Please check it out for the latest news at here.
http://forum.xda-developers.com/showthread.php?t=362338
I make the upgrade from WM5 to WM6 by the following post.
ATOM EXEC WM6 AKU0.7a.0 WWE 20071117A1WWE with STK
ATOM EXEC WM6 0.7b.0 WWE 20071216A3WWE
But I reaily can not accept the Bluetooth headset can not use for phone.
I want to downgrade to my default OS, WM5.
I had downloaded the Offical WM5 roms in my computer.
But I tried to downgrade by DSUU directly after the Atom Exec sync with PC.
The error message prompted with "Error Country ID or Device id Error"
I also tried in other mode, (Camara + Reset)
It can detect the CE IMAGE ROM, but unable to detect the Device Rom version.
So the DSUU will show the error "Error: Connection Error."
How can I downgrade the device the Atom Exec to WM5 ?
have you tried MN1 EBOOT?
http://forum.xda-developers.com/showthread.php?p=1684559&highlight=EBOOT.NB0#post1684559
My friend admin88hk be very careful while playing with the bootloader using sdcard or u will have a bricked device like mine . Read the complete forums on upgrade of atom exec then proceed with caution and cross ur fingers during the procedure.
hmmm.... try this first before you flash with SD Card
http://forum.xda-developers.com/showthread.php?t=335271
cheers,
TJ
Is it follow by this step, the device can be fully backwaard to WM5, if all of the step are success.
After that, the O2 connect and O2 Software can be used or not ?
I am looking for a success case.
Is there anyone has been done the steps which are posted about MN1 EBOOT??
Can reply me or give me confidence?? Thanks.
am looking for a success case.
Is there anyone has been done the steps which are posted about MN1 EBOOT??
Click to expand...
Click to collapse
Well it certainly has'nt been thought up on a whim, if thats what you're thinking.
Search and find your confidence mate, heck the link has been given to you!
This topic has been discussed in detail in all main Atom threads, try the link given by tjlabias(<-- btw hope you're well mate! ) after if no success then EBOOT method
I have follow the instructurtion for go back to WM5.
But I get a problem in the step 3.
I have download the EBOOT.nb0 and copy to MiniSD card.
After I insert into Atom EXEC, Press camera+reset.
The Screen will post the transfer in completed after 3 - 5 seconds the screen was load.
But the Atom EXEC was not action come out after the following 3 minutes.
So I press camera+reset again.
The screen still at MN2......
How can I change the bootloader to MN1........
any other solution to do it ?
I am reaily can not stand for the phone can not use the Bluetooth headset.
I also has found a some threads also related, but all of them is not work.
http://forum.xda-developers.com/showthread.php?t=331818
This case was very seems with me.
* I am uploading the image to webhost, I will update the post ASAP.
edit: I searched further and found that it could be done. Sorry for the unnecessary post!
-----
on a side note, is it possible to use the ROMs shown here for WM6 on my o2 which currently has WM5? Or do I first have to get an official upgrade to WM6 and then install the new ROMs here?
Related
If you need PM
I modified the Atom exec's ExendedROM.img So it can be use in our Normal Atom!!!
Please NOTE:
unrar 5 rar package to C:\windows\TEMP
run device Software Update Utility.exe install!!!
Enjoy!!!
This pic is snap by CHT version
ENU version is same Ext0033 8)
Kobefei,
Have you tested it? Does it solve the Screen flieckering problem or we still need to keep the Batery charged?
Read in the forum that the BOOTLOADER funtionality wasnt avaible in this EXEC ROM, turning a little bit more dificult to upload the original Atom ROM. Would u know if this is still happening in this "upgraded" version?
Many Thanks,
Ph4nt0m
Ph4nt0m said:
Kobefei,
Have you tested it? Does it solve the Screen flieckering problem or we still need to keep the Batery charged?
Read in the forum that the BOOTLOADER funtionality wasnt avaible in this EXEC ROM, turning a little bit more dificult to upload the original Atom ROM. Would u know if this is still happening in this "upgraded" version?
Many Thanks,
Ph4nt0m
Click to expand...
Click to collapse
My sentiments exactly. Will this ENU version solve or i should say NOT have the flickering problem and the bootloader problem when reverting back to the original atom rom. I hope soooooo!!! Thanks for the hard work!!!
Has anyone tried this modified Rom atom exec 20060721 on ATOM.
