Hi,
Everything in AP4 has been running perfectly but then today I installed TomTom and mucked around with the GPS settings (hardware ports etc) and now when I try to launch Opera it starts to boot and then disappears. Are these related? Did I break something?
Also media player doesn't run anymore which may be an AP4 bug bt it was working fine.
Does anyone have any suggestions as to what I should do? Is it possible to uninstall and reinstall?
mactablet said:
Hi,
Everything in AP4 has been running perfectly but then today I installed TomTom and mucked around with the GPS settings (hardware ports etc) and now when I try to launch Opera it starts to boot and then disappears. Are these related? Did I break something?
Also media player doesn't run anymore which may be an AP4 bug bt it was working fine.
Does anyone have any suggestions as to what I should do? Is it possible to uninstall and reinstall?
Click to expand...
Click to collapse
Its best not to double post dude or you get flamed, however ive answered you in your other post.
Jay
Related
i would liketo buy it
but it does not say its compatible with Tytn/Hermes
actually what the story inside?
It´ll work fine.
You just need to know that the buttons ONLY work for WMP (and HTC player....).
So If you use TCPMP or another player, the remote is useless. You will still get audio though. But if it´s just the audio you want, there are much cheaper solutions that work.
greetz,
Pfeffa-rah
Pfeffa-rah said:
It´ll work fine.
You just need to know that the buttons ONLY work for WMP (and HTC player....).
So If you use TCPMP or another player, the remote is useless. You will still get audio though. But if it´s just the audio you want, there are much cheaper solutions that work.
greetz,
Pfeffa-rah
Click to expand...
Click to collapse
Unfortunately my Vodafone V1605 don't recognize it! I've downloaded and isntaled the RC W100 driver from the official HTC Site, but it don't work with WMP... the answer button don't make any effect...
I use the Schap's Rom 4.31... perhaps i must change the rom?
I've a Wired Remote Controller dopod S1 bought to ebay.
Unfortunatelly my Tytn don't recognize this rc-w100... exist a full working driver for TYTN alias Hermes????
I've downloaded the official driver and i extracted and installed "manually" all the singular cab files!!!!
The results is listed above:
all the Remote_controller_Y-cable_Ax files, the Y-cable_B1_070323 and the Y-cable_E1_070323 and don't works and they produces a blank screen after the reset (so i have made an hard reset everytimes!)
Remote_controller_P1_070316.cab and the Y-cable_HERM1_070316.cab don't make any changes and the rc-w100 isn't recognized at all!
Remote_controller_AT1_070316.cab mute all the sound alsoo if i disconnect the RC-W100
Only with Remote_controller_Y-cable_T1_070316.cab the RC-W100 is recognized as a simple headphone
SO DON'T EXIST A FULL WORKING FUC***NG DRIVER!!!????
i'm desperate...
note:sorry for my baaaad english
Pfeffa-rah said:
It´ll work fine.
You just need to know that the buttons ONLY work for WMP (and HTC player....).
So If you use TCPMP or another player, the remote is useless. You will still get audio though. But if it´s just the audio you want, there are much cheaper solutions that work.
greetz,
Pfeffa-rah
Click to expand...
Click to collapse
Pfeffa-rah, what other cheaper solution that u are talking about? I am interested.
Thanks in advance.
7wolf said:
Unfortunately my Vodafone V1605 don't recognize it! I've downloaded and isntaled the RC W100 driver from the official HTC Site, but it don't work with WMP... the answer button don't make any effect...
I use the Schap's Rom 4.31... perhaps i must change the rom?
Click to expand...
Click to collapse
Hi, Could you send me that W100 remote driver as I cannot find it. I have x2 tytn ii and it works on one and not the other... Thanks, J
w100
yeah i could do with that driver too.
E100 Driver cabinets, anyone?
Just got this POS today-when I plugged it in to a stock WM6 TyTN ROM, it didn't do squat-no work at all-no sound to the phones even!
