Good Morning i'm a new member of this amazing forum...
I have to upgrade my htc oxygen to WM 6.1 but i have never done it.
How i can do it?
1.First you have to download Hard-SPL from here and the WM6.1 ROM from here.
2.The second thing to do is to extract the content from both archives. You need WinRAR or any other archiver that supports .rar si .7z file extensions. If you don't already have it you can download WinRAR from here
3.Now you have a folder hspl and a file called RUU_signed.nbh. Copy spl.nb, spl.lnk and jumpspl.exe from the hspl folder to the root of your phone. Disconnect the USB cable from the PC. Enter any explorer from your smartphone and place the cursor on the file called spl.lnk (which you just copied in the root of your phone) but don't open it. Hold the camera button and then push to run spl.lnk. Your phone's screen will turn white.
4.Connect the USB cableto the PC.
5.In the hspl folder you have another folder named flasher. From the flasher folder run ROMUpdateUtility.exe and follow the instructions to flash Hard-SPL on your phone. After this step your phone will restart itself and you'll be able to install any ROM
6.Now take the file RUU_signed.nbh[40.1Mb] which you previously downloaded and copy it to the folder flasher over the one that is already there.
Lucky number 7.With your phone connected to the PC through the USB cable run from the folder flasher ROMUpdateUtility.exe and follow the on-screen instructions to install WM6.1. Wait until your phone will restart and you'll see something like this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enjoy !
I've been watching these forums for about a month now, and I finally decided to upgrade my Oxygen to WM6.1. I managed to download two WM6.1 roms and tried to upgrade my phone. But for some reason when I hold down the camera button and run spl.lnk, then nothing happens. I've tried three different file explorers and no luck.
Anyone know what I can do?
The same happend to me until I did an application unlock, then every thing was smooth.
search for the application unlock.
nothing happens when i run spl.lnk
http://forum.xda-developers.com/showthread.php?t=396027
guigoui said:
http://forum.xda-developers.com/showthread.php?t=396027
Click to expand...
Click to collapse
ok now i can see the white screen but when i connect my htc to the pc activesync doesn't recognoze my mobile and i have to estabilish an activesync connection with my smartphone for flash how can i resolve?
(activesync says that there isn't connection)
colataroc said:
ok now i can see the white screen but when i connect my htc to the pc activesync doesn't recognoze my mobile and i have to estabilish an activesync connection with my smartphone for flash how can i resolve?
(activesync says that there isn't connection)
Click to expand...
Click to collapse
oh yes I am successful
Fantastic & simple
Thanks a lot, the guide is very simple worked at first go !
Great work
@colataroc
I have the same problem, how did you resolve it?
please help
1- You'd have to download this file HTC.Device.Software.Unlock.zip and Appl Unlock your phone. (copy the files, that you had extract, in the root of your phone, then execute all 3 files in numerical order. )
2- Download hspl.7z and Copy spl.nb, spl.lnk and jumpspl.exe to the root of device, hold camera button and launch spl.lnk - you`ll see the white screen.
3- Download http://rapidshare.com/files/11445779...genUpdate1.rar and upgrade your phone using the Flasher included in the archive you downloaded in step 2.
Related
So i made a mess of this!
I initially followed this to install the SW version of the jiayu S3 stock rom.
http://www.spemall.com/forum/topic/2160-how-to-install-international-rom-for-jiayu-s3-basic-and-jiayu-s3-advanced/
Nothing happened until I started playing around with the drivers. Then I got about 2% into the process and the flashtool crashed.
Now every time I try again I get this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I can't turn on the phone anymore, it lingers in the Jyaiu screen but it charges and I can get into recovery mode.
Also, like an idiot, I did not make a backup.
I am thinking it has something to do with the drivers as the flashtool is unable to communicate with the phone, but I have no idea how to fix it!
Can someone please help me?
Fixed it! Here is a tutorial!
I installed the international rom for the Jiayu S3.
If you don't have gapps and/or your calendar and gmails apps do not sync. This will fix everyone of those issues.
I came across a lot of problems as windows, for some reason, it does not like the Jiayu drivers so the first time I flashed the device windows switched it off and corrupted the rom install. I was stuck with a phone that would not boot, it was just suck in the Jiayu logo.
FYI my phone would go into recovery mode!
I got it fixed eventually. This is what I did:
Before following the install instructions below:
On the phone go to settings, security:
- enable superuser and unknown sources
- disable verify apps
1. Format computer (you may now have to if you have not yet connected your phone to your pc. If you did, try using a different USB port)
2. Download the drivers from here and unzip onto desktop
http://thebroodle.com/microsoft/windows/how-to-install-mtk65xx-preloader-usb-vcom-drivers-in-windows
3. Connect the switched on phone to the PC (via USB) and windows will install some drivers
4. Once install finishes disconnect phone from pc
5. Turn phone off
6. Open pc device manager
(right click on computer, click on manage. New window will open, on the left side of the window double click on device manager)
7. Turn on flashtool
(follow this tutorial and use their tools: http://www.spemall.com/forum/topic/2160-how-to-install-international-rom-for-jiayu-s3-basic-and-jiayu-s3-advanced/) and press download
8. Go back to device manager window
9. Connect switched off phone to PC via USB
10. Go to device manager and wait for MTK65XX to appear under other devices
(this only shows up for a few seconds so keep a close eye on it) - if you miss it, disconnect the phone from PC and start over!
