Hi all,
I have a HTC Touch Dual on Vodafone (Spain) and of course, everything is in Spanish.
Because I am English I thought I would be clever and Flash an English ROM (TOM_Niki-Project_WM6.1_WWE_16keys_signed_Ship.exe) .
The phone is SIM unlocked. I didn't think I would need to do anything else so I started to Flash the ROM. It got to about 4% and then it stopped and I got "Invalid Vendor ID...Ver3 - NJML5567..HUEbc07<NJM5561*" or something like that.
Tried to recover the situation with the Flash program but nothing.
I removed the battery and now it starts up with the Bootloader colour bars.
The only way I can start the phone is by using MTTY and command "boot".
Looks like WINDOWS MOBILE (spanish) program is still intact but I've upset the autoload part of the system.
All I want is an English Flash. Can anyone give me some help.
A step by Step would be great because I'm new to all this.
Do I need to CID Unlock? Do I need to run those other little programs called: "sspl-1[1].16-nike"....and "hardspl-1[1].16-nike" It's a 20 key model...will that make any difference?
ROM Model: NIKI 100
ROM Version is: 1.31.164.09
Radio Version: 1.58.16.27
Just want English Phone (sob sob) Can anyone please help? Don't want to end up with a Spanish Brick !!!!!!!!
Tony (frustrated in Spain)
keeezy said:
Hi all,
I have a HTC Touch Dual on Vodafone (Spain) and of course, everything is in Spanish.
Because I am English I thought I would be clever and Flash an English ROM (TOM_Niki-Project_WM6.1_WWE_16keys_signed_Ship.exe) .
The phone is SIM unlocked. I didn't think I would need to do anything else so I started to Flash the ROM. It got to about 4% and then it stopped and I got "Invalid Vendor ID...Ver3 - NJML5567..HUEbc07<NJM5561*" or something like that.
Tried to recover the situation with the Flash program but nothing.
I removed the battery and now it starts up with the Bootloader colour bars.
The only way I can start the phone is by using MTTY and command "boot".
Looks like WINDOWS MOBILE (spanish) program is still intact but I've upset the autoload part of the system.
All I want is an English Flash. Can anyone give me some help.
A step by Step would be great because I'm new to all this.
Do I need to CID Unlock? Do I need to run those other little programs called: "sspl-1[1].16-nike"....and "hardspl-1[1].16-nike" It's a 20 key model...will that make any difference?
ROM Model: NIKI 100
ROM Version is: 1.31.164.09
Radio Version: 1.58.16.27
Just want English Phone (sob sob) Can anyone please help? Don't want to end up with a Spanish Brick !!!!!!!!
Tony (frustrated in Spain)
Click to expand...
Click to collapse
Hello you can copy sspl-1 to you phone and do that the guy wrote ind the tread when you only will do that to flash the rom ones, hardspl is when you will try more that 1 rom
My suggetion is to read the wiki and any stickies on flashing with your device there is where you will get step by step instructions. If that doesnt give you your solution then is when you are in trouble, and need to post something about it.
sorry if it sounds rude but try these
http://forum.xda-developers.com/showthread.php?t=375967
http://forum.xda-developers.com/forumdisplay.php?s=&daysprune=&f=404
Thanks knudsen81 for the sspl-1 and hardspl explanations.
And thanks thakidc about the reading up thing, which I'm doing now.
Just one more question....Am I to understand that the phone needs to be CID unlocked before it can be Flashed ? or am I on the wrong track?
I guess while I've got the Bootloader colour bars...I haven't got a brick....right?
Hey wait a minute........that's 2 questions !!!! Sorry.
Thanks for all the help so far.
Tony
Great.............
Managed to Flash the ROM.
A careful step at a time seems to be the way.
Although it is a little nerve racking watching the percentage marker creeping along...and then stopping...and then starting again...whew, it got to 100%
Happy now...
Thanks everyone.
Tony
Related
I have downloadet ATHE_wm6_x7500.zip file from another threat.
Is there anything that I should think of before I'l go on?
I know I need to take backup first.
But anything else?
And 2 more thing.
I know 3g talk is not working on wm6. Is there something else problem with it?
And is there possible to install the public release when it is released? (after I have installed this version)
Edit: Sorry for bad language.
