Hi,
I really want to install the Alltel ROM on my Sprint Mogul. I've searched around and didn't come up with anything, so can someone more knowledgeable on the subject tell me if this is a good idea, or if it's begging to have my phone bricked:
I downloaded the Alltel ROM and extracted its NBH contents using nbhextract. The CID is set to ALLTE001.
I also downloaded the newest Sprint ROM and extracted its NBH contents. That one's CID is set to SPCS_001.
Can I use nbhgen to change the CID of the Alltel ROM to Sprint's?
*edit: Nevermind. Gave this a shot and just got an error from RUU.
Um, yeah you will get an error. And, why are you trying this in the first place?
I use Cricket for my service. I've gotten everything except incoming MMS to work, and the problem is with how Sprint's Data Provisioning is nested in the Mogul's Sprint ROM. There are IOTA settings in the registry, but I really have no idea about how to modify them since Cricket doesn't require any data provisioning.
On my 6700, ArcSoft would automatically dial the connection I had specified in the settings when an MMS arrived. Now, it attempts to connect to Power Vision, and I get an IOTA error about how the device failed to connect to Power and I should contact Sprint. I know that the Alltel ROM would not have these problems.
Another idea that I had was to completely replace my current registry with Alltel's (I have a complete dump), but I'm not too sure how to go about doing that, either. When I restore the file with PHM, the Sprint and Alltel settings just coexist with eachother.
If you have any ideas or suggestions here, they'd be appreciated.
my understanding of crickets data services was that they use simple ip and a proxy for http. have you changed the mogul to use simple ip? i think all you really need is a way of stopping an IOTA aka "vision profile update"
Exactly, but I'm not sure how to go about stopping that. My latest venture is to get someone with an Alltel PPC6800 to take a full SPB backup of the registry, so that their settings will overwrite all of Sprint's.
Do you know of a way to disable IOTA?
to0 said:
Exactly, but I'm not sure how to go about stopping that. My latest venture is to get someone with an Alltel PPC6800 to take a full SPB backup of the registry, so that their settings will overwrite all of Sprint's.
Do you know of a way to disable IOTA?
Click to expand...
Click to collapse
delete the guardian file in Windows startup - then delete the IOTA folder - in program files.. this is what I did to make the mogul work on Alltel before they launched the 6800. I also went through the registry and deleted a couple of IOTA registry keys.. I can't remember where they were though.. Finally, I deleted the error 67 notification in the registry and everything worked perfectly..
Now that the Hard SPL for the device is out you can install the alltel rom directly from the exe after the hard spl is installed.
Yeah I got this going a few days ago. MMS is working perfectly now!
I ran Olipro's unlocker and popped the Alltel ROM WITH the ExtROM and everything works WITHOUT any special consideration. You could say that it "worked straight out the box".
Now the qyestions are 1) now that I've unpacked the RUU_signed.nbh, how do I repack it, and 2) where is the extended rom in the unpacked nbh? I guess these are the big questions for getting Mogul kitchens together and cooking ROMs.
Yeah the Alltel ROM is running pretty well. Definitely an improvement over the stock sprint ROM. Not a huge difference, but it's definitely worth the upgrade until we get some ROM Kitchens/Heavily Modified/Improved ROMs.
don't u guys miss java support?
I can't run opera mini anymore once I switched to Alltel...
Install Esmertec Cloudyfa Java it's better than the builtin on Sprint. Saving space if anything
so how do i get the alltel rom on my sprint mogel? if i am with sprint
eakrish said:
so how do i get the alltel rom on my sprint mogel? if i am with sprint
Click to expand...
Click to collapse
go to ppc geeks and check out the 6800 forum.
instructions are at the top.
Is there a memory difference at all between the 2? If so, what is best to go with? What is the advantage to the Alltel one over the Sprint?...Sorry...kinda a n00b...but not really...lol
hate not having mms - flashin alltel now thanks guys!
