htc tytn ERROR [294] : INVALID VENDER ID
no rom installed
T-mobile
HERM300
ILP-1.01
SPL-1.11
mtty
Cmd>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: HERM100, Bootloader Version : 1.11
Built at: Mar 2 2007 17:47:36
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x6
A simple search for "Error 294" resulted in (among many others) THIS THREAD.
Give it a shot. If it doesn't work for you, again, a simple search for "Error 294" resulted in many others. If more people SEARCHED before posting questions, the search results would not be so burdensome to go through ... imagine that
Good luck,
-pvs
Related
It's a funny case, so let me explain it.
I've got a Hermes from my friend which broke the LCD screen, now I'm not able to view the status through the little baby. We all under a decision, is it worth to spent money to repair the LCD ? Both of us can't sure the electronic parts are work fine because the GSM can't on (I check it with Pocket Controller and all GSM information shown blank). So I need to make sure everything work fine before spend money to repair. I flashed the Hermes with HardSPL v7 and confirmed the info with mtty as below :
Cmd>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: HERM100, Bootloader Version : 2.10.Olipro
Built at: Apr 22 2007 13:32:26
Copyright (c) 1998-2007 Modified By Olipro - Hard-SPL
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x6
Seems it upgrade to HardSPL v7 successfully, so I tried to flash the machine but got the following result:
Dopod CHT WM6 Official NBH (I'm Chinese )
stopped at 10% and got Error 262
RUU_Hermes_QTEK_WWE_2[1].11.255.1_102_6275_1.38.00.10_108_Ship.exe
stopped at 13% and got Error 262
Any experts can advice on this case ? Many thanks !!
Hi everybody
Im new here and have no experience with my new TYTN.
So i tried upgrade on 838PRO HK_ENG_WM6- first i unlock cid & sim THEN SEE IPL 1.04 AND SPL 2.30 OLIPRO and after start flash with dopod rom.
After 15 percent tytn stopped and lost connect with sync centre - my PC running under WIN XP - so now is device totally dead and boot no go trough win mobile logo screen JAST GREEN LED DIOD -
it looks like LOSE super CID and my boootloader change and now ipl 1.04 and spl 2.03 NOW WHEN GO IN BOOTLOADER AND MTTY command:
Cmd>task 32
CID: Wait interpreter timeout
Level = FF
Cmd>info 2
HTCSF kEØ(HTCE
Cmd>
Cmd>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: HERM100, Bootloader Version : 2.03
Built at: Jun 16 2007 01:57:22
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x5
----------------------------my bootloader is changed...HELP PLEASE i try all metod more then 20rom flash ..sd card....how to fix this.
other flash by ruu is not possible by error msg - invalid vendor id and stack in 1% and sd card not work just always see not allow!!! .
if anybody got idea to fix it - please send me a post. Very thanxful.
I want to install Windows Mobile 6 Professional on my imate K-JAM. its details are mentioned as under:
Received Info Via:
Wizard Service Tool v4.2.1
Device Info:
CPU: Texas Instruments - OMAP850
MODEL: Wizard
=> Bootloaders:
IPL: 2.26.0001 (G4 device)
SPL: 2.26.0001 (G4 device)
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
ce9df3ca - 5.00M (0x4fec00)
2ea9d13a - 48.23M (0x303c000)
4fb25f92 - 50.95M (0x32f4000)
6fb25f3e - 2.94M (0x2f0000)
cfb25fb6 - 3.06M (0x30fc00)
All Done.
I have tried a lot with different ROMs but ...i just wana weep .....i dono wat the hell is happening with all this....
some times wen the installation completes and everything looks fine as with Wizard_Love_2.26.10.2_WWE_Novii_CF2 it worked fine but when i checked the version of WM it says its same as before WM5. sometimes it completes the installation with e.g Xplore_1.1 but at the time of reboot it shoes bootloader screen (try color screen). then i re-install the original WM5 ROM and get my device back in action from that BRICKED HELL.
please help me out and tell me the right path to go on...
1- is it possible to upgrade this device to WM6?
2- if yes then what are the exact files and exact method to do all that?
3- I NEED IT URGENTLY.... I MEAN THE ANSWER.?
thnx and regards,
Yawar
oh one thing more i have checked the CID lock the answer is:
SPL version is 2.26.0001
DOC chip is write-protected!!
Downgrade SPL to no higher than 1.06 and
repeat procedure.
Now Tell Me Wat to do????
http://forum.xda-developers.com/showthread.php?t=362648
Hello,
i've bought this device from somebody. There is already another rom installed.
But i like to install another one.
I've lookt already in allot of post but it's always for installing from a original rom.
Are their any special things i have to do?
I've been looking also for programs for vista. i've found some but i cant run them.
Now i've reinstalled xp. What programs do you recommend to me to instal a new rom. and what are the specifiek steps i have to pass.
Thx for the help
ipl 2.21.0001
spl 2.21.0lip
ps. my english isn't verry good
Which rom is running at present,is it official wm5 or custom build wm6 ?
download WST_4.2.2 tool and run 'Device Info' and 'CID Action' button to get the vital data of the phone and post it here.
