Sorry for the noob question, but i have looked everywhere and could not find an answer.
So yesterday I install nueSPL 2.47, on my Verizon XV6800 and then flashed to Radio 3.42.50 and then flashed to DCD Rom 3.2.6. I had some problems with authentication, so I called Verizon and they couldn't fix the problem at night because the system was down but they were able to fix things the next morning. Not sure what they did because they didn't give me a new A-Key over the phone.
So after that I was able to place calls out. I then downloaded the Verizon cab and was able to connect to the internet. I am also able to send and receive txt messages, but I can not receive phone calls. Now strangely after ending a call, I did receive one phone call but that was it. The rest of the time anyone calls it only rings on their end and then goes to voice mail. Then a few seconds later I will get a notification that I have a voicemail.
So since all this happened I have reflashed the dcd rom and reloaded the carrier cab. and called both *228 -1 and *228 -2. I still can call out, use gps, internet, and txt, but not get any calls. Any one have any ideas? Any help is greatly appreciated.
Thanks in advance.
that very interesting... I recently upgraded my father in law's phone and also experianed the same thing.
Also interesting, when I did the upgrade to my phone a few months ago I had to get an a key.. I also had to get one once after a hard reset. Perhaps they fixed something for this.
Keep calling VZW not all techs know what there talking about, eventuality you will run into one that know exactly how to fix your problem.
Why does it always say "Conditional call forwarding active" when I make any call?
Hi there, basically I bought a new and sealed T-Mobile branded Samsung Galaxy SII phone from eBay and am using my 3 mobile sim in it.... I assume it wasn't originally locked when I bought it, as I went through the root and unlock method (ChainFire app), and the code was 00000000, and never at any point asked me to enter that code into the system, so hey, my 3 sim seems to work in it.... apart from the fact that for every call I make the message "Conditional call forwarding active" always crops up with a beep to go with it, then after a couple of seconds the call is made. It isn't a major problem as such I don't think, but hell it definitely isn't normal and is quite annoying after spending £400 on this otherwise amazing phone.
I have tried to fiddle with the settings but for some reason I cannot disable any of the call forwarding settings, some sort of error message crops up. I have phoned up the 3 network who I am with three times today and they asked me to enter a few # codes to sort the problem out, but I had no luck, and then they had me factory reset the phone using the option in the settings. I did that, and I still have this problem. I also get the message "Connection problem or invalid MMI" when entering most # codes, this seems to have happened after rooting, though I am not 100% sure if that is the case.
My phone is the Samsung Galaxy S II I900, just to confirm that.
I look forward to hearing from you guys
I am on Three and I get the same message although my S2 was purchased from O2 then rooted. I have not seen any other reports about this but the message has not bothered me.
I have the same message. Ave tried several hings without success, however since it really does nothing, I am starting to get use to it. But if someone knows how to solve it please let us know
voice mail
Hi guys i have this to but it only started when i activated my voicemail so i think its down to the voicemail
e.g if your on the phone and someone else calls they are placed forward to your voice mail ???
hope this helps
Hey there guys, thanks for the replies so far, glad to hear others are experiencing this annoying problem. I seem to have had this since rooting it, originally T-Mobile though I am 99% it was never "locked" to the network for some reason as I mentioned as I have never had to enter the 00000000 code, which the free ChainFire sim app gave me (seems like it means it is unlocked already???). The guys on the 3 helpline were giving me loads of codes which weren't of any help, and telling me about what options I could fiddle around with, but I had tried all of these to no avail.
Are people also getting the MMI message I mentioned in my original post, whenever they enter # codes in the dialer? It seems to me that both of these problems started at the same time (this error message and the forwarding issue - I am sure they are linked). It means, for example, I probably won't be able to set up a speed dial because of it, nor will I be able to use the "secret codes" as mentioned in the dedicated thread of the same name on this site.
Why is it a problem for some and not for the majority of people, we must have something in common which we have done with our phones which has caused this?
I really hope someone can sort this annoying problem out.