I'm using ROM ATOM EXEC 20060614. This Rom is very good!!!
Cools !!! :lol:
lol
lol
lol
They are captured from a forum and I summarized them as followings.
Possible outcomes after flashing atom with exec rom 20060721.
1) Flickering screen if you REMOVE the battery (so stay away from exec roms if you plan to remove battery once a while, or you occasionally or accidentally deplete the battery). A possible reason is real atom exec use a different screen type (or hardware revision), as it show hardware revision "B" in system information of a real atom exec (later model)
2) New July exec rom does not allow you to return to any previous rom versions, neither via usb ActiveSync update nor bootloader mode, in fact, the bootloader mode in this version does not allow you flash any rom versions, if you try to flash rom in bootloader mode, it will stop and display "pls update in OS mode and synchronised"
3) Can't make a call without using bluetooth or headset, other people can't hear me when using phone mic. Some even added that other cannot hear voice from atom via headset.
A way to do it if you still want to proceed the update .
1) Run atom 0426 rom update program, after the DSUU program extracted the files, don't click "next", go to windows/temp folder, copy those files extracted, except "diskimage_Ver.nb0" and "ExtendedRom.img", then save them somewhere else.
2) Run july exec rom update program, after the DSUU program extract the files, don't click "next," go to windows/temp folder, overwrite with the files you just saved, this will leave only the diskimage_Ver.nb0 & ExtendedRom.img files as of the july exec rom, others become atom rom files, including an older bootloader which allows you to flash back other roms.
3) Flash.
thank you
Kyo said:
They are captured from a forum and I summarized them as followings.
Click to expand...
Click to collapse
Thank You! Seems that we should wait for a oficial Atom Update....
Thanks a lot buddy
I just want to know is how to backup the original rom,
using romupdate???
OK
Really cool
I installed the Atom Exec modified update on my Atom. And i tried to install the Old Rom Upgrade of Atom, am getting Country Id or Device Id error. Can anyone help me to install my old Atom ROM upgrade.
Try a hard reset. That should solve it.
Is it impossible to restore 426 after "full install" 0712? My screen flickering much and make me dizzy. Hope someone can help... thx
hard reset can't help. restore 0426 rom impossible.
If you want to revert to the 0426 rom, from the 0721 rom. Copy the eboot file from the 0426 installation to you miniSD card and go to bootloader, when its done you can install the 0426 rom again.
regards
yass
Just wondering if anyone out there would be kind enough to upload one of the new Atom Exec roms, edited to re-include the bootloader option (for installation on an 'old' Atom).
The 20060915 rom (not convinced the 20060721 is really the latest being it came out a while back ... and of course there's the name) with R060822N_MN2ARC_RS00013 radio update would be ideal - but as I'm looking to do a housekeeping reflash, any update from the old edited 0721 mod_n-fix rom will be greatly appreciated.
I have upload Roms but i d'ont know if you want those one!
bedav - thanks for the uploads, preferably am looking for a modified 0915 rom ... anyone out there got one ?
V.V.V.Urgent help please
I am stuck with the O2 Atom Exec Rom Version: 20060915 on the Atom and am unable to remove or re-rom any other version. I tired the bootloader mode: Camera+reset but it will not overwrite it and give a USB error. Can anyone tell me how to get rid of it.
****THANKS I HAVE BEEN ABLE TO SOLVE THE PROBLEM****
I got rid of the Atom and bought an Imate JasJam. Much Better Pocket PC Phone on comparision. Slower and a bit more complex but better in features and works well. It is also well supported in Mumbai, India.
THANK YOU ALL.
hsanghavi said:
I am stuck with the O2 Atom Exec Rom Version: 20060915 on the Atom and am unable to remove or re-rom any other version. I tired the bootloader mode: Camera+reset but it will not overwrite it and give a USB error. Can anyone tell me how to get rid of it.
Click to expand...
Click to collapse
I suggest you search through the forum, the solution has been discussed in detail, dont use the SD card to flash back unless you're 100% sure you know what you're doing. What you need to do is dl the edited 60721 rom and flash then you will be able to downgrade rom.
I can't find any of the edited roms on the ftp. Where to get?
try to reupgraded from boot loader!!
