I upgrade a ROM by softSPL, after that my qtek in not responding. I Can not to switch it on.
Is there any chance to repaire it???
Please help me.
Thank you so much.
---------------------------------------------------
Qtek 9100 WM5
2.17.0001 IPL/SPL
this is all what i know.
Maybe you flashed a ROM with G3 IPL/SPL to your G4 Wizard.
In that case, it is a brick and there is no known method to recover unless replacing DoC Chip or mainboard.
dravidek said:
I upgrade a ROM by softSPL, after that my qtek in not responding. I Can not to switch it on.
Is there any chance to repaire it???
Please help me.
Thank you so much.
---------------------------------------------------
Qtek 9100 WM5
2.17.0001 IPL/SPL
this is all what i know.
Click to expand...
Click to collapse
Take out battery for 5 minutes and then try again to boot it.
Also try if you can get it into bootloader ....but after each procedure take the battery out just to make sure it's not frozen.
If ur device is G4 then make sure u not flashed with G3 tools
thank you so muc for you help. Today morning I was at service and the technican helped me. My main desk in MDA was dead. Service changed the MDA I so happy because I have a new MDA.
My MDA have a gwaranty.
dravidek said:
thank you so muc for you help. Today morning I was at service and the technican helped me. My main desk in MDA was dead. Service changed the MDA I so happy because I have a new MDA.
My MDA have a gwaranty.
Click to expand...
Click to collapse
nice news
but did u mean they changed the whole device or only the dead desk?
and u may ask them about jtag pins of wizard's cpu (omap850) , i will appreciate it
lmd0990 said:
nice news
but did u mean they changed the whole device or only the dead desk?
and u may ask them about jtag pins of wizard's cpu (omap850) , i will appreciate it
Click to expand...
Click to collapse
they changed dead desk only.
Related
My Wizard Flash the G3 IPL/SPL, How to wakeup it?
gzDragon said:
My Wizard Flash the G3 IPL/SPL, How to wakeup it?
Click to expand...
Click to collapse
You need to be clearer.
1.) Is your device a G3 or a G4 chipset?
2.) If you flashed a ROM with the IPL/SPL information for the wrong chipset, you may have bricked it.
3.) Is it CID unlocked? If so, flashing a ROM on your device may have bricked it.
Please give us more detail about what it's doing.
If you have truly bricked it (made it totally unusable), your only option may be to send it in for repair/replacement. If not, there may still be some hope.
It appears that English may not be your primary language. If this is the case, I HIGHLY recommend getting some personal assistance in understanding the information provided by the person who provided the ROM.
DON'T EVER FLASH A ROM IF YOU DON'T UNDERSTAND THE INSTRUCTIONS 100%!!!!!!
If you think you just have a feel for it, go back and re-read it until you understand!
That having been said, WELCOME TO THE COMMUNITY!
We all help as we can.
I confirm it is cingular 8125(Wizard 100) is G4 chipset. Befor i flash, IPL/SPL is 2.25.0001. I may have bricked it!
Thanks!
yes, it's definitely bricked. Never flash a G4 with a G3 ROM. Check ur Private Message.
i have the self problem with my xda mini s, before was an G3, then i have updatet to G4, if bricked, .... nothing if
plzz help
i have bricked my qtek will updating, there is any way to turn it on..
plz help me..
If you flash the G3 ipl/spl to a G4 wizard.I'm sorry to say that your Wizard is broken .Are you in china now ,if you in china,you can change the brocken chip .it's cost 400 RMB.
I flashed a ROM with G3 IPL/SPL to my G4 and was able to recover by cooking my own ROM.
please can you share ur cooked rom with us please?
I would be happy to. However, all I did was followed the tutorials found on this site, and cooked it using the WWE off htc's website, stripping the IPL/SPL.
the RUU_Athena_HTC_WWE_1.25.405.2_1.38.00.zip at the ftp is corrupted, can somebody confirm that???
I confirm ! :-(
htc x7500
i have erased it and now starting to reload it again .
this time i have tested it and its working 100 % i can only say to all of you out there that need it please be advise that this is only the original shipped rom for the htc black version and it will not install and run on any other unit beside the htc unit so all of you users whoare trying to install this riom on the t-mobile ameo or vis versa the tmobile rom on the htc x7500 this is not working for now untill yoru units will be cid unlocked.
i have spoken today to www.imei-check.co.uk which told me they have a soltion already but they are not sure if the will give it over the internet or just like the jas jar and spv-m5000 or 02 xda exec they will need you to send in your deivce to them .
so i hope this info clear for you a bit the things.
gd night
motin said:
this time i have tested it and its working 100 % i can only say to all of you out there that need it please be advise that this is only the original shipped rom for the htc black version and it will not install and run on any other unit beside the htc unit so all of you users whoare trying to install this riom on the t-mobile ameo or vis versa the tmobile rom on the htc x7500 this is not working for now untill yoru units will be cid unlocked.
Click to expand...
