Related
I've been playing around with my XDAIIi today and finally got music coming from my Jabra BT250.
Pressing the answer/end button on the Jabra toggles the sound to the headset and back to the XDAIIi.
At the same time I get my Tom Tom voice over the music!
The sound is not great, certainly not Hi-Fi though this, I guess, is mainly down to to the headset.
doesent work with me...
XDAIIi hardware+drivers support voice dialing over BT and playing audio. It was written in specification.
It is impossible to make these drivers work on normal XDAII or XDAIIs devices.
That's too bad for 2s user!
how did you get this to work as on my XDA2i i cant get it work, mainly the tomtom voices i am intrested in, not fussed about the music side
Thanks
John
I don't like answers like the one I'm about to give you and it's all I have.
I was on a call and ended it with my Jabra headset button. I then pressed the button again as I wasn't certain it had ended and I got the Tom Tom voice. I then played some music and that came through as well.
Now I can switch between XDA sound and Jabra sound just by toggling the headset button.
I haven't done anything with settings or patches. I got it quite by accident. If you want any info on my settings just ask but I'm sure they are all default.
The only thing that had changed between not getting it and getting it was the installation of Microsfot Voice Command, which is probably the best bit of s/w I have used. I don't know if this is a factor or not.
Thanks Mindraceing, are you useing Voice comands v1 or v1.5
Thanks
John
I'm using 1.5 UK version.
Hi,
I'm somewhat of a noob regarding Tytn/Hermes updates etc. Hopefully someone can help me with this problem.
I just bought a Jabra BT620s bluetooth headphone. Connecting works but when I play music in Windows Mediaplayer, the music sometimes stops as if it's buffering a stream.
Does anyone know if this has something to do with a bad connection or should I install some other musicplayer on my PDA? Or is it because the Jabra is just a worthless headphone?
thanks in advance
this has been noticed by several folks now. also problems such as slowing down and speeding up of the audio.
My tests have concluded that i couldnt run my bluetooth head set and bluetooth gps at the same time. on its own the headset was great.
Check you have nothing running as well as wmp also if it is an a2dp headset do a search for the way to add support somewhere on here.. sorry dont know the link.
Music skipping on me as well
I just bought the BT620 - and tried several music players - they all skip. Sometimes I can get thru an entire song and other times it skips so bad as to cal it worthless. The speed up and slow down pitch is very annoying.
Is the issue the headset or the BT stack the MDA uses.
Is there a fix/hack ?
Thanks
I just purchased the Cingular 8525 and BT620s. I can only get the headphones to work as a telephone headset. They will not work with the media player at all, the sound comes from the handset everytime. I have tried pairing them several times, but with no success. Any ideas?
CrazyBrit said:
I just purchased the Cingular 8525 and BT620s. I can only get the headphones to work as a telephone headset. They will not work with the media player at all, the sound comes from the handset everytime. I have tried pairing them several times, but with no success. Any ideas?
Click to expand...
Click to collapse
Same Problem. But my BT620s does not work with AVM Blue!Fritz, MDA3 nor with a Logitech DiNovo Desktop. I'm getting angrrrry...
Actually, I got it fixed. With the headset on, and paired, goto the communications manager (second button down on the right side of the handset) and click on settings>bluetooth settings. Then go to the Devices tab. If the heaset is paired with the 'phone you will see it in the list. Click and hold the stylus on the Jabra BT620s item and a pop-up menu will appear. Select "Set as Wireless Stereo". Majically the 620s headset will start flashing both earphones (instead of just one) and it works fine. The headset will automatically switch from phone mode to A2DP mode from that point on. It's slick. I have not encountered the buffering problem reported by others.
Good luck...
Just got my bt620s's and am having the same issue. thought that reducing the quality with fit4cat would work, but nothing seems to fix it. also, for some reason the X-button functionality of spb pocketplus is gone when listening to music with my 8525. After pairing the headphones with my G5, sound quality is worse then than that of the 8525, but I experienced no pauses or skips with the computer, however massive pauses (almost a minute) with the 8525. Tried using mortplayer and wmp. I think these are getting returned unless any of you have found a fix in the meantime. Not to mention the entire phone slows to a crawl, not good.
I too use the Jabra BT620s with the 8525. I also have buffering problems. However, the Jabra also freezes (i.e., locks) the 8525. Bottom line, the Jabra BT620s is being returned.
Hi, I just posted a new thread where I explained how I got the whole thing working http://forum.xda-developers.com/showthread.php?t=293054
Horst-Vario
Mono instead of Stereo !?!?
Mind the fix of CrazyBrit above, it made the BT 620s jump to Audio mode (both earpieces flashing). The problem with interupted streams got fixed once I shut the WLAN / WIFI function of while listening to music. Remember: WLAN and BT use the same frequency band. In a "normal" data stream interferences are a side issue, but in realtime streams - fatal.
However, even that everything seemed fine with my set, I only hear MONO audio, ie. the left and the right earpiece give exactly the same audio. Now i am stuck. Any hint for me? I got a Swisscom / Vodafone v1605 OEM of the HTC TyTN plus the BT620s. Anybody aware of a firmware update, a software fix or a tricky setting?
Thanks,
Pefis
Well guys ....
I used to have the skipping issue as well , seems to be either a a2dp hack issue , or the ROM is too slow to handle streaming and decoding siultaneously !
Not any more .......
I started using XM6 , and WOW , I can run pocket player without overclocking , and I can finally get pocketmusic to run smoothly and stream a2dp !
