RESOLVED:
if you are unable to use phone codes (like I was) then you are probably an idiot, just like I am. Go back to DCD's original post and make sure to install a Carrier ROM (linked to very clearly in his first post).
Many thanks to Santehnik for providing a workaround and to GC14 for providing the actual solution.
###################################################################
I just flashed to the new 3.1.6 and am unable to access the phone codes (e.g. ##775#).
I tried entering it into the dialer (as well as ##DIAG#, ##DEBUG#, etc...) numerous times. Resetting my device and trying again. No love.
I also tried running \windows\EPST.lnk and \windows\EPST.exe. What appears to happen is that the program appears to load for 1/2 second and then disappear (presumably it is crashing, though I dont know for sure).
I re-downloaded the ROM on a different machine and reflashed my Titan, but it made no difference.
I also tried installing the Phone Codes .cab which adds phone codes to your Programs Menu, but those links do the exact same thing as the EPST.lnk (something flashes for 1/2 second and then is gone).
I have the Sprint Carrier Cab (3.39.10) installed and i'm on PRI Version 2.03_003 and I can make phone calls.
Has anyone else had this problem? Any suggestions?
Here are what the codes link to:
##778 = ..\Windows\EPST.exe ##778
#33284 = ..\Windows\FieldTrial.exe
#3424 = ..\Windows\DMRouter.exe /DIAG
#38278 = ..\Windows\Fuart.exe Fuart
~~~~~~~~~
Note to self, add that info to the Wiki plus a link to an archive of WM links to execute those functions.
bob, what dialer do you have installed?
First of all use ##778CALL (instead #)
And put files from zip into windows folder.
For me this works
p.s can you send Phone Codes.cab to santehnik.ua""gmail.com
I can't find it
For all of those I need 2 # key presses for them to work. I'm using DCD 3.16 w/ radio 3.39 if it makes a difference.
Also what the heck is fast uart mode? (##38278)
Here are what the codes link to:
* ##778 = ..\Windows\EPST.exe ##778
* #33284 = ..\Windows\FieldTrial.exe
* #3424 = ..\Windows\DMRouter.exe /DIAG
* #38278 = ..\Windows\Fuart.exe Fuart
Click to expand...
Click to collapse
Key two things:
1. FieldTrial, DMRouter, and Fuart are ##33284, ##3424, and ##38278 respectfully.
2. You should point out that for Sprint, there's an extra # at the end instead of pressing Send. (ex. ##778#)
gc14 said:
bob, what dialer do you have installed?
Click to expand...
Click to collapse
I have the default dialer installed. I am using the "stock" DCD 3.1.6 ROM. I havent installed ANYTHING since i reflashed. I dont even have my SD card popped in. It's as clean as you could ask for.
I tried using ##775[CALL] and it does exactly what clicking on EPST.lnk does - it flashes for 1/2 second and then disappears.
I have the Sprint Carrier Cab (3.39.10) installed and i'm on PRI Version 2.03_003 and I can make phone calls.
Click to expand...
Click to collapse
Ok are you sure you installed the sprint carrier cab? 3.39.10 is the radio NOT the carrier cab.
Also on Sprint you have to add a # to the end of the codes. ##775# with NO send. ##775 send is for other carriers.
I hate to break it to you, but those files that "resolved" your problem are IN the sprint carrier cab.
gc14 said:
Ok are you sure you installed the sprint carrier cab? 3.39.10 is the radio NOT the carrier cab.
Also on Sprint you have to add a # to the end of the codes. ##775# with NO send. ##775 send is for other carriers.
I hate to break it to you, but those files that "resolved" your problem are IN the sprint carrier cab.
Click to expand...
Click to collapse
You are correct that I incorrectly identified the radio cab as the carrier cab. However, I did an install of the Sprint Carrier Cab (that's how I got the radio). It was the one from the wiki that says it includes radio 3.39.10. You can find it here: http://forum.ppcgeeks.com/showthread.php?t=26119.
Also, I have to press ##775[CALL] in order to get to the PRL screen (as was suggested). Hitting ##775# does nothing. I followed all the instructions. It used to work for me on my previous build (DCD 3.0.4 and Radio 3.35) as ##775# but not since the upgrade.
Either way, copying those 2 files (which did not get installed by the sprint carrier cab) and using ##775[CALL] seems to work just fine.
You can "hate to break it to me" till you're blue in the face that it shouldnt be that way, but that doesnt change the fact that it is. I have no incentive to lie.
You are correct that I incorrectly identified the radio cab as the carrier cab. However, I did an install of the Sprint Carrier Cab (that's how I got the radio). I believe that it was 3.54 (though I dont remember for sure). It was the one from the wiki that says it includes radio 3.39.10.
Also, I have to press ##775[CALL] in order to get to the PRL screen (as was suggested). Hitting ##775# does nothing. I followed all the instructions. It used to work for me on my previous build (DCD 3.0.4 and Radio 3.35) as ##775# but not since the upgrade.
Either way, copying those 2 files (which did not get installed by the sprint carrier cab) and using ##775[CALL] seems to work just fine.
You can "hate to break it to me" till you're blue in the face that it shouldnt be that way, but that doesnt change the fact that it is. I have no incentive to lie.
Click to expand...
Click to collapse
Ok, first of all, I only say this stuff because if I had a dime for every person who doesn't read dcd's first post in his kitchen thread, I'd be a millionaire.
You did NOT install the Sprint Carrier Cab. You installed the Sprint Update Rom to get the radio. Again, that is not the Sprint Carrier Cab that is required for 3.1.6.