Related
Need some advice folks. Currently on an assignment in Australia and have just upgraded my Cingular 8125 to a Dopod 838 Pro. I'm with Telstra. Problem is any time I reboot the phone, the Network Wizard executes and errors out. Fine. I manually load Network settings but then i find out a couple of hours later that my manual settings have just disappeared.
I've scoured this site and see that I can do a variety of things, including loading the latest JasJam ROM. Regardless, whats the issue and short of doing a ROM upgrade (did plenty on my 8125, so it doesnt frighten me) what can i do?
Please advise.
diceman725 said:
Need some advice folks. Currently on an assignment in Australia and have just upgraded my Cingular 8125 to a Dopod 838 Pro. I'm with Telstra. Problem is any time I reboot the phone, the Network Wizard executes and errors out. Fine. I manually load Network settings but then i find out a couple of hours later that my manual settings have just disappeared.
I've scoured this site and see that I can do a variety of things, including loading the latest JasJam ROM. Regardless, whats the issue and short of doing a ROM upgrade (did plenty on my 8125, so it doesnt frighten me) what can i do?
Please advise.
Click to expand...
Click to collapse
Theres a file on DopodAsia's wedsite for Tesltra users, it enables newer settings. You put it in your MyDocs folder on the Dopod, and basically boot up. It uses the file, updates Network Wizard and will work properly. Its due to Tesltra's codes changing and the launch of NextG.
GL
You wont be able to get these files unless you have a dopod serial to register with. I would suggest maybe you flash the newest telstra rom instead of the 838
jac33au said:
You wont be able to get these files unless you have a dopod serial to register with. I would suggest maybe you flash the newest telstra rom instead of the 838
Click to expand...
Click to collapse
you can download the latest Imate ROM from their website which fixes your problem
hmmm weird. try again with attachment for cab file for telstra.
installs other stuff so beware like a proxy changes ie default and wap. all can be undone but gives u ur settings.
just saw this...
after my last post maybe helps u
http://forum.xda-developers.com/showthread.php?t=284812
it is ur device and australia specific.
Thanks folks for so many rapid responses... I was able to get the Network Wizard "fix" from Dopod's Australian service center yesterday. Unfortunately, I purchased the phone from ebay and the previous owner had already registered the serial number, so it's not letting me re-register. I've called Dopod directly to proces my registration, but they've not called me back yet.
simon_darley: will that .cab file set all the required settings on WM6? (I am considering upgrading to WM6, and a Cab file with all the Telstra settings would be nice and easy)
Does it add any of the Telstra software?
telstra aust cabs
the previous cab was the old one from the original rom released when the phone was sold and was incomplete so far as mms and other settings.
attached here is the latest from a new imate rom compulsory for telstra users and in conjunction with telstra proposed phone/data upgrade of their system should work more effectively.
i also use the telstra recommended imate radio upgrade 1.38.30.1 i think it is.
all of which runs perfectly now on wm6 including the wm6 media streaming which imate wm5 requires pvplayer as ms didnt release media streaming until wmK.
so now it works perfectly with foxtel video streaming and in 2 wks should allow simultaneous voice data connectivity which the telstra hw upgrade shouldfix for us.
i also include the my place cab which allows foxtel and videos to stream without using the download mb limits. so if u access foxtel via my place over next g it doesnt count towards the mb usage.
i have all the cabs from the upgrade and post them here for what i used only but in reality u may only need 1 or 2. i have all but installed only 5.
the ext rom in full is on xda dev if u want to download. i dont really know wot the other 3 do so installed and didnt cause any harm.
hmmm something odd nxt post should contain attachments... lost wifi...! bak soon
hmmm truble upload from pda apologies... wifi ... trying again
simon_darley said:
hmmm truble upload from pda apologies... wifi ... trying again
Default_Imate_AUS_HR_V3.30.00.cab (84.9 KB, 2 views)
Click to expand...