I'm from Norway. And I spent to little time in my class
Before flashing your device:
Is it sim-unlocked and superCID ?
what is sim-unlocked and sid unlocked?
The phone is bought without simcard og something.
I can use whatever simcard I want
First Unlock
You will first want to download and install the program in this thread http://forum.xda-developers.com/showthread.php?t=315831. Make sure you read all the instructions and understand exactly what you will be doing. Then your phone will be ready to install WM6
I have read the post now.
Do I need to whatch the movie? Or is the steps readable from the exe fil when running it?
I'm in linux now and can't check the exe before rebooting.
Thanks for helping me
The steps are readable during the install but since you might not feel comfortable with english you can watch the video which always helps.
Thanks for the help. Read english is no problem. I'm just bad at writing it
First do the unlock program.
And then go for the rom file that I have mentions in first post?
Thanks again for the help
It failed after step 2. Black screen and nothing is working.
I got no error on step 1.
I have tryed to use cam button and reset to get it in debug?
And I get many colors and some info about firmware.
And there is standing USB.
Others are talking about a loading screen. Where can I find that?
Iminzilion said:
It failed after step 2. Black screen and nothing is working. I got no error on step 1.
I have tryed to use cam button and reset to get it in debug? And I get many colors and some info about firmware.
Click to expand...
Click to collapse
That multi-color screen sounds like the bootloader. Assuming you are now super CID (not sure because your message doesn't say what the "some info" is), you simply establish a USB connection between a PC and your 7500, download the WM6 ROM on to your PC, and execute it. This was exactly my experience (just got to step 1, black screen on step 2). Lot of posts on this, so make sure you do your research before proceeding. Hope this helps, and good luck.
thanks. love it. JUST LOVE IT.
I have fixed it before you posted. mmmm.
(l)
happy
This Rom is best for all those who have tmobile ameo stuck on bootloader
ENJOY
http://rapidshare.com/files/50715004/My_WM6_TMOB005.rar
Thanks very much. 2 Questions: Do I need to unlock my Ameo to use this and will GPS work afterwards?
Thanks
no neeed to unlock
gps works flawlessly
strange for me it says wrong vender id. I could really need the help because im stuck.
That is impossible, it will work for one countries ameo, but you cannpt have one thta will work for all ameos.
Hey
That is what it says. Perhaps i should explane what i did. I tryed to install the german rom on my ameo but unfortunatly i didn´t unlocked it before. So the progress aboarded.
Now i cant even do a hard reset. When i use this rom. it cant identify old rom but i start it anyway. It goes to 1% and thin it gives me the wrong vender message..
Plz help any suggestions really appreciated. I had german tmobile rom perhaps somebody has it and i can restore the old one?
Sexxmax said:
Hey
That is what it says. Perhaps i should explane what i did. I tryed to install the german rom on my ameo but unfortunatly i didn´t unlocked it before. So the progress aboarded.
Now i cant even do a hard reset. When i use this rom. it cant identify old rom but i start it anyway. It goes to 1% and thin it gives me the wrong vender message..
Plz help any suggestions really appreciated. I had german tmobile rom perhaps somebody has it and i can restore the old one?
Click to expand...
Click to collapse
Sorry I wasnt very clear, I was talking to the thread creator, your problem is due to the fact that his claims are false...
Ok i understand, can somebody supply me plz with the orignal german tmobile rom. My ameo is screwed. plz help
Cant the Tmob005 ROM be used on all Ameos?
adamelphick said:
Cant the Tmob005 ROM be used on all Ameos?
Click to expand...
Click to collapse
No, I don't think so.
For example, T-Mobile in Germany has the code T-MOB101
So, it's maybe for US-Ameos or GB-Ameos (I don't know)
all i know it doesnt work on my, and i need a rom for that i dont need to unlock the ameo because i cant untill i have it restored.
Sexxmax said:
Hey
That is what it says. Perhaps i should explane what i did. I tryed to install the german rom on my ameo but unfortunatly i didn´t unlocked it before. So the progress aboarded.
Now i cant even do a hard reset. When i use this rom. it cant identify old rom but i start it anyway. It goes to 1% and thin it gives me the wrong vender message..
Plz help any suggestions really appreciated. I had german tmobile rom perhaps somebody has it and i can restore the old one?
Click to expand...