The reason you have to use ##775 send and not ##775# like all other Sprint customers, is because you did not install your carrier cab. Without the cab, it defaults to ##775 send.
It worked on 3.0.4 because a carrier cab was not required, instead you picked your carrier in the kitchen.
Lastly, copying those files might have "fixed" your ability to get to EPST or DMRouter, but not the correct way. Also, there are other very important files other than those that you are missing.
Click on dcd's 3.1.6 kitchen thread and read the ENTIRE first post.
Thank you GC. I have installed the Carrier Cab and updated the original post.
bobjase said:
I also tried installing the Phone Codes .cab which adds phone codes to your Programs Menu, but those links do the exact same thing as the EPST.lnk (something flashes for 1/2 second and then is gone).
Click to expand...
Click to collapse
bobjase, can you send me that .cab also. I've been looking all over for it. [email protected] - Thanks!
Related
Hi,
I really want to install the Alltel ROM on my Sprint Mogul. I've searched around and didn't come up with anything, so can someone more knowledgeable on the subject tell me if this is a good idea, or if it's begging to have my phone bricked:
I downloaded the Alltel ROM and extracted its NBH contents using nbhextract. The CID is set to ALLTE001.
I also downloaded the newest Sprint ROM and extracted its NBH contents. That one's CID is set to SPCS_001.
Can I use nbhgen to change the CID of the Alltel ROM to Sprint's?
*edit: Nevermind. Gave this a shot and just got an error from RUU.
Um, yeah you will get an error. And, why are you trying this in the first place?
I use Cricket for my service. I've gotten everything except incoming MMS to work, and the problem is with how Sprint's Data Provisioning is nested in the Mogul's Sprint ROM. There are IOTA settings in the registry, but I really have no idea about how to modify them since Cricket doesn't require any data provisioning.
On my 6700, ArcSoft would automatically dial the connection I had specified in the settings when an MMS arrived. Now, it attempts to connect to Power Vision, and I get an IOTA error about how the device failed to connect to Power and I should contact Sprint. I know that the Alltel ROM would not have these problems.
Another idea that I had was to completely replace my current registry with Alltel's (I have a complete dump), but I'm not too sure how to go about doing that, either. When I restore the file with PHM, the Sprint and Alltel settings just coexist with eachother.
If you have any ideas or suggestions here, they'd be appreciated.
my understanding of crickets data services was that they use simple ip and a proxy for http. have you changed the mogul to use simple ip? i think all you really need is a way of stopping an IOTA aka "vision profile update"
Exactly, but I'm not sure how to go about stopping that. My latest venture is to get someone with an Alltel PPC6800 to take a full SPB backup of the registry, so that their settings will overwrite all of Sprint's.
Do you know of a way to disable IOTA?
to0 said:
Exactly, but I'm not sure how to go about stopping that. My latest venture is to get someone with an Alltel PPC6800 to take a full SPB backup of the registry, so that their settings will overwrite all of Sprint's.
Do you know of a way to disable IOTA?
Click to expand...
Click to collapse
delete the guardian file in Windows startup - then delete the IOTA folder - in program files.. this is what I did to make the mogul work on Alltel before they launched the 6800. I also went through the registry and deleted a couple of IOTA registry keys.. I can't remember where they were though.. Finally, I deleted the error 67 notification in the registry and everything worked perfectly..
Now that the Hard SPL for the device is out you can install the alltel rom directly from the exe after the hard spl is installed.
Yeah I got this going a few days ago. MMS is working perfectly now!
I ran Olipro's unlocker and popped the Alltel ROM WITH the ExtROM and everything works WITHOUT any special consideration. You could say that it "worked straight out the box".
Now the qyestions are 1) now that I've unpacked the RUU_signed.nbh, how do I repack it, and 2) where is the extended rom in the unpacked nbh? I guess these are the big questions for getting Mogul kitchens together and cooking ROMs.
Yeah the Alltel ROM is running pretty well. Definitely an improvement over the stock sprint ROM. Not a huge difference, but it's definitely worth the upgrade until we get some ROM Kitchens/Heavily Modified/Improved ROMs.
don't u guys miss java support?
I can't run opera mini anymore once I switched to Alltel...
Install Esmertec Cloudyfa Java it's better than the builtin on Sprint. Saving space if anything
so how do i get the alltel rom on my sprint mogel? if i am with sprint
eakrish said:
so how do i get the alltel rom on my sprint mogel? if i am with sprint
Click to expand...
Click to collapse
go to ppc geeks and check out the 6800 forum.
instructions are at the top.
Is there a memory difference at all between the 2? If so, what is best to go with? What is the advantage to the Alltel one over the Sprint?...Sorry...kinda a n00b...but not really...lol
hate not having mms - flashin alltel now thanks guys!
This kitchen is based on sprint 3.35 release
NOTE:This is an os rom. radio 3.35 and olipro 2.40 unlocker required.
Features:
* Only 57 mb, includes all tools and everything.
* Very easy to cook. just run buildflash.bat and follow instructions.
* Clean
oem folder has been cleaned, windows live and some other stuff is removed from sys, Every program has its own folder. if you want it to be cleaner just delete related folders from sys folder.
* Adjusted security policies
* based on original sprint release. It is not a remixed version. Almost everthing extracted from original sprint rom, including xip, sys, oem drivers etc.
* Fixed PIE, not freezing anymore.
I have spent lots of time on it and have adjusted lots of stuff that i cant remember.
I have learnt most of stuff from xda-developers.com, ppcgeeks.com, howardforums.com , no2chem and dcd and they are source of some of the packages i have included. So thank you all.
