune pass. I have a zune pass. Any way. I reboot the phone thinking that was gonna help and when it came back up, it had done a half ass hard reset (meaning nothing was there and had to go thru the motions of setting it up again, but in settings/about only 3GB was free)
So I flashed the stock ROM again from RUU not gold card (last time I did it thru gold card) upon completion, I set it back up, sync a couple songs and pics to it and I reboot it, no problem. So I sync some more to it, no problem after reboot. so I'm thinking it's good. So I do a FULL sync and install a few apps, then reboot. all good!
Then I install a few more apps and all have a problem and say needs attention, click here. I do and retry, but failed on all of them. so I reboot the phone (knowing what was gonna happen) well, this time it sat on good bye forever, never completely shut down, so I take the battery out and put it back in and start it up and for the first time it hangs on the HTC screen. So I go into SPL mode then try to boot again, hangs still. So I go back to SPL and so factory reset and now Im setting my phone up for the 3rd time today!
Any ideas?
I didn't want to give every app access to my phone so I installed Ultrashot's ROM. It has a root manager application to choose which apps have root access. Since you're gonna reflash anyways, I suggest trying Ultrashot's. I think it has more features than the DFT ROM, but you can decide that.
Good luck!
GreenGrenadez said:
Did you solve the reboot hanging problem? I'm not using any shady apps, hell I'm not using many apps at all at this point. Waiting for the HSPL fixed (mine is one of those stuck on 2.5 and can't flash HSPL or custom ROM).
Any way. Mine just started doing some weird ****. Some of my zune content can't be synced successfully (meaning it syncs and when I look for it on my phone it is a black box only. Some pics and music are just black icons, no labels and not there.) I connect to zune again and it says do more with a zune pass. I have a zune pass. Any way. I reboot the phone thinking that was gonna help and when it came back up, it had done a half ass hard reset (meaning nothing was there and had to go thru the motions of setting it up again, but in settings/about only 3GB was free)
So I flashed the stock ROM again from RUU not gold card (last time I did it thru gold card) upon completion, I set it back up, sync a couple songs and pics to it and I reboot it, no problem. So I sync some more to it, no problem after reboot. so I'm thinking it's good. So I do a FULL sync and install a few apps, then reboot. all good!
Then I install a few more apps and all have a problem and say needs attention, click here. I do and retry, but failed on all of them. so I reboot the phone (knowing what was gonna happen) well, this time it sat on good bye forever, never completely shut down, so I take the battery out and put it back in and start it up and for the first time it hangs on the HTC screen. So I go into SPL mode then try to boot again, hangs still. So I go back to SPL and so factory reset and now Im setting my phone up for the 3rd time today!
Any ideas?
Click to expand...
Click to collapse
Geez, it seems that 98% of people who have the ATT Titans are having problems. I guess I must've lucked out when everything went A ok for me. I haven't been reading lately, so I am assuming you tried to debrand the device first by flashing the Euro stock rom? Did you try to upgrade the SPL to 2.6 from the HTC website?
Anyway, alright you said you flashed back to stock ROM -this is the ATT rom I'm assuming right? If so, try flashing BACK to the EURO rom. And do it through goldcard. After flashing the Euro rom...do a hard reset and see if it boots normally. Then I would try to upgrade the SPL again? to 2.6. If that doesn't work. Try to flash BACK to the ATT rom...do a hard reset and see if it works.
Wow, I must say that this is the craziest thing I've ever seen! It just reset again! This time. I was syncing an auto playlist (And I knew it was gonna be jacked up when the device summary screen had this "just removed from device (1 item)" and upon opening that up to see what was in it, it was blank!) and my wife sent me a text, I tried to unlock the screen, and it wouldn't unlock, in fact it seized the device up. The lock screen was partially slid up and stuck. So I waited with no luck.
I unplugged from PC and took battery out, then booted it back up. It took forever to boot up and was presented with setting up device for first time use (I figured). When I did and I get that same new device setup text, I noticed that there were still texts from yesterday in there and went to home screen and all my tiles from apps were still there but I when I tried to launch any of them, the screen just started to animated as if it were about to launch the app, then stopped. So couldn't launch anything.
