Related
Hey everyone,
i am so upset and lost; words cannot describe it.
So i installed WM6 black shadow and everything was working except for SMS and MMS. So i am like ok i can live with that for a day till custel' rom will come out. SO i decided to upgrade the radio to 1.43 and boom here is where the problem started, No GSM on boot up. Phone doesn't boot up. I tried install 1.40 over again, still nothing. No i tried upgrade the the rom itself, i tired custel 2.5 and nothing and i tried the new Cingular rom, still same problem. the roms flash all the way. I read the wiki, and saw the mtty.exe thing but that doesn't work for me either. I am really lost and don't know what to do.
Specs
cingular 8525
hardspl v7 cid and sim unlocked.
PLEASE HELP
4.13?? 4.10??
Where did you download these radios from??
or do you mean 1.41 or 1.43??
Yeah thats what i meant, 1.40 and 1.43 sorry. You can see how upset i am.
Thanks Again
Well, if your phone turnes on .. it's not a brick.. lol .. it IS fixable... When you turn the phone on does it go RIGHT to the 3 colored screen?
@dan5.5
You need to read the unbricking thread about this, all the info you need is there.
http://forum.xda-developers.com/showthread.php?t=286755
If you are superCID I don't see how flashing a radio could have messed up your phone.. that's weird.
mrvanx said:
@dan5.5
You need to read the unbricking thread about this, all the info you need is there.
http://forum.xda-developers.com/showthread.php?t=286755
Click to expand...
Click to collapse
I read everything there and nothing seems to be working for me. I woudnt post for nothing. i dont want to be annoying.
OK im going to repost what ive said on 4wm:
We need to check if your Radio BL is functional, firstly leave HardSPL v7 on there and connect to the bootloader via mtty (il assume you know how to do this).
Issue the following commands and tell us the results please:
1) checkimage (this shows the CRC checksums of each component...id expect the radio image to show a timeout....
2) info 2 (This will verify that your CID is intact)
3) info 8 (does a bad block check)
Once youve done this, flash SPL 1.10.oli to the device and once again connect up to mtty.
4) 'rtask a' this will enter the radio bootloader you will see "Enter Radio Bootloader" or something to that effect
from now on when you type the text does NOT appear on the mtty screen.
5) 'rversion' this should return your radio bootloader version...now unfortunatly if you see nothing...you radio BL is dead and sorry your device is royally bricked. If you get something returned back onto the screen (most probably containing the text '0108') then your radio BL is fine.
Click to expand...
Click to collapse
do as instructed in that text, post your results here.
I cant falsh spl 1.10 oli. it gives me the 260 error.
the 260 error is not connected via USB right? .. weird... have you tried taking your battery out for a couple minutes, then booting into BL mode? sounds weird but this worked for me when I didnt flash hardSPL firsl..
hey mrvanx's
I can't downgrade the hardspl to 1.10, anyhelp.
I cant active sync, the phone doesnt boot up.
Is there anyway to aviod having to respond on the phone.
hey,
i can get the phone to boot up into windows and then it freezes within a couple min. what should i do. Still no gsm message and no phone. thanks
Dan
OK, so let's try and get you to a working state - I've bricked mine a couple of times and it can be quite heart-stopping, eh?
The first thing I would do is re-download radio 1.43, just incase your current one is damaged somehow.
Secondly, download Black Shadow - I know it's not the ROM you ultimately want but the aim here is to get you working again and we can move forward from there.
First, boot up into BootLoader mode (hold down the OK button on the left side of the phone and the power button and then press the reset button on the bottom, just in case you didn't know
You should come to the three colour screen and it should be reading IPL-1.04 and SPL-2.10.Olipro. If it isn't, stop here and post what it does say.
If it everything is OK at this point, when you plug your phone into your computer, it should change to USB at the bottom. Just wait for the Found New Hardware prompts to clear on your PC and then flash the black rom - choose the hardspl option in the flash program.
Once that has finished and it is at the "tap screen to set up windows..." bit, put it back into bootloader mode as above and flash the radio.