11. Right click on MTK65XX
12. Select update driver
13. Click on Browse
14. Select USB driver folder (downloaded from the above website)
15. Click ok
16. Windows should have now installed the correct drivers
17. Flashtool will start working straigt away (first the bar at the bottom of the flastool becomes green, then red, then purple then yellow with a % progression)
18. Go for a coffee
19. Wait until you get a big green tick on the screen
Flash complete and phone is working! Sigh of relief and curse windows repeatedly
You need three things besides your phone:
You lost data/wifi when flashing a CM UPDATE, this is your fault for not reading the threads, The FIX IS BELOW, in simple, plain english, easy to understand. DON'T MAKE ME DRAW PICTURES
1) Android SDK
https://developer.an.../sdk/index.html
Download it and install it. I'll only describe it for Windows OS.
2) The correct ROM
https://download.cya.../?device=enrc2b
or from my CM-12.1/AOSP threads
Download it and open it with WinRAR or Winzip or just unpack the whole thing. Directly in the root folder you'll see a file called boot.img
3) USB Cable connection between the phone and your PC
Connect the device to your PC. On your phone go to settings and enable USB debugging.
Now you are ready to flash the boot image.
a) copy the boot.img to the same folder as fastboot
if you downloaded the package from above, you'll see a folder structure that is a bit overwhelming. Navigate to
C:\adt-bundle-windows-x86-20140702\sdk\platform-tools
and copy the file called boot.img from the ROM there.
B) open up the terminal
click on start and enter cmd.exe
enter the folder with
cd /
cd C:\adt-bundle-windows-x86-20140702\sdk\platform-tools
c) start the flashing
Now type:
adb reboot bootloader
or alternatively, restart your phone manually and press the buttons Power and Volume down until you see a white menu screen.
Now type:
fastboot devices
and you should see your phone
d) flash the boot.img
type:
fastboot flash boot boot.img
That's it, 3G and WiFi should work now. A more extensive How-To can be found here:
http://wiki.cyanogen...l_CM_for_enrc2b
Taken from my thread of the same title from the CM forums
http://forum.cyanogenmod.org/topic/101207-no-wifi-no-data-read-this/
IF YOU CANNOT FOLLOW THOSE SIMPLE INSTRUCTIONS GIVE UP NOW
Hi @Lloir,
as far as i can see you have removed the aosp5.1 thread, right? that means no work from you for one x+ anymore?
now i also see that there is no one x+ in your signature...
mmm...bad news...
is it just because of the newbies and there stupdi questions? the best way to get rid of them is to ingore them!!!
.
el-Loko said:
Hi @Lloir,
as far as i can see you have removed the aosp5.1 thread, right? that means no work from you for one x+ anymore?
now i also see that there is no one x+ in your signature...
mmm...bad news...
.
Click to expand...
Click to collapse
My X+ is dead and I'm now mostly working on Huawei devices.
shhh....ititit :'(
.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey,@ Lloir
Ive tried this for my stock ROM that ive reverted to after having cyanogenmod 11, but it didnt work, I used the same boot.img from the firmware.zip. it did work successfully when reverting to cyanogen after it didn't work though.
What have I missed?
Any help would be appreciated.
Hello my question is how to downgrade my samsung j330f from android 9 pie to 7 nougat ?
I try all firmwares with odin but bootloader on my phone sad device 4, binary 3 . How to solve that .
how to do this downgrade ? Can anybody help me ? must be some way...
On odin sad FAIL
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
did you ever figure out how to?
Step 1: Enable USB Debugging
The first thing you need to do is turn on Developer Options on your phone by going to Settings, finding the About phone section, and then tapping the Build number until you get a message that says You are now a developer!.
Next, go into Developer Options and enable USB debugging and OEM unlocking.
Step 2: Connect Your Phone to Your Computer
Connect your phone to your PC with a USB cable.
On your PC, navigate to the location where the SDK Platform Tools folder is saved and put the Android factory image you downloaded there. Factory images usually come in ZIP files that contain IMG files; unzip the factory image right there in the Platform Tools folder.
Now, while still in the Platform Tools folder, hold Shift and right-click inside the window, and then select Open PowerShell window here.
In the PowerShell window that opens, type adb devices to check if your phone is being detected. If it is, you should see its serial number listed. If not, try using a different USB cable.
Step 3: Unlock the Bootloader
Once your device is in fastboot mode, now it's time to unlock your phone's bootloader. This is a crucial step as without unlocking the bootloader, you can't install the previous version of Android on your phone.
Depending on your device, type fastboot oem unlock, and if this doesn't work, type fastboot flashing unlock instead. If everything goes well, you should see a confirmation on your device that the bootloader is now unlocked. This step will also wipe your device.
