dcd 3.1.2
Do i need to run the carrier cab after the new rom/radio? i have verizon and i just did the over the air programing and it seems to work fine. I can make calls and receive txt messages. What does the carrier cab do? I tried running it and now the phone doesn't work (the phone program doesn't even run anymore) and i get no reception bars.
Also, how come there's no more mms tab in messaging?
one last question, what's that gear looking thing that's crossed out in the phone screen to the left of the recent call button?
Your second question is answered by your first statement. The MMS is in the carrier cab.
As for the reason, I believe it is do allow upgrades without having to flash your Rom.
calash said:
Your second question is answered by your first statement. The MMS is in the carrier cab.
As for the reason, I believe it is do allow upgrades without having to flash your Rom.
Click to expand...
Click to collapse
I had mms on stock rom. Is there a reason i don't have a mms tab in messaging?
I had mms on stock rom. Is there a reason i don't have a mms tab in messaging?
Click to expand...
Click to collapse
I'd suggest before you just start posting question after question, that you search and read these forums, as well as the Titan Wiki. There's a search function built in, or you can use Google to search them. There's an entire thread dedicated to 3.x.x roms and MMS.
Related
Okay, so I've never posted here before.. I've only lurked enough to figure out how to install a WM6 ROM on my phone.
I've been having a lot of problems with my Hermes lately (can't make/receive calls, sim missing, text messages not sending or receiving)... I have not figured out if it's from dropping it too much or if it's because I'd been running a WM6 rom on it. So I decided on Saturday to switch to another version of the WM6 ROM's available around here...
I installed 3DES.3 and so far I've been having more and more issues as far as making and receiving phone calls.
So the issue is that with the slider closed I'd go to the phone screen and then t9 in a user's name and then call them. The call would not connect... I kept trying and normally wouldn't notice the number it's trying to dial, but the phone is trying to dial a 107140 in front of every call made through the t9 dial menu.
Is anyone else experiencing this? Is the ROM trying to make long distance calls on our behalf? Should it be taken off the website?
Thanks guys,
Mitchel
mitcheloc said:
Okay, so I've never posted here before.. I've only lurked enough to figure out how to install a WM6 ROM on my phone.
I've been having a lot of problems with my Hermes lately (can't make/receive calls, sim missing, text messages not sending or receiving)... I have not figured out if it's from dropping it too much or if it's because I'd been running a WM6 rom on it. So I decided on Saturday to switch to another version of the WM6 ROM's available around here...
I installed 3DES.3 and so far I've been having more and more issues as far as making and receiving phone calls.
So the issue is that with the slider closed I'd go to the phone screen and then t9 in a user's name and then call them. The call would not connect... I kept trying and normally wouldn't notice the number it's trying to dial, but the phone is trying to dial a 107140 in front of every call made through the t9 dial menu.
Is anyone else experiencing this? Is the ROM trying to make long distance calls on our behalf? Should it be taken off the website?
Thanks guys,
Mitchel
Click to expand...
Click to collapse
the ROM you are talking about isnt exploited to my knowledge... but it is old and i think 3DES has stopped supporting it...
you are also in the wrong Forum... you should have posted in Hermes Windows Mobile 6... download this ROM and try it...
Thanks for the fast reply. I'll switch over to that ROM. Something is definitely up with this ROM though.
Thanks again,
Mitchel
I'm having problems sending pictures. Sometimes it seems to work and sometimes it doesn't. I'm using GC Arcsoft MMS 5.0.31.25. Is that the latest version? I have to keep sending the picture over and over again and only sometimes it goes through. Any ideas on what might be wrong? Thanks!
Does it give an error?? You could be in a poor coverage area???
azclown said:
Does it give an error?? You could be in a poor coverage area???
Click to expand...
Click to collapse
Reload the Verizon Carrier cab... then do *22899 and *228 , 2
I just recently upgraded from dcd 3.2.3 to 3.2.5, but I didn't really do any MMS messages before just SMS. It would give me two different error messages, the first one I can't remember, but the one that happens the most is, "No Valid Recipiants for this MM", but it is valid. It then saves it to the drafts, sometimes if I keep sending it over and over again it finally goes, but even though it says it goes they don't always get the picture. It's not poor coverage area. I'm sending from my house and I used to send pics all the time before I did the ROM upgrade and I just used my stock ROM. What's the latest version of the MMS software?
Also, when I do a SMS message I can type in a partial of the name of the person I want to send it to, but with the MMS not everyone is coming up like they do with the SMS messages.