This should hopefully give you a running phone again as I know this combination works OK as I am currently using it.
Fingers crossed, don't panic, and let us know what the results are
Cheers,
Smiffy.
Nothing is working, can some please help me. Is there anyt way i can restore the spl to the original one so i can send the phone back, i just got it like 2 weeks ago. thanks
Also i have a bad block thats what i think makes the phone freeze after i boot it up.
How can i get around this, thats seems to be the biggest problem.
Hey everyone, let me give you more info.
I can fully flash any rom and and radio,
phone will boot up like 1 out of 10 times and then freezes and thats it.
i have a bad block number 6. I have hard spl v7 installed before the phone got screwed up. I cant downgrader the spl to a lower one to check if radio stack is screwed up. Can someone please help me, if you need to ask me more info feel free.
Heh apologoies for title but im really stuck and desperate for any help!!
I have been trying to unlock my Cingular 8525 for many hours now without any luck.
I bought it off ebay knowing it was locked because I had seen these forums and knew it wasnt too harder job. I live in NZ we have a compatible 3G network here (they sell these phones branded as JasJams).
Anyway I dont have a cingular sim card, only a Vodafone NZ simcard. I dont know if that is a problem for me or not...
My problem is that I get part way through the update process and the connection between pc and phone gets cut everytime at the same place.
On my bootload screen during the setup it says
HERM100 IPL-SSPL by Des
HERM100 SPL-1.09.ds
and then
HERM100 IPL-1.01
HERM100 SPL-1.40.Olipro
Then I tick the appropriate checkboxes, I HAVE to soft reset my phone here to get it to sync up with my PC again, I dont think this should be a problem though,
It then gives me the button to select the Update button (Update the radio and bootloader)
So I click that, it gives the next screen, click next, tells you its going to take 10 minutes etc, so click next,
It then instantly disconnects the active sync connection and about a minute later I get an error screen saying the unlocker encountered communications errors.
I have been through this whole proccess 6 times now with no joy
Someone pleeeeeeeeease help me
Thanks
im willing to pay for a code all i want is a unlocked sim phone none of this radio stuff etc
try Wiki
http://wiki.xda-developers.com/
or alternatively
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27
Thanks but not really helpful, I have read the wiki through and through. I have tried that flashing HardSPL v7 and i get exactly the same problem.
PLEASE somebody help me
The only piece that is confusing is what to do once your done. The instructions say that you will be replacing your radio with a tweaked one to allow the unlock. After the entire process is done I assume you will need to have your favorite radio (1.40.3 in my case) handy to flash back onto your Hermes?
I also assume that flashing your favorite radio back to the Hermes won't lock it back again.
To be honest, I'd suggest going back to basics. You could try quite a few workarounds and end up doing this anyway..:
Reflash the original ROM your phone came with. Should be found easily via wiki.
Then you can start upgrading again.
If that's difficult, try flashing from your MicroSD card, which I've found never fails, having bricked my Hermes quite a few times now with my own cockamayme (sp) versions of ROMs that I've cobbled together from bits of code and chewing-gum.
as far as I know you dont need to CID unlock before flashing.... With olipro spl and custom RUU updater you can flash anything on your phone....
laurasaur, after you have installed 1.4 olipro, use custom RUU updater
http://forum.xda-developers.com/showthread.php?t=298737
use the RUU updater with your choice of Rom.
or if yo want to unlock the device before
http://forum.xda-developers.com/showthread.php?t=293665
amet said:
as far as I know you dont need to CID unlock before flashing.... With olipro spl and custom RUU updater you can flash anything on your phone....
laurasaur, after you have installed 1.4 olipro, use custom RUU updater
http://forum.xda-developers.com/showthread.php?t=298737
use the RUU updater with your choice of Rom.
or if yo want to unlock the device before
http://forum.xda-developers.com/showthread.php?t=293665
Click to expand...
Click to collapse
She want's to SIM-Unlock, not to CID-Unlock.