It would not be possible without the wonderfull kitchen tools either.
So please thank them also if you like this kitchen.
Instructions: Just run buildflash.bat and follow instructions.
http://www.megaupload.com/?d=JMST2UF9
March 30 UPDate:
http://rapidshare.com/files/103708242/a1kitchen.zip.html
Disabled extended rom , added some more oem's such as telus mobile email, metrix, x button etc, fixed sprint epst
A1jatt, looking forward to trying this out. Thanks again for the work.
GPS Working?
Also have you noted any issues with the alarms with this Kitchen/Rom.
Also stock dialer OEM'ed??
Sopranokam said:
A1jatt, looking forward to trying this out. Thanks again for the work.
GPS Working?
Also have you noted any issues with the alarms with this Kitchen/Rom.
Also stock dialer OEM'ed??
Click to expand...
Click to collapse
Link is working now.
Yes gps is working, tested with tomtom, windows live and google maps.
No no problems with DST, alarms etc.
Yes stock dialer is OEM'ed.
Link not working?
The file you are trying to access is temporarily unavailable.
etexter said:
The file you are trying to access is temporarily unavailable.
Click to expand...
Click to collapse
Ignore. I got it from megaupload finally.
Thanks for the perfect kitchen...
No bugs, fast, easy to customize and no attempt to install bleeding edge updates!!! This is exactly what I was looking for.
Thanks again!!!
my experience.
Great rom - easy to use, and fast. Although it didn't like being compiled under parallels on Mac OS X, I had no issues with the build file under a windows laptop.
My only problem that i have found (kind of major) is that I can not connect to the internet via #777 on Telus. I have the "Ev" on my title bar, and the internet briefly connects, but quickly drops the connection saying unknown problem. I have no idea why this is happening, but would love a solution
Otherwise google maps, works fine w/ wifi, and I was unable to get tomtom to find the map (no maps found) so have no clue there.
Thanks for the rom, and if anyone has advice on how to resolve my two issues that would be great Keep up the great work.My ex
artiss said:
Great rom - easy to use, and fast. Although it didn't like being compiled under parallels on Mac OS X, I had no issues with the build file under a windows laptop.
My only problem that i have found (kind of major) is that I can not connect to the internet via #777 on Telus. I have the "Ev" on my title bar, and the internet briefly connects, but quickly drops the connection saying unknown problem. I have no idea why this is happening, but would love a solution
Otherwise google maps, works fine w/ wifi, and I was unable to get tomtom to find the map (no maps found) so have no clue there.
Thanks for the rom, and if anyone has advice on how to resolve my two issues that would be great Keep up the great work.My ex
Click to expand...
Click to collapse
That is weird. You might want to try without any add-ons and reprogram your phone via *22803 using option 1 and then option 2 to update prl.
I have flashed 5-6 phones ... have not had single problem in last three weeks.
No body else has complained at ppc or xda yet. Since not even one other person is having same issue, I am guessing it’s not a bug; it’s just your settings.
If you can help me with duplicating the problem on my phone, i probably can fix it.
Tomtom issue is not rom related. Tomtom maps should be stored in folder in the root directory of sd card.
Sure what info would you like to know? I performed the following:
- Installed the Olipro 2.40 unlocker
- Flashed with Sprint Rom 3.35 latest
- Used the buildflash.bat on a windows box to create my install
- Installed the created rom
- Performed a *22803 with option 1 & 2
- Checked with Telus that I do infact have a data plan
- When I connect to the internet either through Opera or IE I get this message "Cannot connect for an unkown reason blah blah please check settings"
Now I have tried with a username & password (esn dec) with no luck. Now with my ignorance I have misplaced the data I wrote down on MSID, NAI, DUN, etc numbers so I have no way of verifiying that data. Now when I installed the sprint rom it started the install its extra stuff after an accidental power cycle - did that fubar stuff? Should I of relocked my phone, reinstall telus, then re-unlock and perform the above steps?
So with tomtom the maps are in the root of the SD? In a dir? Do I have to edit the currentmap.dat file?
Thanks for the quick reply and help - what other info do you want
from here
http://rapidshare.com/files/103173398/Erase_Extended_Rom.zip.html
flash the attached rom ( it includes flashing utility) . it will erase sprint stuff you have in extended rom.. that should fix data problem
tomtom maps should be \\storage_card\usa and canada maps
no need to edit any files
Did that, and re-entered the data for my #777 connection (username and password). Unfortunately I still have no internet. Will keep plugging away. Thanks
However TomTom is working now with maps
artiss said:
Did that, and re-entered the data for my #777 connection (username and password). Unfortunately I still have no internet. Will keep plugging away. Thanks
However TomTom is working now with maps
Click to expand...
Click to collapse
i have followed the steps you lave listed, still i am unable to duplicate the problem.
may be flash telus oem, get data working and then copy every single epst setting before you reflash.
inorder to flash telus oem you will need relocker from ppc site.
EDIT: seems like internet problems are related to sprint customization..
http://forum.xda-developers.com/showthread.php?t=380820
Cant get to epst on sprint either
have you tried ##778<send> and ##778#
? you can also go to windows folder and run epst.exe
a1jatt said:
have you tried ##778<send> and ##778#
? you can also go to windows folder and run epst.exe
Click to expand...
Click to collapse
It dont work either way...codes or windows folder!
How to reinstall
On the Kitchen we have a folder named OEM with some program on it
how is possible to reinstall that progral like "HTC_CommManager_Titan"
Thank You
Alain
NotLutzik said:
It dont work either way...codes or windows folder!
