S3 Screen Upside down after replacement - Help! - Galaxy S III Q&A, Help & Troubleshooting

Hi Guys,
After replacing the lcd and digitizer on my S3, the display is appearing upside down?
The touch screen works as if it is the right way round, but the lcd is displaying as if it is upside down.
I've also tried another lcd/digitizer and got the same results!
Is there any way to solve this? Even if it involves using ADB or the likes?
Any help is much appreciated!
Thanks

software has nothing to do with this ( i believe ) ,you connected the display wrong .
Are you sure you bought the original display ?

Related

[Q] HTC HD2 - Black screen after replacing touch

Hi there,
I have just replaced my broken touch screen and now every time I connect the phone to the PC via USB cable, the screen's backlight goes on but the there is no picture. it vibrates but the LCD does not show anything and it remains blank/black.
The LCD was fine before soldering the new touch.
Any solutions?
Plz help!
Many Thanks
have this same issue as well, bump for a answer..
Hy
I had got the same problem, but i'm find a way: Turn the back cable 2 side.
Sorry for the bad english i'm very tired, but if you didnt understand that tomorrow i will give you a full description.
Same issue
Sorry but I don't understand what you mean "Turn the back cable 2 side", it will help me.
Thanks.
same problem heeeeeeeelp
Any solution to this problem?

[Q] Problems after replacing screen, need help

Hey guys, so I had dropped my phone and shattered the screen on the top left and there was a crack down the middle. Anyways, I ordered a replacement and replaced it..and low and behold, either I did a bad job or somethings up with the ribbon from the replacement screen. When I turn it on, the screen will display this weird static and I can see the mikmik splash screen (Newts RLS6.0), then it'll go black. I guess once the phone goes into sleep mode I can turn the screen back on with no problems. But, here's my main problem..I can't get into amon ra without the screen completely being messed up. I'm a flashaholic and this is terrible for me. Does anyone know how to fix the problem itself, or is there a way I can flash ROMs through PC? (S-Off). Thank you guys in advance

Help Amaze LCD and digitizer not working

Hey guys so out of no where my lcd screen and digitizer do not work, I know the phone is one since the mod lights turn on and off when i press power button. i tried taking out the battery letting phone sit for a couple of hours and still boots up blank screen.
Think its broken? or anyone have a method to try? please any input can help
Thank you!
rdmay20 said:
Hey guys so out of no where my lcd screen and digitizer do not work, I know the phone is one since the mod lights turn on and off when i press power button. i tried taking out the battery letting phone sit for a couple of hours and still boots up blank screen.
Think its broken? or anyone have a method to try? please any input can help
Thank you!
Click to expand...
Click to collapse
If there are no blurrs or cracks o lcd i am afraid that your digitizer must be broken . But you cannot replace digitizer alone , i guess, its somehow glued to lcd ! Also i've seen similar threads with people saying that they had some sort of screen calibration problems and on fixing them - it worked fine !

New Digitizer not working

Hi all,
I order a new LCD Screen and dizitizer for my X10 just install them both and the digitizer doesn't seem to be working at all.
has anyone else had this problem before. When putting the phone back together is it the only the 4 connect that need connecting http://www.formymobile.co.uk/Dismantle/x105.jpg the three highlighted and the one at the top.
Thanks for any help
chris

[HELP]White Screen on Boot !

Hello, i got a Galaxy ace, and i replace the screen, lcd and digitizer cuz they were broken, because my girlfriend, have an attack, and drop the phone hard to the floor, i replace both screen, and now, i get into "Download mode" (blind) and i could update the rom (stock) via Kies, but the phone still have the white screen, from boot, always have white screen, after and before screen replacement. NEED HELP Please !
miloosj said:
Hello, i got a Galaxy ace, and i replace the screen, lcd and digitizer cuz they were broken, because my girlfriend, have an attack, and drop the phone hard to the floor, i replace both screen, and now, i get into "Download mode" (blind) and i could update the rom (stock) via Kies, but the phone still have the white screen, from boot, always have white screen, after and before screen replacement. NEED HELP Please !
Click to expand...
Click to collapse
I think your screen digitizer or lcd is not connected correctly to connecter of display so check that or your lcd has problem..there is no problem of software..just check your display is connected right or your display has peoblem..
Press thanks if i helped u..
Sent from my GT-S5830i using Tapatalk 2
most likely hardware not soft
IF YOU BREAK IT SORRY BUT YOU CAN TRY
open up again clean sockets inspect phone for visual damage (near screws edges etc.) to the board
connect screen to board outside of case so you have access to screen socket plug in the charger and gently touch the ribbon/socket when on if no changes try gently bending the board (very gently you do not want to make something loose or even worse snap the thing) see if any effect on display post any findings
|PS its easy to buy faulty screen as they are not transported the way they should be try to replace
Thanks, ill try all advices i hope i can do something with it, cuz she has a few things on it, that she will like to preserve.. and u know.. if she dont get it, will be my fault.. haha Thank so much ! hehe

Categories

Resources