Click to collapse
Sorry, I didn't catch what this cab does for the JasJam.
I understand what the other two are for, but this one above I'd like to know before I install it.
Thanks.
dunno wot its 4. caused no harm 4 me.
hey all!!
i'm from Venezuela and i recently purchased a HTC PPC6800 (cdma) and my carrier here didn't activate the GPS...
I'm not new to windows mobile but i'm totally new to ROM upgrading...
the only thing im affraid of is not being able to make calls after the upgrade... since i'm from Venezuela i can't use Sprint configuration...
so here's my question:
WHAT DO I HAVE TO BAKCUP FROM THE FILE "EPST" SO I CAN SET IT UP AFTER THE UPGRADE???
i'll be very much appreciated if any of the Senior members could help me here...
thanxs!!!
Nelson
HTC PPC6800
Caracas - Venezuela
Movilnet
Nelson, there is a few month old utility that can extract an HTC ROM from the device directly to the SDcard. If you have the ROM (*.nbh) of your phone from your carrier then you could use a utility such as DogGuys Kitchen maker to decompile the ROM. What you usually only need is contained in the ..OEM\OPERATORS directory.
If you look at how existing kitchens (and a FAQ on kitchens) are set-up, you'll see that each carrier tends to have its own operators OEM that the end-users selects when building their ROM. Following those templates you can create your own with the files specific to your carrier, and add that to an existing kitchen. Once done, then you can then build your own ROM. Though, with that done, of course the language files for your new OS ROM will be english rather than spanish.
The other possible option is to provide your carrier's OS ROM to the forum here and one of us may have the chance to decompile the necessary files and provide a set-up for you.
...sorry, I'm travelling right now and don't have the chance to go into greater detail or updated links.
whoa! I think u went way over his (and my) head with that one...
I don't think he's looking to cook his own rom, he just wants to install one....and wants to know what info he needs to document before so he can reinstall it properly afterwards..
wow thanks Keystone...
although Dillsnik is right... i read the FAQ on kitchens an it doesn´t sound complicated... but i´m not sure if i´m capable of doing this...
however i will be reading more about this kitchens and cooking my own rom because it sounds very interesting that i can put only the programs i want (wich by the way it´s exactly what i´m looking for), so i´ll be witing here soon asking more questions...
by the way, the main propuse of this thread is still open... and the quistion is in the first post:
WHAT DO I HAVE TO BAKCUP FROM THE FILE "EPST" SO I CAN SET IT UP AFTER THE UPGRADE???
thanks for the quick response!!!!
guys, installing the official Sprint rom before your rom of choice allows your carrier settings to be maintained, so there is no need to back up any of that information. at WORST, you'll have to get your a-key reset, which is a quick call to verizon(or your carrier?). i've only had to do this once, and i've flashed my phone probably 25 times.
install olipro 2.4
run Official Sprint RUU
at 'Tap Here to Set Up Your Device' install your rom of choice
run carrier cab (if its not in the kitchen)
if you try to make a call and receive a 'your phone cannot be authenticated' message, call tech support and dont let them tell you anything, just say 'i had to do a hard reset and now my phone cant authenticate i need a new a-key please.' theyll tell you that its not necessary and will try to do it automatically, then if they cant theyll give you a new a-key and tell you how to apply it.
EDIT: there is no way to view your a-key, which is why you are unable to back it up and why backing up EPST settings is pointless for you.
nelsongruebr said:
wow thanks Keystone...
although Dillsnik is right... i read the FAQ on kitchens an it doesn´t sound complicated... but i´m not sure if i´m capable of doing this...
Click to expand...
Click to collapse
Well, I think Keystone is trying to give you a safeguard. You likely have a ROM that nobody else has a copy of here, and I'd suggest you dump a backup copy of it before you do anything to your device, just in case.
WHAT DO I HAVE TO BAKCUP FROM THE FILE "EPST" SO I CAN SET IT UP AFTER THE UPGRADE???
