I have a problem and was wondering if any can help me out. My hd2 is not getting past the loading screen. I have NRG rom and when I turn on the phone it gets to the NGR sign and stops. It just started doing this yesterday. I can get into the bootloader but when I tried to put a new rom on the device it just said it can not connect to the device. I don't know if my phone has brick or not because it turns on and I can get into bootloaders. Anyone with any answers.
Thank you
kasualnupe2 said:
I have a problem and was wondering if any can help me out. My hd2 is not getting past the loading screen. I have NRG rom and when I turn on the phone it gets to the NGR sign and stops. It just started doing this yesterday. I can get into the bootloader but when I tried to put a new rom on the device it just said it can not connect to the device. I don't know if my phone has brick or not because it turns on and I can get into bootloaders. Anyone with any answers.
Thank you
Click to expand...
Click to collapse
Hi
What is th version and name of the NRG rom. and did you HSPL and what radio version if you know
Russ
have you changed radio yet? regular hd2 ships with a ..51.. radio but nrg rom requires a ..50.. radio.
enter bootloader - confirm spl says x.xx.hspl and not x.xx.0000 - flash a radio.
a rom that requires a 50 radio wont get past loading screen with a 51 radio.
Quoted from Energy rom instructions
''
Q: After a reset my Phone hangs on white screen while loading.
A: This is caused by a non compatible Radio. Upgrade to a 2.xx.50.xx radio version, which also unlocks the 576MB RAM
''
If this is the correct answer, then shame on you for not reading the energy rom thread correctly before flashing.
radio is 2.15.50.14. This is not my first time running NRG rom on my phone.
OK What version are you using of NRG rom, is it the dinik, touch of glass, GTX.etc and what date did you down load? was it the last update 18dec? 29xxxx as there is a lot of problems with that versions. Infact they have been removed from the download link. I had to go back to my old version from the 13th Dec to get it back working.
So think it would be better if you flash the older version of what you are using until NRG gets the new versions fixed. (His laptop crapped out on him. As per the ROM links)
Yes, it was the touch of glass version and it was the last update 18dec. So, I tried to upload miri and dinik but it just read my computer wasn't sync to the computer. So, it maybe something wrong with the rom and my phone should be alright.
You title a topic in the HD2 section as "HTC HD2"
TheATHEiST said:
You title a topic in the HD2 section as "HTC HD2"
Click to expand...
Click to collapse
people pay $€£ for water in bottles,, there's no accounting for smarts,, hehe.
russpattaya said:
OK What version are you using of NRG rom, is it the dinik, touch of glass, GTX.etc and what date did you down load? was it the last update 18dec? 29xxxx as there is a lot of problems with that versions. Infact they have been removed from the download link. I had to go back to my old version from the 13th Dec to get it back working.
So think it would be better if you flash the older version of what you are using until NRG gets the new versions fixed. (His laptop crapped out on him. As per the ROM links)
Click to expand...
Click to collapse
So, how do I put the old on back on their. I tried loading from bootloader but my computer won't read it now. It will not connect to the pda phone. I don't know what to do. Do you know of anything else I could do.
Thanks
Related
I'd like to know who all here have flashed the 2.06 rom and reflashed to another or downgraded back to the original because of rom instability.
If you have please post the instability issues you had and which rom you flashed to and why.
I have some instability issues but I'm trying to decide if I should try another rom and then I have to determine which rom.
X
Mods if this should be put somewhere else lock it and I'll repost in the thread you suggest.
I really liked that ROM, and I hate carrier customizations. But then XDA Live 0.1 came out and changed everything.
I had cingy rom installed but installed "Special K's" XDA-LIVE.
Still running 2.06 - waiting for a few WM6 issues to be sorted before I flash it - Slingplayer for one
URPREY said:
Still running 2.06 - waiting for a few WM6 issues to be sorted before I flash it - Slingplayer for one
Click to expand...
Click to collapse
Slingplayer and FizzTraveller are a deal breaker for me. I cannot go to any rom where those 2 items won't work.
Are you having lockups with 2.06?
I have the new Cingular ROM on my 8525 and have been running it a few weeks. I like it (and find it stable) ... check out this thread I started and am trying to maintain dealing with known issues on the new ROM and some solutions (definitely check out the registry hacks on the wiki for this).
