Is it possible? I think my Bluetooth headset problem may be solved. I'm running dcd 3.0.4 and using the new 3.39.10 radio
after installing the new radio, my Bluetooth headset would answer calls when I push the BT headset button.
Previously, when I would push the BT button to answer calls, there would be silence on both ends. Now, the headset seems to work properly.
Not sure if/when I'll be upgrading the system ROM, but I'm definitely sticking with this new radio!
Related
TomTom comes through the speaker of my XDA2, not my BT201 Headset. I am running the 'latest' O2 ROM upgrade v1.60.50:
TomTom support informed me "2. Using a Bluetooth headset as well as the Bluetooth GPS receiver has been tested positively on this PDA. Please contact the O2 Support if your PDA does not connect to two Bluetooth devices at the same time. "
I've tried contacting O2 Support & given up after 30 minutes on TWO occasions
Any help appreciated!
I believe that this is correct but you have just misinterpreted what they have said. I think that what they mean is you can still use your BT headset for making and receiving calls while using the BT GPS receiver, this doesn’t mean the sound will go out through the BT headset, this isn’t possible.
However having said that, I don’t actually own a BT GPS receiver so I can't be 100% sure, I could be wrong and if I am I'm sure one will correct me.
I can confirm that using my Bluetooth Headset with a Holux GR230 bluetooth receiver is working fine for making and receiving calls in tomtom 3. But to get tomtom instructions throught the headset would by nice too, but I think there are still bluetooth profiles missing?? (audio profile?) I have installed Bluetooth tools.
Greez
Hi,
has anyone yet had success in connecting e.g. a BT GPS receiver and a wireless headset at the same time to the wizard? I'm currently thinking about buying a BT-Headset, but don't want to miss the GPS navigation at the same time...
Thanks, Horst
yeah I've done it a bunch of times.
it works ok with a standard bt ear set but if you try the higher quality stereo set up i had all sorts of problems. The audio would slow down as the data wasnt getting through quick enough, then when it got the data it would play it fast to catch up to where it should be.
Two bluetooth devices
I have had no problems connecting a bluetooth GPS device and a Motorola headset at the same time.
I find the devices are more reliable if the bluetooth is connected first, then the headset.
When receiving a call on the headset the GPS and TomTom continue to work BUT I lose the sound from the TomTom programme - which has never caused any problems.
Cegmawr, have you done this using a BT Stereo Headset like the HT820? or using a standar mono BT headset?
I have an HT820 and when the GPS is on, i loose the Audio, it starts skipping
Make sure devices are Bluetooth 2 not 1.1
I had a Bluetooth 2 GPS and a bluetooth 1.1 hansfree speaker - bioth kept dropping out.
I now have a bluetooth 2.0 GOS and am using a Seimend Bluetooth Car Kit - all works perfectly, as it does with Nokia nd SoneyEric bluetooth headsets... seem s to me that Bluetooth 2 is the key.
Also, TomTom automatically mutes itself if you're in a call, nothing to do with Bluetooth.
Hi!
Yesterday I went through the upgrade of the official Dutch HTC Europe WM6 release. No problems there and WM6 works a charm.
The problem came to the light when I paired my Motorola HT820 A2DP headset. The music in the Windows Media Player plays well through A2DP, but only for a few seconds. After that it starts pausing every second. The same goes for all types of audio I play (video, TCPMP, etc).
Who can help? There was no problem using WM5 and a previous WM6 ROM (unofficial and WWE).
Thanks!!
Sounds like your sampling rates are off. Check this thread for info:
http://forum.xda-developers.com/showthread.php?t=308752
Search on Priority256_fix. That seems to be the final piece of the puzzle to fix the blue tooth problem.
nrm said:
Search on Priority256_fix. That seems to be the final piece of the puzzle to fix the blue tooth problem.
Click to expand...
Click to collapse
Or search on Bluetooth Priority Fix.
Thanks for the tips.
Ofcourse there will be always another problem: my Motorola A2DP headset now fails to autoconnect (after being paired) to the X7500. Normally when I turn on the headset you will see a headphone/musictone icon in the top bar and hear the "connect sound" through the headset. This doesn't happen now. I need to soft reset first, and after that it will work again, for a few times.
Deleting the headset and pairing again works, but the autoconnecting stops working when I try again later.
Damn, what is it with the official WM6 and A2DP?
apd said:
Or search on Bluetooth Priority Fix.
Click to expand...
Click to collapse
Hi, I still experience lags and pauses while using A2DP. With the registry tweak Priority256 it even gets a lot worse!!
Any more suggestions? I tried several headsets and even the Parrot Sound speaker set, but all of them are the same. So it's not the headset.
EDIT: I figured that it has something to do with the normal Bluetooth headset I use. I want to use the A2DP stereo headset simultaneously with the normal headset for phone calls. The A2DP headset only uses "Stereo audio" when connected, while the normal headset uses "Headset". This was no problem at all with all other devices I had and no problem as well on the X7500 running WM5. With WM6 things are different I guess.
A2DP WITHOUT the normal headset connected is no problem, like it should work. WITH the voice headset connected simultaneously, the lags come up, the prioriry fix makes no difference in this matter. And I'm stubborn, I want to have the voice headset to be connected at all times, the A2DP headset when I want to listen to music.
Any thoughts?
Hi all!
I am using Michy r4.1 spl1.20 for several months already. I have been using bluetooth headset since I upgraded. Recently, I had to use regular wired headset because my bluetooth's earplugs got broken.
I just noticed that double-pressing the call/end button on my wired headset doesn't redial anymore. Nothing happens when I do that. The press-and-hold still works though. I checked \windows folder and I still see redial.exe and that exe works.
Anybody have opinions on my problem?
Ciao!
Has anyone successfully used a bluetooth headset with Microsoft Voice Command with a stock 1.66 ROM? When I press the headset button, the voice command program initiates but all audio in/out happens on the handset microphone/speaker and not the headset. I have read where the widcomm bluetooth stack is to blame. I have also heard that some custom ROMs work ok.
I have tried the MSVC patcher to 28008 on top of msvc 1.6.21725 but it has not helped.