Click to expand...
Click to collapse
We cant give a definite answer to that because we do not know how your carrier operates.
In theory, the actual Sprint update should backup your programming and restore it for you. I do understand you wanting to have a backup plan, but in that case, I would suggest you record everything.
RESOLVED:
if you are unable to use phone codes (like I was) then you are probably an idiot, just like I am. Go back to DCD's original post and make sure to install a Carrier ROM (linked to very clearly in his first post).
Many thanks to Santehnik for providing a workaround and to GC14 for providing the actual solution.
###################################################################
I just flashed to the new 3.1.6 and am unable to access the phone codes (e.g. ##775#).
I tried entering it into the dialer (as well as ##DIAG#, ##DEBUG#, etc...) numerous times. Resetting my device and trying again. No love.
I also tried running \windows\EPST.lnk and \windows\EPST.exe. What appears to happen is that the program appears to load for 1/2 second and then disappear (presumably it is crashing, though I dont know for sure).
I re-downloaded the ROM on a different machine and reflashed my Titan, but it made no difference.
I also tried installing the Phone Codes .cab which adds phone codes to your Programs Menu, but those links do the exact same thing as the EPST.lnk (something flashes for 1/2 second and then is gone).
I have the Sprint Carrier Cab (3.39.10) installed and i'm on PRI Version 2.03_003 and I can make phone calls.
Has anyone else had this problem? Any suggestions?
Here are what the codes link to:
##778 = ..\Windows\EPST.exe ##778
#33284 = ..\Windows\FieldTrial.exe
#3424 = ..\Windows\DMRouter.exe /DIAG
#38278 = ..\Windows\Fuart.exe Fuart
~~~~~~~~~
Note to self, add that info to the Wiki plus a link to an archive of WM links to execute those functions.
bob, what dialer do you have installed?
First of all use ##778CALL (instead #)
And put files from zip into windows folder.
For me this works
p.s can you send Phone Codes.cab to santehnik.ua""gmail.com
I can't find it
For all of those I need 2 # key presses for them to work. I'm using DCD 3.16 w/ radio 3.39 if it makes a difference.
Also what the heck is fast uart mode? (##38278)
Here are what the codes link to:
* ##778 = ..\Windows\EPST.exe ##778
* #33284 = ..\Windows\FieldTrial.exe
* #3424 = ..\Windows\DMRouter.exe /DIAG
* #38278 = ..\Windows\Fuart.exe Fuart
Click to expand...
Click to collapse
Key two things:
1. FieldTrial, DMRouter, and Fuart are ##33284, ##3424, and ##38278 respectfully.
2. You should point out that for Sprint, there's an extra # at the end instead of pressing Send. (ex. ##778#)
gc14 said:
bob, what dialer do you have installed?
Click to expand...
Click to collapse
I have the default dialer installed. I am using the "stock" DCD 3.1.6 ROM. I havent installed ANYTHING since i reflashed. I dont even have my SD card popped in. It's as clean as you could ask for.
I tried using ##775[CALL] and it does exactly what clicking on EPST.lnk does - it flashes for 1/2 second and then disappears.
I have the Sprint Carrier Cab (3.39.10) installed and i'm on PRI Version 2.03_003 and I can make phone calls.
Click to expand...
Click to collapse
Ok are you sure you installed the sprint carrier cab? 3.39.10 is the radio NOT the carrier cab.
Also on Sprint you have to add a # to the end of the codes. ##775# with NO send. ##775 send is for other carriers.
I hate to break it to you, but those files that "resolved" your problem are IN the sprint carrier cab.
gc14 said:
Ok are you sure you installed the sprint carrier cab? 3.39.10 is the radio NOT the carrier cab.
Also on Sprint you have to add a # to the end of the codes. ##775# with NO send. ##775 send is for other carriers.