Personally, these issues are minor annoyances to me, and I have no thoughts of downgrading to the older ROM.
weinson said:
I have no thoughts of downgrading to the older ROM.
Click to expand...
Click to collapse
second that
URPREY said:
Still running 2.06 - waiting for a few WM6 issues to be sorted before I flash it - Slingplayer for one
Click to expand...
Click to collapse
second that, also realplayer integration was nice on the Cingy 2.06
xultar said:
Slingplayer and FizzTraveller are a deal breaker for me.
Click to expand...
Click to collapse
Is that because you watch entirely too much television, or because you paid entirely too much for mobile TV?!?
Just kidding, but not really.
bricked.
I flashed my JASJAM to the latest Cingular ROM, and noticed the bizarre SD card going missing problem. I tried to flash it back to the HTC ROM from November, and the stupid phone reset itself in mid-flash. Bricked.
No matter what I did, I couldn't get it back. The phone worked fine, except for the "NO GSM" error... which means no phone functions. I even put the 1.01 bootloader on there (but then it wouldn't let me upgrade it to 1.04). It refused to write to the radio portion of the ROM. I followed every instruction on here multiple times, with no luck, tried every ROM out there, tried every command (the erase... commands, etc). MTTY just showed it hanging every time on "Entering Radio Loader".
It's in California now, hopefully they'll be able to fix it. I'm sure they're going to charge me a small fortune since it's obvious I was screwing with it (it boots up with a 1.01 bootloader, and has an HTC logo on the splash, when it should be JASJAM).
In the meantime, I'm back on my Motorola L6. Oh god. I forgot how painful GPRS is. I'm lucky to get 23kbps.
I upgraded to the 2.06 rom and had all the decribed problems identified on this forum. I kept 'losing' all the contents of my sd card (a real problem with all the tomtom maps loaded plus music and photos)...couldn't get smartdial back to full function even with some updates...and i did face 3 or 4 freezes a day with the rom. I also couldn't get xm radio to stream properly (wouldn't load windows media player to stream music). I finally reflashed back to the original Cingy rom and have everything working good again. I hope when Cingular officially releases this rom update they will have these problem addressed and fixed.
xultar said:
Slingplayer and FizzTraveller are a deal breaker for me. I cannot go to any rom where those 2 items won't work.
Are you having lockups with 2.06?
Click to expand...
Click to collapse
@xultar
FizzTraveller doesn't work on the Cing ROM? Yikes, I didn't see that mentioned anywhere. Where did you see that?
Wow. I saw none of this. I actually really liked the "AT&T" 2.06 ROM on my TyTN - even better than the 2.05 ROM which was supposed to be "vanilla". It sucks that you guys had problems...
dwcliff703 said:
I upgraded to the 2.06 rom and had all the decribed problems identified on this forum. I kept 'losing' all the contents of my sd card (a real problem with all the tomtom maps loaded plus music and photos)...couldn't get smartdial back to full function even with some updates...and i did face 3 or 4 freezes a day with the rom. I also couldn't get xm radio to stream properly (wouldn't load windows media player to stream music). I finally reflashed back to the original Cingy rom and have everything working good again. I hope when Cingular officially releases this rom update they will have these problem addressed and fixed.
Click to expand...
Click to collapse
@dwcliff: No problems flashing back to the original ROM, then? I am not SuperCID. If I give the 2.06 and want to go back, that shouldn't matter, right?
xultar said:
I'd like to know who all here have flashed the 2.06 rom and reflashed to another or downgraded back to the original because of rom instability.
Click to expand...
Click to collapse
I tried it (as well as the WWE Test ROM) and quickly reverted back to 1.35 afterwards. I could not successfully sync with two 'puters with either AKU3 version. I could sync OK with the first 'puter, then sync OK with the second 'puter, but as soon as I went to sync again with the first, ActiveSync would delete my existing partnership and ask me to create a new one, then the process would be repeated when I tried to sync with the second, ad infinitum...
John
BigBen said:
@dwcliff: No problems flashing back to the original ROM, then? I am not SuperCID. If I give the 2.06 and want to go back, that shouldn't matter, right?