Click to expand...
Click to collapse
here is the fix.
http://rapidshare.com/files/103708242/a1kitchen.zip.html
Per dcd's request, please post in here to discuss anything to do with MMS on 3.1.x roms.
So i was having some questions about this.
I took the mms 5 out of the 3.0.4 rom and put it into the new 3.1.2 rom. Rom works fine. But i can't get mms to work.
I made a new STRING value, named it X-VzW-MDN and put the value my 10 digit number.
when i try to send a picture, it still wont' send.
When it trys to send, it shows the status of it and it is stuck at 0%
then it shows the warning message saying "unable to send your message."
There has to be something i did.. anyone help me? thanks!
registry settings for arcsoft 5 MMS (from 3.0.4 rom)
[HKEY_LOCAL_MACHINE\Software\Arcsoft]
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA]
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config]
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\mm1]
"DefaultSetting"="Verizon Wireless"
"RecvSizeLimitType"=dword:00000001
"SendDelayedNotifyResp"=dword:00000000
"WAP1DefaultPort"=dword:000023f1
"WAP2DefaultPort"=dword:00000050
"LastAckTimeOut"=dword:00000fa0
"DebugPath"="\\My Documents\\UAContents\\MMS Log\\"
"EnableDebug"=dword:00000004
"SuppressDelayedNotifyResp"=dword:00000000
"WTPMaxRetryTimes"=dword:00000008
"ReportAllowed"=dword:00000001
"WAPDefaultTimeout"=dword:00001388
"HTTPDefaultTimeout"=dword:0003a980
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]
"X-VzW-MDN"="insert # here"
"Accept-Charset"="us-ascii;utf-8;iso-10646-ucs-2;ISO-8859-1"
"Profile"="http://uaprof.vtext.com/utstar/xv68k/xv68k.xml"
"User-Agent"="utstar68kv1"
"Accept"="application/vnd.wap.multipart.related"
"Accept-Language"="en"
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\mm1\MMSCSetting]
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\mm1\MMSCSetting\Verizon Wireless]
"ISP"="Verizon Wireless"
"Name"="Verizon Wireless"
"Gateway"=""
"MmscURI"="http://mms.vtext.com/servlets/mms"
"GatewayPort"=dword:00000050
"WAPType"=dword:00000001
"WAP2RecvDefaultSize"=dword:000fa000
"WAP2SendDefaultSize"=dword:0004b000
"ConnectionVia"="{436EF144-B4FB-4863-A041-8F905A62C572}"
"PacketSize"=dword:000003e8
"WAP1SendDefaultSize"=dword:00019000
"WAP1RecvDefaultSize"=dword:00019000
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\Folder]
"BlacklistPath"="\\My Documents\\UAContents\\Blacklist.txt"
"PicturePath"="\\My Documents\\My Pictures\\"
"VideoPath"="\\My Documents\\My Videos\\"
"SoundPath"="\\My Documents\\"
"GenericPath"="\\My Documents\\"
"CannedTextFile"="\\My Documents\\UAContents\\CannedText_0409.bin"
"UnknownPath"="\\My Documents\\UnknownType Files\\"
"RecordPath"="\\My Documents\\"
"EmoticonPath"="\\My Documents\\UAContents\\Emoticon\\"
"SVGFontPath"="\\windows\\Arail.amf"
"UAContentsPath"="\\My Documents\\UAContents\\MMS UA\\"
"TemplatePath"="\\My Documents\\UAContents\\Templates\\"
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\UI]
"MMSAccountName"="MMS"
"FlixSlideCountLimit"=dword:00000001
"EnableSaveAudioObject"=dword:00000000
"EnableRemoveCountryCode"=dword:00000001
"PlayVoiceMailWithSpeaker"=dword:00000001
"MaxVMRecipients"=dword:00000001
"FileSortType"=dword:00000001
"SignatureInLastSlide"=dword:00000001
"IgnoreRoamStatus"=dword:00000000
"MinimumCaptureVideoSize"=dword:00007800
"MinimumCapturePhotoSize"=dword:00001400
"SupportSignatureWhenForward"=dword:00000001
"SupportEXIF"=dword:00000001
"SupportFDN"=dword:00000001
"RecordRatio"=dword:00000050
"Transparency"=dword:00000041
"MMContentClassImageRichSizeLimit"=dword:0004b000
"MMContentClassTextSizeLimit"=dword:00007800
"TransportPath"="\\Windows\\Transport.exe"
"AutoAppendSubject"=dword:00000001
"SendExpiredPDU"=dword:00000001
"SupportSentStatus"=dword:00000001
"EnableForwardWithoutDownload"=dword:00000000
"AlwaysChooseCustom"=dword:00000001
"DownloadHomeNetworkOnly"=dword:00000000
"DefaultResolution"=dword:00000004
"Domain"=""
"EnableGenericPicker"=dword:00000001
"RecordType"=dword:00000001
"MaxDuration"=dword:000927c0
"SlideDuration"=dword:000007d0
"ReservedSpace"=dword:00000400
"CaptureEnable"=dword:00000003
"MinimumRecordSize"=dword:00001400
"ExpirationCount"=dword:00000006
"Expiration1"=dword:00000e10
"Expiration2"=dword:00005460
"Expiration3"=dword:0000a8c0
"Expiration4"=dword:00015180
"Expiration5"=dword:0003f480
"Expiration6"=dword:00000000
"EnableSaveRecord"=dword:00000001