Click to collapse
Hi
Try get into bootloader (press "camera button+stylus reset for atleast 10 seconds") then try to unlock with Olipro's unlocker (read the unlock thread first) then you can load any Rom as you want. If you unlock you can revive the device.
Good luck
Hi
Thank you for your advice. The problem is. I can go into boatloader but. It doesnt recognice a connected device. I have windows vista, if i plug in usb. It makes a sound for connection but nothing else happens.
In unlock utility it says i have to establish a activesync connection. How can i do this with only boatloader possible.
Does the unlocker work, if the rom is screwed. If it does it would be awesome and solve my problem. but plz advice on how i can make a connection to pc.
Sexxmax said:
Hi
Thank you for your advice. The problem is. I can go into boatloader but. It doesnt recognice a connected device. I have windows vista, if i plug in usb. It makes a sound for connection but nothing else happens.
In unlock utility it says i have to establish a activesync connection. How can i do this with only boatloader possible.
Does the unlocker work, if the rom is screwed. If it does it would be awesome and solve my problem. but plz advice on how i can make a connection to pc.
Click to expand...
Click to collapse
Hi Sexxmax,
I'm new to this forum (getting an Ameo tomorrow) so I may be wrong but the problem may be because you have Windows Vista. I remember reading on the Universal forum that flashing and unlocking is almost impossible to do on a Vista PC.
Interesting point. I tryed the unlocker on xp too. didn´t work either. But could it be that i get the wrong vender id as a result of that.
Do you get a german ameo? Then you could make a backup of the rom for me.
Sexxmax said:
Interesting point. I tryed the unlocker on xp too. didn´t work either. But could it be that i get the wrong vender id as a result of that.
Do you get a german ameo? Then you could make a backup of the rom for me.
Click to expand...
Click to collapse
No, I'm getting the English Ameo. There's a member on this forum called tupisdin. From what I can tell he/she is quite the expert at recovering devices that are experiencing errors. Try messaging him/her or searching for his/her posts.
Hi,
I purchased the Softbank X01HT (post Dec) in Japan when i was working in Japan. I lived with the Japanese OS even though i don't understand Japanese because I didn't want to temper with it just incase something goes wrong and i can't use the phone. Well, now im back in Australia ... and i need to unlock it and flash a new ROM to it so that I can use it in Australia .. otherwise.. it is effectively a brick....
so.. i spent the past two days reading all the valuable information u guys provided... and in the end.. i decided to first unlock and superCID my phone using the AUTO_Unlock_v3a.bat provided by POF ... and then flash it with the Jasjam telstra ROM (RUU_Hermes_DL_UK_3[1].62.305.5_6275_1.54.30.10_108_Ship.exe) also found in this forum which received good feedbacks...
ok... after i executed the AUTO_Unlock_v3a.bat program .. everything went well... and at the end of it.. the screen even said.. successful in both unlock and superCID ... so.. i assumed that my phone is unlocked...
then... i went to flash my phone with the abovementioned jasjam ROM .. and this too.. everything went just fine ... and now.. my phone is working with this new ROM (cool! first time im able to read my x01ht coz its in English) ...
without a sim.. the OS works fine.. etc etc...
however, when i tried to put a telstra sim card in it ... its still simlocked ...
the SimLock screen comes up and requests me to input unlock code ...
so.. i did more reading and researched but can't find any solution to this ... i even tried that "unlock" code (22051978) but it doesnt work ...
Please.. can someone help me with this issue with my phone? now.. it seems that i just need to unlock my phone to use it as my jasjam ROM is working fine. Below are further details:
ROM version: 3.62.305.5
ROM date: 11/06/07
Radio version: 1.54.30.10
EtRom version: 3.62.305.116
any help/comments will be highly appreciated... thanks in advance...!
read somewhere that if you let the softbank go through the 1st boot and it installs all the extra stuff you wont EVER be able to unlock it again. some one else may need to clarify this but apparently you need to soft reset after you've reached the today screen but before the customisations start. if you didnt do this then you probably wont be able to unlock it. sorry if this is wrong/bad news.
Hope someone else can corroborate this.. cheers...
thanks for your reply ultramag69 although i hope that u r wrong.. hahaha
fingers crossed ... hopefully.. positive news from some experts ...
After re-reading the posts, i cannot find that I did anything wrong.
