When im in a call and the screen shuts off due to inactivity i cant get the screen back on without doing a soft reset..im using 2.5.2 rom does anyone know how to fix this
thx in advance
All I can say is wow....
^^^^ lol G - You continue to amaze me bro....
Wipe the dust off your phones rom and update to 3.0.4 and new radio...or atleast a newer stock rom
I tried useing the 3.04 rom it screwed up my phone it had no sound when dialing and it wouldnt update thru *228...and i did not want to put radio 3.35 in with all the problems i was seeing on here
IF you put 3.0.4 and didnt put 3.35 radio on then thats why you were having those problems. You have to flash radio of at least 3.35 and THEN flash 3.0.4 rom. ROM wont work properly if you have an old radio installed.
OK i can understad that but the 3.35 was removed because people where unable to flash after upgrading it to 3.35...so how do i go to 3.04 rom?
Sidewind75 said:
OK i can understad that but the 3.35 was removed because people where unable to flash after upgrading it to 3.35...so how do i go to 3.04 rom?
Click to expand...
Click to collapse
I think you are a little confused. You arent getting the right facts and believing the wrong ones. Everybody I have heard of who has problems with flashing new rom is usually a "first time flasher" and do it wrong instead of doing it the correct way. follow this link http://wiki.xda-developers.com/index.php?pagename=TITAN_GettingStarted and understand what you are doing
1st- update to 2.4 olipro (NEW BOOTLOADER"unlocker")
2nd- update sprint 3.35 rom (stop at the "tap the screen" customization screen) this gives you the radio
3rd- from customization screen start the 3.0.4 rom and flash that rom
Your phone will restart after loading and will boot into wm6.1
ok i will try that. as soon as i can find the 3.35 rom every link i go to ends up being dead
Sidewind75 said:
ok i will try that. as soon as i can find the 3.35 rom every link i go to ends up being dead
Click to expand...
Click to collapse
GO to htc.com and chose sprint and it should have it there.
Related
Hey guys..
Im having a small issue just wondering if this is normal..
I put olipro 2.4 on my phone to start the rom upgrade process.. and
i noticed that when I press the power button the phone turns off but the the power button doesnt turn it back on.. so I have to do a soft reset every time to get it back..
I did a hard reset thinking it was some program I put on the thing from before but this problem didnt go away.. when I downgraded back to the original bootloader the issue goes away.
Just wondering if the issue is known with olipro 2.4 on stock rom.. and whether it goes away upon upgrading to something like dcd 2.3.2
Thanks
It's not designed to run on a Stock ROM. It's for the 3.16 based ROM so try DCD's 2.3.x version ROM's or another of your liking.
http://forum.ppcgeeks.com/showthread.php?t=9093
That bootloader is meant to be used with the newer ROMs. It will probably have problems with just the stock ROM. Just flash a newer ROM and radio and it should go away.
Edit: Beat by less then a minute.
Ok cool thanks guys
rampagez99 have you got your direct push running to receive email etc?
nah no data plan.. Im sure its the incompatibility of bootloader with stock as they say..
Good thought though, i thought it was something that was running at first too
rampagez99 said:
nah no data plan.. Im sure its the incompatibility of bootloader with stock as they say..
Good thought though, i thought it was something that was running at first too
Click to expand...
Click to collapse
mine did that too until I went forward.
yeah i just upgraded to dcd 2.3.2 and all is well button works.. and rom is sweet. Good stuff
Got the radio upgrade 3.3x and all works well with 2.x dcd rom, but upgrading to 3.0.1 has problems with phone calls. Both receiving or outgoing, the device resets 10 sec into the call. Also Voice Command 1.6 not working. sucks.
verizon xv6800
I'd be willing to bet millions you didn't follow directions when flashing.
Nope. Cooked a kitchen, tried the Verizon Rom....neither work with 3.0.1. works great with 2.x though.
Voice Command 1.6 now working OK as well under 2.3.2. I is happy. Still looking for good GPS software. I really liked Earthcomber, but doesn't work with this rom.
