hi guys,
quick question.
ive just replaced my dopod838pro housing and upon completion, WM6 wont auto-rotate. where have i gone wrong?? is it something to do with the little square of yellow plastic???
please help
thanks,
Drooch
also
the screen backlight sensor wont work either.
ive done a hard-reset, changed the yellow plastic to the original plastic from the OEM housing. all the connections are firmly connected and i am still suffering from
- no auto-rotate when sliding device
- keyboard backlight wont activate
please help as i dont want to send it 1500Km to get it fixed (outside of warrenty as well!)
Drooch
Did u solve your problem? I have the same problem with you
Solution
I recently ran into the same problem swapping to a new housing. As it turns out the housing I bought did not come with the magnet needed for the phone to recognize that the keyboard had been slid out. Just take the magnet from the old housing and attach it to the new housing. See the below link for pictures.
http://forum.xda-developers.com/showthread.php?t=332035&highlight=magnet
drooch said:
hi guys,
quick question.
ive just replaced my dopod838pro housing and upon completion, WM6 wont auto-rotate. where have i gone wrong?? is it something to do with the little square of yellow plastic???
please help
thanks,
Drooch
Click to expand...
Click to collapse
Related
hi to all,
i have this O2 XDA2 when i powered on the phone it begun to hang up then i can't press or use the PDA...even i removed the the battery and put it back always hangs...so i tried hard resseting it but after that always ALIGN SCREEN now apprears on the screen...
hope that anyone here has a solution to this problem...thanks and merry christmas
this problem is same as the problem i posted is the WALLABY section...
o2 xda2 always start with screen align
please pleasE help me
my o2 xda¡¡ always start with align screen
Happened to mine too. The touchpad was busted, you can't get past the align screen as the touchpad isn't accepting any input.
same problem here,are there some one can help?
make sure you press the + sign perfectly in middle
omg try to understant the ques.
the same prob happens to me..... the align screen appears many times to me and it wil reinstall new OS. so then it looks new ans lost all old settings & mess, contacts.
how to stop this bug?
yeap i now have the same problem, dont know what happen to my touch screen.. i can press the upper section windows bar, signal and all kind that is on top
can anyone help please?
Like it was said before, your touchscreen is busted ... in my case, i've change my lcd and touchscreen with one bought on ebay. But before to change your lcd, you can try to align your screen with your finger, not with your stylus.
Just put an empty welcome.not file in your SD card.
It should bypass the alignment screen.
If it doesn't, then do one alignment run,hit the power button, and turn it back on. It should work then.
Beware, though, that the screen will be unaligned. Manage to get to the alignment again, and repeat the process (hitting power button thing). Then it'll be aligned correctly (at least in my case it does...)
As Huefu posted the touchpad is dead my friend. There is another topic about the touchscreen being dead that I have posted on. You can buy one on ebay but beware there are two different screen types. So dismantle first to check the connectors on the back of your screen to make sure you get the right replacement.
Your looking around £30 and some patience. It's tricky to take the phone apart and reassemble. You can google for the XDA/MDA service manual, this will show you how to take it apart
Good luck
2 Years Ago i´ve got the Same Problem....I opened my Himalaya
and there was a bigger Piece of Tobacco (I´m Rolling my Cicarettes by myself)between the Screen and the Housing- you couldn´t see it from Outside.
...for my case this was the solution !
and this Year my Himalaya is getting 5 Years old
I would try this first before Buying a new Screen
...but ...as honosuseri mentionened before
There different Models with different Connectors
(i think 2 or 3 different Connectors)
watch out ! DOOD!
After I open hardware keyboard on my QTEK 9100 - screen does not react to touching. How could I fix this or is this normal to Wizard?
hIII
Touch screen dont work after i open keyboard
After I open hardware keyboard on my QTEK 9100 - screen does not react to touching. How could I fix this or is this normal to Wizard?
Reply With Quote.
Hey Dude U need get Ur fone checked its not normal. first u haVE TO check connection of the strip which connects the two part the cell i.e ur lcd screen and battery box part if connetion is fine that mean strip mite crack within it has to be get changed if not plug it properly.
What this dude above me is trying to say, is that the small ribbon cable that connects the screen to the rest of the phone may be damaged in some way, and you do indeed need to have your device checked out.
drawgas said:
After I open hardware keyboard on my QTEK 9100 - screen does not react to touching. How could I fix this or is this normal to Wizard?
Click to expand...
Click to collapse
Did you try a screen realignment? This usually fix most touch screen problems.
switch housing case now when i tur on phone i get on a bright white screen. any suggestion would be great
might have something to do with the flex cable. maybe it was misaligned when you installed your new housing, or may have gotten loose due to the open/close thing. sometimes, i wish that there was a software that would disable the automatic screen rotation when you slide open the keyboard - that way, i will not have to go through that alignment bit almost everyday.
drawgas said:
After I open hardware keyboard on my QTEK 9100 - screen does not react to touching. How could I fix this or is this normal to Wizard?