Click to expand...
Click to collapse
No problems...just be sure and download the correct rom (dated 9/21/06) from the Hermes Wiki.
dwcliff703 said:
No problems...just be sure and download the correct rom (dated 9/21/06) from the Hermes Wiki.
Click to expand...
Click to collapse
Thanks for the response!
Ben
dwcliff703 said:
No problems...just be sure and download the correct rom (dated 9/21/06) from the Hermes Wiki.
Click to expand...
Click to collapse
Ummm, is that ROM date right???
Ben
richy240 said:
Is that because you watch entirely too much television, or because you paid entirely too much for mobile TV?!?
Just kidding, but not really.
Click to expand...
Click to collapse
I travel weekly. LEave Mon return on Thurs nite. I think I deserve to watch what I want instead of Faux news in airport bars. So. Sling it is. Plus I can only keep so many Star Trek TOS on my 2gb card. I can't wait till the 4 gb.
BigBen said:
@xultar
FizzTraveller doesn't work on the Cing ROM? Yikes, I didn't see that mentioned anywhere. Where did you see that?
Click to expand...
Click to collapse
It doesn't work on the WM6 rom yet. I should have been more clear. Sorry for the confusion.
xultar said:
It doesn't work on the WM6 rom yet. I should have been more clear. Sorry for the confusion.
Click to expand...
Click to collapse
OK, gotcha. I like Fizz too. Surprised that I hadn't seen anyone mention it in the WM6 Issues thread.
Thanks
Ben
Well I just attempted to upgrade my Rom.. First I loaded titan_SPL_2.40-olipro on.. It seemed to all go fine.. I can boot into the Bootloader on the phone fine and it shows that version. Then I loaded dcd 3.1.2 (Official GPS/RevA) - Windows Mobile 6.1 OS 5.2.19213. It seemed to load fine to.. went to 100% and finished phone restarted and is now stuck on the Telus screen.. Tried reloading the ROM again same thing.. Tried a different rom same thing.. I also cant establish a active sinc to my PC anymore.. Any ideas? Thanks..
I was going to try loading a factory ROM again.. I just read that people advice not to load a factory RON on this verion of SPL, correct?
Well I decided to give it a shot and load a factory ROM on again and it worked its back to life.. So my question is what should I do now, I would still like to upgrade the ROM but don't wont this to happen again.. Do I try reloading the SPL?
You are missing a step.
steps are
1. Load bootloader
2. Load Sprint or alltel OEM rom with 3.xx radio.
3. Load custom rom. If possible one with extended rom, that will erase customizations from ext rom.
here are detailed instructions for telus
http://howardforums.com/showthread.php?t=1369027
here is another 6.1 cutom rom
http://www.howardforums.com/showthread.php?t=1372511
jim_l, as mentioned you are not using the appropriate radio for your chosen ROM.
The previous post is in error because you may not mix any 3.xx radio with the latest ROMs. Avoid using radio 3.27 as that was only paired with a briefly used leaked ROMs. The compatible radios are 3.35.10, 3.37.20, and what most now seem to recommend, 3.39.10.
There are no special instructions for Telus when flashing. The highlighted Wiki and radio stickied threads at the top of this forum have all of the troubleshooting and instructional information that you required.
A hint to others, rather than first posing questions and waiting for help, it's often quickest for you to first see what existing threads and solutions are present in a forum. There's a search function and some very self explanatory labelled threads stickied to the top that occasionally get overlooked.
Thanks, I will do some more reading.. I read until my eyes bleed and thought I had it figured out. Guess not... I have been browsing forums since forums existed and know my way around... dohhhh
Thanks again..
Well I did more reading and I got it going with dcds ROM thanks all...
Only question I have now, is it seems my phone cant geta data connection.. It just doesnt dial out for it..
jim_l said:
Only question I have now, is it seems my phone cant geta data connection.. It just doesnt dial out for it..
Click to expand...
Click to collapse
Did you install one of DCD's appropriate carrier CAB?
Ya I did install it.. I just reinstalled it and all is well.. Thanks a million..
Did you also record and now check your EPST data? Is it all as it should be?
I did record all the EPST data, I couldnt get into EPST for a while.. I rebooted a couple times and now it lets me in.. seems to be all the same.. THanks..