Do you use Vista? I encountered a similar problem with Windows Vista. Try a PC with Windows XP for the unlocking process.
ok my bad....
I've seen this issue with v1.4 Olipro. Upgrade bootloader to the latest Olipro 2.1 version then re-attempt.
ok thanks everyone for your advice but i am still screwed.
im not running vista.
i can not upgrade to olipro 2.1 because the upgrade utility always gets error 260 (update error) the update utility cannot connect to your PDA Phone.
I have now tried on 3 computers, my own, my parents and my work all resulting in the same thing.
I think now I will try and flash a WM6 rom onto my phone just using the olipro 1.4 and the custom RUU updater and see how I go but I dont have much hope
ok im currently updating the rom to wm6 as posted on the forums and oh my gosh i have a progress bar for the first time ever!! woot~~
um ok. now i have WM6 dopod version and fkn still sim locked someone help me before i throw my phone at the wall lol im going on holiday tomorrow and will have no phone for a week if i dont fix this in the next 3 hrs
Sim Unlock
http://forum.xda-developers.com/showthread.php?t=293665
laurasaur said:
On my bootload screen during the setup it says
HERM100 IPL-SSPL by Des
HERM100 SPL-1.09.ds
and then
HERM100 IPL-1.01
HERM100 SPL-1.40.Olipro
Then I tick the appropriate checkboxes, I HAVE to soft reset my phone here to get it to sync up with my PC again, I dont think this should be a problem though,
Click to expand...
Click to collapse
Do *NOT* soft reset your phone here, it is normal that activesync disconnects while the pda is in bootloader mode (activesync only works while OS is running). Just click "next, next, next" in the RUU and it will go fine.
woooa i think i love you Pof, I seriously do. Im not sure how I became such a noob at reading instructions but im sorry and thank you so much I now have progress bar
if you're short on time avoid any radio updates, they seem a bit hit and miss - its not worth upgrading then going away to find you've got a tossy signal!!!!
hope it worked out!
Hi guys. Mass apologies for my stupidity, but here goes...
I have now spent over 2 days on this site reading all that I can, but I am at a loss and desperate for your expertise!
I am running a UK Tmobile Vario 2. I was having problems with the phone crashing constantly and not getting any signal at all so I installed WM6 yesterday hoping this would help. Its not crashing as much, but its still not getting any signal.
After reading loads of threads and posts all over the place (I have read enough WIKI to make my eyes bleed), I think I need to update the radio version. This is the information I can gather from my phone:
Bootloader info-
Herm300
IPL-1.04
SPL-2.03
I cant figure out how to enter commands in bootloader to gather any more info I tried the mtty.exe thing with no avail. When I go to "device information" it reads like this:
ROM version: 3.60.110.4
ROM date: 09/05/07
Radio version: SAYS NOTHING!!!!
Protocol version: SAYS NOTHING!!
IMEI: SAYS NOTHING!!
When I do a soft reset I get red letters and numbers appearing and not the "no gsm" message.
This is a 2nd hand phone off of ebay as my original phone was stolen. I have contacted Tmobile, but they refuse to help me as its not the original phone that I bought.
I would be most grateful for any help you can give me!!
Thanks,
April
OK, firstly.....flash hardspl.........instructions here
Next flash ANY radio......try version 1.48.00.10.
with the device booted up and synched with Activesync, download the radio ROM, unzip and run the RUUprogram (the only exe in the zip).
select autodetect, it should highlite SPL v2.10 and tick the "HardSPL?" box.
go through each screen and accept everything......the radio will be flashed.
Hopefully your device will work properly after this.
uh oh...
Thanks so much for your speedy response. Obviously I managed to screw this up.
got to this stage
"select autodetect, it should highlite SPL v2.10 and tick the "HardSPL?" box."
It didnt autodetect, so selected SPL v2.10 and ticked "HardSPL" box manually. Went through all the other bits and when it starts to do its thing it just sits at 0% then i get error message "ERROR 262: UPDATE ERROR. The rom update utility has encountered communication errors during the update process. THe program will guide you step by step to recover from the errors so you can continue with the update."