Click to expand...
Click to collapse
flash back to a base WM5 rom, like T-Mo 2.26 and see if that solves it. i had the same problem and this did the trick. from there i flashed back to wm6.1
i have an spv m3100..and after firmware update the touch screen does not work(not does not align...does not work....)
please someone help me
If you have a friend with the same phone, download remote screen alignment. It copies the alignment information off the Hermes to a PC. You can then use the app on the pc to align the hermes on the 1st startup though if the digitizer is stuffed then it won't fix it as it will go out of alignment almost immediately.
You can use the phone and most functions using the hard ware buttons though it can be a pain.
Theres also a file you can download (apparently) that is on the sd card and allows you to bypass the alignment screen but I can't tell you much more about it.
Cheers...
thx for the answer...but my problem its not to align the screen.....its to get the screen work........................the screen doesnt response
sorry for my english.....
Exactly, if you Hard reset or flash a new rom thinking to fix it you will be stuck at the alignment screen.
My digitizer went on my Jasjam, I could still use the hardware keys to navigate but the touchscreen was useless. I did a HR on advice I got off here. BIG MISTAKE.... Luckily for me I have a friend with the Jasjam too, I downloaded remote screen alignment and could use it (minus the touchscreen) until I could fix the LCD.
I beliee your digitizer has gone bung and needs to be replaced, easier to purchase a LCD/digitizer combo as its easier to replace.
Cheers...
delete the welcome.ink that is in the windows\startup folder and it wont ask for the alignment to be made. but as ultramag69 has stated if the touch screen digitiser is broken, then it wont be of any help. Out of curiosity, did the touchscreen work fine before you flashed the rom or is that the rreason you flashed a new rom, to try and fix it?
i can use my phone......but the touchscreen does not work...i reflash the old firmware...and again does not work.......how can i do hard reset?...and what is the cost of lcd/digitizer?
Hi,
I've tried a number of firmwares Europe/Asian/T-Mobile and my local Telstra Rom. But no success.
I replaced my smashed digitizer and LCD the other day, however everything works great, the touch response is inverted - Left to Right. All touches on the left side are responding as if I'm touching the right side of the screen. Everything in the middle is fine obviously but from there it's mirrored.
It's quite possible that because the digitizer was bought from the USA and its in a Telstra (T8697) phone, it's somehow incompatible.
By bootloader is stating the TOUCH is C1(v66)
Does anyone think they may have a solution to this? a Registry edit or some kind of Screen calibration?
Cheers for any help.
BTW - The digitizer capacitive buttons are also mirrored i.e. Back is Search and Search is Back.
This digitizer also has a circle around the Windows (Start) button. My old screen didn't have this..
same problem
Hi gauge41,
I have the same problem :crying:. Do you have a solution ?
I bought my touchscreen on uk by ebay.
Reference:
cgi.ebay.fr/NEW-DIGITIZER-TOUCH-SCREEN-LENS-FOR-HTC-7-MOZART-T8698?item=270791784120&cmd=ViewItem&_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D5%26po%3DLVI%26ps%3D63%26clkid%3D5080495740069852992
All updates have been done through Zune software without changes.
Best regards.
gauge41 said:
Hi,
I've tried a number of firmwares Europe/Asian/T-Mobile and my local Telstra Rom. But no success.
I replaced my smashed digitizer and LCD the other day, however everything works great, the touch response is inverted - Left to Right. All touches on the left side are responding as if I'm touching the right side of the screen. Everything in the middle is fine obviously but from there it's mirrored.
It's quite possible that because the digitizer was bought from the USA and its in a Telstra (T8697) phone, it's somehow incompatible.
By bootloader is stating the TOUCH is C1(v66)
Does anyone think they may have a solution to this? a Registry edit or some kind of Screen calibration?
Cheers for any help.
BTW - The digitizer capacitive buttons are also mirrored i.e. Back is Search and Search is Back.
This digitizer also has a circle around the Windows (Start) button. My old screen didn't have this..
Click to expand...
Click to collapse
I've read somewhere, that there are two modifications of a touchscreen for mozart and they are not compatible, so if your previous digitizer didn't have a circle around windows button, but new one does, mirrored input is definitely because of that. Haven't heard of any registry tweaks to fix that, and I don't think you can fix it by installing different rom. You should probably get a compatible digitizer replacement or try installing different touch screen drivers.
Hi Guys,
After replacing the lcd and digitizer on my S3, the display is appearing upside down?
The touch screen works as if it is the right way round, but the lcd is displaying as if it is upside down.
I've also tried another lcd/digitizer and got the same results!
Is there any way to solve this? Even if it involves using ADB or the likes?
Any help is much appreciated!
Thanks
software has nothing to do with this ( i believe ) ,you connected the display wrong .
Are you sure you bought the original display ?