I upgraded to Sprint 3.5 ROM and accidentally let the custom files run and now I get no data. Phone works but cannot connect to data.
I tried many other ROMS like dcd bell version etc. I read in some posts like http://www.htcwiki.com/thread/1439477/Data+connection+problem+after+flashing+ROM
He says to get the STOCK ROM and your previous data internal settings will load back.
Is there any other way because I can't seem to find the BELL 6800 stock ROM anywhere. link me to the file if you know it.
Also is there maybe a BELL version of IOTA?
Man my phone with no data stinks please reply....
I did the ##778# but do not know what to set that will reconnect to data. Some people say you do not need an auth key... if I do how do I get it?
I have the stock ROM that was pulled from UTStarcom's website recently.. it might help you but i wouldn't hold my breath as it was THE reason i had no data for 9 days...
Let me know if you're interested and i'll rapidshare it somewhere.
Adi
DCD_3.0.1_Bell.exe saved my day thanks dcd
Related
Hello everyone! I have searched a lot and after about 6 flashes back to stock and retrying I can't seem to get this to work.. Please I have searched a lot and I am just frustrated now. Here is what I am doing. I unlocked with 2.40 spl, then run sprint rom. Now I don't let it customize. 3.2 rom. then telus cab. I run auto programming on phone *22803 , 1, 1 and show successful. Phone work but no data connection. called telus and re did login for data network phone#@1x.telusmobility.com and esn number. still no data. Can someone who has the latest rom working on their mogul please give me exact instructions or lend me a hand. PLEASE PLEASE. Oh if I relocka and run telus stock rom it all works fine. That is where I am now
Cheers all!!
hey man sorry my details are kinda crappy been awhile since i did it from a stock ROM but i had the same issues...maybe do a search for my posts here and look at them they might be more helpful then my memory....
anyways get your phone locked again and back to stock telus just U NEED to do this so you know you are starting fresh...then unlock and flash with the sprint ROM to get the GPS radio u are after....then re flash with the ROM of your choice if i remember correctly there is a step in 2.40-olipro that you are not doing right where it says disconnect or reconnect or something.....but every time you do it wrong go back to stock everything.......you'll get it man trust me look at my old posts i think i said what i did wrong...and follow the instructions perfectly there is one that is easy to miss if i remember correctly
found my post for u http://forum.xda-developers.com/showthread.php?t=381982
and look here too
http://www.howardforums.com/showthread.php?t=1369027
i was unlocking the phone wrong and having the same problem so make sure u careful then and remember to relock after u mess it up.....
Hey Thanks so much. It is my epst settings. When I did the sprint upload I let customization go so. going back to stock worked buy everythime I went to dcd titan upgrade something kept changing even if I did not let the sprint customization run. Well I wrote down all my setting and re flashed 7th time to 3.27 and 3.16 and changed the epst settings. It is working now to flash to 3.42.20 will hope it stays this time
jcglendenning said:
... re flashed 7th time to 3.27 and 3.16 and changed the epst settings. It is working now to flash to 3.42.20 will hope it stays this time
Click to expand...
Click to collapse
Among other possible problems, you definitely applied the wrong radio. v3.27 of the CDMA radio from February was only intended for builds off of a very early and leaked pre-release Sprint testing ROM.
Where did you get informatino to flash to that radio version?
ever since I installed the rom, my wifi stopped catching signals completely. now I just added the data plan on my phone, and the data isnt working either. Any idea what the problem could be?
EDIT: ALSO I have a verizon phone, yet when I soft reset, Alltell shows up instead of the Verizon Logo. Maybe this has something to do with it
fix
What radio are you using?
Have you tried hard resetting and skipping the customizations? I don't see why Alltel would be displayed if you did a fresh ROM flash, as there is nothing associated with AllTel unless you installed the wrong CAB.
Best bet would be: Go to the Radio 3.40.30 thread, download the Unlocker for Olipro 1.2 and most recent Radio...flash the Unlocker, let it get into Boot Loader mode, then flash the Radio. Then it will boot up again, and flash your phone with Olipro 2.4, then flash the 3.2.3 DCD rom. Install carrier cab, and the Arcsoft one if you need it....then you're done.
The data connection may be another story...but I'd first get the ROM up and going, with the ability to make phone calls / send texts.
scotcha12345 said:
What radio are you using?
Have you tried hard resetting and skipping the customizations? I don't see why Alltel would be displayed if you did a fresh ROM flash, as there is nothing associated with AllTel unless you installed the wrong CAB.
Best bet would be: Go to the Radio 3.40.30 thread, download the Unlocker for Olipro 1.2 and most recent Radio...flash the Unlocker, let it get into Boot Loader mode, then flash the Radio. Then it will boot up again, and flash your phone with Olipro 2.4, then flash the 3.2.3 DCD rom. Install carrier cab, and the Arcsoft one if you need it....then you're done.
