After I open hardware keyboard on my QTEK 9100 - screen does not react to touching. How could I fix this or is this normal to Wizard?
hIII
Touch screen dont work after i open keyboard
After I open hardware keyboard on my QTEK 9100 - screen does not react to touching. How could I fix this or is this normal to Wizard?
Reply With Quote.
Hey Dude U need get Ur fone checked its not normal. first u haVE TO check connection of the strip which connects the two part the cell i.e ur lcd screen and battery box part if connetion is fine that mean strip mite crack within it has to be get changed if not plug it properly.
What this dude above me is trying to say, is that the small ribbon cable that connects the screen to the rest of the phone may be damaged in some way, and you do indeed need to have your device checked out.
drawgas said:
After I open hardware keyboard on my QTEK 9100 - screen does not react to touching. How could I fix this or is this normal to Wizard?
Click to expand...
Click to collapse
Did you try a screen realignment? This usually fix most touch screen problems.
switch housing case now when i tur on phone i get on a bright white screen. any suggestion would be great
might have something to do with the flex cable. maybe it was misaligned when you installed your new housing, or may have gotten loose due to the open/close thing. sometimes, i wish that there was a software that would disable the automatic screen rotation when you slide open the keyboard - that way, i will not have to go through that alignment bit almost everyday.
drawgas said:
After I open hardware keyboard on my QTEK 9100 - screen does not react to touching. How could I fix this or is this normal to Wizard?
Click to expand...
Click to collapse
flash back to a base WM5 rom, like T-Mo 2.26 and see if that solves it. i had the same problem and this did the trick. from there i flashed back to wm6.1
Related
hi to all,
i have this O2 XDA2 when i powered on the phone it begun to hang up then i can't press or use the PDA...even i removed the the battery and put it back always hangs...so i tried hard resseting it but after that always ALIGN SCREEN now apprears on the screen...
hope that anyone here has a solution to this problem...thanks and merry christmas
this problem is same as the problem i posted is the WALLABY section...
o2 xda2 always start with screen align
please pleasE help me
my o2 xda¡¡ always start with align screen
Happened to mine too. The touchpad was busted, you can't get past the align screen as the touchpad isn't accepting any input.
same problem here,are there some one can help?
make sure you press the + sign perfectly in middle
omg try to understant the ques.
the same prob happens to me..... the align screen appears many times to me and it wil reinstall new OS. so then it looks new ans lost all old settings & mess, contacts.
how to stop this bug?
yeap i now have the same problem, dont know what happen to my touch screen.. i can press the upper section windows bar, signal and all kind that is on top
can anyone help please?
Like it was said before, your touchscreen is busted ... in my case, i've change my lcd and touchscreen with one bought on ebay. But before to change your lcd, you can try to align your screen with your finger, not with your stylus.
Just put an empty welcome.not file in your SD card.
It should bypass the alignment screen.
If it doesn't, then do one alignment run,hit the power button, and turn it back on. It should work then.
Beware, though, that the screen will be unaligned. Manage to get to the alignment again, and repeat the process (hitting power button thing). Then it'll be aligned correctly (at least in my case it does...)
As Huefu posted the touchpad is dead my friend. There is another topic about the touchscreen being dead that I have posted on. You can buy one on ebay but beware there are two different screen types. So dismantle first to check the connectors on the back of your screen to make sure you get the right replacement.
Your looking around £30 and some patience. It's tricky to take the phone apart and reassemble. You can google for the XDA/MDA service manual, this will show you how to take it apart
Good luck
2 Years Ago i´ve got the Same Problem....I opened my Himalaya
and there was a bigger Piece of Tobacco (I´m Rolling my Cicarettes by myself)between the Screen and the Housing- you couldn´t see it from Outside.
...for my case this was the solution !
and this Year my Himalaya is getting 5 Years old
I would try this first before Buying a new Screen
...but ...as honosuseri mentionened before
There different Models with different Connectors
(i think 2 or 3 different Connectors)
watch out ! DOOD!
hi guys,
quick question.
ive just replaced my dopod838pro housing and upon completion, WM6 wont auto-rotate. where have i gone wrong?? is it something to do with the little square of yellow plastic???
please help
thanks,
Drooch
also
the screen backlight sensor wont work either.
ive done a hard-reset, changed the yellow plastic to the original plastic from the OEM housing. all the connections are firmly connected and i am still suffering from
- no auto-rotate when sliding device
- keyboard backlight wont activate
please help as i dont want to send it 1500Km to get it fixed (outside of warrenty as well!)