If you tried to flash the radio standalone, then the verizon cooked rom...you didn't follow directions.
The ONLY way to successfully upgrade to 3.0.x is by flashing the sprint update to upgrade the radio.
OK so I cry for help. Why the heck would I apply a Sprint update to a Verizon handset, granted both CDMA. I upgraded the radio at the same time as 2.2. The 2.2 DCD rom I'm using that WORKS WELL should be no different than the upgrade to 3.0.1. Unless I'm forgetting to stop customization with a soft reset.
You're not getting the point!!!
The only reason to flash sprint's official rom is so you can update the radio to its latest version. After this is done, it DOESN'T MATTER whatever rom you flash next, such as a Verizon rom. Use DCD's 3.0.1 rom it should be working. You would have known this if you read instructions. If you flashed the radio alone first, then your settings (ESN, MSID, etc) will be wiped. You will have to re-enter these either manually or call up Verizon to do it for you. This is probably why you can't make calls.
Exactly my point. I flashed the radio with the Oli 2.4 and updated the radio from stock verizon. Then flashed 2.3.2 and all is good with the new radio. So why doesn't it work with 3.0.1? I just found my way to the In and Out Burger via Odyssey Mobile locator.
Everyone keeps telling me that i didn't follow the destructions but they don't point to where they are.
Maybe wrong radio ver?
Crap. Mine says 3.24.00. I guess that's my problem. I'm an idiot.
Please point me to the proper radio D/L.
Thanks,
Sorry for asking what is probably a simple question, but I am having the same problems. I have SPL-2.40.Olipro atm, installed the verizon ROM upgrading to 3.0.1 from NexVision's Hybrid rom. My radio is upgraded to 3.25 or whatever it was supposed to do fine. On vibrate mode, when a phone call is incoming, I get stuck in an ever ending vibrating. I can text, and attempt to cal lsomeone but nothing can be heard and no one can hear me. I know i screwed up somehow- but what exact steps do I do to remedy this?
Thank you in advance
We have to do the Sprint radio update to 3.35 first, which is an upgrade from 3.27. Then go to ROM 3.0.1.
It's always interesting to me how people jump up to say "you're doing it wrong" but don't tell you how to do it right.
Here's how to do it right.
http://forum.ppcgeeks.com/showthread.php?t=17667
Gecko122, There is more to the Sprint file than just the radio... It includes the ROM as well.... My understanding is this:
1st - Run Olipro unlocker 2.4
2nd - Run Sprint Official upgrade , NO CUSTOMIZATIONS.
3rd - Load Custom ROM.....
That has worked for me.....
PS - the DCD 2.x.x series do NOT play well with the new radio, hence the 3.0.1 kitchen.... Driver differences....
do i have to flash back to a former version of dcd or anything? or can i start from a messed up 3.0.1?
hi Penn,
Well, exactly what have you done to your phone?
Bootloader version?
ROM version?
Radio Ver?
Then we can start from there and develope a plan to help ya.
Ignore that above - I re-read you original post....
Here's what you can do and correct me if I'm wrong Penn...
You have Oli-pro 2.4 bootloader loaded
You have DCD 3.0.1 ROM loaded
You have the 3.27 Radio loaded?
If the above is true, then we have options..... Let me know
gcincotta said:
If you tried to flash the radio standalone, then the verizon cooked rom...you didn't follow directions.
The ONLY way to successfully upgrade to 3.0.x is by flashing the sprint update to upgrade the radio.
Click to expand...
Click to collapse
No, I flashed new radio stand alone package by dcd first day from an olipro 1.20 then 3.0.0 rom then 2.40 bootloader, and then one day later 3.0.1 rom... I never use sprint upgrade at all, and I have no problem about my phone at all. There is not just one way
No, I flashed new radio stand alone package by dcd first day from an olipro 1.20 then 3.0.0 rom then 2.40 bootloader, and then one day later 3.0.1 rom... I never use sprint upgrade at all, and I have no problem about my phone at all. There is not just one way
Click to expand...