The data connection may be another story...but I'd first get the ROM up and going, with the ability to make phone calls / send texts.
Click to expand...
Click to collapse
Actually that's the funny part, I CAN make calls and texts. I didn't brick my phone or anything, GPS works fine too. The only problem is the WIFI and data connection - should I still go ahead and try that new rom?
problem
I would definitely suggest the whole procedure, from Radio flash and then further to the ROM reflash.
If after you've done all those things, and your WiFi is jacked, at least in my mind, the things probably broken.
Data connection could just be a matter of password being incorrect, or needing a DMU reset. See if you can do the flash to get the WiFI working first.
scotcha12345 said:
I would definitely suggest the whole procedure, from Radio flash and then further to the ROM reflash.
If after you've done all those things, and your WiFi is jacked, at least in my mind, the things probably broken.
Data connection could just be a matter of password being incorrect, or needing a DMU reset. See if you can do the flash to get the WiFI working first.
Click to expand...
Click to collapse
Do you have aim/msn or something? I updated to DCD 3.2.3 and the wifi works great now. But the data network keeps saying I have the wrong username and password. I even called up verizon for that and they dont know what the problem is. I bet it's incredible simple :/ What is a DMU reset????
Thanks a bunch in advance
EDIT: Also my phone is RIDDLED with alltel settings when it should be verizon, even AFTER all these updates!! I went into the EPST and a bunch of things had alltel. need help fast :/
inbox
check your private messages
Ok pm'ed you back! let me know if you get my email, if not i'll just post it here
I've upgraded and changed to:
NueRom v2.2
Chose Verizon, checked the EPST. Everything looked fine, but the m.IP Default Profile is still [email protected].
I was able to get an A-Key (and a password???) from the rep. The A-Key is pretty long.. does that sound about right? Anyway DATA still doesn't work. Any help is greatly appreciated, I'm trying to get this up and running as soon as possible
Hi,
I'm with Telus, and been running custom roms for a while now, without any problems... until now.
To make a long story short, I was stupid enough to let the Sprint customization run on the latest stock rom; from then on, I couldn't get any data connection from any custom rom I tried. All in all, a pretty common problem.
So, in order to fix the Sprint customization, I re-flashed the latest stock Telus rom, and that went great. Re-locked the phone, and re-flashed a custom rom (dcd 3.2.x, everytime with the Telus carrier cab of course) believing that all would be working good now. But, I still couldn't get a data connection.
I flashed back the stock rom, and tested there if I could get the connection; lo & behold, the data connection actually works with the stock rom! I've done that pattern a couple times now, and everytime I flash a custom rom, I can't get data to work, even tough it seems to work all right when using the stock rom.
I never seen references of that problem when data only works with the stock rom; any idea what I can do to repair the data connection for custom roms? Thanks a lot.
install the Telus carrier cab. thats the only reason why u dont get data. I'm with Telus as well and run the latest from DCD w/no problems. Make sure u have the latest or min. req. radio.
This has been checked and done over and over. I always install the telus cab. I tried installing it multiple times. I tried installing an older one. I tried an older radio. I tried a hard reset.
Sorry, but I really need something not as obvious as installing the carrier tab to fix the problem.
To make a long story short, I was stupid enough to let the Sprint customization run on the latest stock rom; from then on, I couldn't get any data connection from any custom rom I tried. All in all, a pretty common problem.
So, in order to fix the Sprint customization, I re-flashed the latest stock Telus rom, and that went great. Re-locked the phone, and re-flashed a custom rom (dcd 3.2.x, everytime with the Telus carrier cab of course) believing that all would be working good now. But, I still couldn't get a data connection.
Click to expand...
Click to collapse
There have been several threads and posts regarding your specific issue. Please search a little more next time, because you would have found the answer.
You will not get data working again until you get a DMU reset from your carrier. The Sprint customizations overwrote your DMU keys and they need to be reset. Flashing the stock rom refurbishes your PRI and gets the rest working fine, but for data this is the ONLY way, next to swapping your phone out for a new one.
But why does my data works with the stock rom if my DMU is wiped?! That's what I don't understand. And like I said, it's consistent; I'm on the stock rom, data works. I flash a custom rom (obviously unlocking and flashing a new radio too), install the carrier cab, data doe not work. I flash back the stock rom, data works. How come?
edit: I re-read a good bunch of the threads speaking about letting the customization for another carrier run, and not once did I see the same problem that I have; that is, that data is working with the stock rom, but not with a custom one. Would it be particular to Telus? And don't tell me I'm not installing the carrier cab when I go custom.
Agarwal said:
But why does my data works with the stock rom if my DMU is wiped?! That's what I don't understand. And like I said, it's consistent; I'm on the stock rom, data works. I flash a custom rom (obviously unlocking and flashing a new radio too), install the carrier cab, data doe not work. I flash back the stock rom, data works. How come?
edit: I re-read a good bunch of the threads speaking about letting the customization for another carrier run, and not once did I see the same problem that I have; that is, that data is working with the stock rom, but not with a custom one. Would it be particular to Telus? And don't tell me I'm not installing the carrier cab when I go custom.