It's normal. "Call Forwarding Active" is displayed when all calls are forwarded. "Conditional Call Forwarding Active" shows when forward when busy, forward when unanswered, or forward when unreachable is selected. To make the message go away you'd have to disable the three forwarding options in their settings. The pre-populated number is always your carrier voicemail (read from the SIM) or Google Voice.
BarryH_GEG said:
It's normal. "Call Forwarding Active" is displayed when all calls are forwarded. "Conditional Call Forwarding Active" shows when forward when busy, forward when unanswered, or forward when unreachable is selected. To make the message go away you'd have to disable the three forwarding options in their settings. The pre-populated number is always your carrier voicemail (read from the SIM) or Google Voice.
Click to expand...
Click to collapse
Cheers for the reply Barry, yeah I expect it is normal but the thing is I cannot change these settings, my phone won't let me as an error comes up. I know it's not a major problem, just a bit annoying I can't get it to go away. I can't disable those three things, I tried a few times already.
Plus, I constantly get the MMI error message, which I mentioned before, seems a bit of a coincidence how these problems started the same time. I can't enter the majority of "#" codes into the dialer, it always says "USSD Running" or something along those lines and then produces the message like 2 seconds later.
Any ideas? Thanks so far for the advice
I have this problem but unlike all others I cannot make any calls on account of it. When I try to disable call forwarding I get an error msg saying it's not supported by the operator.
There HAS to be a way to fix this. I cannot make any calls or use 3G.
Try this
menu-call-additional setting-select network default...
It work with my sgs2.
On the Galaxy S2 if you go to: settings-call-call settings-call forwarding-voice call forwarding -- You will most likely see that for unanswered or unreachable calls it's not disabled because it forwards it to your voicemail, that's why it says conditional call forwarding is active. If you disable all options you won't get the message but then unanswered calls won't go to voicemail.Hope that helps.
Satish
dynamicbot said:
Hi there, basically I bought a new and sealed T-Mobile branded Samsung Galaxy SII phone from eBay and am using my 3 mobile sim in it.... I assume it wasn't originally locked when I bought it, as I went through the root and unlock method (ChainFire app), and the code was 00000000, and never at any point asked me to enter that code into the system, so hey, my 3 sim seems to work in it.... apart from the fact that for every call I make the message "Conditional call forwarding active" always crops up with a beep to go with it, then after a couple of seconds the call is made. It isn't a major problem as such I don't think, but hell it definitely isn't normal and is quite annoying after spending £400 on this otherwise amazing phone.
I have tried to fiddle with the settings but for some reason I cannot disable any of the call forwarding settings, some sort of error message crops up. I have phoned up the 3 network who I am with three times today and they asked me to enter a few # codes to sort the problem out, but I had no luck, and then they had me factory reset the phone using the option in the settings. I did that, and I still have this problem. I also get the message "Connection problem or invalid MMI" when entering most # codes, this seems to have happened after rooting, though I am not 100% sure if that is the case.
My phone is the Samsung Galaxy S II I900, just to confirm that.
I look forward to hearing from you guys
Click to expand...
Click to collapse
Its just simple, Just take out ur sim card put it will some other mobile and cancle all diverts....and then put it back to ur mobile again and then check out wat happned....
Thanks
---------- Post added at 01:41 PM ---------- Previous post was at 01:36 PM ----------
dynamicbot said:
Hi there, basically I bought a new and sealed T-Mobile branded Samsung Galaxy SII phone from eBay and am using my 3 mobile sim in it.... I assume it wasn't originally locked when I bought it, as I went through the root and unlock method (ChainFire app), and the code was 00000000, and never at any point asked me to enter that code into the system, so hey, my 3 sim seems to work in it.... apart from the fact that for every call I make the message "Conditional call forwarding active" always crops up with a beep to go with it, then after a couple of seconds the call is made. It isn't a major problem as such I don't think, but hell it definitely isn't normal and is quite annoying after spending £400 on this otherwise amazing phone.