Click to collapse
Correct me if I'm wrong, but weren't you the one with the extremely long, complicated post about how you were able to get everything working that way?
http://forum.xda-developers.com/showpost.php?p=2014972&postcount=326
Secondly, you may have been able to get everything working, but you're lucky. The chance of problems occurring by flashing this way is way too high in my opinion to even bother, not to mention others have had problems that absolutely cannot be fixed without reflashing back to stock and updating with the sprint update. That is why dcd removed the standalone radio from the Radio Rom thread.
Gecko, the reason why I did not "tell" you how to do it the right way is because dcd's thread has 94 pages of information on how to do it the right way. I've even posted several times on different pages in that thread with explicit instructions on how to. While I am always very eager to welcome newcomers to this community, I also strongly encourage them to read, research and educate themselves before touching their device. It doesn't mean I'm not a nice guy and don't like to help, because if you search my posts you will see that I help a lot around here. If you had simply taken 20 minutes and even skimmed dcd's thread, you would have found the answer yourself in no time.
gcincotta said:
Correct me if I'm wrong, but weren't you the one with the extremely long, complicated post about how you were able to get everything working that way?
http://forum.xda-developers.com/showpost.php?p=2014972&postcount=326
Secondly, you may have been able to get everything working, but you're lucky. The chance of problems occurring by flashing this way is way too high in my opinion to even bother, not to mention others have had problems that absolutely cannot be fixed without reflashing back to stock and updating with the sprint update. That is why dcd removed the standalone radio from the Radio Rom thread.
Click to expand...
Click to collapse
Wow... I'm sorry, I had not been keeping up with the issues of others, so until you said that just now, I had no idea. You are right, I am really lucky, so thanks for bringing it to my attention.
No problem
I'm just curious, but after flashing the newest sprint rom and radio, I noticed that everytime I do a soft reset, I automatically get the roam triangle. This stays on for about 10 minutes till it goes to EVDO, or 10X. I am currently using the newest DCD 3.2.0 Rom, for Sprint, and there is no difference. Does anyone know how to prevent this from going into Roam mode when you do a soft reset?
Hopefully this hasn't been answered, and I missed it. If it has, I appologize. Thanks in advance.
Chem
Chemdawg said:
I'm just curious, but after flashing the newest sprint rom and radio, I noticed that everytime I do a soft reset, I automatically get the roam triangle. This stays on for about 10 minutes till it goes to EVDO, or 10X. I am currently using the newest DCD 3.2.0 Rom, for Sprint, and there is no difference. Does anyone know how to prevent this from going into Roam mode when you do a soft reset?
Hopefully this hasn't been answered, and I missed it. If it has, I appologize. Thanks in advance.
Chem
Click to expand...
Click to collapse
Do you know what version of the PRL you're using? It shows up as "PRL version" under Start->Settings->System->Device Information. Someone along the line you might have ended up with an outdated one. 60613 is the latest for Sprint EVDO-capable phones.
Chemdawg said:
Does anyone know how to prevent this from going into Roam mode when you do a soft reset?
Click to expand...
Click to collapse
I can confirm that with 3.2.0 (yes...I've finally moved on from my own kitchen based from Sprint's 3.35.xxx.... ) a soft-reset consistently reverts back to Standard for the Phonerefered Serving System. Over a soft-reset it should retain the choice of Home Only.
In the registry under HKLM\Software\OEM\InitProv\PhoneSetting what can I set to retain Home Only but retain the option to switch back to Standard when travelling?
This is an issue for me since I live by the water and the US is just across a straight leaving my phone often switching between my local and a US carrier.
Keystone said:
I can confirm that with 3.2.0 (yes...I've finally moved on from my own kitchen based from Sprint's 3.35.xxx.... ) a soft-reset consistently reverts back to Standard for the Phonerefered Serving System. Over a soft-reset it should retain the choice of Home Only.