Step 4: Install the Older Version of Android
Some manufacturers will include a "flash-all" script as part of the downloaded factory image that will automatically flash everything for you. If this is the case, the script should be in the SDK Platform Tools folder along with the IMG files you extracted.
Now, double-click on the flash-all.bat script. A box should pop up showing you the flashing process as it happens. Please do not unplug your phone during this process!
Your phone should now restart. If everything went well, you should now be running a downgraded version of Android. You'll need to set your phone up again from scratch.
Greetings,
J Wick
My Duel2 was stucked at FastBoot after using RSA yesterday..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This worked on my Duel 2 - GLOBAL (12.5.188ST)
ROM downloaded from:
romprovider.com/lenovo-legion-2-pro-firmware
(theres also a EEA ROM you can download)
Or you can download your ROM from the RSA app by entering your IMEI
Heres what I did:
*Install Qualcomm USB Driver
(Https://gsmusbdriver.com/install-qualcomm-usb-driver) then restart PC
*Install QPST 2.7.496
(http://qpsttool.com/qpst-tool-v2-7-496)
After installing qpst, locate its folder on your pc, mines on C: Program Files (x86)/ Qualcomm/ QPST/ bin... then open the QFil file in the bin folder.
On QFil:
*select Flat Build
*On the Programmer Path, click Browse, select where your extracted ROM folder is, then select " prog_firehose_ddr.elf " file then click open.
*Click Load XML, and select ALL .xml files
*Select ALL patch
*on your powered OFF Duel 2, press & hold POWER, +VOL, -VOL simultaneously, when the Legion Logo flashes, plug your USB cable on the Left side Type-C port
*On QFil, click Select Port and select your Phone if it doesnt automatically selected when you plug it.
*Click DOWNLOAD
"The QFil app on the QPST folder fixed the error The system cannot find the file specified"
Hope this helps
i was stuck in fastboot for the last 2 days. the backup i had saved using miracle thunder box didnt work and neither did this. But it got a lot further in the boot sequence before resetting lol. So i took the backup i had of my phone, fastboot flashed the persist image over and it booted right up. not sure if it was just coincidence but it reset 3-4 times on me before flashing the image over. Doesnt help those who are already screwed but helps others prepare before attempting an update
ฉันลองทุกขั้นตอนแล้ว แต่ไม่ได้ผล โปรดช่วยฉันด้วย
thank you that was really helpful i didnt know about select all i was selecting 1 after another thank you again for the detailed steps
A. Unlock bootloader
Download, extract and install Fastboot driver to PC: Download here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Go to setting >> Devices info ( about phone, my devices) >> Version > Build Number (Click 7 - 8 times )
2. Back to setting > Addtional setting > Developer Options > Turn On OEM Unlocking >> Turn On USB Debugging
3. Install Minimal-adb-and-fastboot toPC/Laptop (Windows) : Download Here
4. Conect Phone to PC. Select "File transfer/Android auto"
5. Open "Minimal-adb-and-fastboot" enter "adb devices"
6. Check phone "Click Allow"
7. Enter "adb reboot bootloader"
8. Enter "fastboot flashing unlock"
9. Pres "Volume Down" select "unlock the bootloader"
10. Active phone skip all step
11. Disconect phone to PC
11. Follow step 4 - 7
Now FASTBOOT UNLOCKED
-------------------------------------------------------------------
B. Convert Global ROM
1. Download and Extract Global ROM:
ace2_11r_global_os_13.1.0.540_a40.zip: Download Here
2. Run "Flash_all.bat"
3. wait processing
4. done
Thank you dear. Sir my OnePlus ace2 on oxygen 13.1 wanna get back to color os 13 so i need a safe tutorial way to flash my device. So could you please explain that.
my phone got stuck in logo/fastboot loop after running flash_all.bat.. do you have fix? I already tried twice but still the same
oneplusUser11 said:
my phone got stuck in logo/fastboot loop after running flash_all.bat.. do you have fix? I already tried twice but still the same
Click to expand...
Click to collapse
the same bro
My phone won't turn on after running flash_all.bat
Now I cant find anything to restore my phone
i managed to fix this guys. download rom (idownloaded oxygen) from here https://androidfilehost.com/?fid=4279422670115733665
From the folder that you downloaded above
delete the files inside images and paste the ones from the link I shared and run flash_all.bat again.
What are the advantages and disadvantages of the global ROM compared to China's ROM? 全球版有什么优点和缺点?
oneplusUser11 said:
i managed to fix this guys. download rom (idownloaded oxygen) from here https://androidfilehost.com/?fid=4279422670115733665
From the folder that you downloaded above
View attachment 5932629
delete the files inside images and paste the ones from the link I shared and run flash_all.bat again.
Click to expand...
Click to collapse
Did you succeed or still you device on bootlop
Has anyone successfully installed OxygenOS rom from ColorOS China? why do i see all the bricks?
không làm theo, ăn gian, hư máy