I have tried to fiddle with the settings but for some reason I cannot disable any of the call forwarding settings, some sort of error message crops up. I have phoned up the 3 network who I am with three times today and they asked me to enter a few # codes to sort the problem out, but I had no luck, and then they had me factory reset the phone using the option in the settings. I did that, and I still have this problem. I also get the message "Connection problem or invalid MMI" when entering most # codes, this seems to have happened after rooting, though I am not 100% sure if that is the case.
My phone is the Samsung Galaxy S II I900, just to confirm that.
I look forward to hearing from you guys
Click to expand...
Click to collapse
Just simple take out your sim card and put in some other mobile and cancel all divert and then put it back to ur mobile and check out wat happened ....
s_rajkotia said:
Its just simple, Just take out ur sim card put it will some other mobile and cancle all diverts....and then put it back to ur mobile again and then check out wat happned....
Click to expand...
Click to collapse
you realise thats almost a year old? Check the dates on threads before you post
ADMIN EDIT: True, but it is a current issue for some people so it's still valid to answer the question.
Doesn't work
My phone drops every call, even with SIM cards from different countries and in all conditions. Thinking this call forwarding might have something to do with it, I tried to deactivate it, first through the settings -- no luck -- than by reformatting the phone. Nothing, cannot get rid of it because it says it is set by the 2 different phone companies I use.
I don't mind the message but when I call someone, I can hear that the call is being sent somewhere, there is a 1st ring, then it rings the other phone. Does this have to do with call forwarding? Can it be interrupting the phone signal and causing the call to drop ?
I have also removed both the Turkcell and Telefonica SIM cards, put them into another unlocked phone and tried to cancel but as soon as I put them back, the message returns and my calls drop.
Im also getting this error when I updated to 4.1.2 and used galaxy s2 sim unlock
Has nothing to do with call forwarding !!!
The Message worked on all AT&T cell phones, since i can remember,. i been using go phones since 06..... and they all had this message when right after the number was just dialed, right after pushing the green phone icon button to dial it , right after entering the number to be dialed on the keypad.
I have found this message on LG Cell Phone 500 CU series... and all my other phones as well...
IT is NOT a CALL FORWARDING ISSUE>.. because i had worked on that for awhile myself...
IT is a Carrier Issue I believe.
and it doesnt happen ever single time , just on certain days . not sure, why... but perhaps, call your carrier and ask them what type of phone they have your phone listed as.
Then tell them the model and make u have. that might change things... Cell phone carriers know how to mess with your phone and break it too...
so if ur having issues with messaging, call forwarding, it just may be the settings the carrier has you listed or down for.
blah.
anyways. yes it is annoying, i just got a new phone, samsung galaxy express. it is starting to happen too on this one. but had it for a few days and it never showed up till about 2 days later.
I thing it is perfectly normal for your device to display this message, I'm central america and mine also says the same thing anytime i make a call "Conditional Call Forwarding Active. However since I have a prepaid or pay as you go plan with my carrier and whenever I have no more credits to make calls i get the message "Calling Barring Enabled". I guess it has something to do with your carriers settings, it doesn't bother me at all though since I'm already used to it so hope that helps.
Enabling call forwarding for real and then disabling it seems to work
I got the same error also on every version of the stock rom (it used to appear occasionally, though) on my Samsung Galaxy S2 (i9100, without g), in that case going into forwarding settings was enough, because the mobile used to read the current configuration from the network and recognized that there was no forwarding active!
I moved to Cyanogen Mod 10.1.3 / Stable and going into forwarding settings was useless... He was updating with the data from the newtwork, all the forwarding options were disabled but the notification message was still there...
I decided to enable it for real by putting a friend number from the same carrier and then disabling it immediately after, and it solved my problem! Hope it helps!