In the registry under HKLM\Software\OEM\InitProv\PhoneSetting what can I set to retain Home Only but retain the option to switch back to Standard when travelling?
This is an issue for me since I live by the water and the US is just across a straight leaving my phone often switching between my local and a US carrier.
Click to expand...
Click to collapse
we probably need the previous version initprov.dll. i will look tonight. thanks for finding this
You're welcome, DCD.. Thank you!
This afternoon I may also have a chance to build a new ROM with a familiar initprov.dll and see if that resolves it.
With 3.2.0 on my Titan I just replaced the initprov.dll (v1.25.0.0) with the v1.21.0.0 (from the March Sprint release and what I was first using in my kitchen), rebooted, but still faced the problem of the phone defaulting back to Standard rather than retain Home Only.
That was without rebuilding a ROM with the older initprov version in.
...to note, the April Alltel ROM was also using this latest v1.25.0.0.
With 3.2.0 on my Titan I just replaced the initprov.dll (v1.25.0.0) with the v1.21.0.0 (from the March Sprint release), rebooted, but still faced the problem of the phone defaulting back to Standard rather than retain Home Only.
Click to expand...
Click to collapse
Certain dll's are self registering and some aren't. It's probably going to take a little more than just a copy/paste.
gc14 said:
Certain dll's are self registering and some aren't. It's probably going to take a little more than just a copy/paste.
Click to expand...
Click to collapse
Worth a shot.. Can't rebuild until I get home......
I realize now that it is related to the radio rom. Originally I installed the NEW factory firmware/rom upgrade. Well that was when it started. So thinking it was a factory rom issue, I installed DCD 3.2.0. Still doing it. So I decided to downgrade back to 3.1.6 which was what I WAS using before the upgrade.. Still doing it. So.. .It has to be the newest radio rom. I am going to downgrade the radio back to what I had and see if that fixes it.
I realize now that it is related to the radio rom. Originally I installed the NEW factory firmware/rom upgrade. Well that was when it started. So thinking it was a factory rom issue, I installed DCD 3.2.0. Still doing it. So I decided to downgrade back to 3.1.6 which was what I WAS using before the upgrade.. Still doing it. So.. .It has to be the newest radio rom. I am going to downgrade the radio back to what I had and see if that fixes it.
Click to expand...
Click to collapse
That's not necessarily true. It could have been something that was installed during the 3.56 factory customizations. Try flashing Sprint 3.35 stock rom/radio, let the customizations run. Then flash 3.2.0 and 3.42.02 or 3.42.30. If you're going to use the 3.56 stock rom/radio to flash 3.42.02, that's ok, just DON'T let the customizations run this time.
that was the issue with mine I ran the sighned sprint cab from the extended rom from the 3.56 "official" rom that was part of no2chems pre 2.2 after i did that my phone was stuck in roaming... Thinking it was the radio i downgraded 1 step @ a time from the 3.42.03 back to 3.39 still roaming went back to the stock radio that came with the 3.35 release still roaming when phone was booted. Figured it might be rom related @ that point so i reflashed to good ole 5069k left battery out after flash for 2 min... first boot it was roaming and would not lock onto a tower in sprint only mode... my muerom boot agent always runs the sprint carrier settings 4 me and on my second boot still no sprint signal only digital roam.. In a last ditch effort I reflashed via activesync the whole 3.35 stock rom/radio ... and wala all was fixed booted right up and even b4 the sprint custimization was started i had the evdo icon and no roaming triangle. Leaving the 3.35 stock rom on there i went forward 1 step @ a time radio wise and even with 3.39 and 3.42.02 i still got sprint coverage and evdo icon and connection. so i re-flashed to the nue 2.2 preview let it do tis sprint thing on first boot. then i did not go in and eun anything from the extended rom. No more roaming triangle. Something in the 3.56 exended rom i ran (sprint sighned whatever) Changed something in epst that dod not get reset even with flashes and hard resets till i relfashed back to stock 3.35 relaease full with radio from activesync.