Do I need to upgrade the Radio to the latest version .50? If I do that will it erase all my data or is that only when I do the DCD ROM upgrade? Thanks..
nitro66215 said:
Reload the Verizon Carrier cab... then do *22899 and *228 , 2
Click to expand...
Click to collapse
I am having one issue with my phone. It was a Sprint Touch Pro that has been fully flashed over to CricKet and everything seems to work just fine with one exception....when I get an mms it gives me an error saying "we are unable to download your message. It will remain in your inbox." Then the only way I can see it is if I click on the message, then click download.
UPDATE:
I just managed to figure something out. I get that error if I don't have a data connection established when I receive the mms, but if there is a data connection established the mms works like it should without a problem.
Anyone with any ideas?
kclive said:
I am having one issue with my phone. It was a Sprint Touch Pro that has been fully flashed over to CricKet and everything seems to work just fine with one exception....when I get an mms it gives me an error saying "we are unable to download your message. It will remain in your inbox." Then the only way I can see it is if I click on the message, then click download.
UPDATE:
I just managed to figure something out. I get that error if I don't have a data connection established when I receive the mms, but if there is a data connection established the mms works like it should without a problem.
Anyone with any ideas?
Click to expand...
Click to collapse
It might sound like a silly question, but doesn't MMS use data connection in WAP? Maybe the system is trying to act too fast (faster than what your phone can establish a WAP connection). In other words, it might be set to time-out if the connection is not detected within an x amount of time. Try to see if your MMS program allows you to increase that "time-out". Good luck!
egzthunder1 said:
It might sound like a silly question, but doesn't MMS use data connection in WAP? Maybe the system is trying to act too fast (faster than what your phone can establish a WAP connection). In other words, it might be set to time-out if the connection is not detected within an x amount of time. Try to see if your MMS program allows you to increase that "time-out". Good luck!
Click to expand...
Click to collapse
Yes, MMS does use WAP. I am using Arcsoft 5.0.27.25 for my messaging. I have talked with other CricKet users and they say the settings work for them right after the flash. I have even went as far as to compare the EPST settings from my mogul (which works perfectly) to my touch pro and everything checks out. This really has me baffled.
The maker of the rom I am using sent me some directions on flashing this rom and I followed them step for step and still have this issue. Does ANYONE have any ideas on this? Anything would be appreciated.
Thanks
Still no progress other than what I have already posted. This isn't making any sense to me at all. I LOVE this phone but this problem has me about to the point of using it as target practice.
I can't believe that nobody else has run into this or has any ideas on how to fix this.
kclive said:
Yes, MMS does use WAP. I am using Arcsoft 5.0.27.25 for my messaging. I have talked with other CricKet users and they say the settings work for them right after the flash. I have even went as far as to compare the EPST settings from my mogul (which works perfectly) to my touch pro and everything checks out. This really has me baffled.
Click to expand...
Click to collapse
Okay... not sure how much help this is gonna be, but...
I have a TP flashed to MetroPCS running MR 4.16 and Sprint Arcsoft 5.0.70.24... MMS is a real issue with MPCS and I think Cricket users have less probs, but what you've described is similar to my experience... before I flashed a new rom and changed my arcsoft version, it was exactly as you described, btw...
Maybe you need a dif version of Arcsoft. Now, when I get an mms, it'll show up initially as an empty message, when I click on it it will say I need to download, yadda yadda... but if I wait patiently, a few minutes usually, it will complete the process all by itself. I don't think it matters if it's verizon's or sprint's, but I had an older version of Verizon's Arcsoft first (that was awful) and now I have Sprint's... it works flawlessly, just a little slow sometimes.
That's my suggestion, though I know little about Cricket except what I've read in the Metro forums... good luck!
Mmaureenn said:
Okay... not sure how much help this is gonna be, but...
I have a TP flashed to MetroPCS running MR 4.16 and Sprint Arcsoft 5.0.70.24... MMS is a real issue with MPCS and I think Cricket users have less probs, but what you've described is similar to my experience... before I flashed a new rom and changed my arcsoft version, it was exactly as you described, btw...
Maybe you need a dif version of Arcsoft. Now, when I get an mms, it'll show up initially as an empty message, when I click on it it will say I need to download, yadda yadda... but if I wait patiently, a few minutes usually, it will complete the process all by itself. I don't think it matters if it's verizon's or sprint's, but I had an older version of Verizon's Arcsoft first (that was awful) and now I have Sprint's... it works flawlessly, just a little slow sometimes.
That's my suggestion, though I know little about Cricket except what I've read in the Metro forums... good luck!
Click to expand...