Drooch
Did u solve your problem? I have the same problem with you
Solution
I recently ran into the same problem swapping to a new housing. As it turns out the housing I bought did not come with the magnet needed for the phone to recognize that the keyboard had been slid out. Just take the magnet from the old housing and attach it to the new housing. See the below link for pictures.
http://forum.xda-developers.com/showthread.php?t=332035&highlight=magnet
drooch said:
hi guys,
quick question.
ive just replaced my dopod838pro housing and upon completion, WM6 wont auto-rotate. where have i gone wrong?? is it something to do with the little square of yellow plastic???
please help
thanks,
Drooch
Click to expand...
Click to collapse
Hi All
I have just replaced a faulty microphone in my XDA o2 and when I put it all back together Iand reset the device it is now showing a reversed mirror display What have I done wrong and can it be easily fixed ?
Thanks in advance
waam
if hardreset dont help it sounds like you put the screen upside down
Hmm....
Rudegar said:
if hardreset dont help it sounds like you put the screen upside down
Click to expand...
Click to collapse
I didnt actually remove the screen .. I unfolded the mainboard and inserted the replacement mic and closed it all up and now it is a reversed image it appears as if the I am inside the O2 looking out I had not removed the LCD at all from the board so it is in the correct way just not showing the correct image i will try and post a picture if you want
Cheers
Waam
Mirrored Display
hello XDA community,
I have here an imate Jasjar which after a screen upgrade is displaying the image reversed. It did not begin like this,
Upon first booting up the device after screen upgrade, all was fine, screen displayed normally. About a week after this, the screen began flickering, not on/off, but instead, reversing the image shown on the screen. (a mirror) effect. I did not know what to make of this. I delt with it best I could.
A day or two after this flickering began, the screen began to remain in this reversed image mode, which I did not enjoy. The same day, I had dropped the JJ into a tub ( a pretty hard fall), but somehow, by the grace of god, the water failed to enter the inside of the Jasjar.
After the fall, I had noticed that the screen had stopped its flickring antics and remained normal for about a week and a half. It is now displaying a reversed image only.
I now am unsure of what to do, I searched throughout the XDA forums and discovered that performing a hard reset should repair this.
I suppose my main question is, is there a registry tweak I can perform to revert the displayed image back to its original state
Many thanks to all who respond.
John
EdmundsProductions
DeserteDNJ.com
as far as I know, both of your devices are probably dead. Back in the time I was repairing old Ipaq's the mirrow effect was epically called "The mirrow of death" and meant that the display controller (a chip) has failed.
I'm not 100% sure, but I don't think you have many chances to bring them back. Maybe this is not your case, but anyway chances are slim.
thats actually a very interesting idea. If you can mirror them via software, you can fool the device into working again
solution ?
Any solution to this yet ?
Is anyone working on that brilliant idea of that mirroring software ?
I've been having the same problem for almost 6 months now. But for some reasons I am surviving with my O2 XDA EXEC. Now, I can hand my brick to friends without being concerned about my personal messages being read.
However, I have found something. When I charge my phone with a motorola charger, while on charger, the screen flips back to normal. So, my best bet- it is actually a tweeny weenie IC not doing what it is supposed to do.
mirror solution!
Tape the phone to your car's dash and use it as a H.U.D.!!!
hey.... maybe I am on to something here mmmm.....
Frogger said:
Tape the phone to your car's dash and use it as a H.U.D.!!!
hey.... maybe I am on to something here mmmm.....
Click to expand...
Click to collapse
Does anyone know how to make the PDA do this, I've searched everywhere for a software solution but to no avail.
I want to add a second screen to my PDA (piggybacking on the existing screen) but with an inverted display. This way I will have a normal touchscreen display for entering data and an inverted display for HUD use.
I'm aware that when this happens as a fault it is normally due to a loose display connection causing one of the outer contact to come loose, but I'd need to know which 'wire to cut' to force this fault.
Any help would be greatly appreciated.
i have an spv m3100..and after firmware update the touch screen does not work(not does not align...does not work....)
please someone help me
If you have a friend with the same phone, download remote screen alignment. It copies the alignment information off the Hermes to a PC. You can then use the app on the pc to align the hermes on the 1st startup though if the digitizer is stuffed then it won't fix it as it will go out of alignment almost immediately.
You can use the phone and most functions using the hard ware buttons though it can be a pain.
Theres also a file you can download (apparently) that is on the sd card and allows you to bypass the alignment screen but I can't tell you much more about it.
Cheers...
thx for the answer...but my problem its not to align the screen.....its to get the screen work........................the screen doesnt response
sorry for my english.....
Exactly, if you Hard reset or flash a new rom thinking to fix it you will be stuck at the alignment screen.
My digitizer went on my Jasjam, I could still use the hardware keys to navigate but the touchscreen was useless. I did a HR on advice I got off here. BIG MISTAKE.... Luckily for me I have a friend with the Jasjam too, I downloaded remote screen alignment and could use it (minus the touchscreen) until I could fix the LCD.
