don't work boot loader - iPAQ rw6828, XDA Atom Software Upgrading

Dear friends,
I have xda atom. Of which model is wm5. Thank to this forum, I installed the rom of "atom exec" model last year. After installing, function of boot loader was lost. I want to install wm6 for atom. Although I have tried lots of rom that I installed from here, nothing is happen. First telephone is doing restart as if the installation is starting. "Please wait" is writing at PC. But although I have qaited for a while, It didn't do anything. Please write me in a easy understandable form what I have to do.
Thanks

Read the wiki it has very clear instructions. I otherwise think that u have a dead bootloader as u have flashed an Atom Exec ROM to Atom.

Related

Please help me...my machine halted when boot up

Dear all...
Since I want to flash my XDA to ppc2003 by SD CARD ,I have cooked a ROM... and use XDAtools to write into a SD CARD, and follow the step what the wallaby site said about SD flash.....but unluckly, when I reset the XDA to the wallaby bootloader, the screen havn't change anything like what had said in the wallaby web site.
It just:
Wallaby Bootloader
v5.17
GSM OK
when I seen that, I think the machine may have problem...so I reset it agan...but the machine already hanged in the O2 screen.....please help me...
Dennis
Please help me anyone.... I am very worried about my machine....
Looks like the "writing ROM process" failed on your device.
You have to reflash your device using a SD-Card and the bootloader.
Don´t know if you have one of those devices, but some other useres also reported, that they aren´t possible to install any WM2003 ROm on their device. Only the PPC2002 ROMs worked....
Stefan

Jiggs Please help me!!!

Hi Jiggs,
Really really need your help...
I've accidentally flashed my O2 atom life to a wrong rom, and it was recovered by a rom named AL1.DIO & ExRom.img which downloaded from xda FTP sites.
The rom was recovered,however for the warranty reason i need to flash back to O2 original firmware. And when try to flash to it I encountered "Wrong Customer ID", can you advise how to bypass the CID check and flash to original ROM?
I've tried on the post stated on http://forum.xda-developers.com/showthread.php?t=293632 but the screen didn't show anything after execute the .exe file.
I do not wish to unlock the CID just intend to bypass it, can you enlightened me?
Your help is greatly appreciated.....
First off sounds like you have some idea what you're doing? (bootloader working?)
Secondly there is no jiggs anymore, he's gone, retired, moved on!
Last but not least he left a torrent of info in the wiki http://wiki.xda-developers.com/index.php?pagename=HTC_Atom start here and read, you may find a solution! good luck bro!
homer285 said:
First off sounds like you have some idea what you're doing? (bootloader working?)
Secondly there is no jiggs anymore, he's gone, retired, moved on!
Last but not least he left a torrent of info in the wiki http://wiki.xda-developers.com/index.php?pagename=HTC_Atom start here and read, you may find a solution! good luck bro!
Click to expand...
Click to collapse
Hi bro,
Thanks for the quick reply.
I'm so sorry I'm a newbie didn't know bout Jiggs already retired
Btw I still manag boot into bootloader, the problem is due to the warranty reason, i need to dump my atom life back to its original state before i send in.
Now I'm still able to use the phone, it's just not in original rom.
Had tried to look around the thread you post to me, but i couldn't find any solution at all. Sigh, hope that someone can englighten me as i totally lost...
so you get the "CID error", whether you flash in bootloader or DSUU mode correct?
what is your bootloader version?(if not original Atom Life?)
<-and have you tried the EBOOT SDCard (this may not work for Atom Life) method to restore bootloader if not as stated above?
homer285 said:
so you get the "CID error", whether you flash in bootloader or DSUU mode correct?
what is your bootloader version?(if not original Atom Life?)
<-and have you tried the EBOOT SDCard (this may not work for Atom Life) method to restore bootloader if not as stated above?
Click to expand...
Click to collapse
Hi bro,
My boot loader version is H3 - v0.79.
try both either to flash the official O2 rom from bootloader or window both are encountered 'Error - Customer or Model ID error'
Still have any solution?
Many thanks at all...
Cheers!
kenzojoey:: don't worry. its v simple. first connect USB, enter boot loade, RUN ur Upgrade, after finishing extrect, last STEP "NEXT" to strat up grade, after clicking NEXT immediately press u,r Keybord "DOWN ROW" it will work. good luck