So I followed the recovery process instructions several times. Nothing has worked. Have tried restarting my computer and doing a hard reset on phone, and stuck with the bootloader screen reading IPL 1.04 and HERM300 SPL-2.10.01Olipro.
Manage to get back to this stage
"select autodetect, it should highlite SPL v2.10 and tick the "HardSPL?" box."
and go through the ticks but always ends up with error message 262.
SORRY!
Sorry to hear about your problems.
Was it the official T-Mobile WM6 ?
If so it was another 1.50 Radio!
I have same now!
http://forum.xda-developers.com/showthread.php?t=357275
I read in another thread try putting phone in fridge for 15mins first without the battery.
Good Luck
fridge vs. floor
Yes, it was the official WM6 from T-Mobile.
Im worried now that my limited experience with flashing, cooking, and now crying will leave me with a proper "brick".
I will try the fridge thing, if I ever get it to loads WM6 again but for the mean time, I will continue to throw it on the floor.
What do you mean by it was another 1.50 radio? I dont know what version I once had, but as suggested by mrvanx, I was trying to upload the 1.48.00.01.
Again apologies for my complete ignorance, but Im sure there are others that share my stupidity and will benefit from me asking goofy questions. If anyone else has any more simpleton advice on how to revive my poor phone, I would be much obliged!
Thanks,
April
The 1.50 radio bit; If it was the official T-Mobile WM6 upgrade, then your radio will have been 1.50 (I am pretty sure)
I dont know what else to do!!??
Ok since trying to update my radio from nothing to 1.48.00.01 and receiving error message 262 during the update, my phone now only goes into bootloader mode reading the following:
HERM300
IPL-1.04
SPL-2.10.0lipro
I have tried the following to bring it back to life (but not in any particular order):
- restarted my pc several times
- made sure my Windows XP SP2 was up to date
- made sure I had .net framework up to date
- hard reset on phone
- soft reset on phone
- leaving battery out overnight
- updating SPL to 2.10.0lipro (again) doesnt get to any percentage, just straight to error 260
- updating radio to 1.48.00.01 (again) - wont autodetect. tried radio button SPL2.10, then just force safe, then just HardSPL. each option dies at 0% then error message 262)
- reinstalling TMobile version WM6 (again) - dies at 11% - error message 262
I saw the post by pof "How to unbrick your bricked hermes" and the solution was to "Flash any radio in NBH format", but I cant figure out how to do that!? (I have tried clicking on the nbh file in the downloaded radio folder, but dont know what program to use to unload all the info. Have also looked at all the links on "Radio sudden death issue knowledge consolidation" and nothing has helped.
Sorry again guys, but can someone please help
If not, does anyone want to buy my brick?
alachlan said:
Sorry again guys, but can someone please help
If not, does anyone want to buy my brick?
Click to expand...
Click to collapse
Dude - there are enough bricks around these parts to build a 500 story repair centre! All we need is MS to merge their NT, CE and ME technologies into CEMENT then we can hold all the bricks together
Error 260 (comms error) is usually caused by using Vista without "fixing" it or Win2K/XP without the .net framework on it
Error 262 is USB port not available - turning hermes off and on (or removing the battery if that fails) at that point and putting it manually into bootloader usually cures that one then continuing with the flash.
Incorrect.
Its more than likely this Vario II was irepairably bricked before the TC bought it, the Radio upgrade is failing on a Tmobile official ROM (which includes a radio) and on a standard CustomRUU upgrade for the radio only.
A "checkimage" command in mtty would probabaly return a failed radio checksum and following on from that the mtty commands to get into the radio bootloader will fail (rtask a......then rversion).
Also there may be a corrupted CID on the device which again isnt good.
Ive seen these types of bricks MANY times.
Sorry dude, looks like your Hermes was a paperweight when you bought it.
Never thought of that - shameful given the amount of radio investigating I've done recently Too busy on 260's with part flashes from people not installing .net (also the amount of hits you should be getting to your vista guide now is scary!)