Click to collapse
Do you mean that this rom can be used on any unit shipped by HTC without taking in account the original language?. For example, can it be used in a italian or spanish device?
thanks
I suppose it still being WM5, can you confirm, please?
beginner said:
I suppose it still being WM5, can you confirm, please?
Click to expand...
Click to collapse
yes, still WM5, WM6 will be out in about 2 months
wu5262 said:
yes, still WM5, WM6 will be out in about 2 months
Click to expand...
Click to collapse
I have 5.1.465 over HTC X7500, is same level as this post? I think mine is 1.25.01
Need help, where can I can the latest HTC x7500 rom.
I have a test rom.
Thanks
test rom
gd day sir
if you have test rom go to the ftp and take the shipped rom from htc.
ftp://xda:[email protected]_HTC_WWE_1.25.405.2_1.38.00.00_Ship.rar
this is only to be used on the htc-x7500
this is the shipped rom with wm5 and not wm6
will work only on the htc branded device and not the dopod or tmobile
gd luck
This file is corrupted
Why not T-mobile or Dopod ?
Will it break the device?
Goompie said:
This file is corrupted
Why not T-mobile or Dopod ?
Will it break the device?
Click to expand...
Click to collapse
at the moment, there is no tools that allow us to flash other version of the device such as t-mobile and dopod, so please don't do it, by doing so, you void the warranty and have chances to brick your device, leave it to the advance user here first, once they confirm a method, then you do it.
Thank You, but file still corrupted.
Can i use MaUpgradeUt_noID.exe like Universal and Hermes?
masayasu said:
Can i use MaUpgradeUt_noID.exe like Universal and Hermes?
Click to expand...
Click to collapse
no, it doesn't work on Athena, we need a new one.
htc- x7500 shipped rom
i am trying myself to get the rom from this link
ftp://xda:[email protected]_Ship.rar
and see what is wrong with it as i am the one who uploaded it here
will advise u soon
its true well seem to be some winrar error
ok i am uploading the zip version. now
here it is
ftp://xda:[email protected]/Uploads/Athena/ROMS/RUU_Athena_HTC_WWE_1.25.405.2_1.38.00.zip
hope now all ok
Thank You. Works great.
Ameo is dead
I tried to update my ameo.
Now i see only Loading....
Can you help me ?
Best regards
Christophe
Ecraseur said:
I tried to update my ameo.
Now i see only Loading....
Can you help me ?
Best regards
Christophe
Click to expand...
Click to collapse
Ok, I sloved the problem. Iremoved the MiniSD card and now it's work !
YES.
flashing the wrong rom WILL brick your phone. dont do it.
I have the above wm smartphone,its not sim locked or something.
I want to install wm6 and also i want some support for greek language.
Please tell me what should i do cause i am a total noob on windows mobile and i am affraid that i might brick it.
Is there anyway i can unbrick it if it bricks?
Thanks a lot...
please guys help me,I dont want to ruin my ppc
I bought it from ebay so i forget about the warranty...
it had only been an hour.. give people time to reply.
I updated with this:
[WM6.1]ROM Prophet My Green Edition[Full and Clean Version] (UC)(Update on 15.4.2008)
and it shows only the bootloader screen.Now i am installing the nvid.exe again.
At least it will unbrick it.
Gherudos said:
I updated with this:
[WM6.1]ROM Prophet My Green Edition[Full and Clean Version] (UC)(Update on 15.4.2008)
and it shows only the bootloader screen.Now i am installing the nvid.exe again.
At least it will unbrick it.
Click to expand...
Click to collapse
you have to HARDSPL first.
Info here.
http://forum.xda-developers.com/showthread.php?t=350033
If your device is G4. Your SPL should change into this one 2.G4.4PDA or 2.G3.4PDA for Device G3
If your SPL not one of them. You will always stuck up at bootloader mode.
Did you didnt read , how to upgrade it.
I wrote it at my Thread.
You must hard SPL before upgrading! If you want to have the device in greek, try Gullums Coffee ROMs.
HI ALL
I AM IN BIG PROBLEM SINCE MORE THAN ONE YEAR
MY PROPHET JAMIN G4 STCKED IN THREE COLOR BOOT SCREEN
AND I HAVE THIS ON THE SCREEN
IPL 1.000
SPL 2.20.001
ALL THIS HAPPENED AFTER I WAS UPGRADING AND I THINK I USED AN INCORRECT SOFTWARE
I TRIED MANY AND MANY AND MANY ROMS AND I READ ALL POSTS AND I TRIED HARD REST AND I DID EVERY THIN AND IT IS IN BOOT ,OADER AL THE TIME EVEN THE ROMS MAY PASS TILL THE END AND SAY CONGRATULATION AND ON PHONE 100% BUT AGIN WITH RESTART IT IS THE 3 COLOR SCREEN
I THINK I PUT G3 ON G4 DEVICE IS THERE ANY SOLUTION
PLEASE HELP ME
THANKS
http://forum.xda-developers.com/showthread.php?t=389558
You read all the treads. Let me laugh. In 5 minutes I found this tread here, and there is the answer in the first site. Good luck.
i think i said expert only
sorry for saying this
but i think i brick my phone so i need expert help and i can pay for this
so please expert only
thanks all
all_brother2002 said:
sorry for saying this
but i think i brick my phone so i need expert help and i can pay for this
so please expert only
thanks all
Click to expand...