Help~ Atom Exec How to downgrade to WM5

Please check it out for the latest news at here.
http://forum.xda-developers.com/showthread.php?t=362338
I make the upgrade from WM5 to WM6 by the following post.
ATOM EXEC WM6 AKU0.7a.0 WWE 20071117A1WWE with STK
ATOM EXEC WM6 0.7b.0 WWE 20071216A3WWE
But I reaily can not accept the Bluetooth headset can not use for phone.
I want to downgrade to my default OS, WM5.
I had downloaded the Offical WM5 roms in my computer.
But I tried to downgrade by DSUU directly after the Atom Exec sync with PC.
The error message prompted with "Error Country ID or Device id Error"
I also tried in other mode, (Camara + Reset)
It can detect the CE IMAGE ROM, but unable to detect the Device Rom version.
So the DSUU will show the error "Error: Connection Error."
How can I downgrade the device the Atom Exec to WM5 ?
have you tried MN1 EBOOT?
http://forum.xda-developers.com/showthread.php?p=1684559&highlight=EBOOT.NB0#post1684559
My friend admin88hk be very careful while playing with the bootloader using sdcard or u will have a bricked device like mine . Read the complete forums on upgrade of atom exec then proceed with caution and cross ur fingers during the procedure.
hmmm.... try this first before you flash with SD Card
http://forum.xda-developers.com/showthread.php?t=335271
cheers,
TJ
Is it follow by this step, the device can be fully backwaard to WM5, if all of the step are success.
After that, the O2 connect and O2 Software can be used or not ?
I am looking for a success case.
Is there anyone has been done the steps which are posted about MN1 EBOOT??
Can reply me or give me confidence?? Thanks.
am looking for a success case.
Is there anyone has been done the steps which are posted about MN1 EBOOT??
Click to expand...
Click to collapse
Well it certainly has'nt been thought up on a whim, if thats what you're thinking.
Search and find your confidence mate, heck the link has been given to you!
This topic has been discussed in detail in all main Atom threads, try the link given by tjlabias(<-- btw hope you're well mate! ) after if no success then EBOOT method
I have follow the instructurtion for go back to WM5.
But I get a problem in the step 3.
I have download the EBOOT.nb0 and copy to MiniSD card.
After I insert into Atom EXEC, Press camera+reset.
The Screen will post the transfer in completed after 3 - 5 seconds the screen was load.
But the Atom EXEC was not action come out after the following 3 minutes.
So I press camera+reset again.
The screen still at MN2......
How can I change the bootloader to MN1........
any other solution to do it ?
I am reaily can not stand for the phone can not use the Bluetooth headset.
I also has found a some threads also related, but all of them is not work.
http://forum.xda-developers.com/showthread.php?t=331818
This case was very seems with me.
* I am uploading the image to webhost, I will update the post ASAP.
edit: I searched further and found that it could be done. Sorry for the unnecessary post!
-----
on a side note, is it possible to use the ROMs shown here for WM6 on my o2 which currently has WM5? Or do I first have to get an official upgrade to WM6 and then install the new ROMs here?

Help!! Installed Atom EXEC rom on an ATOM!

