Is DCD_3.0.1_Cricket.exe now working fully with mms?
hey buddy,
im a happy cricket customer, and what u want to do is load any of the 3.3x version of radios on your phone and then u load your custom kitchen that u made from DCD's 3.04 rom.
1) so 1st u upgrade your radio if it isnt already to 1 of the 3 3.3x radios,
2) download dcd's 3.04 kitchen and make a custom rom for yourself. Dont load it up with a BUNCH of OEM's, because alot of the time 3rd party software causes issues with new roms and if u have alot of OEM's or programs installed u will have a hard time finding out what the issue is.
Now i am including a cricket customization from DCD but with a couple of files added by me which will give u the ability to use phone codes like ##778 or *228 /
I know that there is a customization for cricket in the 3.04 rom release, BUT for some reason a couple of files were left out which prevented u from being able to access ESPT.
i was able to recieve pics and lil java flashes or whatever they call them, immediately after i installed the new rom and then went to connection settings and entered my phone number and password in the login part of your data connection
http://rs301l33.rapidshare.com/files/115017910/dcd_carrier_cricket.rar
Related
I upgraded to Sprint 3.5 ROM and accidentally let the custom files run and now I get no data. Phone works but cannot connect to data.
I tried many other ROMS like dcd bell version etc. I read in some posts like http://www.htcwiki.com/thread/1439477/Data+connection+problem+after+flashing+ROM
He says to get the STOCK ROM and your previous data internal settings will load back.
Is there any other way because I can't seem to find the BELL 6800 stock ROM anywhere. link me to the file if you know it.
Also is there maybe a BELL version of IOTA?
Man my phone with no data stinks please reply....
I did the ##778# but do not know what to set that will reconnect to data. Some people say you do not need an auth key... if I do how do I get it?
I have the stock ROM that was pulled from UTStarcom's website recently.. it might help you but i wouldn't hold my breath as it was THE reason i had no data for 9 days...
Let me know if you're interested and i'll rapidshare it somewhere.
Adi
DCD_3.0.1_Bell.exe saved my day thanks dcd
Hello everyone! I have searched a lot and after about 6 flashes back to stock and retrying I can't seem to get this to work.. Please I have searched a lot and I am just frustrated now. Here is what I am doing. I unlocked with 2.40 spl, then run sprint rom. Now I don't let it customize. 3.2 rom. then telus cab. I run auto programming on phone *22803 , 1, 1 and show successful. Phone work but no data connection. called telus and re did login for data network phone#@1x.telusmobility.com and esn number. still no data. Can someone who has the latest rom working on their mogul please give me exact instructions or lend me a hand. PLEASE PLEASE. Oh if I relocka and run telus stock rom it all works fine. That is where I am now
Cheers all!!
hey man sorry my details are kinda crappy been awhile since i did it from a stock ROM but i had the same issues...maybe do a search for my posts here and look at them they might be more helpful then my memory....
anyways get your phone locked again and back to stock telus just U NEED to do this so you know you are starting fresh...then unlock and flash with the sprint ROM to get the GPS radio u are after....then re flash with the ROM of your choice if i remember correctly there is a step in 2.40-olipro that you are not doing right where it says disconnect or reconnect or something.....but every time you do it wrong go back to stock everything.......you'll get it man trust me look at my old posts i think i said what i did wrong...and follow the instructions perfectly there is one that is easy to miss if i remember correctly
found my post for u http://forum.xda-developers.com/showthread.php?t=381982
and look here too
http://www.howardforums.com/showthread.php?t=1369027
i was unlocking the phone wrong and having the same problem so make sure u careful then and remember to relock after u mess it up.....
Hey Thanks so much. It is my epst settings. When I did the sprint upload I let customization go so. going back to stock worked buy everythime I went to dcd titan upgrade something kept changing even if I did not let the sprint customization run. Well I wrote down all my setting and re flashed 7th time to 3.27 and 3.16 and changed the epst settings. It is working now to flash to 3.42.20 will hope it stays this time
jcglendenning said:
... re flashed 7th time to 3.27 and 3.16 and changed the epst settings. It is working now to flash to 3.42.20 will hope it stays this time
Click to expand...
Click to collapse
Among other possible problems, you definitely applied the wrong radio. v3.27 of the CDMA radio from February was only intended for builds off of a very early and leaked pre-release Sprint testing ROM.
Where did you get informatino to flash to that radio version?
Not to long ago i update to DCD's latest rom and radio. I never got the GPS to work for some reason though. I was wondering with the new verizon ROM out is there an easier way to get GPS. Could i flash to verizons new rom so that i have the radio and the rom and then flash back to dcds and still keep verizons radio. Becasue for some reason i just cant get the GPS to work with DCDs rom. Also i have noticed my phone lagging a TON latly and im not sure why. My contacts wont open somtimes and when i answere a call or dial out it rings but it doesnt show the phone on the screen untill about 45 seconds into the call. its been a pain coming out of sleep too and i dont think im running that much stuff on it. Any Suggestions?