I hate to break it to you, but those files that "resolved" your problem are IN the sprint carrier cab.
Click to expand...
Click to collapse
You are correct that I incorrectly identified the radio cab as the carrier cab. However, I did an install of the Sprint Carrier Cab (that's how I got the radio). It was the one from the wiki that says it includes radio 3.39.10. You can find it here: http://forum.ppcgeeks.com/showthread.php?t=26119.
Also, I have to press ##775[CALL] in order to get to the PRL screen (as was suggested). Hitting ##775# does nothing. I followed all the instructions. It used to work for me on my previous build (DCD 3.0.4 and Radio 3.35) as ##775# but not since the upgrade.
Either way, copying those 2 files (which did not get installed by the sprint carrier cab) and using ##775[CALL] seems to work just fine.
You can "hate to break it to me" till you're blue in the face that it shouldnt be that way, but that doesnt change the fact that it is. I have no incentive to lie.
You are correct that I incorrectly identified the radio cab as the carrier cab. However, I did an install of the Sprint Carrier Cab (that's how I got the radio). I believe that it was 3.54 (though I dont remember for sure). It was the one from the wiki that says it includes radio 3.39.10.
Also, I have to press ##775[CALL] in order to get to the PRL screen (as was suggested). Hitting ##775# does nothing. I followed all the instructions. It used to work for me on my previous build (DCD 3.0.4 and Radio 3.35) as ##775# but not since the upgrade.
Either way, copying those 2 files (which did not get installed by the sprint carrier cab) and using ##775[CALL] seems to work just fine.
You can "hate to break it to me" till you're blue in the face that it shouldnt be that way, but that doesnt change the fact that it is. I have no incentive to lie.
Click to expand...
Click to collapse
Ok, first of all, I only say this stuff because if I had a dime for every person who doesn't read dcd's first post in his kitchen thread, I'd be a millionaire.
You did NOT install the Sprint Carrier Cab. You installed the Sprint Update Rom to get the radio. Again, that is not the Sprint Carrier Cab that is required for 3.1.6.
The reason you have to use ##775 send and not ##775# like all other Sprint customers, is because you did not install your carrier cab. Without the cab, it defaults to ##775 send.
It worked on 3.0.4 because a carrier cab was not required, instead you picked your carrier in the kitchen.
Lastly, copying those files might have "fixed" your ability to get to EPST or DMRouter, but not the correct way. Also, there are other very important files other than those that you are missing.
Click on dcd's 3.1.6 kitchen thread and read the ENTIRE first post.
Thank you GC. I have installed the Carrier Cab and updated the original post.
bobjase said:
I also tried installing the Phone Codes .cab which adds phone codes to your Programs Menu, but those links do the exact same thing as the EPST.lnk (something flashes for 1/2 second and then is gone).
Click to expand...
Click to collapse
bobjase, can you send me that .cab also. I've been looking all over for it. [email protected] - Thanks!
Just install the Radio Refurbish.cab.. it should be left in your extended rom from the old vzw rom..
look here.. posted by NexVision..
http://forum.ppcgeeks.com/showpost.php?p=282968&postcount=33
thats why i figured to do before doing all this reflash old roms, etc.. thanx
anyone tried this?
Has anyone here tested this?
madsuse said:
Has anyone here tested this?
Click to expand...
Click to collapse
its not new. its been done in the past to fix VZ users who let Sprint customizations run. I think the trick is properly sending the /Refurbish parameter. I once made a cab with a shortcut to launch the .exe with that parameter, but it seemed to only work for about 50% of people who tested it.
still have cab?
dcd1182 said:
its not new. its been done in the past to fix VZ users who let Sprint customizations run. I think the trick is properly sending the /Refurbish parameter. I once made a cab with a shortcut to launch the .exe with that parameter, but it seemed to only work for about 50% of people who tested it.
Click to expand...