Click to collapse
I will give that a shot after I get home from work in the morning. I hope it works as I am not sure what else the issue could be.
Is it just me or is anyone experiencing a "Forbidden" error when sending/receiving MMS after updating to AT&T's new ROM with 1.14.25.35 Radio?
I've reflashed the updated AT&T ROM and then flashed NRG's latest 6.5 ROM with the correct Rilphone.dll and still have the Error. I even tried sending from the new stock ROM and got the error. I did this multiple times to make sure it wasn't a bad flash and still have the "Forbidden" error. Did I do something wrong when I flashed the new ROM and Radio? The settings in MMS are correct and I didn't load anything else prior to testing MMS.
At first I thought it was AT&T and wasted over 30 minutes with a rep that knew next to nothing. Then it dawned on me that this all started after I updated to the new ROM/Radio release for AT&T on HTC's website. So, I reverted back to the original shipped ROM with 1.02.25.32 Radio, flashed NRG's latest 6.5 ROM and can now send/receive MMS.
I had the same forbidden error and had to talk to tech support from att.. apparently it's because i had placed my sim into an iphone and we all know iphones can't send mms so it registered into their system that i was using an iphone thereby causing the iphones imei to register to my number hence why it's forbidden to send/receive a mms. did you perhaps do something similar?
ATT0001 file can't open it
Hey Guys... sorry than I can't help to solve your problem.. But i have a problem too with the MMS... what happens is that every time I send or receive a mms to a windows mobile phone comes as ATT0001 file and I can not open .. I need help with this thanks
Loner2DEnd: I did but only to unlock one. I've done this before and have never had that problem up. I only noticed that I wasn't able to send/receive MMS after I had the official update from HTC for the FUZE. I was on the phone with the tech and they told me that using my SIM in an iPhone wouldn't have updated my account. You can log onto your online account with AT&T and see what phone/IMEI is registered with your account. Mine still has my FUZE and correct IMEI. Everything is working now that I reflashed the original shipped ROM with the 1.02.25.32 Radio.
I downloaded another copy of the ROM update from HTC for the FUZE and ran the same tests to see if maybe it was a corrupted file/bad flash and I still had the same issues with MMS. My internet still worked but I got the same Forbidden Error. For now, I'm going to just stay with my current (original shipped) Radio since everything's working.
Dannyedilber: I'm not familiar with that Error. Sorry man. I don't know much about MMS and had to do some homework and some trial and error to finally find this solution. Maybe one of the seniors can answer your question.
I've had this problem a few times but usually fixes itself after a reset or a quick disconnect/reconnect of the radio.
I find that if I leave my data on for an extended period of time, it seems to happen. Almost like AT&T is seeing the high traffic and cutting me off.
Also check to make sure you guys don't have Data disabled in your accounts.
@Dannyedilber: I don't even know what an "ATT0001" file is?
@Loner2DEnd: My wife just returned her iPhone because she said it sucks compared to Windows Mobile (smart girl eh?) and went back to her old Samsung Blackjack. We did this yesterday, after her having the iPhone for a little under 30 days. I just sent her a picture and she got it.
From AT&T
The data network works for all of our devices and the Windows Mobile devices are the only ones that seem to have had some issues with the way the data network is configured. Rather than trying to re-configure and potentially break the network for other users, we have been working on a fix for the Windows Mobile issue. We have a fix that will be implemented by the end of this quarter and we should have the problem resolved at that time.
Click to expand...
Click to collapse
From AT&T
Just wanted to let you know that I did get an update. The project to "fix" the 403 error is moving forward. Right now we plan to have the implementation complete in June with Project closure in Early July. I will follow up again in about a month to see the status and provide closure information.
Just for clarification: This project hasn't slipped a month, we keep the project open during a "soak" period to ensure that everything is going as expected. Also, as we apply the fix to the elements in the network the fix will be applied to certain markets and complaints should drop for that market dramatically. I haven't seen this issue in a while here so I believe that the patch has been applied for the Minneapolis market.
Click to expand...
Click to collapse
An easy temporary fix is to put your phone into flight mode and then take it out. A new data connection almost always works. Worst case scenario soft reset the phone.
so its by market then?
I flashed the new rom about last week, had no issues receiving and sending MMS on it and on NATF's 4.7 rom.
Still No MMS
nmbr6 said:
...An easy temporary fix is to put your phone into flight mode and then take it out. A new data connection almost always works. Worst case scenario soft reset the phone.
Click to expand...