Hey guys I am an enthusiast about Android and recently I purchased a HD2 which is great as a phone (hardware specs) but it lacks of a good software. So on my quest to make this phone the best I stumble upon this thread
http://forum.xda-developers.com/showthread.php?t=732380
and which I thought it was the greatest because it tells you how to do everything for u to run Android in your Phone. I did every single step in it I installed ChuckyGTX Rom in it, but when I run HTC Sebse Desire Build, it boots up great and it works, after about five minutes in it freezes up and stop responding.
I really don't know if I installed the right HSPL, Radio, ROM and Android, for dat matter, in my phone. So I would love if someone here can help me. Thanks before hand. I really don't know if I installed it right or not? which one is supposed to go first? The phone is working fine with Chucky Rom, except that it does not display my location weather. Also I do not have a sim card in it yet!
This are the things I installed in my phone:
HSPL3
Radio 2.12.50_2
ROM: Chucky ROM GTX (but I dont know which one, when it boots up it says GTX 2.5, I did not download it from here)
Android: HTC Sense Desire Build
This are the specs for my phone.
SPL 2.10
ROM Version 3.14
Radio 2.15.50.14
HD2 1024Leo
HTC Newbbee said:
Hey guys I am an enthusiast about Android and recently I purchased a HD2 which is great as a phone (hardware specs) but it lacks of a good software. So on my quest to make this phone the best I stumble upon this thread
http://forum.xda-developers.com/showthread.php?t=732380
and which I thought it was the greatest because it tells you how to do everything for u to run Android in your Phone. I did every single step in it I installed ChuckyGTX Rom in it, but when I run HTC Sebse Desire Build, it boots up great and it works, after about five minutes in it freezes up and stop responding.
I really don't know if I installed the right HSPL, Radio, ROM and Android, for dat matter, in my phone. So I would love if someone here can help me. Thanks before hand. I really don't know if I installed it right or not? which one is supposed to go first? The phone is working fine with Chucky Rom, except that it does not display my location weather. Also I do not have a sim card in it yet!
This are the things I installed in my phone:
HSPL3
Radio 2.12.50_2
ROM: Chucky ROM GTX (but I dont know which one, when it boots up it says GTX 2.5, I did not download it from here)
Android: HTC Sense Desire Build
This are the specs for my phone.
SPL 2.10
ROM Version 3.14
Radio 2.15.50.14
HD2 1024Leo
Click to expand...
Click to collapse
First thing I would try is to delete the android build from your SD card completely, re download it and start again to see if the problem is still there.
If it still happens then try another build and see how that runs.
Finding a build that works well for you can be a lot of trial and error.
You could always try using a newer kernel for the build your having problems with, search the android sections for info on that.
Im not sure if having a sim card will affect how it runs or not but I dont think so.
Hope that helps......
conantroutman said:
First thing I would try is to delete the android build from your SD card completely, re download it and start again to see if the problem is still there.
If it still happens then try another build and see how that runs.
Finding a build that works well for you can be a lot of trial and error
Click to expand...
Click to collapse
After every time Android froze I did uninstall it and reformat the SD card. Also I try about 4 different builds but the only one dat it goes to the system is HTC Desire Sense Build (Which I love by the way) the rest of them get stock on android logo or they never finished booting up completely.
And what other kernel you think I can use on my phone?
HTC Newbbee said:
After every time Android froze I did uninstall it and reformat the SD card. Also I try about 4 different builds but the only one dat it goes to the system is HTC Desire Sense Build (Which I love by the way) the rest of them get stock on android logo or they never finished booting up completely.
And what other kernel you think I can use on my phone?
Click to expand...
Click to collapse
Hmmm
Wouldnt worry about a kernel for the moment.
Only thing I can suggest for now is trying a different WM Rom........
Do u mean like a new OS for da phone right? Where can I get one dat u think it will work for this phone? Or I was thinking to put the phone back like it was and start all over again from scratch. But Im not even sure how to put it back to default.
Am I right in thinking that you have a "tmous" HD2? (green and red hardware keys?).....
If so you need to read through this thread for info on flashing a new rom..