Still say we should collect up all the bricks and build a repair centre
Mikeapollo said:
.....the amount of hits you should be getting to your vista guide now is scary!....
Click to expand...
Click to collapse
73039 hits according to the site
Pretty much the only fatal brick now is a damaged radio/CID flash. If there was a way for Olipro/Pof/Us to flash a hardspl type package in place of the radio bootloader then it would be solid.
What type of mortar should we use?
mrvanx said:
73039 hits according to the site
Pretty much the only fatal brick now is a damaged radio/CID flash. If there was a way for Olipro/Pof/Us to flash a hardspl type package in place of the radio bootloader then it would be solid.
Click to expand...
Click to collapse
Yup.. Must admit I think that's the one thing that will not happen anytime soon as the interactions between bootloader, radio bootloader and the radio PLA/PIC is a tad complex... It'll be a very difficult thing to test and even finding a suitable vunerability is difficult - certainly beyond my abilities presently. Though the same was said 12 months ago about the No-Wifi issue and Olipro led some excellent progress in that area...
Mind you - the key to fixing CID/radio bricks is to educate the masses not to make them in the first place and not to just blindly execute whatever they stumble across - more of a challenge than rewriting the bootloader by hand on paper tape and almost as frustrating
Oh... as for Mortar... we could have a mass scrape of all that weird dirt stuff that "grows" under the "invisible-until-you-open-it" edges of the screens and around the battery cover and add a drop of water
Wonder if it's the electronic equivelent of belly button fluff?
does that mean its dead?
Thanks for all the entertaining posts guys. Just to clarify things, Im running XP SP2, and the phone did actually work for about 3 months until suddenly one day it gradually started dropping signal, until the signal vanished completely.
Are you guys trying to tell me that my phone is completely dead then? Could I have prevented this by knowing what the hell I was doing or was it a fault of the phone?
With regards to the mortar issue I think a combination of tears and sh*t would do. I think I would build a big wall around the jackasses who release products that arent completely stable but still charge us an arm and a leg for them. (excuse my grumpiness)
Oh and just wanted to say that since my vario has been out of action, I have been relying on the trustiest brick Ive ever owned, my XDA IIs. This thing has been dropped so many times and is held together with super glue, but it does the job and gets on with things, just not very quickly.
Thanks again for all the help.
alachlan said:
Thanks for all the entertaining posts guys. Just to clarify things, Im running XP SP2, and the phone did actually work for about 3 months until suddenly one day it gradually started dropping signal, until the signal vanished completely.
Are you guys trying to tell me that my phone is completely dead then? Could I have prevented this by knowing what the hell I was doing or was it a fault of the phone?
With regards to the mortar issue I think a combination of tears and sh*t would do. I think I would build a big wall around the jackasses who release products that arent completely stable but still charge us an arm and a leg for them. (excuse my grumpiness)
Oh and just wanted to say that since my vario has been out of action, I have been relying on the trustiest brick Ive ever owned, my XDA IIs. This thing has been dropped so many times and is held together with super glue, but it does the job and gets on with things, just not very quickly.
Thanks again for all the help.
Click to expand...
Click to collapse
By the sounds of it you might have a permenant brick but unless i had your device here and actually went through everything myself i cant be sure. take a read through the sticky thread above this one about unbricking......it will take some time to read through but you will see what techniques are used to try and revive the device.
when cid corruped with spl 2.03 and not have gsm no solution can not flash with sd card when you see that level=fff only when level=0 in mtty console can use sd card for flashing rom.
THIS TIME ONLY SOLUTION TO UNBRICK HERMES WITH SPL 2.03 NO CID AND IMEI -
SENT Imei-check to fix this ??
?
uuuummm....
Thanks mbsshop1302gsm for the response, but did I mention that I have limited knowledge on this stuff? So the more basic the instructions are, the better.