So give it a try , worked for me , may work for u !
I am running the bt620s with wm6, everythnig works beautifully. It also worked great with wm5, but 6 is better.
Now for me, these 2 settings made a world of difference as far as quality goes:
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/Bitpool=60
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/MaxSupportedBitpool=35 (or greater)
Hi, who has problems with his Bluetooth headset after the WM6 upgrade?
My Bluetooth headset used to start looking (by beeping) for the last connected device when I power it on. It doesn't do that while paired with my X7500 WM6. It does start looking MANUALLY when I press the call button on the headset and when it's connected (you see the headphones icon in the phone screen appear), it only stays that way for a few seconds. The headphones will disappear again and the connection has been lost.
When I then push the headset call button again, it starts looking again, connects again, and then disconnects again after a few seconds.
I first thought it was the headset, but it works just fine on all other devices I have, but just not the X7500 anymore. I'm sure it has something to do with the WM6 upgrade, because it was working the proper way while running WM5.
Any tips or suggestions??
The icon disapears, but calls still go through to it when they come in for me.
Have you checked to make sure it doesnt actualy work when an incoming call arrives? the icon is misleading.
No, the connection is lost when the icon has been disappeared, because the headset will start reconnecting/looking for the device when I press the headset call button.
If it was still connected it should initiate the voice speed dial.
strange, i have many headsets and dont have that problem with any.
I do have it randomly stop talking to the headset at all, and require a delete/repair, (one headset still wont connect, but i think its a crap headset issue). but when paired, they normaly behave afterwards.
Im on wm6 btw.
BUMP. This has been happening for me since my WM6 upgrade.
HBH-PV720
AMEO with HTC WM6
Please can anyone can help with this ?
DiGRem
Delete and pair
I have had issues with several Nokia phones when upgrading firmware. The other bluetooth units, previously paired with the phone, still thinks that they should be paired after the upgrade. Only issue is that the phone has totaly forgotten of all paired devices. This resulted in many connection errors, when the peripherals wanted to connect, but the phone refused. Can you somehow reset the headset? Delete the pairing on the phone, pair the headset with another phone/pc, and then, re-pair it with the athena again. Just to make sure that it has no old pairing info.
-Johan
Hi!
Yesterday I went through the upgrade of the official Dutch HTC Europe WM6 release. No problems there and WM6 works a charm.
The problem came to the light when I paired my Motorola HT820 A2DP headset. The music in the Windows Media Player plays well through A2DP, but only for a few seconds. After that it starts pausing every second. The same goes for all types of audio I play (video, TCPMP, etc).
Who can help? There was no problem using WM5 and a previous WM6 ROM (unofficial and WWE).
Thanks!!
Sounds like your sampling rates are off. Check this thread for info:
http://forum.xda-developers.com/showthread.php?t=308752
Search on Priority256_fix. That seems to be the final piece of the puzzle to fix the blue tooth problem.
nrm said:
Search on Priority256_fix. That seems to be the final piece of the puzzle to fix the blue tooth problem.
Click to expand...
Click to collapse
Or search on Bluetooth Priority Fix.
Thanks for the tips.
Ofcourse there will be always another problem: my Motorola A2DP headset now fails to autoconnect (after being paired) to the X7500. Normally when I turn on the headset you will see a headphone/musictone icon in the top bar and hear the "connect sound" through the headset. This doesn't happen now. I need to soft reset first, and after that it will work again, for a few times.
Deleting the headset and pairing again works, but the autoconnecting stops working when I try again later.
Damn, what is it with the official WM6 and A2DP?
apd said:
Or search on Bluetooth Priority Fix.
Click to expand...
Click to collapse
Hi, I still experience lags and pauses while using A2DP. With the registry tweak Priority256 it even gets a lot worse!!
Any more suggestions? I tried several headsets and even the Parrot Sound speaker set, but all of them are the same. So it's not the headset.
EDIT: I figured that it has something to do with the normal Bluetooth headset I use. I want to use the A2DP stereo headset simultaneously with the normal headset for phone calls. The A2DP headset only uses "Stereo audio" when connected, while the normal headset uses "Headset". This was no problem at all with all other devices I had and no problem as well on the X7500 running WM5. With WM6 things are different I guess.
A2DP WITHOUT the normal headset connected is no problem, like it should work. WITH the voice headset connected simultaneously, the lags come up, the prioriry fix makes no difference in this matter. And I'm stubborn, I want to have the voice headset to be connected at all times, the A2DP headset when I want to listen to music.
Any thoughts?
Hey everybody,
I'm trying to get Phonealarm to play nice with the Titan regarding profile switching but there is something that has me stumped.
I need the program to switch from one profile to another after I plug in my wired headset. The problem I'm having is that phoneAlarm has no way to know if the headset is plugged in or not.
Usually (at least with a bluetooth headset) a registry entry is added to HKLM/System/State/Hardware that phoneAlarm then reads to tell that the headset is already connected. The problem is, the Titan (or DCD's rom) doesn't do this.
Now, the headset obviously does something to the OS because it works and transmits audio through the headphones and not the speaker etc..
If I do a registry export with the headset connected and then disconnected, there is no difference in the two files except for signal strength. Am I out of luck here? How can it know that my headset is plugged in?
Any help would be great...thanks!
Did you ever find a solution to this?
I never did. I can't figure out how the phone knows the headset is connected when the registry never changes.