(i also am getting a white spot on my screen, i have heard of this happening before. Is it a problem that gets worse and is there anything verizon can do to fix it?)
First off, if you load Verizon's latest update, you will not be able to use GPS as of yet unless you pay for VZNavigator.
If you have radio 3.42.50 and Rom 3.2.6, you should have no problem getting GPS to work.
1) Go to Settings... Phone... Services... and check the box next to 911 only. Then click ok. Exit... Soft-reset if you feel like it. Then go back and change it to Location On. Click ok... soft-reset.
2) Do the GPS - Fix found HERE
3) Download GPS Viewer... I have it attached. When you run it... hit scan.. this will find what port the GPS is on. Then select that port and hit Open Port. This will start streaming data. Go to GPS Status at the bottom... and you should see some locations popping up if you are in open air.
Let me know if you get this far.
that program you gave me doesnt work on windows mobile. thats a Computer version.
nevermindi was wrong. im just having priblems connecting to my computer. do you have a cab file?
Dmarsh508 said:
nevermindi was wrong. im just having priblems connecting to my computer. do you have a cab file?
Click to expand...
Click to collapse
Here you go.
It works!!!! Awesome! It reads the GPS port. VZ navigator still doesn't work on the xv6800. It keeps loading privacy policy and then saysits unable to getr policy setting.
But at least the GPS works now after the rom update. Thank you!
GPS won't work???
Verizon XV6800
dcd_titan_3.2.6
DCD Radio 3.42.50
SPL 240
Location set to on
(tried toggle between 911 and location on)
Ran GPSVIEW scan... found GPS on com4
set external gps program port to com4
hardware port set to none
set to automatically managed
tried reflashing rom
soft reset a million times
what else can i try?
Soon to flash...
I am probably going to finally flash a DCD rom for the first time today. It would be nice though if the images or software downloads on the GPS fix wiki were available. That's the only thing holding me back right now. GPS is the only reason to flash for me, so I want to make sure I can get it working.
GPS on VX8600 rules!
Well I finally gave in and flashed the newest DCD rom & radio. Wish I had done that a long time ago. I was having no luck with the GPS till I read this thread. The the GPS locks super fast and is VERY accurate in Google Maps. This site rules.
While I am technical, I new new to everything phone related.
I have Radio 3.37.75 and ROM 3.57.605.1
Do I need to go back and install a different Radio and Rom version to run the GPS fix and enable GPS?
Thanks!
MagnusRF said:
While I am technical, I new new to everything phone related.
I have Radio 3.37.75 and ROM 3.57.605.1
Do I need to go back and install a different Radio and Rom version to run the GPS fix and enable GPS?
Thanks!
Click to expand...
Click to collapse
You need to install a custom rom ( to replace the 3.57.605.1 VZ Rom) to enable the GPS chip on the phone. That rom has the GPS disabled. DCD 3.2.6 rom is what i'm using and it runs pretty sweet.
As far as the Radio rom goes, i dont think you have to update it. There some debates going on in the forums about wheither the new VZ radio rom is better or worse then the current radio rom that was ripped from attel. Some say its better, some say its really the same (same file size) and some say its way worse.
So in summary, to run the GPS Fix, atleast install DCD's custrom rom first. (Note: Do not let Custimization run, the rom is based off a latest sprint rom, so letting it run as a verizon users messes things up. soft reset after initial bootup after a flash and pull the battery if it starts to do it. also remember to hard reset after flashing any rom)
PS. If you flash the radio rom, you will have to do *228 again to reprogram your number back into the phone.
RiftReaper said:
You need to install a custom rom ( to replace the 3.57.605.1 VZ Rom) to enable the GPS chip on the phone. That rom has the GPS disabled. DCD 3.2.6 rom is what i'm using and it runs pretty sweet.
As far as the Radio rom goes, i dont think you have to update it. There some debates going on in the forums about wheither the new VZ radio rom is better or worse then the current radio rom that was ripped from attel. Some say its better, some say its really the same (same file size) and some say its way worse.
So in summary, to run the GPS Fix, atleast install DCD's custrom rom first. (Note: Do not let Custimization run, the rom is based off a latest sprint rom, so letting it run as a verizon users messes things up. soft reset after initial bootup after a flash and pull the battery if it starts to do it. also remember to hard reset after flashing any rom)
PS. If you flash the radio rom, you will have to do *228 again to reprogram your number back into the phone.
Click to expand...
Click to collapse
If you flash DCD 3.2.6 do let customization run, he rips out the carrier specific stuff out of the rom, so it can actually hurt not to run customization on his rom. Only stop customization run if you are flashing an original carrier specific rom that is not your current carrier, i.e. if you flash a sprint original rom on a VZ phone, etc.
While based on a Sprint rom, he has taken the time to make it safe to run on any carriers phone.