I rooted around and found the remote_controller_Y_cable_T1_070316.cab and dropped it in-now I get headphone sounds at least, but everytime I try to launch the installer It says I have the latest drivers-and I can't seem to catch the thing at the point where I can snap up the cabinets.
Can someone post the other cabinets?
wazmo said:
Just got this POS today-when I plugged it in to a stock WM6 TyTN ROM, it didn't do squat-no work at all-no sound to the phones even!
I rooted around and found the remote_controller_Y_cable_T1_070316.cab and dropped it in-now I get headphone sounds at least, but everytime I try to launch the installer It says I have the latest drivers-and I can't seem to catch the thing at the point where I can snap up the cabinets.
Can someone post the other cabinets?
Click to expand...
Click to collapse
Never mind-I got 'em all by doing an install on my XP laptop with my device disconnected.
Who sez XP is junk?
Driver
Can someone put up the driver for the rc-w100? Couldnt find one on the official site. Tried googling but its nowhere to be found. Bought it on ebay, checked the "compatibility list" and my VOX is there. This kinda sucks.
Try htc music plug-in 1.0, I install it then my rc E-100 worked!But you can't use it with a Y cable.
hykq said:
Try htc music plug-in 1.0, I install it then my rc E-100 worked!But you can't use it with a Y cable.
Click to expand...
Click to collapse
Too late-I returned it.
But thanks for the heads-up-maybe someone else will use your info.
HTClugin?
Hi, any chance u can upload ur version of the plugin? thx
Where can the htc music plug-in 1.0 be found ?
Yeah, same question. I've just bought W100 and it's not woring on Schap's 4.31 ROM. Ideas.
download for the driver,now missing in htc support this fix
plese upload this file!!!!!!!!!!!!!!
I cant use RC E100 on my herm100. There is no any sound on ;-(
Any solution?
W100/E100: HTC's Achilles Heels
Don't buy those remote controllers.
Simples!!!!!!
THis file will enable you to listen to music, buttons doesnt work though... Is there anyone who has an idea how to make the buttons work?
Hey all,
I have been using my Eris with a bluetooth Stereo for a quite a while, but when I rooted the phone over to a 2.1 ROM it started using Simple Secure Pairing (SSP) when authenticating the bluetooth headphones. My car stereo doesn't support this (its brand new too...).
So, the question is has anyone ever looked into disabling SSP and forcing it to use the old static key method of pairing in 2.1?
I am not adverse to diving in and doing the dev work, I just wanted to make sure someone hasn't already done it. If I do need to dive in does anyone know if its possible to disable it via a config file, or will I need to backport the bluez stack?
Thanks for all the great work,
traetox
I too am having this issue. Worked fine in 1.5 but ever since root it will play audio through pioneer head unit but phone won't connect. I will patiently await a fix.
-------------------------------------
Sent via the XDA Tapatalk App
Oh, so that's what's up.
I'm having a similar problem with my Jabra Cruiser bluetooth speakerphone/FM transmitter. What mine does, though, is it will connect and I can use it to listen to music and do the normal speakerphone functions like it normally would, but none of the media buttons will work anymore. It's not a huge inconvenience, since I mount my phone in the car anyway (long commute). It's only a problem if I need to have Google Navigation in the foreground but still want to change songs.
Patiently waiting. You devs are awesome, if you don't get enough sycophantic slobbering already.
ok, so I did some digging on mine and it turns out that I can pair with a simple bluetooth headset via the '0000' key. But the phone attempts to go through the full key negotiation to connect the "bluetooth headphones." So i can get audio via the headset negotiated connection, but it sounds awful without full AD2P.
I am getting a ROM kitchen setup and will try and map the 1.5 bluez stack onto the 2.1 source and see where that gets me.
Thanks for the input.
