I recently re flashed my Gene with the following ROM RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship, after the sucessfull upgrade message. The phone started to vibrate and does not boot or I get the 3 colour screen. Please help
I had exact the same experience after installed some software and rebooted the device. I do not remember what software it was. After all there was a one way (for me) - take the device to the htc service. After 1.5 month i had got my device with the motherboard replaced, so ...
p.s. sorry my English
Thank You
Related
I got a very strange problem with my HTC Mozart.
After a night of charging, in the next morning, I got a mostly break Mozart.
It could be turned on but stuck at the logo screen. After a while (maybe 2 minutes), it will restart but still stuck at logo screen.
Condition of mine is:
- Ship ROM with jailbroken.
- Can access hard reset screen, done the hard reset but no result so far.
Could you give me some advices?
Should I proceed flash ROM or smt
Seems to like you had been messed with your rom or you are a victim of a some slutty virus. I think best thing is to do is Flash the phone and put a new rom on it. But first Remove All the unusual apps
Hope this will helpful
Thank you for your response but it's impossible to access uninstallation as I stuck at logo screen.
I don't know whether other got the same problem because I think it's all reset after Hard Reset, isn't it?
I have a same problem! plz help!
Hello everyone,
i have some problem with my htc hd2.
Just want to say sorry for my english in advance
I tried to star the phone in usb mode and no having problem. Flash it with cotulla HSPL 2.08 and works fine but when i try to flash the rom i having problem just because the process it's blocked on 1 or 2%.
I can tell you that the htc logo it appear strange with some black line. otherwise when i power on the phone in usb mode (it's impossible to start the phone normally) i see the standard 3 colors RGB and some information included new one that say: "upgrade rom code error, please try again".
what i should to try to resolve this problem???
silvioslim said:
Hello everyone,
i have some problem with my htc hd2.
Just want to say sorry for my english in advance
I tried to star the phone in usb mode and no having problem. Flash it with cotulla HSPL 2.08 and works fine but when i try to flash the rom i having problem just because the process it's blocked on 1 or 2%.
I can tell you that the htc logo it appear strange with some black line. otherwise when i power on the phone in usb mode (it's impossible to start the phone normally) i see the standard 3 colors RGB and some information included new one that say: "upgrade rom code error, please try again".
what i should to try to resolve this problem???
Click to expand...
Click to collapse
what is it your trying to flash?
can you get it in to bootloader mode, plug it in to your computer so where it says "serial" in changes to "USB"
once in that you should try putting the HSPL back to a normal SPL, then install HSPL again. if your attempting an Android ROM, try installing a customer WM instead...
hi guys,
somehow i destroyed my rooted g610 with the xboost module....
so i did a hard reset, but after a reboot when it got till the language selection it did not work any more, i couldn choose a language, it was like the touchscreen was disabled.
so next step for me was flashing it with sd card. it took a while til i found a rom that was working, but after it successfully flashed, it said that there was some error with the cust?
i did a restart but nothing happens, it just vibrates one time and the display stays black, just the green charging light is on...
i dont know what to do anymore, thanks for help..
firmware that was installed was: V100R001C00B124
if it would be any helpful for you, i could also post the sdload.log file
got a HTC one ( pno7100 ) , stuck on HTC ONE BEATSAUDIO Splash screen ...
no idea of its history just received phone like this .
i tried to hard reset & it didnt help .
some tips would be apreciated . never flashed this phone type of phone ...
im attaching screenshot of bootloader & screenshot of error when i chose "Check smartSD"
thanks
mp3hot said:
got a HTC one ( pno7100 ) , stuck on HTC ONE BEATSAUDIO Splash screen ...
no idea of its history just received phone like this .
i tried to hard reset & it didnt help .
some tips would be apreciated . never flashed this phone type of phone ...
im attaching screenshot of bootloader & screenshot of error when i chose "Check smartSD"
thanks
Click to expand...
Click to collapse
If it is a hardware issue, I would recommend you take it to a repair shop or back to where you got the phone.If it is a software issue, sometimes you can run a RUU to reset the phone but unfortunately I don't think there is one for your version 5.16.161.2. You might also be able to get the phone back by:
** Installing ADB and fastboot
** Unlocking Bootloader
** Following the link in my signature nkk71's guide to returning to stock
Hello Everyone. I am new to XDA. My question is that I have an Android Device (MTK) (Not Sure MTK XXXX). Although I know that it is X920E, the copy of HTC Butterfly. By mistake I have manually changed its bootanimation and as a result it is not booting, got stuck at HTC Logo (The new animation which I have downloaded). I thought it safer to take it to the shop but after 3-4 days they returned the phone saying that it is irrepairable. I tried on my own but now the device just stuck at Android Logo. (Shopman must have messed with it). So please can you help me to make my android relive. I had connected it with my PC but because of no driver I cannot proceed. So please, someone kind enough to provide a link to the drivers (X920e-MTK -China Phone) and also steps to flash a rom on it.
Thnx in advance. Looking forward for your reply.
Also do let me know is you need some other information.