"MaxRecipients"=dword:0000000a
"MaxEmailChars"=dword:00000030
"MinEmailChars"=dword:00000005
"MaxPhoneChars"=dword:00000014
"MinPhoneChars"=dword:00000003
"SupportFavoriteIE"=dword:00000001
"SupportBlackList"=dword:00000001
"SupportEmoticon"=dword:00000001
"AlphaTagDispTxt"=""
"AlphaTag"=""
"MediaPlayerSupportFilter"=".wma;.wmv;.mpeg;.mpg;.asf;.qcp;"
"FilterForGenericObjPickerHide"=".exe;.bat;.dll;"
"FilterForGenericObjPickerShow"="*"
"ImageFilter"=".jpeg;.jpg;.gif;.png;.bmp;.wbmp;.svg;.svgz;"
"AudioFilter"=".midi;.mid;.amr;.wav;.qcp;.awb;.rmi;.aac;.m4a;.mp3;.mp3d;"
"VideoFilter"=".mp4;.3gp;.3g2;"
"MaxSlides"=dword:00000009
"RejectAllMessage"=dword:00000000
"AppendSpaceToSubject"=dword:00000001
"AutoDisconnect"=dword:00000001
"AutoResend"=dword:00000000
"AllowSendReadReport"=dword:00000001
"EnableInsertUTF8BOM"=dword:00000000
"EnableSlideCharsLimit"=dword:00000000
"MaxCharsInSlide"=dword:00002710
"NeedDisplayMsgInfo"=dword:00000000
"NeedDisplayMMSCStatusText"=dword:00000001
"NotificationDisplayTime"=dword:00002710
"ErrorHandleLevel"=dword:00000002
"VoiceMailAccountName"="SMS"
"SMSAccountName"="SMS"
"EmailAccountName"="ActiveSync"
"VoiceMailClassName"="IPM.VoiceMail"
"SMSClassName"="IPM.SMStext"
"MMSClassName"="IPM.MMS"
"EmailClassName"="IPM.Note"
"NeedCheckMsgSize"=dword:00000000
"InboxDispTimeType"=dword:00000000
"EnableSaveObject"=dword:00000001
"StillImageHidePlaybar"=dword:00000001
"NeedInsertRootLayout"=dword:00000001
"InsertTimeStampWhenSending"=dword:00000000
"HideDlgControl"=dword:0041ff68
"ConnectviaMatchById"=dword:00000001
"MMContentClassVideoRichSizeLimit"=dword:0004b000
"MMSEventTimeOut"=dword:0000ea60
"SendDeliveryTimeInAbsolute"=dword:00000000
"SendExpireTimeInAbsolute"=dword:00000000
"DeliveryTimeCount"=dword:00000006
"DeliveryTime1"=dword:00000e10
"DeliveryTime2"=dword:00005460
"DeliveryTime3"=dword:0000a8c0
"DeliveryTime4"=dword:00015180
"DeliveryTime5"=dword:0003f480
"DeliveryTime6"=dword:00000000
"IsDeleteReportAfterRead"=dword:00000000
"IsVoiceMailSupportText"=dword:00000000
"IsSupportDrm"=dword:00000001
"NeedAddSpaceAfterFwRe"=dword:00000000
"AllowAssignDRMPhotoToContact"=dword:00000000
"AllowAssignDRMAudioToRingtone"=dword:00000000
"TelMatchLength"=dword:00000009
"PromptForActiveConnection"=dword:00000000
"HideNotification"=dword:00000001
"PlayerIdleTime"=dword:00001388
"SupportFullScreenPlayer"=dword:00000001
"DefaultCreationMode"=dword:00000002
"CreationFilter"=".txt;.jpg;.jpeg;.gif;.wbmp;.amr;.mid;.midi;.qcp;.mp4;.3gp;.3g2;.vcs;.vcf;.bmp;.png;.wav"
"DenyAnonymousMsg"=dword:00000000
"DenyAdvertisementMsg"=dword:00000000
"EnableServerEdit"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Context]
"SendToMediaAlbum"=dword:00000000
"SendViaMMS"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Context\MMSFilter]
"MMSAudioFilter"=dword:00000007
"MMSVideoFilter"=dword:00000006
"MMSImageFilter"=dword:0000001f
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\UI\SizeLimit]
"Wap2SendCount"=dword:00000003
"Wap2SendLimit1"=dword:00019000
"Wap2SendLimit2"=dword:00032000
"Wap2SendLimit3"=dword:0004b000
"Wap2RecvCount"=dword:00000003
"Wap2RecvLimit1"=dword:000fa000
"Wap2RecvLimit2"=dword:000fa000
"Wap2RecvLimit3"=dword:000fa000
"Wap1SendCount"=dword:00000003
"Wap1SendLimit1"=dword:00019000
"Wap1SendLimit2"=dword:00032000
"Wap1SendLimit3"=dword:0004b000
"Wap1RecvCount"=dword:00000003
"Wap1RecvLimit1"=dword:000fa000
"Wap1RecvLimit2"=dword:000fa000
"Wap1RecvLimit3"=dword:000fa000
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\UI\TryLimit]
"TryDefault"=dword:00000001
"Interval1"=dword:00000001
"Interval2"=dword:00000005
"Interval3"=dword:0000000a
"Interval4"=dword:0000001e
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\UI\SendOption]
"Priority"=dword:00000081
"ExpiryTime"=dword:00000000
"MessageClass"=dword:00000080
"NeedDeliveryReport"=dword:00000000
"NeedReadReport"=dword:00000000
"SendAnonymously"=dword:00000000
"PriorityFac"=dword:00000081
"ExpiryTimeFac"=dword:00000000
"MessageClassFac"=dword:00000080
"NeedDeliveryReportFac"=dword:00000000
"NeedReadReportFac"=dword:00000000
"SendAnonymouslyFac"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\Capture]
"PhotoQuality"=dword:00000002
"VideoFileRatio"=dword:00000050
"VideoMode"=dword:00000002
"PhotoResolutionWidth"=dword:00000280
"PhotoResolutionHeight"=dword:000001e0
"VideoResolutionWidth"=dword:000000b0
"VideoResolutionHeight"=dword:00000090
Thanks!!