HELP
My Atom Exec can't boot, just bootloader only. can't reflash from Device Software Update Utility.exe,
PC report = ERROR: CONNECTION ERROR
Atom report = please use dsuu in os mode and sync with PC first! usb transfer fail
I'm tried rename diskimage_Ver.nb0 to diskimg.nb0, and copy EBOOT.nb0 to SD to SDDownload success, but same can't boot
help me
THANKS!!
silverkuo said:
My Atom Exec can't boot, just bootloader only. can't reflash from Device Software Update Utility.exe,
PC report = ERROR: CONNECTION ERROR
Atom report = please use dsuu in os mode and sync with PC first! usb transfer fail
I'm tried rename diskimage_Ver.nb0 to diskimg.nb0, and copy EBOOT.nb0 to SD to SDDownload success, but same can't boot
help me
THANKS!!
Click to expand...
Click to collapse
User activesync to update the ROM.
@all
anyone have a solution on how to downgrade rom..
i have a ATOM and upgraded to ATOM EXEC rom..
theres some guide in here but its inside of other thread and its not working..
please help us..i know im not the only one have a problem like this..
thanks in advance..
-=[serialzs]=-
If you have Atom Exec ROM, then the bootloader keys are Camera+Reset. If you can enter bootloader, you can now upgrade to the usual XDA Atom ROM.
Cheers,
Jiggs
jiggs said:
If you have Atom Exec ROM, then the bootloader keys are Camera+Reset. If you can enter bootloader, you can now upgrade to the usual XDA Atom ROM.
Cheers,
Jiggs
Click to expand...
Click to collapse
where i can put the bootloader? can you help me? please..
-=[serialzs]=-
serialzs said:
where i can put the bootloader? can you help me? please..
-=[serialzs]=-
Click to expand...
Click to collapse
press camera+reset button. you should see bootloader screen. From here, upgrade using the procedure I discussed in the aku3.3 thread.
cheers,
Jiggs
thanks for the help but i figure it out on my own now..i done it with something i dont think earlier because im too excited..hehe..
now i have a atom rom back again..
i will guide people have same problem..hope i can help..
-=[serialzs]=-
o2 atom upgrade problem
hi
i need ur help
i have o2 atom i upgrade to exec now i can not go back
it give me error in connection
please help
all_brother2002 said:
hi
i need ur help
i have o2 atom i upgrade to exec now i can not go back
it give me error in connection
please help
Click to expand...
Click to collapse
what version of atom exec you use?
-=[serialzs]=-
Well, I managed to downgrade my ROM back to the original Atom (my sig isn't updated - had problems with the extROM wiping itself) - but I was kinda lucky.
Y'see, the AE hack rom I use has an updated bootloader that won't let you do a USB firmware update unless you're activesync'd.
The only way to solve an ExtROM wipe was to reflash the device, so I did. Using the hack ROM DSUU - at this point, the original ROM won't recognize the device - I found that it usually takes a few tries for the extROM update to go through (extROM format fail) - when it fails, your phone will be stuck in bootloader (Connect a USB cable). Repeated attempts to flash the phone solves the problem.
So when my extROM inevitably disappeared again, and I hit the extROM format fail again, I decided I had enough and tried using the original Atom0426-0822 ROM.
It went through this time.
Seems that the only way to bypass the bootloader lock is to semi-brick your device. >_>
Just a question to all of you who are more experienced than me
I want to change my atom exec wwe to cht, can anyone tell me how to bypass the device country id error. do i use an spl? and are these spl programs device specific? or do i use the bootloader mode? Can someone explain that to me?
Thanks all in advance.
Bootloader mode works as long as you aren't using the Atom Exec hacked ROM (bootloader will tell you to use Async if you try). To upgrade, go into the bootloader, connect via USB, and run the DSUU from the computer.
You know you did it correctly when your unit's current firmware information is read as "0" by the DSUU/
Ultimate Chicken said:
Bootloader mode works as long as you aren't using the Atom Exec hacked ROM (bootloader will tell you to use Async if you try). To upgrade, go into the bootloader, connect via USB, and run the DSUU from the computer.
You know you did it correctly when your unit's current firmware information is read as "0" by the DSUU/
Click to expand...
Click to collapse
Strange, i already did that, and got the "0" from DSUU, but when i start upgrading, the bootloader spits out a message saying that i should connect with OS mode.
Anyway, I've edited the diskimage_Ver.nb0 file to do it.