I beliee your digitizer has gone bung and needs to be replaced, easier to purchase a LCD/digitizer combo as its easier to replace.
Cheers...
delete the welcome.ink that is in the windows\startup folder and it wont ask for the alignment to be made. but as ultramag69 has stated if the touch screen digitiser is broken, then it wont be of any help. Out of curiosity, did the touchscreen work fine before you flashed the rom or is that the rreason you flashed a new rom, to try and fix it?
i can use my phone......but the touchscreen does not work...i reflash the old firmware...and again does not work.......how can i do hard reset?...and what is the cost of lcd/digitizer?
My Raphael doesn't go forward from the align screen since I hard reset on Mystic 6.5 lite ROM. Now I have tried all stock ROMS with the same problem. I Will try to best describe the problem in a chronological order.
1. Had stock ROM latest with TF3D2
2. Flashed to Mystic ROM 6.5 lite, took three cycling of align screen to get through
3. After 24 Hrs lock screen got stuck, no sliding action worked,
4. Performed soft reset, phone boots up to lock screen again.
5. After several tries decided to hard reset
6. Normal boot up until Align Screen, The align screen markers keep rotating on tap, but doesnt pass through to home screen or customization.
The phone connects to active sync, and I can synchronize, flash roms normally.
I like to think that 6.5 ROM changes some screen sensitivity settings, and this is not allowing the screen to align normally. Somehow these settings could be stuck,
I request one of you experts to guide me in getting my expensive phone back. FYI, I have no warranty, I am not even in UK, I have purchased this phone over Ebay, I have flashed around 15 ROMs since my 2 month ownership of the phone, with no problems.
create an empty file called welcome.not and place it on your sd card then hard reset
welcome.not
Warjcowski said:
create an empty file called welcome.not and place it on your sd card then hard reset
Click to expand...
Click to collapse
Done that and it successfully skips the alignment section...but.....
It now recognises touches but The touch screen takes wrong inputs, some times it doesnt, how can I recalibrate, without going into align screen, or can I go there too??
Where do I go from here
sandandrocks said:
Done that and it successfully skips the alignment section...but.....
It now recognises touches but The touch screen takes wrong inputs, some times it doesnt, how can I recalibrate, without going into align screen, or can I go there too??
Where do I go from here
Click to expand...
Click to collapse
here are a few links and misc info. Unfortunately development was stopped since calibration wasnt perfect, but its worth a shot.
http://www.wmexperts.com/align-your-touchscreen-automatically
http://forum.xda-developers.com/showthread.php?t=473976
Cab location (post 45): http://forum.xda-developers.com/attachment.php?attachmentid=149596&d=1232741513
(post #48) Try editing this reg:
HCM\HARDWARE\DEVICEMAP\TOUCH\CalibrationData
values: 485,500 785,171 785,820 193,820 188,175
Hi, if the align screen markers are not accepting your input, it is more than likely something is interfering like a screen protector or case putting pressure on the screen. (or a digitizer failure)
the only reason it would not accept the inputs is if the data it's receiving is too far from the actual point of the crosses.. it makes you keep cycling through until it's within a level of tolerance..
Warjcowski said:
here are a few links and misc info. Unfortunately development was stopped since calibration wasnt perfect, but its worth a shot.
http://www.wmexperts.com/align-your-touchscreen-automatically
http://forum.xda-developers.com/showthread.php?t=473976
Cab location (post 45): http://forum.xda-developers.com/attachment.php?attachmentid=149596&d=1232741513
(post #48) Try editing this reg:
HCM\HARDWARE\DEVICEMAP\TOUCH\CalibrationData
values: 485,500 785,171 785,820 193,820 188,175
Click to expand...
Click to collapse
Thanks for that ready info, really appreciate it.
Though it does give me some promise, but as you know I cant use the touch screen accurately, so installing a cab or changing the registry is near impossible scenario, unless those can be done via a computer. Right now, wherever I click on the screen, the notification area comes up with battery, network strenght info etc.
Do you know of any way how we can clean up the entire TouchPro (waever it means) and make a new flash. I presume flash does that, but then again I think there is some leftovers from previous ROM, as mentioned in the "Flashing your first GSM ROM" sticky, where it is recommended to hard reset immediately after flashing.
All your help required to save the phone and my money going down the drain. It just hurts that I was so much in love with this phone, since using Wizard for 3 years. Cant bear to lose this fight.
Da_G said:
Hi, if the align screen markers are not accepting your input, it is more than likely something is interfering like a screen protector or case putting pressure on the screen. (or a digitizer failure)
the only reason it would not accept the inputs is if the data it's receiving is too far from the actual point of the crosses.. it makes you keep cycling through until it's within a level of tolerance..