But i still can't get it to work.
EDIT!! I got it to work. I copyed some reg values here then it still didnt work. But i went ot the options, it had "1/2" in for the gateway.. hahaha took that out and it was fine.
I am trying to get someone to coment on if their Video MMS on verizon is working correctly. thanks.
These are the COMPLETE instructions on how to have working MMS with Verizon out of the box.
1. Cook your rom and flash (Arcsoft OEM no longer needed from 3.0.4 kitchen).
2. Install Verizon carrier package cab.
3. Install dcd VZW Arcsoft MMS 5.0.31.19 cab.
4. Soft reset.
That's it. Both MMS send and receive should work. Make sure you have an active data connection because you will not be able to send or receive anything without it.
this should work for vz users.
i have not tested it.
this would at least save you one cab install. install this and then create x-vzw-mdn key.
you still need my current vz carrier cab. with this cab, you dont also need the one gcincotta just posted.
edit: after thinking about it, im going to just revise this to include mortscript and throw a small script in startup to set the key... unless anyone disagrees?
edit: use cab posted on page 2
dcd1182 said:
this should work for vz users.
i have not tested it.
this would at least save you one cab install. install this and then create x-vzw-mdn key.
you still need my current vz carrier cab. with this cab, you dont also need the one gcincotta just posted.
edit: after thinking about it, im going to just revise this to include mortscript and throw a small script in startup to set the key... unless anyone disagrees?
Click to expand...
Click to collapse
sounds good to me........does this mean we are getting closer to MMS cabs for all carriers? If u need a tester for cricket, ill be a guinea(sp?) pig again
crwinger said:
sounds good to me........does this mean we are getting closer to MMS cabs for all carriers? If u need a tester for cricket, ill be a guinea(sp?) pig again
Click to expand...
Click to collapse
its not how i want to do it. i want 1 cab that supports everyone. this way is 1 cab that supports 1 carrier.
it at least separates the mms and rom topics, which i think is for the better.
this would at least save you one cab install.
Click to expand...
Click to collapse
Not really...they don't install both verizon carrier package cabs, just the one i posted.
This is better for now though if the mortscript is included to fetch the MDN key though.
Still gotta code that setup.dll though to get rid of the mortscript.
this way is 1 cab that supports 1 carrier.
Click to expand...
Click to collapse
This was only meant to be a temporary fix for vzw users until the proper cab is completed.
gcincotta said:
Not really...they don't install both verizon carrier package cabs, just the one i posted.
Click to expand...
Click to collapse
ohh, gotcha.
ok well, mms/mort cab is done and works.
i didnt realize a mortscript is capable of deleting itself so it will only run in startup once and then dispose of itself.
vz users: install this cab, soft reset, use mms.
(dcd 3.1.3 and later will automatically soft reset after install...)
ohh, gotcha.
ok well, mms/mort cab is done and works.
i didnt realize a mortscript is capable of deleting itself so it will only run in startup once and then dispose of itself.
vz users: install this cab, soft reset, use mms.
(dcd 3.1.3 and later will automatically soft reset after install...)
Click to expand...
Click to collapse
With that said, I'm going to change the instructions then in my post.
dcd, i made two cabs for cricket based off of ur vzw cab with mortscript. Both are working fine as I have quickly tested them. One cab uses only the MMS setup options and same mortscript but i had to change it to X-Cricket-MDN or whatever key it is. The other also incorporates a mortscript mms fix which was made by mooringhorse over at hofo and changes the left softkey and envelope key into scripts to delete the defaultconnectionsettings string if it exists then open the messaging. I can post them and let u see em if ud like? or if any does?
crwinger said:
dcd, i made two cabs for cricket based off of ur vzw cab with mortscript. Both are working fine as I have quickly tested them. One cab uses only the MMS setup options and same mortscript but i had to change it to X-Cricket-MDN or whatever key it is. The other also incorporates a mortscript mms fix which was made by mooringhorse over at hofo and changes the left softkey and envelope key into scripts to delete the defaultconnectionsettings string if it exists then open the messaging. I can post them and let u see em if ud like? or if any does?
Click to expand...
Click to collapse
awesome. of course. post them
MMs
dcd1182 said:
ohh, gotcha.
ok well, mms/mort cab is done and works.
i didnt realize a mortscript is capable of deleting itself so it will only run in startup once and then dispose of itself.
vz users: install this cab, soft reset, use mms.
(dcd 3.1.3 and later will automatically soft reset after install...)
Click to expand...
Click to collapse
I was never able to send mms on 3.0.4. I installed this cab, soft reset and it now works perfectly. The slowness of the acrsoft that came with the 3.0.4 kitchen actually seams inproved also.
I was never able to send mms on 3.0.4. I installed this cab, soft reset and it now works perfectly. The slowness of the acrsoft that came with the 3.0.4 kitchen actually seams inproved also.
Click to expand...