Click to collapse
Hä, do you think the Moderator l3v5y is no expert. I don`t know your problem, pardon, you can read in this tread, how do you wakeup your prophet. If this not go, than you must bring him in prophetclinic, or when you have no money than you have no luck.
hi
thanks so much for ur interest
i want o repair my phone that is all
and i can pay but i do not where i can repair or to whom i can send i am in egypt and i caled htc company and i mate company they said we do not work in this model can u imagine this
so if u know any one who can help i am ready to send y phone and pay
and again sorry for my acuusing about no expert
thanks
hi am from k.s.a i had the same proplem but if you dawnload the orignal rom from i-mate web site ftp://ftp.clubimate.com/ it may work i did tray a lot of roms none of them workd exsept the one from the site.
soory for the bad language!!!
Expert only?
Search this site and you will find the original ROMS that came with your phone. you will allways have to downgrade to restore it! I have had many HTC go wrong on me. I use an old trusty favourite Prophet_4.0.0.0.4_PV.zip Good luck!
Just Click on the first link, follow the steps and you can go.
Just go to bootloader,
DO HARD-SPL
Then flash again!
and u can drive away with your new OS on your old Prophet! xD
have fun!
sorry
i think no one understand me here in this post i am sayig i have ipl 1.000
and spl 2.20.001 so i have ipl for g3 on my spl g4 i mate jamin so any one have solution or i will destroy this mobile
I just think, you need to try to install the original jamin rom again.
or just Qtek rom: http://www.qtek.nl/_BIN/PRO_DT_WWE_220734_2207114_026121_Ship.zip
then it will be ok. and you can try to upgrade again
have fun!
Hi guys,
my brother gave me his old mobilephone yesterday. He told me that he hasn't flashed it.
There ist the old WM 5.0 on it, so i want to flash a new rom. I read some turorials which told me that it is difficult to flash a G4 Wizard.
Now the problem : when i start the mobilphone it shows me : IPL 3.08.001 & SPL 3.08.001.
Is it true that i can't flash it with this versions??
Can I downgrade them?
Thanks for yout answer!!!
Rammi
hello Rammi
rammi081 said:
Hi guys,
my brother gave me his old mobilephone yesterday. He told me that he hasn't flashed it.
There ist the old WM 5.0 on it, so i want to flash a new rom. I read some turorials which told me that it is difficult to flash a G4 Wizard.
Now the problem : when i start the mobilphone it shows me : IPL 3.08.001 & SPL 3.08.001.
Is it true that i can't flash it with this versions??
Can I downgrade them?
Thanks for yout answer!!!
Rammi
Click to expand...
Click to collapse
hello there, in fact i have helped a friend to flash his WIZARD with the same IPL/SPL as yours.
So it worked 4 him, i hope you can flash yours as well
by the way if planning to flash remember to have a full battery charged
hello Rammi
rammi081 said:
Hi guys,
my brother gave me his old mobilephone yesterday. He told me that he hasn't flashed it.
There ist the old WM 5.0 on it, so i want to flash a new rom. I read some turorials which told me that it is difficult to flash a G4 Wizard.
Now the problem : when i start the mobilphone it shows me : IPL 3.08.001 & SPL 3.08.001.
Is it true that i can't flash it with this versions??
Can I downgrade them?
Thanks for yout answer!!!
Rammi
Click to expand...
Click to collapse
hello there, in fact i have helped a friend to flash his WIZARD with the same IPL/SPL as yours.
So it worked 4 him, i hope you can flash yours as well
by the way if planning to flash remember to have a full charged battery
thanks 4 your answer tigrisimo!!
Do if you have flashed a G4 ROM??
Is it sure that the 3.08.001 tells me, i am having a G4?
Tomorrow i am going to flash my mobilphone
you can flash your G4 Wizard without almost any problem if you follow the instructions correctly. Remeber to use only custom rom without IPL/SPL or you'll endup with a paper weight. HardSPL is not safe as far as I know, only SoftSPL.
good luck!
great!
rammi081 said:
thanks 4 your answer tigrisimo!!
Do if you have flashed a G4 ROM??
Is it sure that the 3.08.001 tells me, i am having a G4?
Tomorrow i am going to flash my mobilphone
Click to expand...
Click to collapse
first read all the manuals you can find on this site, if need assistance tell me!
just one more thing:
get a beer, or a cig, coffe perhaps, because the procedure is going to take about 7 mins (depends on your Computer) dont worry, if the flash procedeure stops at 99% relax, is pretty normal (it will finish in some more secs)
GOOD LUCK
Yeees it run!!!
I just did it how it is discribed in the tutorial.
Thx board!!
by the way, i was brewing a cup of coffee when the mobilephone was flashed. I came back and everything was done