DCD's customization runs UC and I think a few other house cleaning items, so it's important for it to run.
BTC
I was trying to get flash a new rom and found out thta I needed to upgrade my radio.
I'm with bell so I upgraded to the 3.42.50 radio and I flashed with dcd's newest rom.
Now when I try to send text msgs or call it doesn't work. it goesd "beep beep beep" as if all the calls are always busy.
is it a bug? did I get the wrong radio?
what version of bootloader did you use? what method did you use to flash?
I unlocked the bootloader SPL 2.47 (2.47No2Chem Titan SPL EVT) (Recommended)
and to flash the rom, I used the usb method. I doubleclicked on dcd3.3.4.exe and let the rest go. However I don't plan on using dcd, but rather a ppckitchen rom.
the phone boots up fine, I just cant use the phone though.
Did you install the carrier cab (although non-data calls should still work fine without it I think)? Perhaps you need to call the automated programming line?
By non data calls, do you mean text messages? I cannot make any calls or send texts...
I did not install/download anything carrier cab related. I'm assuming this may be the missing link. How does this carrier cab fit in with all of this? I did not see anything relate to carrier cabs in the Titan WIKI
I followed the steps:
-updater my SPL
-then the radio
-then I used DCD3.3.4
DCD ROMs do not include carrier information, hence the carrier cabs:
http://dcd1182.n715dp.com/index.php?dir=carriers
great! I found the bell carrier cab... now how do I install it? just put it in my device and install?
can I ask another question? where can this information be found?
this information can be found all over this forum. especially in the wikis. just do a little searching and you'll find most of your answers. sometimes searching wont find you your answer, but make sure youve done your fair share of searching before you create a thread. installing the carrier cab is about as basic as you can get with flashing, so you definitely need to do some reading to get a better understanding of how it all works. its alot to read, but it's totally worth it (and pretty much necessary)
i assume to install a cab, I just have to drag it to my PPC, then start file explorer and click on it.
it installs, then I reset... and still not working
bump ------ still not working need help
like stated before did you do the initial programming. for example verizon is either *22899 send or *228 option 2. you have to do the programming everytime you flash a rom or hard reset. you will see the triangle roaming icon until you program it.
oops, forgot to say it was resolved.
The issue was that the radio I used, even stated made for bell CDMA was most like meant for another carrier. ANyway, the MSID was changed in the EPST so I had to get the password using getSPC and change my MSID back to my 10 digit phone number. reset and voila.
thanks!
First , Id like to apologize if this is posted in the wrong area. I've done quite a bit of digging and am not able to find any real information on this subject. Basically I was inquiring if it is possible, links, and or steps to dumping/copying my PRL file as well as the stock shipped rom to my PC. I know you may be wondering why? Well, because my provider is TbayTel and I've gone through a situation where a "flash dance" was needed to fix my ROM issue's I was experiancing. Upon doing this I ended up flashing my PRL to the stock shipped Sprint rom one. Sure there are many prl files available, as well as the steps to manually updating them but my provider is one of the few that a PRL file is unavailable. Called up my provider service center, they will not provide me this as they have NO IDEA what im talking about. Once I explained the situation they obtained a basic idea of what I was talking about. Great thing is they manually program this into your phone as well as every other setting. So it required me bringing the phone in and having them look at it. So I attempted to reflash a stock rom and lock my phone. No stock Tbaytel rom (Custom edited Sprint rom). So i loaded a stock sprint rom, convinced them it was there fault for shipping me that, but was unable to lock my phone. I believe this is because they orignal settings could never match unless I reloaded my actual stock Tbaytel rom and ovbioulsy they wont hand this out willingly. So with my stock Sprint rom phone with no settings (Phone was stuck in activation process), and unlocked I proceded to the customer service building. Took alot of manipulation lol, but there fixing it and having it back to me by monday. So with this said and my problem (finally ) being resolved. I would like to do this to add that material as a resource to this community. Also feel free to comment on my escavade as well as tell me if i could have done something diffrent.
P.S: Thank you to all who have or are inputing into this. (Have for the people who aided in the past with those issue's stated above.) This is a great community and I hope I can provide these files to help improve something!
Use CDMA workshop to copy your PRL and save it. Flashing your phone shouldn't involve touching your PRL though.
You should run through your registry to obtain your data settings, and mms settings if any.
Thanks
Thank you for all your input/help. Only question left is , how do i dump my stock shipped rom? As for the PRL being updated, it happened when i flashed to the stock sprint rom and hard reset. Auto updated my PRL to 60613 i beleive it was.
You dont need your stock rom. You only need your data and mms settings. You can find these in a quick registry dump.
Thank you
Thank you for your prompt responses. If that is the case , then my final question to you is. After i complete a registry dump, am i able to apply the reg file to any other rom. In doing this will it mess with the custom rom? (like there must be pre-configured settings static to the registry of the rom of choice right)?