Click to collapse
You probably didn't set it up right then, because MMS worked fine on 3.0.4 as long as it was set up correctly.
highhopes420 said:
I was never able to send mms on 3.0.4. I installed this cab, soft reset and it now works perfectly. The slowness of the acrsoft that came with the 3.0.4 kitchen actually seams inproved also.
Click to expand...
Click to collapse
cool, thanks for the feedback. the cab i posted above should work on any rom, any device.
dcd1182 said:
awesome. of course. post them
Click to expand...
Click to collapse
will post them later im at work and dont have access to them
Worked great.
I flashed 3.39 full sprint rom : stopped at "tap screen"
Ran dcd 3.12 kitchen
Ran Carrier Cab (vzw)
Ran this mms cab
Everything is working good.
I installed the cab attached to this thread immediately after the carrier cab, and I cannot seem to send / receive picture messages. I get the following error:
Code:
Unable to receive your message(s). Your message notification(s) will remain in the inbox.
I have checked my registry and the all the settings match those posted earlier in this thread.
Can anyone offer some suggestions where i might start looking?
Just install the Radio Refurbish.cab.. it should be left in your extended rom from the old vzw rom..
look here.. posted by NexVision..
http://forum.ppcgeeks.com/showpost.php?p=282968&postcount=33
thats why i figured to do before doing all this reflash old roms, etc.. thanx
anyone tried this?
Has anyone here tested this?
madsuse said:
Has anyone here tested this?
Click to expand...
Click to collapse
its not new. its been done in the past to fix VZ users who let Sprint customizations run. I think the trick is properly sending the /Refurbish parameter. I once made a cab with a shortcut to launch the .exe with that parameter, but it seemed to only work for about 50% of people who tested it.
still have cab?
dcd1182 said:
its not new. its been done in the past to fix VZ users who let Sprint customizations run. I think the trick is properly sending the /Refurbish parameter. I once made a cab with a shortcut to launch the .exe with that parameter, but it seemed to only work for about 50% of people who tested it.
Click to expand...
Click to collapse
Is it possible you still have the cab, I loaded Vista and haven't gotten all of my tools working yet.
madsuse said:
Is it possible you still have the cab, I loaded Vista and haven't gotten all of my tools working yet.
Click to expand...
Click to collapse
This is the verizon one.
Thanks
I am a little rusty with cabarc.
Guys, if you read the thread on ppcgeeks, you'll see I've already posted there that I've TRIED radiorefurbish WITH the proper /Refurbish parameter and it does not work.
gc14 said:
Guys, if you read the thread on ppcgeeks, you'll see I've already posted there that I've TRIED radiorefurbish WITH the proper /Refurbish parameter and it does not work.
Click to expand...
Click to collapse
Are you 200% sure that whatever you are using to execute the command is correctly sending the parameter? this is all the verizon customizations do. config.txt should say "EXEC: /Windows/RadioRefurbish.exe /Refurbish"
I know I spoke with NexxVision in the past and he had no problems using it outside of verizon customize. I think I also remember reading that /Refurbish is case sensitive.
I got nowhere with /Refurbish... but when I did /refurbish... that worked.
Are you 200% sure that whatever you are using to execute the command is correctly sending the parameter? this is all the verizon customizations do. config.txt should say "EXEC: /Windows/RadioRefurbish.exe /Refurbish"
I know I spoke with NexxVision in the past and he had no problems using it outside of verizon customize. I think I also remember reading that /Refurbish is case sensitive.
Click to expand...
Click to collapse
Yes I'm 200% sure. I've made my own shortcut link with the parameter included as well as tried with Resco Explorer 2008. Both /Refurbish and /refurbish did not work. Nitro, it must have been a fluke, I don't know what to tell you.
gc14 said:
Yes I'm 200% sure. I've made my own shortcut link with the parameter included as well as tried with Resco Explorer 2008. Both /Refurbish and /refurbish did not work. Nitro, it must have been a fluke, I don't know what to tell you.
Click to expand...
Click to collapse
it works on the Stock original verizon rom. I couldn't get it to work on the latest and greatest. I believe it's WM6 specific. Not 6.1
it works on the Stock original verizon rom. I couldn't get it to work on the latest and greatest. I believe it's WM6 specific. Not 6.1
Click to expand...
Click to collapse
LOL...it really doesn't matter if it works on the stock rom. If you have the stock rom flashed, it already ran as part of customizations. The entire point behind the thread on ppcgeeks was rolling back the PRI without having to flash back to stock, which as I've stated, is not possible.
gc14 said:
LOL...it really doesn't matter if it works on the stock rom. If you have the stock rom flashed, it already ran as part of customizations. The entire point behind the thread on ppcgeeks was rolling back the PRI without having to flash back to stock, which as I've stated, is not possible.
Click to expand...
Click to collapse
I agree... But i've screwed up the phone so many times... I ran it anyway. lol
gc14 said:
LOL...it really doesn't matter if it works on the stock rom. If you have the stock rom flashed, it already ran as part of customizations. The entire point behind the thread on ppcgeeks was rolling back the PRI without having to flash back to stock, which as I've stated, is not possible.
Click to expand...