So my suggestion would be that u can run the newer radio and roms just be sure to let your carrier settings run but don't touch files in the extended rom esp the file mentioned bc it stuck me in roaming and it would not get a sprint signal (home) for anything even after just letting it sit. and when setting roaming option to sprint only I would not get any bars @ all just the animated dots nest to the signal icon.
So it can't be anything in the new rom or settings in the new rom that is doing it nor the radio bc when downgrading back to stock radio from march update it did the same thing.
To fix your going to need to do a fill rom/radio flash then just pick your fav flavors after its flashed and has booted up the second time.
Boy, am I glad y'all started a thread on this. I've been trying to figure out what was wrong since this came out. My first flash of the new rom caused mine to be stuck in roaming, and sometimes it won't even come out.
I'll try what you guys suggested.
Customizations = Extended Rom
That's exactly what I said.
Ok, things a little different now. I reflashed back to the stock 3.35 Rom and let customizations run.
Then flashed just the new radio 3.42.30 from SD card
Last I flashed just the dcd 3.2.0 ROM and the carrier cab, and now no more roaming after the soft reset.
So, maybe the problem is in that radio included with the new 3.56 ROM
As long as I got it working, I'm happy
Ok, things a little different now. I reflashed back to the stock 3.35 Rom and let customizations run.
Then flashed just the new radio 3.42.30 from SD card
Last I flashed just the dcd 3.2.0 ROM and the carrier cab, and now no more roaming after the soft reset.
So, maybe the problem is in that radio included with the new 3.56 ROM
As long as I got it working, I'm happy
Click to expand...
Click to collapse
Again, it's not the radio. It's in the customizations from 3.56.
gc14 said:
Again, it's not the radio. It's in the customizations from 3.56.
Click to expand...
Click to collapse
If all we had to do was not let the customizations run, why didn't someone just say that? I've been asking about this for like 3 days now.
When I tried flashing the 3.56 rom without the Customizations it still would roam, so go figure
If all we had to do was not let the customizations run, why didn't someone just say that? I've been asking about this for like 3 days now.
When I tried flashing the 3.56 rom without the Customizations it still would roam, so go figure
Click to expand...
Click to collapse
That's because you've already let them run. They don't go away after a reflash, the same way Verizon users who let them run can't just reflash their rom to make it go away. You need to flash sprint 3.35, let THOSE customizations run. Then reflash 3.2.0.
Before you do anything though, you DO have Sprint right?
Hello everyone! I have searched a lot and after about 6 flashes back to stock and retrying I can't seem to get this to work.. Please I have searched a lot and I am just frustrated now. Here is what I am doing. I unlocked with 2.40 spl, then run sprint rom. Now I don't let it customize. 3.2 rom. then telus cab. I run auto programming on phone *22803 , 1, 1 and show successful. Phone work but no data connection. called telus and re did login for data network phone#@1x.telusmobility.com and esn number. still no data. Can someone who has the latest rom working on their mogul please give me exact instructions or lend me a hand. PLEASE PLEASE. Oh if I relocka and run telus stock rom it all works fine. That is where I am now
Cheers all!!
hey man sorry my details are kinda crappy been awhile since i did it from a stock ROM but i had the same issues...maybe do a search for my posts here and look at them they might be more helpful then my memory....
anyways get your phone locked again and back to stock telus just U NEED to do this so you know you are starting fresh...then unlock and flash with the sprint ROM to get the GPS radio u are after....then re flash with the ROM of your choice if i remember correctly there is a step in 2.40-olipro that you are not doing right where it says disconnect or reconnect or something.....but every time you do it wrong go back to stock everything.......you'll get it man trust me look at my old posts i think i said what i did wrong...and follow the instructions perfectly there is one that is easy to miss if i remember correctly
found my post for u http://forum.xda-developers.com/showthread.php?t=381982
and look here too
http://www.howardforums.com/showthread.php?t=1369027
i was unlocking the phone wrong and having the same problem so make sure u careful then and remember to relock after u mess it up.....