This link "http://forum.xda-developers.com/showthread.php?t=293665" states that the unlocker v3a "can be used in all HTC Hermes devices, no matter which bootloader version the device is running", with the exception of "x01ht post April devices" (i.e., white x01ht).
However, my x01ht is black and is a pre-April device.
So, I am still not sure what is wrong. Please help please help any experts out there ...
POF ... if you are there.. please help ... i need your expert advice thank you in advance.
ultramag69, i think that you are referring to this "http://forum.xda-developers.com/showthread.php?t=301952".
Quote:
"Here's how to unlock the new batch of SoftBank X01HT devices with radio 1.14.01.10.
This process is ONLY valid for new devices which have never turned on or let the SoftBank Extended ROM install.
If you have already let the ExtROM install you CAN'T sim-unlock it."
Fortunately, i find that this does not apply to me because my phone is not post april. Also, originally, my radio was never 1.14.01.10. It was 1.14.00.10.
help..........
snowboarder said:
Hi,
I purchased the Softbank X01HT (post Dec) in Japan when i was working in Japan. I lived with the Japanese OS even though i don't understand Japanese because I didn't want to temper with it just incase something goes wrong and i can't use the phone. Well, now im back in Australia ... and i need to unlock it and flash a new ROM to it so that I can use it in Australia .. otherwise.. it is effectively a brick....
so.. i spent the past two days reading all the valuable information u guys provided... and in the end.. i decided to first unlock and superCID my phone using the AUTO_Unlock_v3a.bat provided by POF ... and then flash it with the Jasjam telstra ROM (RUU_Hermes_DL_UK_3[1].62.305.5_6275_1.54.30.10_108_Ship.exe) also found in this forum which received good feedbacks...
ok... after i executed the AUTO_Unlock_v3a.bat program .. everything went well... and at the end of it.. the screen even said.. successful in both unlock and superCID ... so.. i assumed that my phone is unlocked...
then... i went to flash my phone with the abovementioned jasjam ROM .. and this too.. everything went just fine ... and now.. my phone is working with this new ROM (cool! first time im able to read my x01ht coz its in English) ...
without a sim.. the OS works fine.. etc etc...
however, when i tried to put a telstra sim card in it ... its still simlocked ...
the SimLock screen comes up and requests me to input unlock code ...
so.. i did more reading and researched but can't find any solution to this ... i even tried that "unlock" code (22051978) but it doesnt work ...
Please.. can someone help me with this issue with my phone? now.. it seems that i just need to unlock my phone to use it as my jasjam ROM is working fine. Below are further details:
ROM version: 3.62.305.5
ROM date: 11/06/07
Radio version: 1.54.30.10
EtRom version: 3.62.305.116
any help/comments will be highly appreciated... thanks in advance...!
Click to expand...
Click to collapse
hey bro!when you r already flashed v3a unlock,than you should down a software name like "Hard-SPL-V7",it will help you to unlock the exrom,make you able to flash the new os\rom...
"HARD-SPL-V7" has 2 software,1st is "RUU_signed.nbh",2nd is "RUUWrapper.exe".
devileric, read post carefully. snowboarder has no problem with reflashing oses, its the sim that needs unlocking now and hard spl WONT do that...
Still reading and researching. I'd probably retry the unlock tool. it cant hurt but may work... cheers
devileric ... yes ... ultramag69 is correct ... my new English Telstra Jasjam OS works like a beauty when it operates WITHOUT a sim card. However, when i try to insert a telstra (or optus) sim card in there, there is a prompt that requires me to enter a unlock code. Please note that the unlock code 22051978 does NOT work in this case (also doesnt work in alot of other cases that i read in this forum).
Ultramag69, thank you for your help and replies, much appreciated. I actually did try the unlocking program again (three times ) . However, when i execute the AUTO_Unlock_v3a.bat when my OS is the new telstra jasjam OS, my phone will freeze on the telstra startup screen after the radio update step of the unlocking program when it automatically resets. Thereafter, even when i perform soft reset again and again, it will just freeze there. When that happened the first time, I thought that I bricked my phone .. ahhaha.. but fortunately, I was able to simply go to the tri-color boot screen and then simply flash the above said telstra Jasjam ROM. This will get me back to square one, i.e., working Jasjam OS, but phone is still sim locked.