Thanks,
April
Hey, my phone is an At&t 8525 and after finally fixing the white screen problem and flashing hard-spl v7 and a couple of roms I bricked the phone when flashing the last touch flo rom. During the flash the ruu wrapper stopped and indicated there was an error. I did the recovery and it supposedly completed succesfully if I can remember right. When it reboot it would not get past boot loader. And thats where I am now, the phone will not get past boot loader.
I've tried every method on these forum I could found
SD card flashing dosent work, I get the 002..... error in red.
Flashing the factory an at&t rom dosent work either, gets the same error
\
As for as I know the MTTY method dosent work, I don't know how to type in commands into bootloader and when I type in 14 0 in MTTY nothing happens
KITL is not enabled
IPL-1.04
SPL-2.03
The phone does not boot into bootloader when I hit the power button, I have to hold the comm button, power button, and soft reset in order to bring up bootloader.
When bootloader is up and the phone is connected to the computer via usb bootloader displays usb on the screen and windows detects the device as an HTC device.
Again i've spent about a week and a half trying to fix this phone and I don't know what to do anymore, i've tried more methods than listed above I can't remember though. If anyone can give me a hint on what to do I would highly appreciate it. Thanks
P.S Can someone please tell me how you type commands in bootloader or MTTY
You DON'T have Hard SPL V7 installed..... Otherwise your SPL would be 2.10.
Connect the Hermes to the pc, make sure active sync has benn disabled - got to settings, untick connect by USB. It should register on the pc. Go to bootloader then run the .nbh file for your stock rom... Make sure its the carrier rom that it was shipped with. It doesn't have to be WM05 but it DOES have to be your ORIGINAL carrier rom. Let it run through, you may gewt lucky.....
If it works, INSTALL HARD SPL V7....... Makes it so much easier to fix then...
Good luck...
Thanks for the reply, much appreciated
I tried downloading and sd card flashing a stock rom from a list of factory roms of all Hermes that I found here on xda. It gave me the same error though. I'm not exactly sure which exact rom to download from that list either. Any more help would be appreciated, thx
Wow I feel retarded, I used the wrong factory rom. After I used the right one it worked perfectly, I now have my 8525 back! Thx so much man, ur the friggin man!
Congrats bro you got it atlast. good luck & take care your baby in future. try to help others with your experience.
Glad you fixed it mate, but if I were you I'd also make sure you have Hard SPL V7 installed. It is the safety net to help when things go wrong... Never gonna be 100% safe but better odds with Hard SPL V7...
SPL - 2.10 oli
Cheers...
Ok... Rejoining the 8525 Clan
Is this Forum still alive???
Been a while guys, figured I would break out the 8525... charge it up and see what kind of things are new in this community. Unfortunately, it looks as if the radio is bricked on it. Seems like it will install ROM's that the radio is not included on. NO GSM is on the boot display, which is strange as I was using this phone until I got the Tilt about 1 1/2-2 yrs ago. I was a hardcore flasher back then... every other day it seemed, so I know it has (or had) everything it needed like the Oli 2.10 SPL... but it seems like I cannot recover this radio issue.
I am messing with the different original OEM and Carrier ROMs hoping I can get passed the 11-12% mark, and I will let you know if something changes. Any idea if un-installing SPL 2.10 Oli, and then trying to walk back through the old SPL steps could help? I am just trying to figure out another way to get around this radio issue... or basically I have a PDA, no phone Damn phone hasn't been touched in like 2 years, you think it would be just as fine as it was when I took the SIM out.
Cheers
Can u plz tell me how do you fix the white screen problem ?????
kashifmehmood said:
Can u plz tell me how do you fix the white screen problem ?????
Click to expand...
Click to collapse
Please try searching before posting.
Your answer lies within
Thread closed
Dear Members,
I tried to upgrade my JasJam with "838Pro_HK_ENG_WM6_Upgrade_20070712"
Which worked with other JasJams (Many of my friends has it working).
On upgrading, it stucked on 11% saying Error [262]
I went through recovery, and it said remove the USB cable, remove the Battry, Return it, start the phone, connect the USB, and its recovered.
After that Its again stucked in 100% and the same senario is happening.