Click to expand...
Click to collapse
Thanks DA_G for considering to help me overcome this.
At the moment I have no screen protector on, I had one on for two weeks, and as it wasnt a good fit and collecting dust underneath, I threw it out arnd 2 days back. I have always used the normal sleeve case from HTC.
If you say there is no other reason for this behavior other than hardware issue, then I have no options left. You mention that the digitizer may be broke, couldnt it be that the software part of the digitizer is broke and we can rectify that.
After using wizard for three years, and that too very roughly, I have like dropped it several hundred of times, and not facing a problem, I refuse to believe HTC quality has dropped down so low. This touch pro was used most carefully for arnd 2 months only.
I still ask you to give me more options before going for hardware replacement. As of now I will remove welcome.not, hard reset and try aligning as long as I can bear it.
hi you should be able to use the keypad to cycle through... is it? i use to have tytn II. so u can install the fix or do a reg edit with it.
gaiden said:
hi you should be able to use the keypad to cycle through... is it? i use to have tytn II. so u can install the fix or do a reg edit with it.
Click to expand...
Click to collapse
I have tried it with the keypad, unfortunately, it doesnt work as well as one would want it to ,,,,unlike the wizard I had.
The biggest problem you face here is to click the left and right soft key commands like OK, UP.
Wizard had the hardware keys for that as a fall back but not here.
I am at my wits end,.....wasnt that long!
Look up Pocket Controller @ Handango (it's expensive, but the demo's great). It allows you to run your ppc remotely. It has a pretty trick regeditor. It's a high octane version of active sync. You can probably align the screen with it (Settings>System>Screen). It shows you a big pic of your touch pro screen on your pc, and you can click things with your mouse.
Farmer Ted said:
Look up Pocket Controller @ Handango (it's expensive, but the demo's great). It allows you to run your ppc remotely. It has a pretty trick regeditor. It's a high octane version of active sync. You can probably align the screen with it (Settings>System>Screen). It shows you a big pic of your touch pro screen on your pc, and you can click things with your mouse.
Click to expand...
Click to collapse
Well I didnt try that but I used the My Mobiler, well the catch is you cant align your screen using these softwares, you can do all rest, install cabs everything, except align screen.
I believe the hardware digitizer has given up on me, I have just dropped it at the service center, who will ship it to another one, then they will quote for the repairs. So i keep my fingers cross until next week and see how they try to rip me off.
Did you revert to stock rom, radio and spl before you took it in? I hope so.
Farmer Ted said:
Did you revert to stock rom, radio and spl before you took it in? I hope so.
Click to expand...
Click to collapse
I reverted to only stock rom and radio, not the SPL.
As it is I havent given it in warranty, so I assumed it wont effect either ways.
It's weird you started having the problem after you removed the screen protector. Why did you remove it? Did it come off easily, or did it stick a little and give you problems? Do you think you might have messed up the screen when you were taking it off?
Farmer Ted said:
It's weird you started having the problem after you removed the screen protector. Why did you remove it? Did it come off easily, or did it stick a little and give you problems? Do you think you might have messed up the screen when you were taking it off?
Click to expand...
Click to collapse
I dont think that my removal of screen protector could have hurt the screen. As it is the screen protector was stuck on loosely.
The protector I had was a little hard kind and thick kind as opposed to the usual thin layer. I really didnt like it.
I am still of the opinion that WM6.5 rom had changed the sensitivity or some other parameter of the screen to an extent where the hardware couldn't cope. As I first faced the problem with align screen repeating 3 times when I installed that.
Within 24 hrs my digitizer had given up on me. Hence I think, if I the ROM can be completely sanitized and then flashed, the digitizer should work.
I am in no way an expert on these things, but I am just trying to apply some logic.
T Mobile MDA IV Screen Calibration Data
Can some owner of TMobile MDA IV mobile give me the screen calibration data from the registry.
It can be found at
HKLM > HARDWARE > TOUCH > CALIBRATION
I will be most thankful
HTC Fuze Alignment issue
Okay I have an HTC Fuze right, and I did a hard reset on it because the touchscreen was freezing, and working in only certain parts of the screen, so now Everything seems good with the touchscreen except the align screen part.. itwon't let me go past this stage, and Ive been at it for 2 days so can someone please help me out with my issue, I would sincerely appreciate it and thanks.
Dude, there is nothing much that you can do. There are ofcourse ways to skip the calibration screen and get to the desktop, but the functionality of the screen is allready gone.
If you are lucky enough to have a warranty for the thing, its time to use it now !!! If not, then start budgeting for a new phone.
As I didnt have a budget, I am using the phone in this condition since around a year and now thinking to replace it with Nokia N900.