Click to collapse
Is it possible you still have the cab, I loaded Vista and haven't gotten all of my tools working yet.
madsuse said:
Is it possible you still have the cab, I loaded Vista and haven't gotten all of my tools working yet.
Click to expand...
Click to collapse
This is the verizon one.
Thanks
I am a little rusty with cabarc.
Guys, if you read the thread on ppcgeeks, you'll see I've already posted there that I've TRIED radiorefurbish WITH the proper /Refurbish parameter and it does not work.
gc14 said:
Guys, if you read the thread on ppcgeeks, you'll see I've already posted there that I've TRIED radiorefurbish WITH the proper /Refurbish parameter and it does not work.
Click to expand...
Click to collapse
Are you 200% sure that whatever you are using to execute the command is correctly sending the parameter? this is all the verizon customizations do. config.txt should say "EXEC: /Windows/RadioRefurbish.exe /Refurbish"
I know I spoke with NexxVision in the past and he had no problems using it outside of verizon customize. I think I also remember reading that /Refurbish is case sensitive.
I got nowhere with /Refurbish... but when I did /refurbish... that worked.
Are you 200% sure that whatever you are using to execute the command is correctly sending the parameter? this is all the verizon customizations do. config.txt should say "EXEC: /Windows/RadioRefurbish.exe /Refurbish"
I know I spoke with NexxVision in the past and he had no problems using it outside of verizon customize. I think I also remember reading that /Refurbish is case sensitive.
Click to expand...
Click to collapse
Yes I'm 200% sure. I've made my own shortcut link with the parameter included as well as tried with Resco Explorer 2008. Both /Refurbish and /refurbish did not work. Nitro, it must have been a fluke, I don't know what to tell you.
gc14 said:
Yes I'm 200% sure. I've made my own shortcut link with the parameter included as well as tried with Resco Explorer 2008. Both /Refurbish and /refurbish did not work. Nitro, it must have been a fluke, I don't know what to tell you.
Click to expand...
Click to collapse
it works on the Stock original verizon rom. I couldn't get it to work on the latest and greatest. I believe it's WM6 specific. Not 6.1
it works on the Stock original verizon rom. I couldn't get it to work on the latest and greatest. I believe it's WM6 specific. Not 6.1
Click to expand...
Click to collapse
LOL...it really doesn't matter if it works on the stock rom. If you have the stock rom flashed, it already ran as part of customizations. The entire point behind the thread on ppcgeeks was rolling back the PRI without having to flash back to stock, which as I've stated, is not possible.
gc14 said:
LOL...it really doesn't matter if it works on the stock rom. If you have the stock rom flashed, it already ran as part of customizations. The entire point behind the thread on ppcgeeks was rolling back the PRI without having to flash back to stock, which as I've stated, is not possible.
Click to expand...
Click to collapse
I agree... But i've screwed up the phone so many times... I ran it anyway. lol
gc14 said:
LOL...it really doesn't matter if it works on the stock rom. If you have the stock rom flashed, it already ran as part of customizations. The entire point behind the thread on ppcgeeks was rolling back the PRI without having to flash back to stock, which as I've stated, is not possible.
Click to expand...
Click to collapse
its absolutely not impossible. there is no ability that the stock rom gives you that any other rom doesnt. it is simply executed by autorun. other people have been able to run radiorefurbish.exe within custom roms. talk to nexxvision. its an issue of correctly passing the parameter, the exe seems to be touchy.
i've personally rolled my PRI back using radiorefurbish in the past when i was messing with it before. i've never had the verizon stock ROM on my device.
i am sure that if the exe is run with the parameter by autorun (config.txt has to be modified) then it will have the same effect in any rom. if anyone wants to test, it would be a quick change to the UC package.
dcd1182 said:
its absolutely not impossible. there is no ability that the stock rom gives you that any other rom doesnt. it is simply executed by autorun. other people have been able to run radiorefurbish.exe within custom roms. talk to nexxvision. its an issue of correctly passing the parameter, the exe seems to be touchy.
i've personally rolled my PRI back using radiorefurbish in the past when i was messing with it before. i've never had the verizon stock ROM on my device.
i am sure that if the exe is run with the parameter by autorun (config.txt has to be modified) then it will have the same effect in any rom. if anyone wants to test, it would be a quick change to the UC package.