I spent another night last night reading the applicable threads. I find that quite afew other people had the same problem as me. And I also find that whenever such problem is posted, its either ignored or a moot reply is given.
So, for the experts out there, if there is a solution to this, please kindly let me know. I am sure it will others will find it helpful too. Thank you.
Sorry wrong post
Hi.
I tried to find this on the forum and wiki, but i couldn't, so i want to ask.
I got a used Softbank X01HT, and seller said it was unlocked, but when i put in my sim i can do things for about 30 seconds, and then there comes a U-SIM screen and it asks me to enter something, i guess ( It's in japanese ).
How can i get this to go away? Is it even unlocked?
ROM: 1.33.761.4
Radio: 1.16.00.00
When i make call to phone i does to through and people can all even though U-SIM screen is there, and when people call, it is possible to go to the menues and such.. But when they hang up it goes back to U-SIM screen.
Please help
I have already read the Post april X01HT thread, though it is not relevant in this case because this is model from 2006.
Thank you
this is SIM unlocked phone (radio version 1.16.00), but your Windows Mobile ROM is the original SoftBank Japanese version that enforces USIM message...
You can flash to some other Windows Mobile ROM, but make sure you check Hard-SPL thread first (sticky in Hermes upgrading etc)
Hi thank you again!
I read something like that in the SIM unlock thread.
So i just need to install Hard-SPL and then flash a ROM?
Do i also need to do CID unlock? (http://forum.xda-developers.com/showthread.php?t=293665)
I would like to be able to write japanese with the phone, so is that possible if i flash? I saw a thread about installing japanese input/output support, is that possible to install on every rom?
And can you reccomend a rom or post link to ROM you think i should install?
THANK YOU! can't wait to start using it.
Now i just tried the Hard-SPL thing. But i get Update error 260 saying my device is not connected. I have ActiveSync 4.5 open and i have synced..
so i don't know.
I don't know if it has anything to do with the USIM screen being on all the time?
I see Active sync closing down as soon as it starts updating.. but then it can't update, right?
easiest way is to use SoftBank SIM for flashing everything, that way you avoid USIM message...
if you dont have SoftBank SIM available, search for welcome.exe on this forum.
SoftBank put a software SimLock in the ROM which can be removed with welcome.exe from imei-check unlocker. (http://www.imei-check.co.uk/m3100unlock.php) Start it up with you phone connected to USB and ActiveSync enabled... After the program asks for some password file, just close it! (close dos prompt window)
About Japanese IME (kanji & kanna input), i prefer flashing some newer English WM6 ROM + installing separate Japanese IME from cab. Old SoftBank's ROM is very slow and limited...
Super CID is just there if you flash HardSPL....
HI, thank you!
I found out that the USIM screen goes away if you just press on the signal bar and say that you don't want to receive signal.. den i can ue it.. And then i could do the Hard-SPL which i did with no problem. thank you!
Ah so if i just download that program and close it down at that time the USIM screen with never come again?
Yea i want to flash it to newer. But i'm not sure which one because i've heard a lot of people broken their phone :/
could to give me a link to a few "good" English WM6 ones?, though i there is probablt many.
i will try out the imei-check thing now ^_^!
Once you flash HardSPL; when you want to flash only Windows Mobile ROM only you dont have to worry about bricking (destroying) your phone. Only flashing different radio could be dangerous.
For the version, you have to find out yourself, there are so many... Check Hermes Mobile 6 threads, there are even some special Japanese cooked ROMs if i remember correctly. Also check user signatures for what versions are different people using...
thanks so much! i managed to get the USIM screen gone with your help.
Ahh i see, but install new version wont it also change the radio? wasn't that dangerous?(sorry if i ask dumb question)
so if i chose this for example: http://forum.xda-developers.com/showthread.php?t=359458 i can still make it with Japanese IME?
i think i will try hehe!
that link you provided is Schap's WM6 Pro 4.31 ROM... It is one of the most stable out in the wild, and it comes without radio, so flashing that one should be safe.
Oh ok thank you! then i will try this.
Last question before i do anything
This that ROM it is still possible to do the Japanese IME thing?
I found this thread
http://forum.xda-developers.com/showthread.php?t=298919
It explains something of getting japanese on phone, was this what you meant by japanese IME? or is there an other method, if yes, please telle me/ give link.
