Hey guys so out of no where my lcd screen and digitizer do not work, I know the phone is one since the mod lights turn on and off when i press power button. i tried taking out the battery letting phone sit for a couple of hours and still boots up blank screen.
Think its broken? or anyone have a method to try? please any input can help
Thank you!
rdmay20 said:
Hey guys so out of no where my lcd screen and digitizer do not work, I know the phone is one since the mod lights turn on and off when i press power button. i tried taking out the battery letting phone sit for a couple of hours and still boots up blank screen.
Think its broken? or anyone have a method to try? please any input can help
Thank you!
Click to expand...
Click to collapse
If there are no blurrs or cracks o lcd i am afraid that your digitizer must be broken . But you cannot replace digitizer alone , i guess, its somehow glued to lcd ! Also i've seen similar threads with people saying that they had some sort of screen calibration problems and on fixing them - it worked fine !
Related
could anyone be able to help me? im using HD2 normally with android 2.3.4. however recently my touch screen have has a problem is that when i turn off screen by pressing the end button, after that i turn on that screen and u know i couldnt slide to go the main menu . but if the screen turn off automatically and u turn on it immediately, u will slide and use it. So, yesterday i decided to up to another ROM to solve it, but when i did it the screen is changed that situation and that situation worse and worse until now i cant touch to screen. who could give me some cures for this disease. cheers for that !!!
btw, i did up to wm6.5 and nothing had changed ...................................
uppppppppppppp............... help me
What ROM are you running on Android? AND are you NAND or SD??
Sadly it has nothing to do with the rom loaded on your phone. The end button is right on top of the ribbon cable for the digitizer. Your phone needs a new digitizer. I had the same thing happen to me. You are not alone and its a common problem. I would say Its actually a fault in the HTC design since the end button puts direct pressure on the digitizer ribbon and eventually its becomes damaged. I have a new hd2 now, but I use button savior on android. It allows you to use a the touch screen to press the end button.
thx for ur advice . probably i have to buy another screen once (.
aprogressivone said:
Sadly it has nothing to do with the rom loaded on your phone. The end button is right on top of the ribbon cable for the digitizer. Your phone needs a new digitizer. I had the same thing happen to me. You are not alone and its a common problem. I would say Its actually a fault in the HTC design since the end button puts direct pressure on the digitizer ribbon and eventually its becomes damaged. I have a new hd2 now, but I use button savior on android. It allows you to use a the touch screen to press the end button.
Click to expand...
Click to collapse
Can you please sen us the link for that software..
I would never use that button again knowing that it would harm my device in the future..
Hi there,
I have just replaced my broken touch screen and now every time I connect the phone to the PC via USB cable, the screen's backlight goes on but the there is no picture. it vibrates but the LCD does not show anything and it remains blank/black.
The LCD was fine before soldering the new touch.
Any solutions?
Plz help!
Many Thanks
have this same issue as well, bump for a answer..
Hy
I had got the same problem, but i'm find a way: Turn the back cable 2 side.
Sorry for the bad english i'm very tired, but if you didnt understand that tomorrow i will give you a full description.
Same issue
Sorry but I don't understand what you mean "Turn the back cable 2 side", it will help me.
Thanks.
same problem heeeeeeeelp
Any solution to this problem?
Hello, please help!
I have my phone without power when I watch an online channel, and after that I put it on charge. After a couple of hours, I have openit and I have a "pixel multicolor screen".
The phone can connect with pc but don;t move foward, and I relock it and after that I do a RUU_signed.exe update, where I get "error[131]:costumer id error
Now the screen is black/blank. I can feel the startup vibration but the screen is not turning on.
It;s there something to try before trow it? Thanks in advance for any ideea!
Comments Withdrawn
zcink said:
I hate to say this and I hope I am wrong, but sounds like from the way you describe it that your screen has overheated and actually burned out.
Can you get anything to light up? HTC splash screen? No?
Is it under warranty?
Click to expand...
Click to collapse
nothing on the screen. do you think it's the screen or the mainboard? because I can see the buttons light and backlight and vibration when I power it up, but the screen is black allways. If I change the screen can I make it work?
no warranty, because it's bought from france and I am not living there.
Thank you so much for your help!
Comments Withdrawn
robertaccess said:
nothing on the screen. do you think it's the screen or the mainboard? because I can see the buttons light and backlight and vibration when I power it up, but the screen is black allways. If I change the screen can I make it work?
no warranty, because it's bought from france and I am not living there.
Thank you so much for your help!
Click to expand...
Click to collapse
If you have any experience with taking phones apart, try to reconnect the display connector.
It could be something as simple as that.
However, if that doesn't work, it probably is the screen.
As Zcink said, it may not be worth repairing since it's going to add up to the price of a new phone.
HI everyone My Xperia Mini Pro worked just fine, then one day the screen remained black after unlocking it... it still worked, i could feel the touch and vibrations, i could basicly do everything just that i wasn't able to see it. After some shaking, pressing, sliding the keyboard out, it came back to its normal state, but would go black again if i pressed it hard and hold...Now the screen is always black. I hadn't really dropped it, it wasn't exposed to high temperatures, it just happened......i took it to some service centers and they have changed the flex cable a few times but didn't work..they assumed it was a hardware issue.....My warranty's long out.....WHAT SHOULD I DO???...Is there a chance that a screen change might help it and what would it cost me? please help
Toowoomba said:
HI everyone My Xperia Mini Pro worked just fine, then one day the screen remained black after unlocking it... it still worked, i could feel the touch and vibrations, i could basicly do everything just that i wasn't able to see it. After some shaking, pressing, sliding the keyboard out, it came back to its normal state, but would go black again if i pressed it hard and hold...Now the screen is always black. I hadn't really dropped it, it wasn't exposed to high temperatures, it just happened......i took it to some service centers and they have changed the flex cable a few times but didn't work..they assumed it was a hardware issue.....My warranty's long out.....WHAT SHOULD I DO???...Is there a chance that a screen change might help it and what would it cost me? please help
Click to expand...
Click to collapse
You have to replace the screen of course . Not very expensive i think .
Toowoomba said:
HI everyone My Xperia Mini Pro worked just fine, then one day the screen remained black after unlocking it... it still worked, i could feel the touch and vibrations, i could basicly do everything just that i wasn't able to see it. After some shaking, pressing, sliding the keyboard out, it came back to its normal state, but would go black again if i pressed it hard and hold...Now the screen is always black. I hadn't really dropped it, it wasn't exposed to high temperatures, it just happened......i took it to some service centers and they have changed the flex cable a few times but didn't work..they assumed it was a hardware issue.....My warranty's long out.....WHAT SHOULD I DO???...Is there a chance that a screen change might help it and what would it cost me? please help
Click to expand...
Click to collapse
My friend broke his XMP screen bro, and in the service center they charged it too heavy such that he can buy an another device
try flashing stock ics just to check if it is software problem else you have to bear expenses if you cant miss such a good device
you can buy cheap screen screen for your device on some asian web sites and mabe from ebay. if you need links, just tell me...
mutlu_live said:
you can buy cheap screen screen for your device on some asian web sites and mabe from ebay. if you need links, just tell me...
Click to expand...
Click to collapse
I need links
Hi Guys,
After replacing the lcd and digitizer on my S3, the display is appearing upside down?
The touch screen works as if it is the right way round, but the lcd is displaying as if it is upside down.
I've also tried another lcd/digitizer and got the same results!
Is there any way to solve this? Even if it involves using ADB or the likes?
Any help is much appreciated!
Thanks
software has nothing to do with this ( i believe ) ,you connected the display wrong .
Are you sure you bought the original display ?