Wizard Service Tool v4.2.2
07/09/08 09:11:43
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356384008658161
=> Bootloaders:
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
Registry AKU: .1.0.2
Radio: 02.07.1ò
Protocol: P413.1.03
=>Extended_ROM:
Version: AMP_Vanilla
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
6e9d5152 - 9.99M (0x9fd800)
6eae2902 - 43.24M (0x2b3e000)
efb26b52 - 50.13M (0x3220000)
efb26982 - 3.06M (0x310000)
efb2692e - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000170501010c1f0fb115030696
Key Index: 25
All Done.
Reading CID block...
Calculating CID block sum...
CID checksum: 77D29C2F
Decrypted stored sum: C46E0673CB3C0C58
Decrypted calcd sum: C46E0673CB3C0C58
Key index : 25 - Block index: 146
CIDkey: 2BßO©Ö
CID IMEI: 3
CID: WIZQTK01
Phone is CID LOCKED!
=> Bootloaders:
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
Grrrrrr8 !!!
Your phone is already 'HardSPL',there's no need to do any other procedure,just download any wm6 or wm6.1 latest custom built rom,hook up the phone with pc via usb cable and run the downloaded rom,it'll start to flash,let it complete 100%,the phone'll reboot and load the newer rom.
Don't ever flash any official,as your phone is HardSPL,it'll get Bricked,coz official roms contain IPL/SPL in them,ok
i got wiza200 wid stuck at startup window.i m new wid wiza i searched in this forum and found out the rom(Wizard_Love_2.26.10.2_WWE_Novii_CF2) and tried to upload, uploading started and at 96% it gave error302
as rom not in english thrfor i cant understand this error,after that my wiza wid blinking three colour screen and not conected wid pc and and now it shows just white blink on screen.
wats the problem and wats its solution.i m in trouble plz any body help.is it now complete dead r programble ?i read its info unsing wizatool
Wizard Service Tool v4.2.2
04/04/09 16:40:22
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356384004203020
=> Bootloaders:
IPL: 2.18.0001 (G4 device)
SPL: 2.18.0001 (G4 device)
Built on Feb 14 2006 at 18:47:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14847.2.0.0)
ROM: 2.18
Registry AKU: .2.0.0
Radio: 02.07.1ò
Protocol: P413.1.03
=>Extended_ROM:
Version: Unknown
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
8e9e5266 - 9.99M (0x9fd800)
8ea9d13a - 43.24M (0x2b3e000)
cfb25f96 - 50.95M (0x32f4000)
afb25f42 - 2.94M (0x2f0000)
6fb25fba - 3.06M (0x30fc00)
=> DOC chip unique ID:
000000008a0801090c1802930605067f
Key Index: 33
All Done.
i also got its bacup
WST_20090404-1642_IPL.fls
WST_20090404-1643_(auCID.fls
WST_20090404-1643_(auEXTROM.fls
WST_20090404-1643_(auGSMCAL.fls
WST_20090404-1643_(auHTC_Logo.fls
WST_20090404-1643_(auIPL.fls
WST_20090404-1643_(auOS.fls
WST_20090404-1643_(auSPL.fls
WST_20090404-1643_(auUA.fls
on wiza200
jamroz said:
i got wiza200 wid stuck at startup window.i m new wid wiza i searched in this forum and found out the rom(Wizard_Love_2.26.10.2_WWE_Novii_CF2) and tried to upload, uploading started and at 96% it gave error302
as rom not in english thrfor i cant understand this error,after that my wiza wid blinking three colour screen and not conected wid pc and and now it shows just white blink on screen.
wats the problem and wats its solution.i m in trouble plz any body help.is it now complete dead r programble ?i read its info unsing wizatool
Wizard Service Tool v4.2.2
04/04/09 16:40:22
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356384004203020
=> Bootloaders:
IPL: 2.18.0001 (G4 device)
SPL: 2.18.0001 (G4 device)
Built on Feb 14 2006 at 18:47:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14847.2.0.0)
ROM: 2.18
Registry AKU: .2.0.0
Radio: 02.07.1ò
Protocol: P413.1.03
=>Extended_ROM:
Version: Unknown
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
8e9e5266 - 9.99M (0x9fd800)
8ea9d13a - 43.24M (0x2b3e000)
cfb25f96 - 50.95M (0x32f4000)
afb25f42 - 2.94M (0x2f0000)
6fb25fba - 3.06M (0x30fc00)
=> DOC chip unique ID:
000000008a0801090c1802930605067f
Key Index: 33
All Done.
i also got its bacup
WST_20090404-1642_IPL.fls
WST_20090404-1643_(auCID.fls
WST_20090404-1643_(auEXTROM.fls
WST_20090404-1643_(auGSMCAL.fls
WST_20090404-1643_(auHTC_Logo.fls
WST_20090404-1643_(auIPL.fls
WST_20090404-1643_(auOS.fls
WST_20090404-1643_(auSPL.fls
WST_20090404-1643_(auUA.fls
Click to expand...
Click to collapse
1st Your device is not UNLOCKED, you have to unlock before apply a new ROM
2nd Perhaps the tool is the old version and thats why you couldnt flashe the new ROM. (if so, try a different version of the RUU, i think i saw one on a CRACING thread) and now i dont remember the ERROR you mentioned above.
Good luck
i tryd to unlocked it wid wiza tool but it says ur device is already unlocked.
any other help plz