I'm thinking that there is something with my zune setup doing this. So this time, I am booting my PC into Windows 8 and installing zune and try to sync the same content and see what happens!
Now before Mango, sometimes when I downloaded albums with zune pass on my HD7, some songs would lock up the phone. Meaning that the music would suddenly stop playing and if I hit play, skip, next or even played new playlist, it would seize the phone and force a reboot. I still have those songs on my PC and they play fine on the PC and the phone now since Mango, but zune did freak out a few months ago and created this random playlist named ".rcszasdfaskl23" some weird name starting with a ".rcs" and in that playlist were those songs that caused the phone to seize. The weird thing about this playlist is, it is in zune as content, but it is not listed in the playlist folder in windows explorer.
Any way, I'll report back after syncing with Win 8.
GreenGrenadez said:
Wow, I must say that this is the craziest thing I've ever seen! It just reset again! This time. I was syncing an auto playlist (And I knew it was gonna be jacked up when the device summary screen had this "just removed from device (1 item)" and upon opening that up to see what was in it, it was blank!) and my wife sent me a text, I tried to unlock the screen, and it wouldn't unlock, in fact it seized the device up. The lock screen was partially slid up and stuck. So I waited with no luck.
I unplugged from PC and took battery out, then booted it back up. It took forever to boot up and was presented with setting up device for first time use (I figured). When I did and I get that same new device setup text, I noticed that there were still texts from yesterday in there and went to home screen and all my tiles from apps were still there but I when I tried to launch any of them, the screen just started to animated as if it were about to launch the app, then stopped. So couldn't launch anything.
I'm thinking that there is something with my zune setup doing this. So this time, I am booting my PC into Windows 8 and installing zune and try to sync the same content and see what happens!
Now before Mango, sometimes when I downloaded albums with zune pass on my HD7, some songs would lock up the phone. Meaning that the music would suddenly stop playing and if I hit play, skip, next or even played new playlist, it would seize the phone and force a reboot. I still have those songs on my PC and they play fine on the PC and the phone now since Mango, but zune did freak out a few months ago and created this random playlist named ".rcszasdfaskl23" some weird name starting with a ".rcs" and in that playlist were those songs that caused the phone to seize. The weird thing about this playlist is, it is in zune as content, but it is not listed in the playlist folder in windows explorer.
Any way, I'll report back after syncing with Win 8.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1386926 this sounds like the problem you're having. There might be something useful on there!
Good luck!
I was just about to update this and say I think that it is a memory capacity issue! That's exactly it. Thanks eeeelliott
Sent from my PI39100 using XDA Windows Phone 7 App
xconomicron said:
Geez, it seems that 98% of people who have the ATT Titans are having problems. I guess I must've lucked out when everything went A ok for me. I haven't been reading lately, so I am assuming you tried to debrand the device first by flashing the Euro stock rom? Did you try to upgrade the SPL to 2.6 from the HTC website?
Anyway, alright you said you flashed back to stock ROM -this is the ATT rom I'm assuming right? If so, try flashing BACK to the EURO rom. And do it through goldcard. After flashing the Euro rom...do a hard reset and see if it boots normally. Then I would try to upgrade the SPL again? to 2.6. If that doesn't work. Try to flash BACK to the ATT rom...do a hard reset and see if it works.
Click to expand...
Click to collapse
Hey xconomicron,
What were your exact steps that you followed? This is the first time that I heard an ATT Titan owner installing a Euro ROM first. I ordered all of the parts to install using y-cable but I'd rather install via software only.
Never mind. found the answer I was looking for. Sry.
@xconomicron
Thanks for reply. Upon receiving my y-cable and having my gold card all ready to go with the DFT SPL (2.05) on it. It did that first (just as all the directions said to do) after success, I tried the HSPL. The PC screen said success, but the Titan said otherwise. It comes back to SPL2.5 (really 2.05 but showing 2.5), This SPL will not allow ANY other ROM other than US Cingular 1.10 to be flashed (I've tried them all Gold Card method or RUU method). I've tried the HTC SPL 2.6 and it too says success, but the phone says NOPE!