PS: I'm not sure that enabling the call forwarding is free of charge, just double check with your carrier first!
dynamicbot said:
Hi there, basically I bought a new and sealed T-Mobile branded Samsung Galaxy SII phone from eBay and am using my 3 mobile sim in it.... I assume it wasn't originally locked when I bought it, as I went through the root and unlock method (ChainFire app), and the code was 00000000, and never at any point asked me to enter that code into the system, so hey, my 3 sim seems to work in it.... apart from the fact that for every call I make the message "Conditional call forwarding active" always crops up with a beep to go with it, then after a couple of seconds the call is made. It isn't a major problem as such I don't think, but hell it definitely isn't normal and is quite annoying after spending £400 on this otherwise amazing phone.
I have tried to fiddle with the settings but for some reason I cannot disable any of the call forwarding settings, some sort of error message crops up. I have phoned up the 3 network who I am with three times today and they asked me to enter a few # codes to sort the problem out, but I had no luck, and then they had me factory reset the phone using the option in the settings. I did that, and I still have this problem. I also get the message "Connection problem or invalid MMI" when entering most # codes, this seems to have happened after rooting, though I am not 100% sure if that is the case.
My phone is the Samsung Galaxy S II I900, just to confirm that.
I look forward to hearing from you guys
Click to expand...
Click to collapse
I had the problem. Just solved it. select any one sim. Select settings-call settings-call forwarding-make sure all the options listed therein are disabled. Do this selecting all your sims one by one. The problem will have solved.
anilcsimon said:
I had the problem. Just solved it. select any one sim. Select settings-call settings-call forwarding-make sure all the options listed therein are disabled. Do this selecting all your sims one by one. The problem will have solved.
Click to expand...
Click to collapse
I can't disable the last option (please check the pics)
Sent from my Micromax Canvas 4 A210
Hello,
I also got the similar problem I can't call anyone since 2 days whenever i try to call someone the call drops out and shows the pop up message "Conditional Call Forwarding Active".
I tried to disable call forwarding in call settings but i cant disable the fourth option " Forward Call When Unreachable "
When i try to disable it another pop up message shows up " Unable to deactivate call diverting when phone is Unreachable. Unsupported by operator. "
Please help it is really annoying i can't call anyone.
I use Samsung Galaxy Note 3 Neo
Hi all.
So I have this great SI4G from AT&T that I rooted and unlocked to my network, Rogers. However I've noticed that the 3 conditional call forwarding options are set with (I assume) the previous owner's number. If I try to disable them, or change the number I get an "unsupported" or "unexpected answer" error message.
I can still make and receive calls, but if I miss them, they will not go to my voicemail. Rogers does not support those options so I really don't know how to kill them... Any ideas?
I've seen this around and about the forums, but no solution really...
Thanks!
This is not meant to bump the topic, but I just flashed a new ROM and I still get those settings. This would mean it's stuck in the SIM card... which doesn't make any sense to me.
Anyone?
call rogers tech support, they should be able to help. My best guess.
*sigh* yeah thanks chrisrotolo, I forget to do that too often... and guess what? The forward thingy was a bug actually; they reset my VM and now it works fine. Turns out all the numbers that appeared are the numbers that the network puts in to compensate for these unsupported options.
+1 for me on the duh scale...
Like the title says, everytime I flash a new one, or if I flash ziggy kernel especially I cannot get voice calls or data, i get radio interface shortage errors when texting ect, i have to do the ##3282# reset about 5 times to get anywhere, any theories or suggestions? I haven't seen anyone else with this problem and it started when I flashed xron ROM a few nights back..
Are you a google voice user? Are you gsm or cdma?
I only use google voice for voicemail, its Sprint CDMA
Did you update your radios AND firmware? I think the file was radio firmware nohboot or something like that?
3VO Sent
PaulB007 said:
Like the title says, everytime I flash a new one, or if I flash ziggy kernel especially I cannot get voice calls or data, i get radio interface shortage errors when texting ect, i have to do the ##3282# reset about 5 times to get anywhere, any theories or suggestions? I haven't seen anyone else with this problem and it started when I flashed xron ROM a few nights back..
Click to expand...
Click to collapse
It doesn't happen to me EVERY time, but I find myself having to go through the whole reprovisioning and re-setting data thing a lot more than I would prefer to. Hell, I've had 6 of these handsets since release date and I've had to **** around with this issue right out of the box on EVERY one! Love the phone but cmon HTC....wtf!! They really screwed the pooch on this phone, lol.