Thanks for working on this! I've tried to incorporate some of the Bluetooth files as well as the WLAN.ko from other roms into my Rom but have been unsuccesful. I am running damage control 2.08 that I ported. I was originally unable to get WiFi or Bluetooth to work until I copied the WLAN.ko from the oc patch now both work minus the phone. Don't know if this helps but figured i let you know. If you have those files from a 1.5 Rom I will try them in my port and let you know what the results are.
-------------------------------------
Sent via the XDA Tapatalk App
bt issues as well any fix
I have posted several times on this can not get an answer Have the same issues anyone with experience know what I can do?
Here is my situation I have driod eris ee2.1 on verizon before root I could auto connect bt to my pioneer avic d3 with phone audio only I had to manually connect media audio every time but I got used to it but since root I now can connect to media audio only and when I try to connect phone audio it dissconnects in less than a minute I am at a loss as to what to do thought maybe someone has experienced this and figured it out Thanks in advance.
suppliesidejesus said:
Oh, so that's what's up.
I'm having a similar problem with my Jabra Cruiser bluetooth speakerphone/FM transmitter. What mine does, though, is it will connect and I can use it to listen to music and do the normal speakerphone functions like it normally would, but none of the media buttons will work anymore.
Click to expand...
Click to collapse
I have a Jabra Crusier, and I'm having an issue with a lot of ROMs where I can not connect to it and stream music over bluetooth. I have found that Aloysius v6 Maps rom by Spencer Moore works well with the bluetooth thing. You may have to connect and disconnect a few times here and there to get it to connect, but it's been the best ROM for it. I used V11 Maps and it worked for a little while, but stopped connecting properly just recently.
There are a few known bugs with v6, but I'm fiddling with V11 to try and get the bluetooth to stay perm. Once I get it, I'll let Spencer Moore know and get him any new updates I come across.
Just an update. I am able to pair and connect to phone using white widow Rom.
-------------------------------------
Sent via the XDA Tapatalk App
Hi All
I've got the HTC Leo (radio 2.06.51.07). I'm having a problem with the Bluetooth functionality.
My car has the Ford Microsoft Sync capability in it. The phone is troublesome, the music player (via A2DP) won't change tracks from the car interface, only works sometimes. The play button doesn't always work either..it works fine provided I change tracks via the phone interface. I have tried a soft reset and hard reset.
I want to try another radio version ( I think this is related to the Bluetooth, right?). Do I need to reinstall my ROM everytime I do this or can I do it on the fly?
Also, which radio versions will work with my ROM version? (1.66.405.2 (766410 WWE)
I just wanted to say i have the EXACT same problem as you with my Nissan nav system + bluetooth. The phone connects within 10 seconds or so after starting the car, but getting music to begin playing is a real chore and behaves as erratically as you described. Often I'll lean on the FF/RW keys to force it to shuffle, then hit pause or play and it will just start working all the sudden. Once it is going I can choose songs just fine, but if I try to pause good luck getting it unpaused.
Yes that's the same thing I'm having.
I noticed today that if I remove the phone from the sleeve (the leather pouch we were supplied with the phone) it seems to work more often?
I notice that with my bluetooth headphones, if the phone is inside my jacket pocket, the bluetooth reception is really crap... the music starts to cut out as its playing.
I wonder if it's something to do with the reception or bandwidth available over A2DP? Maybe I'll drop the sound quality of the A2DP right down and see if it works better then.
i had similar problems trying to connect the phone to my parrot hands free kit in my car (i still havent got it to work). try radio 2.11, its not the latest but seems to be the most stable. you with have to install hard SPL on your device, but wont have to re-install the ROM. after that give it a try, if you still have issues, have a look at tweaking the bluetooth settings through an app called hd2tweak. there is a section called bluetooth which has a few options you can change, you may need to increase the bitpool. also check that you have added the bluetooth device on the phone and that it is an authorised device and the incomming connections are accepted (this is in the standard bluetooth options). also try disabling SAP (SIM access) and see if that helps, i have to have this disabled to use my blueotooth headset, no idea why though
Is your Bluetooth always visible turned on?
