Hey everybody,
I'm trying to get Phonealarm to play nice with the Titan regarding profile switching but there is something that has me stumped.
I need the program to switch from one profile to another after I plug in my wired headset. The problem I'm having is that phoneAlarm has no way to know if the headset is plugged in or not.
Usually (at least with a bluetooth headset) a registry entry is added to HKLM/System/State/Hardware that phoneAlarm then reads to tell that the headset is already connected. The problem is, the Titan (or DCD's rom) doesn't do this.
Now, the headset obviously does something to the OS because it works and transmits audio through the headphones and not the speaker etc..
If I do a registry export with the headset connected and then disconnected, there is no difference in the two files except for signal strength. Am I out of luck here? How can it know that my headset is plugged in?
Any help would be great...thanks!
Did you ever find a solution to this?
I never did. I can't figure out how the phone knows the headset is connected when the registry never changes.
Related
Hi,
I use my iMate Startrek with a set of a2dp headphones (the iMuffs), and I have to manually tell the phone to connect to the iMuffs using a2dp through the "Set as wireless stereo" option in the settings, can this be done automatically?
Another thing is that if I get a call while listening to music, the microphone on the headset doesnt work very well, and I have to shout for the person to hear me. I think that the mic in the headset is not being used. Has anybody had this problem and solved it?
Does anyone know if there are some registry settings that need to be tweaked to get these problems solved?
Thanks a lot.
I use an itech s38 and doesn't have a problem with the mic.
I do have problems with automatic connections.
after setting up properly, if the headset gets disconnected,
the next time it reconnects by itself is always on the headset profile
and mostly only connects if i make a call
So even when no indicator is shown I would assume that seconds
before ther call is answered the sound would be transfered to the headset
that's not so much of a problem
what really sickens me is that if i wanted to
listen to music via the headset when headset profile is connected
i would have to
1.hit the stick once to go to comm manager
2.hit "2" to turn off BT
3.exit to make sure action is done
4.hit center to go to comm manager again
5.hit "2" turn it on (making sure it doesn'ty connects to headset profile first)
6.hit Settings to go to BT settings (hit one or enter to getto that's two presses)
4.hit menu
5.hit devices
6.hit menu
7.hit set as wireless stereo
8.hit done
9.hit done again
10.hit exit
11.hit start
12.hit windows media
13.mess another big while in windows media playlists
..........
now that's too much ... many places i could use the home button
to exit quickly .. that's not what's frustating
what i need actually is a shortcut to the BT devices page
and a smarter profile to connect to wireless stereo for me
without having to turn off headset profile first
I am using HP Stereo Bluetooth headset with my QTEK 8500. It works fine besides the reconnection. If I turn the headset off in order to reconnect I have to go to the BT settings and set the headset to Stereo Headset again. I beleive your problem ocurs because your headset is also a handsfree headset, which HP is not.
I do beleive this behaviour is by design. Although I do not seen to understand the logic behind it.
I bought this headset and so far its been good for the price. It was like 25 shipped on ebay. Only gripe is that it can only do volume on the headset, no back/forward.
It works and sounds fine on my 8125, however I do hear slight crackling throughout songs. Im sure i could help it with some tweaking.
But my real problem is that it doesnt seem to work with my dongle. So im calling out anyone who has a pc850 and a stereo headset. What do you use to connect through bluetooth, "Audio Gateway" or "Audio Headset". My jensens only allow me to use audio headset. When I connect I start to hear static on the jensens but thats it, no audio is passed, even though the status shows good signal. 0 bytes are transfered and received.
However, when I connect in headset mode, I do get the prompt that a high quality audio connection has been found, and the message "the next time an audio player is opened, audio output will be sent to bluetooth. So its quite confusing. First I dont know which connection to use, then I can only use one, 'audio headset'. then it seems it works, then I get no output.
Looking at a review of the ht820, i think the reviewer used Audio Gateway, which is why im asking.
to test i have been using windows media player 11 and some mp3s, wavs, avis. also are you suppose to hear audio through your speakers once the headset is connected? because I do and i thought that was odd.
Just to throw this out there too, one, and i mean ONE time i tried to connect, It was actually sending information, but it was the ring you get when someone is calling on the headset. also I could see info being transfered from pc to headset through the status page.
Also to note the dongle works fine with activesync and the 8125. which is great because it would be useless at this point if that didnt work.
How did you get it to pair with the 8125?
So the issue I have, ..
I can pair the two devices, and in bluetooth settings, I can find the wbt212, set up as a hands free device, .. when I go to make a call, it doesn't auto-connect to the headset, and the "turn on hands free" is grayed out. The headset never stops blinking the fast 3 blinks.
Was there something special you had to do?
BEST solution to Jensen WBT212 headset transmition
BEST solution to Jensen WBT212 headset transmition
get it - AND - the Blue touth Transmitter, for 20 bux
02-Feb-2010:
http://www.futureshop.ca/catalog/pr...ngid=EN&sku_id=0665000FS10074523&catid=10037#
Hi, who has problems with his Bluetooth headset after the WM6 upgrade?
