hi guys,
somehow i destroyed my rooted g610 with the xboost module....
so i did a hard reset, but after a reboot when it got till the language selection it did not work any more, i couldn choose a language, it was like the touchscreen was disabled.
so next step for me was flashing it with sd card. it took a while til i found a rom that was working, but after it successfully flashed, it said that there was some error with the cust?
i did a restart but nothing happens, it just vibrates one time and the display stays black, just the green charging light is on...
i dont know what to do anymore, thanks for help..
firmware that was installed was: V100R001C00B124
if it would be any helpful for you, i could also post the sdload.log file
Related
Hi there,
I have some problems, which I cant solve using your forum.
So Im posting this.
Yesterday my Leo shut down and I couldnt turn on it. Today I've trided Hard Reset, but nothing was made. i can turn my phone on with white screen only. So i decided to reinstal ROM. I'v set up the bootloader and start installing oryginal ROM for HTC. And the installation is going to 1 % and then the phone stops instalation and turns on with white screen only.
If its important, when I'm installing, on the instalation Window, where should be written the current wersion of my soft, there's norlng, just empty place.
maybe I should do something like formating my htc or instal something other than ROM?
What an I doing wrong?
Hi Folks,
The Phone is stuck at Nubia Logo, and just stays there. TWRP was successfully installed and phone was rooted. Before actually loading the update package, i performed a wipe (delvik, system, data) and flashed a Stock Recovery. It prompted for Reboot which i did and the bad luck started.
Now, Vol-Up+Power boots into stock Recovery but unfortunately i do not have a backup nor an official Nubia ROM for the handset & hence can't do anything. Vol-Down+Power boots into Bootloader in which all the options pretty much take me back to Stock Recovery.
I know i made a stupid mistake but it would be really really helpful if anyone could please help put an end to my misery and undo this error. I have already tried discharging completely and then trying to power it back on again but to no avail.
Thanks in advance
Guys, a little help here please!!
My laptop does not recognize the device, it doesn't even appear when connected via USB Cable, although it charges alright.
I tried installing Nubia Recovery Tool but unfortunately it was in Chinese and I could not understand one word of it.
Please HELP!!
Hi Goraya,
I get a lot of answers from Pesa1234, hi is from Italy so his English is not that good.
I use the ComboRom 4.2 and in principle it is good, although I don't have fast charging.
the phone's model is nubia Z5s mini nx404h. the thing is this model is only sold to Philippines and Russia and its pretty outdated its jelly bean 4.3 but the thing is i rooted it. flashed the suitable TWRP for my device. and i accidentally wiped cache/dalvik then it restarted to recovery thrice even if i choose to reboot to system. the information about this device is so scarce that i had to spend 29 hours just trying to find a way to unlock the bootloader. i succeeded but now this. after certain reboots to recovery i shut it down. and tried to restart it, next thing that's happened its stuck with ZTE logo. buttons dont work. the battery cannot be removed, and its past the 2 weeks handset warranty so im doomed. now every time i try to charge it and connect it into a computer logo will show, again. and it computer says usb not recognized, then thats it. buttons not working nothing is working. please help. im trying everything, almost everything. thanks to anyone who will be kind enough to help me.
Please i need help. I have a leagoo kiicaa mix and this week i had a message on the phone for an OA update wich i did.
Through the middle of the installation it broke down and showed me an error.. After that the phone didnt boot anymore. I searched on the internet and someone told me to flash the phone again. I found the stock Rom, Flashtool everything, and complete the installation successfully..
But after i unplugged the phone from PC its dead now wont respond to anything,won't charge, won't go on, nothing just dead, and i don't know what to do, or what went wrong. Please help me, is there a chance to save my phone?
Hello guys.
I would really appreciate if you could shed some light onto my problem.
I recently acquired a Huawei Y9(2019-JKMLX3). The device is full stock, no custom recovery or root.
Also recently, right out of nowhere, the device ran out of battery, and when I tried to turn it on after a charge, I just got an awful bootloop... (Gets to the HUAWEI logo, and restarts over and over again)
Ok, i kind of know how to deal with this situations(already downloaded stock rom), but the real problem is that I can't access recovery by any means. I've tried every key combination, and nothing... Except for one time, when i did get a recovery screen, but i got FRP lock
Haven't been able to get to that screen again.
So, any recommendations? Is it dead, or is it that I'm doing something wrong.
Thanks for the support on this!
where did you get the stock firmware from?? did you resolve your issue from that time??
please share.
Thx