Please tell me is there any possibility to restore my phone working.
Its stuck now, and only the (Three color screen) is on the screen.
Hard reset, soft reset is not functioning, and the phone refused to show anything except the three color screen.
I searched the forum, but found no relative article, I am searching since two days your forum and I know that no other forums can help me in this as I was always getting my help from yours.
Thanks for your time.
HERM100
IPL-1.04
HERM100
SPL-1. 40. 0lopro
If you're using XP then untick "Allow USB Connection" in activesync.
Reset to bootloader on your Hermes, Hold power, OK button above flywheel and reset with stylus.You will get the same screen you have now but it won't be a f*&%ed up version of bootloader. Connect to PC by USB and Install Hard SPL V7, found here - http://forum.xda-developers.com/showthread.php?t=296722
After this, use the sd card method to install the ROM.
1. Format a 2Gb or less sd card FAT32. ?CFopy the .nbh file of the rom you want to it and rename to hermimg.nbh .
2. Insert into phone and reset to bootloader.
3 If you did everything right then follow the prompts...
Cheers...
Again problem!
Dear ultramag69,
Thank you for your fast reply.
I did (untick) that option in the ActiveSync.
And also did reset to the device by holding the Power + Ok (under the flywheel) with Stylus reset.
After that I downloaded "Hard SPL V7" and tried to update.
First of all, in the "Hard SPL V7" there was only the last option active, and there was down a checkbox also active, but when choosing the last option, checkbox bocomes like everything else disabled.
However, I got the erro 286
I felt like the Device disconnected from USB and reconnected again (Windows gave me the sound when you remove some USB device and you re-connect it again) :-|
I don't know what to do with this dead device now !
Thank you very very much for your time and help
Don't quote me on this as I suspect you need Hard SPL V7 but, as yo've tried things out and you're about to quit anyway, Try using the sd card to update the Stock rom, the rom that came on your Hermes, or updated version. It might let you do it if the CID matches.
I don't believe SPL 1.40 allowed you to flash ANY rom but it may let you re-install the stock rom BUT it must be the original carrier software it came with. If you had Telstra rom on it when you got it, it must be a telstra rom you flash. Make sure its for the right country too as some carriers are all over the world.
Cheers...
Hello ultramag69,
Thanks alot for your reply.
Having my i-mate dead, is really interesting.
I am trying to recover it up, Mine came with (HTC) logo when booting, and I did flushed it with Dopod.
But recently, the network stopped, and I asked some experts, they said it need new OS (They ment to re-flush the ROM).
I tried with the same Dopod that was successful before, and its now stucked on 11%.
I even downloaded the Telstra but the same, it stucked on 13%.
This is my entire story, and still I am trying to get it up.
Thanks alot for your helping. nice of you.
And for all who read my post, if they had such experience before, please help.
Hello ultramag69,
Thanks alot for your reply.
Having my i-mate dead, is really interesting.
I am trying to recover it up, Mine came with (HTC) logo when booting, and I did flushed it with Dopod.
But recently, the network stopped, and I asked some experts, they said it need new OS (They ment to re-flush the ROM).
I tried with the same Dopod that was successful before, and its now stucked on 11%.
I even downloaded the Telstra but the same, it stucked on 13%.
This is my entire story, and still I am trying to get it up.
Thanks alot for your helping. nice of you.
And for all who read my post, if they had such experience before, please help.
If you can, try to find the original SHIPPED STOCK ROM. It may be your Hermes won't be recoverable as the flash stopped in the radio rom part. Most people use a cooked rom as this has the radio rom part out.
I personally use the sd card method to flash my roms so there are no sync errors or accidents with my PC. But you need Hard SPL V7 installed to get that to work with any but the shipped rom.
DON'T try flashing anything but the shipped rom or you will loose all chances of recovering your Hermes.
The only other suggestion would be to flash the SHIPPED RADIO ROM, but you need to know what radio it was before you flashed it with the dopod rom.