Click to collapse
My MMS is not working incoming or outgoing. I have tried it from TF3D2, Titanium, after reset, after airplane mode and reset with no success. I put my SIM card in my backup phone and MMS send and receive worked flawlessly. I do not get the forbidden error message some of you have gotten; it just does not work. I have reset the RegEdit keys several times and they are currently set at 1.2mb. I know that 6oo K is at&t max, but the two test MMS messages are 77K and 317k. Thanks - David.
Black C5 said:
My MMS is not working incoming or outgoing. I have tried it from TF3D2, Titanium, after reset, after airplane mode and reset with no success. I put my SIM card in my backup phone and MMS send and receive worked flawlessly. I do not get the forbidden error message some of you have gotten; it just does not work. I have reset the RegEdit keys several times and they are currently set at 1.2mb. I know that 6oo K is at&t max, but the two test MMS messages are 77K and 317k. Thanks - David.
Click to expand...
Click to collapse
It sounds like you have a different issue altogether. My posts were answers from AT&T strictly for the 403 forbidden issue.
Player911 sorry that I was not very specific...whats happening is when I send a ATT MMS to someone who have a HTC touch pro to her hotmail account.. she can't open it because the picture come as ATT0001.. even when I send att MMS to myself at my email account I receive as a ATT0001
Need help with this guys.. please
Sorry my english
Hi All:
First off thank you for the info in resolving this issue. Since swithing back to the original shipped ROM with radio 1.02.25.32 then flashing EnergyROM 3.0 Phoenix 6/12, I've had no problems with MMS Forbidden Error. It's been a week now and I've had no data/network issues either. I'll try again with the new Radio/ROM this weekend when I have some free time and will report back. Thanks everyone!
Tru using a registry editor and go in and change the registry in Arcsoft under HKLM>Software>Arcsoft>Arcsoft MMS UA>Config>MM1>MMSCSetting>SampleMMSC>Wap1SendDefault and Wap2SendDefault and change to a desired number. For instance, I have 102400 set to send up to 1MB.
See if that allows you to send.
try enabling ATT's proxy. This always works for me.
1. Enable the proxy
2. Kill the data connection
3. Reconnect data
4. Try sending or receiving.
This has worked countless times for me.
ok well as the topic says lets try to put a stop or atleast minimize the MMS Forbidden error alot of ppl been experiencing, including myself.
It seems like the MMS Forbidden error is more radio related than the actual internet settings or registery tweaks.
My reason for saying this is that my previous phone before i got it exchanged earlier this week had Radio **1.12.25.19** i also had Premier Series Rom installed by xECK29x and my MMS was not working no matter what tweaks or cab i install, both incoming and outgoing MMS was broken.
but as i got my new phone from att i installed back over my Rom and kept the stock Radio which is **1.02.25.32** which seems like to be the latest radio by AT&T and my MMS worked great even with the latest Premier Series Rom 3.1.
Only thing that seems to be a bit of a problem is my GPS is not as strong as my previous phone which apperently 1.12.25.19 Radio had Fix.
I have read and been keeping track where other ppl have flashed new radio and have had problem with MMS and flashed back to stock ATT and have MMS restored, is there something within the ATT radios that we are overlooking, is there a way to incorperate the new radios with the old ATT ones and keep both MMS and Fast Lock AGPS??
allthatinny said:
ok well as the topic says lets try to put a stop or atleast minimize the MMS Forbidden error alot of ppl been experiencing, including myself.
It seems like the MMS Forbidden error is more radio related than the actual internet settings or registery tweaks.
My reason for saying this is that my previous phone before i got it exchanged earlier this week had Radio **1.12.25.19** i also had Premier Series Rom installed by xECK29x and my MMS was not working no matter what tweaks or cab i install, both incoming and outgoing MMS was broken.
but as i got my new phone from att i installed back over my Rom and kept the stock Radio which is **1.02.25.32** which seems like to be the latest radio by AT&T and my MMS worked great even with the latest Premier Series Rom 3.1.
Only thing that seems to be a bit of a problem is my GPS is not as strong as my previous phone which apperently 1.12.25.19 Radio had Fix.
I have read and been keeping track where other ppl have flashed new radio and have had problem with MMS and flashed back to stock ATT and have MMS restored, is there something within the ATT radios that we are overlooking, is there a way to incorperate the new radios with the old ATT ones and keep both MMS and Fast Lock AGPS??
Click to expand...
Click to collapse
I was having the same problem with mms, forbidden error, and I called AT&T who told me that I had a weak signal on my line and they needed to resend the signal. After the signal was resent my mms worked without any problems and my GPS locks is much faster.