Click to expand...
Click to collapse
I had the same problem as you man, except with verizon wireless. If you've followed all the steps (i.e flashed to stock, and then flashed the new radio without letting customizations run) then there's only one thing left to do which fixed my problem. Call up Telus and have someone remove your Data feature, and to put on Pay per KB/MB. It should THEN work, because the DMU is now reset. So after it's removed, give it a whirl to google.com or whatever. Hang up, and call back. Ask them to add the data plan again. Data should now work for you
Let me know if the problem persists!
I'll call Telus in the next few days and try to make my way to a DMU reset. I'll post the results once it's done.
FIXED, and WITHOUT getting my DMU reset. I simply installed that rom:
http://forum.xda-developers.com/showthread.php?t=364157
with radio 3.27, and data worked. This was the first time since the Sprint customization that I could get data working on a non-stock rom. I then proceeded to install a newer radio and the latest dcd. Works like a charm
Told you guys a DMU reset didn't make sense since data was working with the stock rom!
I have a VZW XV6800. Getting a replacement device so I decided to practice flashing a new radio/ ROM. Last night was my first time! lol and I was up until 4am trying to follow the guide. I was flashing wby USB. What seem like pretty straight forward directions had me baffled. I ended up with a updated radio and a sprint rom.
I understand the order to be
unlock
update radio
update rom
install carrier CAB
I couldn't find the compatable Radio without the Sprint ROM. So I flashed that and then Flashed dcd Titan 3.2.5 ROM and installed vzw cab. Got the phone to work but could'nt get the data to work. Also I noticed that my phone had switched to 1x instead of EV.
PLEASE help! I have my new phone and want to flash correctly this time. I also have to flash my old phone back to stock before I return it. I swear im not retarded! I only hope its easier the second time.
If you are new to this, and don't wanna brick your phone, then install these in this order...(HardSPL rom, Radio rom, Phone rom, Carrier cab)
1.Here is the HardSPL ROM:
http://www.lifesnotsogood.com/dcd1182/titan/spl/titan_SPL_2.40-olipro.exe
2. Here is the radio rom:
http://lifesnotsogood.com/dcd1182/titan/radios/Titan%20Radio%20ROM%203.42.50.rar
3. Here is the phone rom:
http://www.lifesnotsogood.com/dcd1182/titan/roms/dcd_titan_3.2.5.exe
4. Here are the carrier cabs:
http://lifesnotsogood.com/dcd1182/carriers/
Do all that, from the beginning, and you will be fine. (Also, showing 1X or EV will depend on your location)
After flashing, if you have no data you need to call verizon, tell them you hard reset your phone and data does not work. Request they reset your data services. If you get the message "Not authorized" while trying to make a call.. you need an AKey Reset.
To avoid this:
While you still have your old phone.....
1) Log into your verizon account... switch activation to your old phone.
2) Flash your new phone following the instructions already posted.
3) When you are finished, switch activation back to the new phone.
This should reset your Akey and data services so you dont need to call verizon to get them to work... As long as you have two phones, you can switch back and forth.
On my last replacement I kept the old phone for about 45 days.. was starting to wonder if I actually needed to send it back
Also when you post, put a real description of your issue in the title.. you'll get more reads and replies that way.
Thank you both! I plan on having time to flash Saturday. I will let you know how it goes. BTW are there any tips or tricks to getting a faster connection from my vzw aircard?
Once they give you an A-Key to manually type in, you will never need another one.
I have flashed my phone 100 times since I got my first A-Key, ane never had to call them back or do that activation-switch trick. My unlimited data works 100% on first boot after a rom and radio flash everytime.
ktusc said:
Thank you both! I plan on having time to flash Saturday. I will let you know how it goes. BTW are there any tips or tricks to getting a faster connection from my vzw aircard?
Click to expand...
Click to collapse
sorry, dont use a vzw aircard, just have unlimited data plan, which gets me over DSL/Cable speeds...I am fine with that.
I've flashed DCD's 3.3.4 rom to my ntelos ppc6800... I used the sprint carrier cab, but now don't have any data connection. Do I have to manually edit settings? I did record my EPST settings before flashing. Help?
EDIT: Ive reflashed to 3.2.6, sprint cab still not working for me. Is there a way I can put in the settings myself, or does somebody have a carrier CAB for ntelos? I'm seriously screwed here...
Alright, after a few trips to nTelos I finally got my internet connection working. If anyone else has this problem I'll try and explain everything I did the best I can.
After flasing a new rom i have no internet i would love to know how you got it to work
Sorry I didn't see this earlier. If you still need help could you tell me which rom you tried and send me your epst settings?