ok i just got a vpa compact 3, with herms 200.
its running wm6.1 custom, in the setting/system/connections tabi have an externat gps settings, when entering that i have the elusive com 9, can someone explain how i can configure this to be used with tomtom 6, as i also have this program.
G'day, when you 1st start tomtom it will take you through a setup prcedure. Miles or kilometres, time, etc.... It will also ask what type of gps receiver to use and after selecting you can choose what com port....
BUT first... I find it easier if you go to com manager (afte 1st disabling external GPS settings) and pairing gps receiver manually, then after it pairs, tick serial port. Go to comm ports (at bottom of bluetooth menu) and create a new one. It should list your GPS receiver.. Pick whatever com port you wish (please note that com 3 is "unavailable"). I use com port 4 with a lot of success.
Hope this helps...Cheers...
Related
With PC2002, WM2003 and WM2003SE I had always the COM5 and COM6 ports for bleutooth. Now within WM2005 there is no longer the COM5 port. This port is nessesary when you want to connect to another device with bleutooth. In both version of WM2005 on this forum COM5 is gone. Does anyone know if this is a bug? Can we get it back or do we need to connect to a bleutooth device in another way?
That's what I did to solve my missing bluetooth port.
settings
Connections
Bluetooth
COM Ports
New Outgoing Port and follor the instructions.
I haven't been able to use The GPS settings in the System Tab... I have not tested fully to be sure that I can't though.
I have paired my BT GPS and checked the box to use a serial port. But which port is used? I looked into the registry and I cannot find anything. Normaly it should use COM5. But this one is no longer available on the device. I think whe should try to copy the registry setting of WM2003SE to WM2005 for the COM5 port.
The new GPS tool should do something like GPSgate. When you select COM0 on the first tab, marks that this port is used. GPSgate tell me that COM0 is not available. When I remove COM0 and select none, the COM0 port is again available for GPSgate. The problem is that COM0 is not defined as a COM port. You cannot select it. This makes the new tool unusable at the moment.
On tab 2 you have to select the COM port of the GPS. Strangely all the COM ports are available. Also COM5. What does that mean.
I have alse defined on the new third tab of the MS bleutooth settings that the outgoing BT trafic should use COM5 for my BT GPS. Nothing works. Does anyone know how to use the new functionality?
Just got a TomTom5 kit with Bluetooth GPS receiver from PDAMods.com.
Followed the instructions to set everything up, but TomTom still says "No GPS device!".
The XDA seems to connect via BT to the device OK, and the BT active light comes on on the receiver, so I think its maybe connection params.
The only step in setting up the receiver that I couldn't perform was changing the outbound COM port to port 8 in BT Settings as specified in the receiver manual.
I go into Bluetooth Settings.
Select the Services tab.
Select 'Serial Port'' as instructed.
Make sure Enable service is checked, authoriszation required isn't, and Authentication passkey required isn't.
Then I go into the Advanced options to set the ports and I can't edit them...
Any ideas? I need to use this this afternoon - in about and hour and 10 minutes, and have been struggling for 2 hours to get the thing to recognise the receiver...
I've already had to do a hard reset, and lost a load of other stuff off the device, because the Bluetooth setting seemed to get corrupted and i started getting a message about Bluetooth license having expired. That bit is OK now after the hard rest, but the receiver is still not recognised.
In the TomTom prefs I have gone into GPS status and hit the configure button. Selected 'Other Bluetooth GPS'., and hit the ''Bluetooth Serial Port 5" line (which is what the inbound COM port connection is set to).
According to Bluetooth settings my Inbound COM port is 5 and my outbound is 6. The receiver setups says these should be Inbound 5 and outbound 8.
Please please point me in the right direction.
Thanks,
FM
try using cable
In TomTom try using the Other NMEA cable device (or somthing similar) - select the com port and set the baud rate (mine uses 9600 but you may need to try a few settings). I also ensure that I connect the device in Bluetooth manager before starting TomTom.
Hope this helps.
Denver
TomTom 5. & BT GPS
Don't tell me you haven't used the "outbound" com port setting .
The inbound/outbound name is nothign to do with data flow, it's whi instigates the connection.... the XDA does, so it's an Outbound connection you need to use.
Try Com6 (or com 8 .... whatever it was)
Once again, xda-dv forums members are stars!
That sorted it..