I am very confused and sad right now
Basically the Atom was bought over the internet
with the seller advertising it as Atom Exec
and that is why I installed Atom Exec modified ROM.
Now he has e-mailed me saying that he actually
sold me an Atom.
Now I am getting massive problems, my Atom now
has an Atom Exec ROM and the screen cannot display
photos properly and it almost seems as if it is running
on 256 Colours. I am also getting massive screen flickering
although I have not installed any CPU increaser or anything.
When I try to upgrade the ROM using DSUU (the way I installed
Atom EXEC) it tells me that the Device ID or Country is wrong.
I have THOROUGHLY read the Wiki and the forum and tried
a Bootloader mode but when I put the eboot in my MiniSD and
go into bootloader it instantly says download complete and
when I try to upgrade it it does not work telling me to do it on
OS first.
I am not even sure if this community is alive or dead
I am just very confused since I am still a student and
I've spend all my pocket money buying this phone...
If someone IS out there, please give me a hand!
there is a solution...try searching the forum manually sometimes search doesn't help
i know i saw some threads about people flashing wrong roms
or if you want send him the phone back and request money because you bought it as an exec which is more expensive then atom...well he could make it as it happened accidently,but it might be a trick to sell the phone for more money
first of all thanks for replying.
I have managed to search and find
some stuff about wrong ROM flashing and
currently I am reinstalling an Atom ROM
over my existing ROM... hope this will solve
all the '256 colour' and flickering problems..
Again, thank you for helping me
I will post the results ASAP.
You can go through this.
http://forum.xda-developers.com/showthread.php?t=358442
JingerCha said:
I am very confused and sad right now
Basically the Atom was bought over the internet
with the seller advertising it as Atom Exec
and that is why I installed Atom Exec modified ROM.
Now he has e-mailed me saying that he actually
sold me an Atom.
Now I am getting massive problems, my Atom now
has an Atom Exec ROM and the screen cannot display
photos properly and it almost seems as if it is running
on 256 Colours. I am also getting massive screen flickering
although I have not installed any CPU increaser or anything.
When I try to upgrade the ROM using DSUU (the way I installed
Atom EXEC) it tells me that the Device ID or Country is wrong.
I have THOROUGHLY read the Wiki and the forum and tried
a Bootloader mode but when I put the eboot in my MiniSD and
go into bootloader it instantly says download complete and
when I try to upgrade it it does not work telling me to do it on
OS first.
I am not even sure if this community is alive or dead
I am just very confused since I am still a student and
I've spend all my pocket money buying this phone...
If someone IS out there, please give me a hand!
Click to expand...
Click to collapse
follow this simple steps:
1. download original ROM from o2/MWG website
2. flash the unit with the original ROM.
your unit should be restored.
Execute any Atom rom, goto Win/Temp<-PC, copy EBOOT.nb0 and save it somewhere.
Execute the Atom Exec rom you currently have installed and replace EBOOT.nb0.
Once finished you will then be able to flash back to Atom rom via bootloader.

help installing WM6.1 (ive read everything i can find)

Hi,
I have a MWG AtomLife running windows mobile v6 i have been trying to install version 6.1 using DSUU.
I get 1 of 2 problems using 2 different version of 6.1 the first problem is
Everything starts off fine, phone softresets but it boots into windows and the DSUU says it failed to connect. No damage to phone.
the seconed problem is it says the country region (or somthing along thoses lines) is wrong and its not compatible with my phone.
I would just like to point out this is MWG not a 02 i got this phone from Portix (the uk disti for MWG) 2 days ago.
Any advice is muchly appricated as i said i have read the wiki, every post i can find on it all the how-tos in the various version but to no avail.
Thanks
FL1X (not fl1c i typod while creating my username how annoyingly rookie of me)
PS> this is the version of 6.1 i was trying to install (using the inbuilt installer and also "pcinstaller1.zip" from another thread) http://forum.xda-developers.com/showthread.php?t=413950 I know it says Exec so i tried this one http://forum.xda-developers.com/showthread.php?t=360664 again to no avail.
Update: just tried http://forum.xda-developers.com/showpost.php?p=2433912&postcount=112 again same problem of the phone softresetting and booting back up loseing connection failing to install.
Hi, if you want to upgrade to WinMo 6.1then you cannot upgrade via DSUU. It is not possible till a DSUU is developed.
For upgrading you would need to use the SD card. Procedure is given in the last link you had visited.
P.S. Do not use ATOM Exec and HP update utilities on Atom Life. You might brick it.
Thanks Maniac, i will look into doing it that way over the weekend, in the event i brick it how can i return it back to the original version of wm6?
'brick it' means ur phone is dead. the term is kind of a metaphor. u can use ur phone as a brick

Categories

Resources