---------- Post added at 08:00 PM ---------- Previous post was at 07:47 PM ----------
My problems are usually data problems. As far as losing voice, that happened once after using one of the older "superwipe" files floating around. Took a whole Saturday to get it back, had to get Sprint involved...boy was I pissed! Been using XRON superwipe lately and it's doing the trick!
Try ##scrtn# from dialer then enter your msl. After it reboots let us know if that works.
jonnybueno said:
Try ##scrtn# from dialer then enter your msl. After it reboots let us know if that works.
Click to expand...
Click to collapse
Still didn't help, when I go to more info on the radio interface shortage error the error code is 67,wasn't that the code a lot of people were getting after revolutionary first came out?
Call sprint and have them reset on their end....and good luck
Sent from my PG86100 using xda premium
I might have to do this, for some reason this actually happens after every single reboot, had to clarify that.
This happened to me too, even with those resets you are talking about I wasn't able to fix it. You have to call sprint, they do something on their end, guide you through the same process you are talking about, and then it works. Dial 611, tell them the error and any error code you have. Apparently they are familiar with it because they know exactly what you are facing and know how to fix it without doing any research or any other diagnostic steps.
I don't think this problem has anything to do with HTC, or the phone itself. I think it has to do with Sprints Google Voice integration. I use GV for voicemail only and I have this problem every once in s while. Next time it happens, try making the call using GV. If it works you know this is your problem. For some reason, even though you have it set up differently, GV will take over. This is a completely separate issue from the error 16 that a lot of people are getting with this phone. If it is an error 16 a simple call to Sprint will fix it. If it is the GV integration thing, then it is much harder to fix and rebooting to recovery, wiping cache and dalvik will sometimes fix the problem. Also, reflashing the kernel will sometimes fix it too. I haven't figured out a definite way to fix it yet though. It seems every time this happens, it takes something different to fix it.
I'm actually not even setup to make calls on google voice, I went directly onto the voice. Google. Com website and changed the settings to voicemail only and turned off all other integration.. Can it still be interfering?
PaulB007 said:
I'm actually not even setup to make calls on google voice, I went directly onto the voice. Google. Com website and changed the settings to voicemail only and turned off all other integration.. Can it still be interfering?
Click to expand...
Click to collapse
Yes. Mine is set up the same way and when this happens if I choose to ask me every time I make a call in the GV app settings and choose GV to make the call it goes through, but when I chose do not use GV it won't work. I get a message that says, "I'm sorry, we are unable to complete your call at this time. Please try again later" and that's it. Since the Google Voice integration with Sprint I have noticed that no matter who you are calling you must dial 1, then the area code, then the # even if it is a local call.
As the title says, as soon as I start a call it ends and when someone tries to call me, they get the voicemail saying that I'm not reachable and I get an SMS saying that someone has tried to call me while I wasn't reachable, but I don't get any call popup on my screen.
Tried flashing every modem firmware, wiping cache, switching from google phone to stock, turning off volte but none of those worked.
Please help me, I've been struggling with this problem for three days and it is impossible to work like this.
NoSenze said:
As the title says, as soon as I start a call it ends and when someone tries to call me, they get the voicemail saying that I'm not reachable and I get an SMS saying that someone has tried to call me while I wasn't reachable, but I don't get any call popup on my screen.
Tried flashing every modem firmware, wiping cache, switching from google phone to stock, turning off volte but none of those worked.
Please help me, I've been struggling with this problem for three days and it is impossible to work like this.
Click to expand...
Click to collapse
Check your APN settings and if necessary correct them to what your carrier says they should be. I had a similar problem and that was the fix.
If that's not it, try your SIM in a different phone if you can. You might have a bad SIM.
Heyyo, here's an APN list that might work better for you since it is updated by Google.
https://sourceforge.net/projects/lineageos-for-x2/files/Mods and Tweaks/APNs Update from Google/