Click to expand...
Click to collapse
Only if I actually felt like pulling my XV6800 out. I really want to wipe the PRI off this Sprint Mogal and get it to the Verizon one. This roaming is annoying. LOL
its absolutely not impossible. there is no ability that the stock rom gives you that any other rom doesnt. it is simply executed by autorun. other people have been able to run radiorefurbish.exe within custom roms. talk to nexxvision. its an issue of correctly passing the parameter, the exe seems to be touchy.
i've personally rolled my PRI back using radiorefurbish in the past when i was messing with it before. i've never had the verizon stock ROM on my device.
i am sure that if the exe is run with the parameter by autorun (config.txt has to be modified) then it will have the same effect in any rom. if anyone wants to test, it would be a quick change to the UC package.
Click to expand...
Click to collapse
I'm not doubting that it's never worked before...because I too have had it work a while ago when I had to roll back from the Sprint PRI. Since then, I've tried to use it on several different occasions on several different roms not changing my method that worked the first time whatsoever, and it does nothing. That's all I'm saying. If you can somehow get it to work, more power to you.
i'll give it a try
dcd1182 said:
its absolutely not impossible. there is no ability that the stock rom gives you that any other rom doesnt. it is simply executed by autorun. other people have been able to run radiorefurbish.exe within custom roms. talk to nexxvision. its an issue of correctly passing the parameter, the exe seems to be touchy.
i've personally rolled my PRI back using radiorefurbish in the past when i was messing with it before. i've never had the verizon stock ROM on my device.
i am sure that if the exe is run with the parameter by autorun (config.txt has to be modified) then it will have the same effect in any rom. if anyone wants to test, it would be a quick change to the UC package.
Click to expand...
Click to collapse
I flashed the new verizon rom and had the customizations run before I knew it was a bad thing. I am on the new verizon radio and dcd 3.2.6.
Just need some prompting on how to run it. I usually flash via sd with uc via sdconfig.
madsuse said:
I flashed the new verizon rom and had the customizations run before I knew it was a bad thing. I am on the new verizon radio and dcd 3.2.6.
Just need some prompting on how to run it. I usually flash via sd with uc via sdconfig.
Click to expand...
Click to collapse
if you just want to try... copy the radiorefurbish.exe to the /Windows directory. Then in Resco explorer... highlight the file... then go to Run... type /refurbish in the paramaters part. If that does nothing... try /Refurbish
Resco Explorer
nitro66215 said:
if you just want to try... copy the radiorefurbish.exe to the /Windows directory. Then in Resco explorer... highlight the file... then go to Run... type /refurbish in the paramaters part. If that does nothing... try /Refurbish
Click to expand...
Click to collapse
Guess I need to fine cab for Resco Explorer.
Found it.
Installing now.
Hello everyone, ill start off by saying im a little new, however im able to follow directions well. I flashed my ppc 6800 to cricket today with a ppckitchen rom. When i put the carrier cab files over to the device and install, for whatever reason it keeps saying cant install to that location select another. both my phone and mem card have ample storage. I downloaded the carrier cab from this website, so im sure the file is ok. can anyone help please. thanks.
***UPDATE***
I tried installing other carriers like alltell just to test them out, and all of them install except the cricket cab file...there must be some weird issue.
Perhaps ask at ppckitchen or ppcgeeks about this... I think most people here are using DCD roms etc. Some roms don't need a carrier cab either.
did you pick a carrier in the kitchen that you cooked? If so then you don't need the carrier cab here as that is only for DCD ROMs and Kitchens.