Now time to have your Hermes speak Japanese
Japanese fonts
Use the excellent work from Asukal, that you can find here:
http://www.asukal.jp/WM5/LetsJapanNo5.zip
I did have a problem with it: once I executed it, I could not sync with my Exchange server (Quite a pain for my push email account...)
Asukal found the solution: edit the registry, and change
[HKEY_LOCAL_MACHINE\Software\Mobem\CE-Star] "MyNLS" = "\windows\wince.nls"
Japanese input
Not using for myself, but these work perfectly (I tried):
http://www.asukal.jp/WM5/BagojsINPUT.zip
*** EDIT
If you prefer a Japanese input without the annoying "Floating bar", ie just the same input way as your original WM5 Softbank ROM, just downlaod and install the "MS IME31 J" link from Asukal's page:
http://hn801.hkes.com/Data/SIP/IME_31J_QVGA_F.zip
Click to expand...
Click to collapse
THANK YOU!
That solution you mention should work fine, but newer solution is available. Check http://forum.xda-developers.com/showthread.php?t=445550
Hi! THank you very much! i was finally able to flash the ROM!!
And i have installed the Japanese fonts and Input thing!
It works. but after install i can not sign onto MSN Live Messenger. Is there anyway to fix this problem?Maybe i should change something in Regedit?? Or should i uninstall the fonts again? :/
It gives me this message: There's a Connectivity problem. Make sure you're in an area with good reception and try again.
I have tried over and over and WIFI is up and working..
So any answer i would be so greatful and finally be able to use the phone like i dreamed of !
Thank you.
sorry, i dont use msn, i have no clue about it...
明けましておめでとう。
Ok thank you anyway!!
明けましておめでとう〜
良い年でありますように♪o(^-^)o
hi
I've a SPV C100 bought from orange france
I tryed to upgrade by another rom
when upgrading begin it's stoped at 13%
and restart i got a splash screen (start up orange logo)
I tryed most of rom but upgrading stops at 4% or i got invalid vendor ID
now i can't use my phone if someone can help me
Did my phone die?
I need orange rom fr original or another solution
I'm waiting for your answers
please help me!!!!
IMEI:359534005798165
S / N:SZ645F804879 A
P / N:99HCD060-00
HTC Innovation
Hello,
You should read before trying to flash your device. There is sticky post in the forum who contains a lot of important informations about Hard SPL.
About the original orange Rom i don't know where to find it.
fla242
after a lot of search, finally I got here and read this post...
I encountered the same problem, and I think my phone is 80% dead!
My phone was unlocked, but carelessly, I didn't complete the hard-SPL flash procedure and flash a new ROM directly, so it is dead...
I downloaded an original Orange ROM, but process stopped @4%, and returned "INVALID VENDER ID". Is there anyway that I can flash a new ROM?
Now my phone can enter the rainbow screen only, and it reads:
ONBL 1.08.0000
SPL 1.08.0000
Any experts here can offer a solution? Can I flash rom via SD card, and how? Really really appreciate your help.
SPV C100 was reborned!
I just can't hide the excitement when I finally flashed a ROM back to my phone.
This model is already quite old. Not sure if anyone still encounter the same problem. Anyway, I'd like to share how I did it, just in case it still helps you.
The key point is called "HTC Goldcard". It is made of a normal Mini-SD card, but it helps you to get a super-CID in tri-color mode.
Google it to find more details, and I am sure you guy can work it out yourselves. You could PM me as well, if you understand my Chinglish
how
how o make htc gold card for spv c100
l have not find any thing
imyels said:
I just can't hide the excitement when I finally flashed a ROM back to my phone.
This model is already quite old. Not sure if anyone still encounter the same problem. Anyway, I'd like to share how I did it, just in case it still helps you.
The key point is called "HTC Goldcard". It is made of a normal Mini-SD card, but it helps you to get a super-CID in tri-color mode.
Google it to find more details, and I am sure you guy can work it out yourselves. You could PM me as well, if you understand my Chinglish
Click to expand...
Click to collapse
The HTC GoldCard is a great way of rescuring a WM smart phone or ppc,it not only works on c100,but also other HTC mobile sevices
please tell me is there any way torecover spv c100
Here you can find a few Oxygen ROMs