9600 and selecting the inbound com port (i think it was that one) made the thing spring to life..
now i know where i am going..
cheers cgrillo,
FM
hi
try to make 38000 bps , and remeber to choose com6 on other cable select...
i try it and he cames like a ferrari....eheheh
cu
Is there a quick way to have TOM TOM connect to the GPS Mouse when TOM TOM is started? Currently I have to start blue tooth manager and connect to GPSlim236 manually.
Then run TOMTOM.
Also, in my blue tooth manager my blue device is listed as:
Holux GPSlim236: SPP Slave.
is SPP Slave correct?
same problem as above! but i lose the conecction after about 10 seconds! any ideas? ive searched the whole forum and this is the closest ive come
Hi, my xda mini s only has bluetoth COM ports on port 6 + 7, however tomtom5 only recognises the IR, serial, and COM ports 0, 2, 3, and 9. I have tried the 'Other cable...' thingy, changed the BAUD rate, and generally messed around with it. Any ideas?
btw, i use a globalstat BT-359 receiver (bluetooth)
Hello, i've installed Tomtom 5.21 and the maps and everything is Ok. but i can't make the link between my gps reciver (Royaltek Star III) and the atom XDA. I've installed the partnership in the settings but it doesn't connect with the antenna. I've seen in my other pda (ipaq hx4700 and ipaq hx2790) that there is a bluetooth manager in the connection setting but there is non in the atom XDA. Do you know what's the solution ?
Thanks
create OUTGOING COM port for GPS device :wink:
The same problem again
I've tried but i can't choose the port i want and if i choose another one, i can't find it in the gps settings in tomtom.
XDA ATOM to TOM-TOM GPS
ALTHOUGH NOT IDENTICAL, HP iPAQ rw 6828 settings as follow:
[SETTINGS]>[SYSTEM]>[GPS]
This gives you acess to [HARDWARE PORT]/[SOFTWAREPORT]/[GPS AUTO CHOICE]
On the Navigator, Look for Configuration >[NMEA]>Communication Port which should match Hardware port as set above.
BlueTooth COM7 OR 6
USB Cable COM8
SERIAL COM9
Also check the protocol while pairing, BLUTOOTH>[SPP]
Ensure your device is [Discoverable]
Ensure [PASSKEY] identical both sides.
Also under NMEA [SENTENCE] will affect how much data is exchanged each time your atenna poles, GPRMC/GPGGA/GPGLL are the most common.
Hope this helps. 8)
p.s. Checkout www.pocketgps.com and www.ozzieexplorer.com
Both have PDA/GPS forums
Grease Monkey
if you have read first post, you can understand, that the problem with TOMTOM navigator, not with OZI explorer. Then
BlueTooth COM7 OR 6
USB Cable COM8
Click to expand...
Click to collapse
tom-tom navigator works only with 8 bluetooth port... not with 6 or 7
No result
Impossible, nothing's working. There's no connection between the antenna and the tomtom.
In Tomtom the avalaible ports are : com 2, com 3, com 4 and com 9
On the atom, bluetooth is in discoverable mode and i've created a partnership with the antenna. I've created an outgoing port on com 8 and for the incoming port in com0 because i can't choose com 2, com, com 4 and com 9.
I really don't know what else i could try
TOM-TOM to BT GPS
KROPOTOV: fAIR ENOUGH - MISSED THE WOOD FOR THE TREES
DRAGSTERBOX: CHECK irDA, SETTINGS /CONNECTIONS/BEAM;disable receive all incoming beams ;which should free serial port.
jus my pennies worth
Grease Monkey
:wink:
only when you tap "receive incoming baems", com port is using... othertime it's free :lol:
Just installed Tomtom 5 on my HTC tytn. The program "works", i have paired the gps and phone, but cant get the com ports right... Tomtom program just tells me to pair the gps/phone, and the only com ports shown in tomtom is port 3 and 7. But, i does not work to assign port 3 og 7 in the bluetoothmanager on the phone? Anyone who can help me?
Go to bluetooth settings then New outgoing Port and then choose one that allows you to define it in my case it worked with Com5. Then when you start tomtom again the port you created appears along with the others choose it and there you go
Hi,
I just bought the Freedom Keying GPS, and am trying to set it up with google maps. I'm not quite sure what to do with the COM ports and the serial port protocol thing. Could anyone please help me out?
Try Franson Gpsgate v2.6
you have to setup an outgoing serial port under the bluetooth options (under COM Ports) enter that serial port and a reasonable baud rate in the External GPS settings. Then set a GPS Program port (I use GPD9).
After youve done all that, simply go into Google Maps, open the right softkey menu and choose "Use GPS" Magically! Your phone knows where it is!