Click to collapse
its absolutely not impossible. there is no ability that the stock rom gives you that any other rom doesnt. it is simply executed by autorun. other people have been able to run radiorefurbish.exe within custom roms. talk to nexxvision. its an issue of correctly passing the parameter, the exe seems to be touchy.
i've personally rolled my PRI back using radiorefurbish in the past when i was messing with it before. i've never had the verizon stock ROM on my device.
i am sure that if the exe is run with the parameter by autorun (config.txt has to be modified) then it will have the same effect in any rom. if anyone wants to test, it would be a quick change to the UC package.
dcd1182 said:
its absolutely not impossible. there is no ability that the stock rom gives you that any other rom doesnt. it is simply executed by autorun. other people have been able to run radiorefurbish.exe within custom roms. talk to nexxvision. its an issue of correctly passing the parameter, the exe seems to be touchy.
i've personally rolled my PRI back using radiorefurbish in the past when i was messing with it before. i've never had the verizon stock ROM on my device.
i am sure that if the exe is run with the parameter by autorun (config.txt has to be modified) then it will have the same effect in any rom. if anyone wants to test, it would be a quick change to the UC package.
Click to expand...
Click to collapse
Only if I actually felt like pulling my XV6800 out. I really want to wipe the PRI off this Sprint Mogal and get it to the Verizon one. This roaming is annoying. LOL
its absolutely not impossible. there is no ability that the stock rom gives you that any other rom doesnt. it is simply executed by autorun. other people have been able to run radiorefurbish.exe within custom roms. talk to nexxvision. its an issue of correctly passing the parameter, the exe seems to be touchy.
i've personally rolled my PRI back using radiorefurbish in the past when i was messing with it before. i've never had the verizon stock ROM on my device.
i am sure that if the exe is run with the parameter by autorun (config.txt has to be modified) then it will have the same effect in any rom. if anyone wants to test, it would be a quick change to the UC package.
Click to expand...
Click to collapse
I'm not doubting that it's never worked before...because I too have had it work a while ago when I had to roll back from the Sprint PRI. Since then, I've tried to use it on several different occasions on several different roms not changing my method that worked the first time whatsoever, and it does nothing. That's all I'm saying. If you can somehow get it to work, more power to you.
i'll give it a try
dcd1182 said:
its absolutely not impossible. there is no ability that the stock rom gives you that any other rom doesnt. it is simply executed by autorun. other people have been able to run radiorefurbish.exe within custom roms. talk to nexxvision. its an issue of correctly passing the parameter, the exe seems to be touchy.
i've personally rolled my PRI back using radiorefurbish in the past when i was messing with it before. i've never had the verizon stock ROM on my device.
i am sure that if the exe is run with the parameter by autorun (config.txt has to be modified) then it will have the same effect in any rom. if anyone wants to test, it would be a quick change to the UC package.
Click to expand...
Click to collapse
I flashed the new verizon rom and had the customizations run before I knew it was a bad thing. I am on the new verizon radio and dcd 3.2.6.
Just need some prompting on how to run it. I usually flash via sd with uc via sdconfig.
madsuse said:
I flashed the new verizon rom and had the customizations run before I knew it was a bad thing. I am on the new verizon radio and dcd 3.2.6.
Just need some prompting on how to run it. I usually flash via sd with uc via sdconfig.
Click to expand...
Click to collapse
if you just want to try... copy the radiorefurbish.exe to the /Windows directory. Then in Resco explorer... highlight the file... then go to Run... type /refurbish in the paramaters part. If that does nothing... try /Refurbish
Resco Explorer
nitro66215 said:
if you just want to try... copy the radiorefurbish.exe to the /Windows directory. Then in Resco explorer... highlight the file... then go to Run... type /refurbish in the paramaters part. If that does nothing... try /Refurbish
Click to expand...
Click to collapse
Guess I need to fine cab for Resco Explorer.
Found it.
Installing now.
Can someone please upload Alltel PRI 1.28. The reason I need it is that it will get rid of my roaming triangle (have a sprint TP converted to Alltel). I found one over at ppcgeeks, but for some reason don't have permission to download it (even though I'm already registered there). And thanks in advance.
mickeyx323 said:
Can someone please upload Alltel PRI 1.28. The reason I need it is that it will get rid of my roaming triangle (have a sprint TP converted to Alltel). I found one over at ppcgeeks, but for some reason don't have permission to download it (even though I'm already registered there). And thanks in advance.
Click to expand...
Click to collapse
Here: http://forum.ppcgeeks.com/showthread.php?p=888469 Follow the instructions by ksg CLOSELY.
Yeah I saw that, but for some reason I can not download the file. It says that I don't "have permission to access this page." So, I was hoping that someont could upload the file here at xda. But. thank you for you help anyway.
mickeyx323 said:
Yeah I saw that, but for some reason I can not download the file. It says that I don't "have permission to access this page." So, I was hoping that someont could upload the file here at xda. But. thank you for you help anyway.
Click to expand...
Click to collapse
Here you go.. again, follow the instructions CLOSELY from: http://forum.ppcgeeks.com/showthread.php?p=888469
"Instructions to install:
1. Download PPST_080714_VictorC_Alltel_1.28_delta.sa.zip and unzip.
2. Connect your phone with ActiveSync and transfer PPST_080714_VictorC_Alltel_1.28_delta.sa.cab to your phone.
3. Run PPST_080714_VictorC_Alltel_1.28_delta.sa.cab from your phone
4. Using File Explorer (or total commander, or whatever you have...) go to \windows and launch PPST.exe
5. Answer yes at the prompts. Your phone will now reboot.
6. Go to start -> Settings -> Device Information and check to make sure your PRI version is now 1.28_011
7. Dial *228 and then select 1 to program your phone OTA. This should download the latest PRL for you and get your phone back out roaming, etc."
This will upgrade/migrate the PRI on any CDMA Touch Pro or Diamond to the Alltel PRI 1.28. DO NOT RUN THIS IF YOU DON'T WANT TO BE ON AN ALLTEL PRI. Good luck!
Hey thanks for all your help. I really appreciate it.