Then choose a rom from here.....
or here.........
make sure its compatible with your tmous hd2..... most of them are.
You could also flash a new radio if you want. Make sure you only flash radios with a .50. in the name......
NEVER EVER go anywhere a radio with .51. in the name, these are for the other type of hd2 and will kill your phone.
Might also be worth posting your problem in the hd2 android section......
conantroutman said:
Am I right in thinking that you have a "tmous" HD2? (green and red hardware keys?).....
If so you need to read through this thread for info on flashing a new rom..
Click to expand...
Click to collapse
If u mean green and red keys to Open and Hangup buttons then yes, dat is the phone I have. Also the thread u r telling me to read is da one I used to flash my 1024Leo
ok well i would start over again from scratch.......
new rom, radio, format sd card, new build etc then see what happens......
Great news conantroutman I did what u tell me to do and I got the HTC Sense Desire Build running. Here is what I did:
Change the ROM back to Chucky GTX
Change Radio 2.12.50.2 to 2.08.50.05
But there are some issues that are I guess aggravating me the first one is that it shows all the weather for all the areas except mine and the battery drains while the phone is plugged to the computer. But besides that it did not freeze and it runs pretty smooth. Is there anything u can recommend me to do in this case. Heheheheh!!! I really want it to run as my main cellphone system.
I didnt use the desire build for very long so I'm not sure of what settings are available.........
I would look for something along the lines of "Allow charging whilst connected via usb" or something like that, tucked away somewhere in the settings menu..........
The weather issue...........
Depends what your using to get your weather info....
Sense?
Weatherbug?
Other?
Not every location is listed so it might default to the nearest listed location to where you are....... try using another gps related app and get a fix to make sure it knows where you are and see if that helps........
Theres a good chance someone else using this build will have asked this in the thread for the build so might be worth trying there........
Glad to hear you got it up and running
More News and More Help Please
Conantroutman more news man, I have installed Energy.Froyostone.HD2.Desire.Android.Aug.25 and it works great fast and smooth, I've benn running it for over 20 hours now but the only thing that dont work is the wifi or data, it just wont connect me to the internet at all. I have installed
BARE BONES WM ROM FOR ANDROID BY NRGZ28 and radio 2.08.50.05**. Is there any help u can give me with this build? I really dont wanna try another radio cause Im scared the sound wont work if I do. Thanks man, I hope u can help.
HTC Newbbee said:
Conantroutman more news man, I have installed Energy.Froyostone.HD2.Desire.Android.Aug.25 and it works great fast and smooth, I've benn running it for over 20 hours now but the only thing that dont work is the wifi or data, it just wont connect me to the internet at all. I have installed
BARE BONES WM ROM FOR ANDROID BY NRGZ28 and radio 2.08.50.05**. Is there any help u can give me with this build? I really dont wanna try another radio cause Im scared the sound wont work if I do. Thanks man, I hope u can help.
Click to expand...
Click to collapse
hey man, not really sure what to suggest as ive never had that problem....
only things I can think of are.....
new radio (above 2.08. remember only .50.radios)
try entering your apn settings manually (google them eg. t mobile us apn settings)
or try a new build.....
apart from that im not sure what to tell you sorry......
Hello,
I'm running Android(JDMS 1.6.2) on my HD2. I'm really happy about how it feels and works. There is 1 problem i really like to get fixed. My Internet is really slow.
I read something about a radio i need to change because it does't work that well with the one that's installed on my phone right now(Is this true?). I need get this radio on my hd2 using hspl2. Problem is that when i try to install hspl2 i get an error about having a wrong spl(3.something). How do i get the good SPL on my phone?
Thanks in advance
Yeah, the radio version can influence the internet connection.
Witch radio version do you have for the moment?
And about your problem about SPL/HSPL; with is your spl version from the moment?
How can i check what radio version i have?
I have spl 3.08 i think. Try to do this a week ago. Did't get it right so i gave up.
raar99 said:
How can i check what radio version i have?
I have spl 3.08 i think. Try to do this a week ago. Did't get it right so i gave up.
Click to expand...
Click to collapse
I guess you mean spl 3.03.0000 (the one who is integrated into stock ROM 3.14!)?