So, I'm stuck with this AT&T crapy ROM that is locked out and the only thing I can do is force update it to 8107 (which only keeps the keyboard from disappearing as far I can tell). And now only to find out that my phone also has this memory capacity problem (when I fill it beyond 70% the phone freaks out and must do a hard reset to remedy).
I know that Cotulla is working on the SPL thing (asked for testers last week) and if I can, I plan to hold out to see if a custom ROM fixes this memory problem.
Thanks
You have to install HSPL to flash custom ROMs. Its in the Windows Phone Development forum as DFT HTC Second Gen HSPL or something
Sent from my TITAN X310e using XDA Windows Phone 7 App
I realize that, but for whatever reason, mine and a few other AT&T Titans will not accept the HSPL. The SPL 2.05 will not downgrade back to 1.10 or accept HSPL or OSPL or custom ROM or EUR ROM. I've tried all by gold card and RUU.
Sent from my PI39100 using XDA Windows Phone 7 App
So you're having an issue flashing the compatible SPL with GoldCard?
There have been many problems with that. Make sure you made your GoldCard correctly and the cable configuration is correct. Y USB cables usually have one thinner wire, and usually carries only power, so it's most likely that the power will go there. Then the SD card (or flash drive) and phone go in the other two. Mine worked with the power on the thin wire, phone on the middle port that's connected to both, and the flash drive on the other end. This wasn't the configuration in the GoldCard thread, so the guide's might not work. Really, there's I think 6 possible configurations so it wouldn't hurt to try them all.
Good luck!
Sent from my TITAN X310e using XDA Windows Phone 7 App
GreenGrenadez said:
I realize that, but for whatever reason, mine and a few other AT&T Titans will not accept the HSPL. The SPL 2.05 will not downgrade back to 1.10 or accept HSPL or OSPL or custom ROM or EUR ROM. I've tried all by gold card and RUU.
Sent from my PI39100 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
I believe that this issue with AT&T Titan arises for those who directly flashed (through goldcard) DFT spl 2.05. Once the DFT spl 2.05 rom is installed there is no way of going back to stock cingular rom spl 1.10 or ability to debrand phone to euro version (even goldcard method will not work). Debranding At&t Titan to Euro rom v2.5 first before flashing the DFT spl2.05 is the best route to take, it also ensure that the phone is fully compatible with all the known custom roms, except for nhathoa rom, all are based on euro rom and radio version.
rgencarn said:
Hey xconomicron,
What were your exact steps that you followed? This is the first time that I heard an ATT Titan owner installing a Euro ROM first. I ordered all of the parts to install using y-cable but I'd rather install via software only.
Never mind. found the answer I was looking for. Sry.
Click to expand...
Click to collapse
It would be in your best bet to go and read the other threads. One in particularly...
http://forum.xda-developers.com/showthread.php?t=1693334
Basically, MOST ATT branded devices are having problems installing the DFT 2.5 SPL+HSPL. In fact, those that have tried to directly flash DFT's 2.05(2.5) SPL -without debranding the device to the EURO rom listed in the link- are usually stuck on the 2.5 SPL without being able to flash anything else at all. -Which means, no installing roms, upgrading/downgrading SPL's.
The steps I used are on that thread. Habnzrot has also listed the steps he used to successfully debrand his device and install DFT's HSPL/Custom Rom.
Follow the steps carefully...Debranding your device is your number one priority BEFORE doing anything else!
If you need any help just ask.
Okay guys. I think somebody should post a thread that explains how to install the original OSPL and stock rom to their device. Many are having issues. I have this memory capacity issue myself. I hard reset my phone at least 3 times a day.
Could anybody WHO knows how to install stock OSPL and rom post a guide for that? I would be very glad if somebody could.
I have started this thread "Install OSPL(and original rom) after installing any custom rom with HSPL." in Titan windows phone development. I hope you guys will participate in that thread.
Thanx