Hey Thanks so much. It is my epst settings. When I did the sprint upload I let customization go so. going back to stock worked buy everythime I went to dcd titan upgrade something kept changing even if I did not let the sprint customization run. Well I wrote down all my setting and re flashed 7th time to 3.27 and 3.16 and changed the epst settings. It is working now to flash to 3.42.20 will hope it stays this time
jcglendenning said:
... re flashed 7th time to 3.27 and 3.16 and changed the epst settings. It is working now to flash to 3.42.20 will hope it stays this time
Click to expand...
Click to collapse
Among other possible problems, you definitely applied the wrong radio. v3.27 of the CDMA radio from February was only intended for builds off of a very early and leaked pre-release Sprint testing ROM.
Where did you get informatino to flash to that radio version?
I have a problem and was wondering if any can help me out. My hd2 is not getting past the loading screen. I have NRG rom and when I turn on the phone it gets to the NGR sign and stops. It just started doing this yesterday. I can get into the bootloader but when I tried to put a new rom on the device it just said it can not connect to the device. I don't know if my phone has brick or not because it turns on and I can get into bootloaders. Anyone with any answers.
Thank you
kasualnupe2 said:
I have a problem and was wondering if any can help me out. My hd2 is not getting past the loading screen. I have NRG rom and when I turn on the phone it gets to the NGR sign and stops. It just started doing this yesterday. I can get into the bootloader but when I tried to put a new rom on the device it just said it can not connect to the device. I don't know if my phone has brick or not because it turns on and I can get into bootloaders. Anyone with any answers.
Thank you
Click to expand...
Click to collapse
Hi
What is th version and name of the NRG rom. and did you HSPL and what radio version if you know
Russ
have you changed radio yet? regular hd2 ships with a ..51.. radio but nrg rom requires a ..50.. radio.
enter bootloader - confirm spl says x.xx.hspl and not x.xx.0000 - flash a radio.
a rom that requires a 50 radio wont get past loading screen with a 51 radio.
Quoted from Energy rom instructions
''
Q: After a reset my Phone hangs on white screen while loading.
A: This is caused by a non compatible Radio. Upgrade to a 2.xx.50.xx radio version, which also unlocks the 576MB RAM
''
If this is the correct answer, then shame on you for not reading the energy rom thread correctly before flashing.
radio is 2.15.50.14. This is not my first time running NRG rom on my phone.
OK What version are you using of NRG rom, is it the dinik, touch of glass, GTX.etc and what date did you down load? was it the last update 18dec? 29xxxx as there is a lot of problems with that versions. Infact they have been removed from the download link. I had to go back to my old version from the 13th Dec to get it back working.
So think it would be better if you flash the older version of what you are using until NRG gets the new versions fixed. (His laptop crapped out on him. As per the ROM links)
Yes, it was the touch of glass version and it was the last update 18dec. So, I tried to upload miri and dinik but it just read my computer wasn't sync to the computer. So, it maybe something wrong with the rom and my phone should be alright.
You title a topic in the HD2 section as "HTC HD2"
TheATHEiST said:
You title a topic in the HD2 section as "HTC HD2"
Click to expand...
Click to collapse
people pay $€£ for water in bottles,, there's no accounting for smarts,, hehe.
russpattaya said:
OK What version are you using of NRG rom, is it the dinik, touch of glass, GTX.etc and what date did you down load? was it the last update 18dec? 29xxxx as there is a lot of problems with that versions. Infact they have been removed from the download link. I had to go back to my old version from the 13th Dec to get it back working.
So think it would be better if you flash the older version of what you are using until NRG gets the new versions fixed. (His laptop crapped out on him. As per the ROM links)
Click to expand...
Click to collapse
So, how do I put the old on back on their. I tried loading from bootloader but my computer won't read it now. It will not connect to the pda phone. I don't know what to do. Do you know of anything else I could do.
Thanks