If not, slide over to the settings tab and select all settings from the menu. Select the Bluetooth icon and it will ask if you want to turn Bluetooth on, tap yes. A screen will appear with the settings button in the upper left corner, tap it. A menu will appear, select the discoverable entry (the binoculars) and make sure the always visible radio button is selected. That should do it. Before making this change, the pioneer Nav. system in my car was having difficulty finding the phone. Since the change everything has worked just fine. I hope this helps.
111Kestrel said:
If not, slide over to the settings tab and select all settings from the menu. Select the Bluetooth icon and it will ask if you want to turn Bluetooth on, tap yes. A screen will appear with the settings button in the upper left corner, tap it. A menu will appear, select the discoverable entry (the binoculars) and make sure the always visible radio button is selected. That should do it. Before making this change, the pioneer Nav. system in my car was having difficulty finding the phone. Since the change everything has worked just fine. I hope this helps.
Click to expand...
Click to collapse
Hi thanks for the hint... I checked and it is set to always visible but I can see how that could have affected it! Thanks anyway
matthewharmon102 said:
i had similar problems trying to connect the phone to my parrot hands free kit in my car (i still havent got it to work). try radio 2.11, its not the latest but seems to be the most stable. you with have to install hard SPL on your device, but wont have to re-install the ROM. after that give it a try, if you still have issues, have a look at tweaking the bluetooth settings through an app called hd2tweak. there is a section called bluetooth which has a few options you can change, you may need to increase the bitpool. also check that you have added the bluetooth device on the phone and that it is an authorised device and the incomming connections are accepted (this is in the standard bluetooth options). also try disabling SAP (SIM access) and see if that helps, i have to have this disabled to use my blueotooth headset, no idea why though
Click to expand...
Click to collapse
Thanks for letting me know, I'll give that a go and post the results back. I upgraded the Radio to 2.10.50.28_2 a few nights ago, that didn't seem to make much difference, I'll try the 2.11 (if I can find it!)
Ok I think I have figured out whats going on here. It's the sense player at fault. I switched to windows media player and let it import all my tracks/playlists, and it plays the songs 100% perfect without delay every time. I can even get more track info on the nav screen, like album etc. Pause/Play/Skip work flawlessly.
I CAN'T BELIEVE IT!! You are absolutely right!
It works like a dream now. I wonder what the hell it is that is different in the HTC sense player?!
Does anyone know why the HTC sense player ignores some commands but answers others?
I've got a BT head in the car which works fine with WMP, but I'd rather it was able to control S2P.
Is there anyway to do this on the HD2?
I've tried T-Back 6.5 BT Driver but it's made no difference.
i don't have an answer, but i'm in the same boat as you. I'd love to use something else instead of wmp. I hope there'll be a fix soon, otherwise I think I may have to look for another phone. I can't stand how, with wmp i can't even fast forward and rewind, i know it's possible, but with the hd2 that's not even working.
also, would anyone know if this is a phone-related issue or the rom/OS; i'm wondering if I switch to Android that this problem would be solved. thanks.
Hello,
i have some problems with my s2. When i connect my s2 to my car-radio with bluetooth i have on again off again some "short breaks". So as the s2 make something and the cpu has not enough power and thats why it hangs. But i can´t see that something is working in the statusbar. And i don´t think that the s2 has not enough power to play mp3s.
Perhabs this is beause an app? But what app?
Does someone have also this problem?
Many thanks
Best regards
Tom
Up
Nobody has this behaviour too?
did you resolve this problem?
Unfortunally not. I have tried everything:
- tried every music player in the andoird market.
- deinstalled apps which are running as a service (which i found...)
- and at all: made a (hardware-) reset to the sg2 - so all programs and settings are set to the standard-settings. so i made no settings - only for bluetooth. Now i tried the standard-music-player and its the same problem. I think this is a "bug" or problem in android-os or in the sg2. That have nothing to do with an app.
Thank you very much
Best regards
Tom