In case you have install/use the stock ROM 3.14 you have spl version 3.03, and radio 2.15.50.
Don't look for installing the HSPL; HSPL and spl 3.03 isn't compatible.
But to be honestly, radio 2.15.50 oz the latest one (I also use it without connection problems.)
If you would like to know (for sure) witch spl version you have you need to set your device into the bootlouder screen. Shutdown your device > Hold volume down button press > press power button. You will get a 4 color screen = Bootlouder]
But back on your connection problem; did you try a other Kernel version?
Or try a other Android build.
You're right. Just checked it in windows.
I feel really stupid everytime i ask you how to do it. But how do i change te kernel?
I tried several builds and this is the only one which has this problem. It's too bad because i really like this one. Do you know a nice build that runs smooth?
raar99 said:
You're right. Just checked it in windows.
I feel really stupid everytime i ask you how to do it. But how do i change te kernel?
I tried several builds and this is the only one which has this problem. It's too bad because i really like this one. Do you know a nice build that runs smooth?
Click to expand...
Click to collapse
Changing the kernel? Just download it and replace it with the one you have on your SD
Hmm, I don't have much experience with Android; but my favorite is this one: >> http://forum.xda-developers.com/showthread.php?t=859817
Take a look, try and if it isn't what you are looking for, take a other one.
Hello everyone, hopefully you can help me figure out what's wrong with my HD2.
.:BACKGROUND INFO:.
I bought a used TMoUS HD2 a couple months ago and it was working fine up until last month. At first, it would freeze and I would have to do a battery pull, but as time went on, it froze more and more often. One day, I think it froze around 20 times in a row. Eventually, I let the phone sit without the battery for a few minutes before I tried booting it again. When it did boot, I figured maybe there's something wrong with the software, so I did a hard reset. After the hard reset, the phone will boot into the desktop and then freeze (If I'm lucky) or sometimes it will just freeze on the T-Mobile "Stick Together" screen. I tried flashing a the stock ROM and it would always stop at 8%.
I've always used the stock ROM since I got the phone, not sure if the previous owner flashed it before, but it does have HSPL 2.08. The only thing I've done to the phone are the registry tweaks I got from these forums. Here's a list of applications I installed to my HD2:
Chainfire 3D Driver Update
Co0kie's Home Tab
appelflap HTCRamDisk
ATT WAP MEdiaNet and MMS Settings
Band Switch V2.8 Auto Disconnect Data
Battery Increment Display 1.66 ROMs
CleanRAM
ClearTemp v1.3.1
GoogleMaps
JayVee Disable Clock Flip
Long Press Send Key Alt Tab
RAMDisk Opera Cache
TCPMP v2 Video Audio Player
TX Opera Mobile 10 Flash Support
WM Long Life 0.66. 0302
Not sure if this is relevant or not, but the last thing I remember installing was Co0kie's Home Tab before the freezing started.
.:HD2 SPECS:.
OS Version: 5.2.21892 [21892.5.0.89]
Manila Version: 2.5.20121412.2
Rom Version: 2.13.531.1 [90963] WWE
Rom Date: 04.28.10
Radio Version: 2.10.50.26
Protocol Version: 15.39.50.07W
.:THINGS I'VE TRIED:.
Flashing a Custom ROM via USB will stop randomly at different percentages depending on which ROM I flash. I've tried a few different ones.
Flashing the stock ROM
(RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship) via USB always stop at 8%.
Flashing the stock ROM
(RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship) via SD card will give me an error (RADIO_V2 - RSA Fail). I've attached a picture of this error.
Since flashing the stock ROM via SD Card gives me an error (RADIO_V2 - RSA Fail), I decided to flash a new Radio (Radio_Leo_2.15.50.14), but it gives me the same error. (I've also attached a picture of this error) I haven't tried other ones because I'm not exactly sure which ones to try and I don't want to brick my phone...if it isn't already bricked yet.
Can anyone suggest some Radio that's safe for me to try flashing for my TMoUS HD2? I'm really out of ideas on what to do besides that, any suggestions would be greatly appreciated!
***EDIT 1*** (01.21.11) - Tried Task29, went all the way to 100% but the phone fails to reboot. Flashing a ROM after Task29 doesn't work Also added a picture of the bootloader screen.