Unfortunately the radio rom is the Achilles heel of our phone series. Any problems during flashing of that means we pretty much end up with a brick 99% of the time. Most people are stuck and the rest seem to have limited success reflashing the radio. AVERY small percentage get it working with no trouble, but its a REALLY small amount of people.
Good luck, Make sure you flash with the SHIPPED STOCK ROM to improve your chances of success.
Cheers...
Ultramag69, Thanks alot for your consideration.
Flusching using SD card didn't success with SPL V7.
I formatted my MicroSD card, 2GB with Fat32 FS.
After that I copied the file that came with the zip archive (RUU_signed.nbh) and renamed as required: (herming.nbh).
And I put it in my i-mate, and holded the (Power + OK under flyweel) then restarted using the stylus, It showed me the tri-color screen, then it shows (Loading...) with Gray background screen (Which is normally the flusching screen) but it returned to the tri-color screen.
Any suggestions to get this SPL V7 installed successfully ?
I tried with all my (.nbh) files that I have downloaded from all sources, but its the same screen.
I think something is really wrong with me i-mate, should I take it to some Hard-ware service center ? and what can be damaged and need to be replaced in such cases ?
I am very excited in getting it working again.
Thanks alot.
Cheers...
I had bricked my Hermes a couple o' times, because of a rom I cooked half-way ( LOL ). Each time I had to flash back to the stock rom as suggested. Don't lose hope, cuz there's some people who will tell you just to accept it as bricked. You could also take the sucker apart and use jtags to flash. Most types of bricks can be solved when it comes to the Hermes. There's a thread somewhere that polled the different types of bricks, and except for radio bricks, most can be solved. If you unbrick it try 6.5 .... !!! My rom is cooked all the way now
Arwany, did you run the SSPL.exe file in the sd card instructions for Hard SPL found on page 116, post 1160 of the Hard SPL thread? You need a version of Soft SPL (SSPL) to flash using the sd card as the CID must be bypassed. The reason we Hard SPL our Hermes is because its safer. Its worthwhile flashing the SPL using unsafe SSPL (even if you use the pc you have Soft SPL installed) as its a short flash, flashing a rom (especially stock roms with the radio rom inside) is a riskier and longer flash.
Cheers...
I had the same problem.. All you have to do is establish a connection with Actisync, then run the Updater. There will be 3 colors on your Screen, sont worry, just wait 10-15 min and your should be done with the setup.
Want to help
Arwany said:
Ultramag69, Thanks alot for your consideration.
Flusching using SD card........ with the zip archive (RUU_signed.nbh) and renamed as required: (herming.nbh).
And I put it in my i-mate..........
Click to expand...
Click to collapse
Hi,Just to tell You that I've noticed a little spelling mistake.You've written "herming.nbh" But it should be "Hermimg.nbh".
Not the 1st person to make that mistake, and probably won't be the last.....
Hi All,
Yeah, that worked out for me, I could successfully flush my JasJam with that.
Thanks for your reply.
I am still facing problem when trying to flush with other OS, its always stuck on the GSM line.
I am using the SD flush method.
Any suggestions ?
THank s alot for your help!
If you have the no GSM problem the only way to, maybe, fix is to flash the original SHIPPED STOCK ROM, or the original radio rom. Flashing anything else may result in a permanent brick...
If it doesn't succeed then, sorry, its not repairable. Can be used as a PDA but not as a phone ever again.
Cheers...
Thansks Ultramag69, for all the helps, It solved my main problem.
You also Ekonkar, your comments was so helpful.
I will try to do some hardware repairing in some Mobile shop, they may get it up again !
To fix it will cost more than to get a new device... They'll tell you they can't fix it or it needs a new mainboard. Will still cost you for this nugget of info. My advice, buy a Hermes off ebay, either working or not. If its not, make sure its screen related problem cos you have the parts to fix... Unless your screen has gone bung too...
Cheers...
I gave it to the repairing guy, he replaced the GSM item and its up and running now for only 20$.
Prost :-D
Sweet, You should post where and what country so others in the same situation might be able to get their Hermes up & running.