My Bluetooth headset used to start looking (by beeping) for the last connected device when I power it on. It doesn't do that while paired with my X7500 WM6. It does start looking MANUALLY when I press the call button on the headset and when it's connected (you see the headphones icon in the phone screen appear), it only stays that way for a few seconds. The headphones will disappear again and the connection has been lost.
When I then push the headset call button again, it starts looking again, connects again, and then disconnects again after a few seconds.
I first thought it was the headset, but it works just fine on all other devices I have, but just not the X7500 anymore. I'm sure it has something to do with the WM6 upgrade, because it was working the proper way while running WM5.
Any tips or suggestions??
The icon disapears, but calls still go through to it when they come in for me.
Have you checked to make sure it doesnt actualy work when an incoming call arrives? the icon is misleading.
No, the connection is lost when the icon has been disappeared, because the headset will start reconnecting/looking for the device when I press the headset call button.
If it was still connected it should initiate the voice speed dial.
strange, i have many headsets and dont have that problem with any.
I do have it randomly stop talking to the headset at all, and require a delete/repair, (one headset still wont connect, but i think its a crap headset issue). but when paired, they normaly behave afterwards.
Im on wm6 btw.
BUMP. This has been happening for me since my WM6 upgrade.
HBH-PV720
AMEO with HTC WM6
Please can anyone can help with this ?
DiGRem
Delete and pair
I have had issues with several Nokia phones when upgrading firmware. The other bluetooth units, previously paired with the phone, still thinks that they should be paired after the upgrade. Only issue is that the phone has totaly forgotten of all paired devices. This resulted in many connection errors, when the peripherals wanted to connect, but the phone refused. Can you somehow reset the headset? Delete the pairing on the phone, pair the headset with another phone/pc, and then, re-pair it with the athena again. Just to make sure that it has no old pairing info.
-Johan
Hi!
Yesterday I went through the upgrade of the official Dutch HTC Europe WM6 release. No problems there and WM6 works a charm.
The problem came to the light when I paired my Motorola HT820 A2DP headset. The music in the Windows Media Player plays well through A2DP, but only for a few seconds. After that it starts pausing every second. The same goes for all types of audio I play (video, TCPMP, etc).
Who can help? There was no problem using WM5 and a previous WM6 ROM (unofficial and WWE).
Thanks!!
Sounds like your sampling rates are off. Check this thread for info:
http://forum.xda-developers.com/showthread.php?t=308752
Search on Priority256_fix. That seems to be the final piece of the puzzle to fix the blue tooth problem.
nrm said:
Search on Priority256_fix. That seems to be the final piece of the puzzle to fix the blue tooth problem.
Click to expand...
Click to collapse
Or search on Bluetooth Priority Fix.
Thanks for the tips.
Ofcourse there will be always another problem: my Motorola A2DP headset now fails to autoconnect (after being paired) to the X7500. Normally when I turn on the headset you will see a headphone/musictone icon in the top bar and hear the "connect sound" through the headset. This doesn't happen now. I need to soft reset first, and after that it will work again, for a few times.
Deleting the headset and pairing again works, but the autoconnecting stops working when I try again later.
Damn, what is it with the official WM6 and A2DP?
apd said:
Or search on Bluetooth Priority Fix.
Click to expand...
Click to collapse
Hi, I still experience lags and pauses while using A2DP. With the registry tweak Priority256 it even gets a lot worse!!
Any more suggestions? I tried several headsets and even the Parrot Sound speaker set, but all of them are the same. So it's not the headset.
EDIT: I figured that it has something to do with the normal Bluetooth headset I use. I want to use the A2DP stereo headset simultaneously with the normal headset for phone calls. The A2DP headset only uses "Stereo audio" when connected, while the normal headset uses "Headset". This was no problem at all with all other devices I had and no problem as well on the X7500 running WM5. With WM6 things are different I guess.
A2DP WITHOUT the normal headset connected is no problem, like it should work. WITH the voice headset connected simultaneously, the lags come up, the prioriry fix makes no difference in this matter. And I'm stubborn, I want to have the voice headset to be connected at all times, the A2DP headset when I want to listen to music.
Any thoughts?
Hello,
I bought a Jabra BT3030 lookalike, expecting to use it to control the Blackstone, which will have wired headphones connected directly to the 3.5 jack (best sound quality, convenience of a remote, and I expect long battery life).
However I cannot get the sound to come through the headset if the remote works. It looks like if a stereo headset is connected, all sound will be sent to it (if I connect the headset to the BT receiver, it works fine).
I tried switcha2dp but if I switch off AD2P, the remote stops working.
I hoped to use only the AVRCP profile when pairing, but that is not an option (I only have "handsfree" or "wireless stereo", "handsfree" does not work for music/remote).
Can anyone offer any advice? I'd like to disable AD2P while keeping AVRCP but I can't seem to find a way...
Thanks,
Did you ever find a solution to this? I am in the exact same situation