***EDIT 2*** (01.21.11) - Added a list of radio and ROMs I've tried flashing in post #9.
You can flash any radio with .50. in the name.......
NEVER flash a .51. these will brick your phone.
However this doesnt sound like a radio problem. The only thing I can think to suggest is to read up on "Task 29" this will completely format your device memory and should allow you to reflash a new ROM.
Best of luck........
Thanks for your reply, Conantroutman! I just tried Task29 and it was stuck at 58% the first time, and the second time it completed all the way to 100% (With a success message from my PC) but my HD2's screen just goes black instead of rebooting. After a battery pull, I tried installing the stock ROM and the same thing still happens. It stops in the middle of updating and says there's a communication error.
Any thoughts?
Sorry, the only thing left to suggest is to try the whole process again on another PC. Also try uninstalling active sync / wmdc from your PC and trying again.
Chipped From The Bunker Via A Sandwedge
No need to be sorry I really do appreciate the help! Would upgrading/downgrading the HSPL do anything?
If it stops working using the pc then try using the sd card method.
Do a search for hd2 sd card flashing and you should find out how...
Might be more lucky without the pc in the mix, especially if there are communication errors involved...
Cheers...
ultramag69 said:
If it stops working using the pc then try using the sd card method.
Click to expand...
Click to collapse
I've actually done that as well. The flash also fails but at least it gives me an error (which I've posted a screenshot of in my first post). Not that I know what it means though Hopefully someone with more knowledge can help me decipher it.
Just a question, did you changed previously your radio? If yes to witch one?
kurt-willems said:
Just a question, did you changed previously your radio? If yes to witch one?
Click to expand...
Click to collapse
I've been reading up on how to flash stuff since I got the phone last year, but I never tried to flash anything until the beginning of this week. I'm not sure if the previous owner did though.
These are the radio I've tried this morning:
-2.10.50.26
-2.11.50.20
-2.11.50.26
-2.12.50.02.2
-2.14.50.04
-2.15.50.14
I used the SD card method to flash all the radios above. Some of the radios failed before the progress bar finished, but some actually went all the way. The phone doesn't reboot itself after it finishes though, so I have to do a battery pull. It doesn't seem to make a difference since I still can't flash any ROMs after I flash the radio.
And these are the ROMs I've tried to flash:
-CR192 Desire HD v6.5.3.0.9 Beta
-RUU Leo 1 5 TMOUS 2.10.531.1 Radio Signed 15.34.50.07U 2.08.50.08 2 Ship
-RUU Leo 1.5 TMOUS 2.13.531.1 Radio 15.39.50.07U 2.10.50.26 Signed LEO Ship
-RUU Leo 1.5 TMOUS 3.14.531.1 Radio Signed 15.42.50.11U 2.15.50.14 2 Ship
After leaving the battery out of the phone for a day, I tried Task29 again and managed to complete it (all the way to 100% and a proper restart) without freezing. So then I tried flashing a stock rom, but that stopped at around 8%. When I go into bootloader now, it seems that my HSPL has been removed and I'm reverted back to regular SPL.
If I decide to use Task29 again or flash a stock rom, do I need to install HSPL? Should I install HSPL first or just leave it alone and flash normally?
kin869 said:
After leaving the battery out of the phone for a day, I tried Task29 again and managed to complete it (all the way to 100% and a proper restart) without freezing. So then I tried flashing a stock rom, but that stopped at around 8%. When I go into bootloader now, it seems that my HSPL has been removed and I'm reverted back to regular SPL.
If I decide to use Task29 again or flash a stock rom, do I need to install HSPL? Should I install HSPL first or just leave it alone and flash normally?
Click to expand...
Click to collapse
Yes, install the right HSPL first. Then, do task 29, then you install the correct radio, lastly you can install custom rom.
Good luck
silverwind said:
Yes, install the right HSPL first. Then, do task 29, then you install the correct radio, lastly you can install custom rom.
Good luck
Click to expand...
Click to collapse
Thanks Silverwind, I'm using HSPL3 to install HSPL 2.08, but it always fails. I can install regular SPL 2.08 perfectly fine though. I'll leave the battery out for a day and try again to see if it makes any difference.