Hi,
I have the same problem :
- bootloader : ok
- firmware 0 : ok
but connection error !
Do you have an idea ?
Thanks a lot.
bedav said:
Hi,
I have the same problem :
- bootloader : ok
- firmware 0 : ok
but connection error !
Do you have an idea ?
Thanks a lot.
Click to expand...
Click to collapse
Hi guy the main key on the file call EBOOT everytime when you want dowgrade your OS to normal ATOM just put this file to you SD card then use the bootloader mode you can see "imge downloading" just wait for a second it will reboot again . then you can use the DSU mode to flash your device
thats work !
Thank you very much !
HELP on my atom exec
w/o reading, i downgraded my atom exec to atom...
hw can i bring back my atom exec default WM5 ROM?...
am planning to upgrde to WM6 aftr...
I have a jasjam
i was upgrading it using the telstra WM6 rom.
during the upgrade it was around 15% that the upgrade utility show the error that device cannot connect.
my device is bricked now
IT is not KITL enabled
it the first splash screen it shows no gsm
it only shows the bootloader menu
IPL 1.04
SPL 2.03
i read the wiki on how to unbrick a bricked hermes but there is no sulotion
plzzzzzzzz
anyone can help me??????
koorosh_bsboys said:
I have a jasjam
i was upgrading it using the telstra WM6 rom.
during the upgrade it was around 15% that the upgrade utility show the error that device cannot connect.
my device is bricked now
IT is not KITL enabled
it the first splash screen it shows no gsm
it only shows the bootloader menu
IPL 1.04
SPL 2.03
i read the wiki on how to unbrick a bricked hermes but there is no sulotion
plzzzzzzzz
anyone can help me??????
Click to expand...
Click to collapse
Did you also read the wiki to see how to install hardspl to protect your device BEFORE flashing ?(here: http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27 )? Are you using Olipro hardspl?
Try to use the SDCARD method (Format a sdcard in FAT32. Copy the nbh file on it and rename it HERMIMG.NBH. Insert the card and HR : OK/POWER/Soft reset. Follow the instructions)
i tested that but didn't help
does anybody have any suggestion??
Try solution to reeboot ( sometimes helps)
1. get out SIM and SD card
get mtty http://forum.xda-developers.com/download.php?id=9864
2. Make BL mode on Hermes
2a on PC ActiveSync - coonection properties untick allow to connect by USB
3. start mtty on PC , choose USB and enter.
4. next enter.
5. type set 14 and enter
6. type task 8 and enter
OS have to boot if no go to 7
7. enter
8 type set 16 and enter
9. type task 8 and enter
Hope that will boot
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Pretty much all the info on unbricking is in this table by Pof. If this doesn't sort you out then you're have to send it off to imeicheck etc for repair.
The history so far
I have bricked my jasjam while updating to telstra wm6
I have not super CID my device before upgrading to telstra wm6
Now my device freezed at second splash screen
IPL 1.04
SPL 2.03
NO GSM
when i used the info 6 command on mtty it says NO CID
i can not upgrade my device from SD CARD (memory stick)
i used these command on MTTY.exe but no improvement
set 14
task 8
set 16
task 8
when i tried to rom upgrade using any ruu (ruuwraper,.....) it only shows 1% and my device reboots and ....
any suggestions????
I hope you understand this, Basically if
1. You have a "No GSM"
2. Your CID is corrupted
3. Your OS has no KITL mode
4. You didn't use HARDSPL...
Then your phone is screwed, and you need to buy a new one or send it to repair.
Hope you have better luck with your next phone. (you seem to be collecting bricked phones!)
Wam7 said:
4. You didn't use HARDSPL...
Click to expand...
Click to collapse
That's the BIGGEST mistake u ever made with ur Jasjam, bro
try to send to repair centre, if repair cost is too much. Than u have to decide try but new gadget. Kaiser looks flirt to me
yep im glad i waited to upgrade from the proper wm5 to the proper wm6
st3v3 said:
yep im glad i waited to upgrade from the proper wm5 to the proper wm6
Click to expand...
Click to collapse
Did u mean, u stay at proper WM5 or already Flash to WM6 ?
I think everything is save IF we read carefully the disclaimer from the author
ermenzegna said:
Did u mean, u stay at proper WM5 or already Flash to WM6 ?
I think everything is save IF we read carefully the disclaimer from the author
Click to expand...
Click to collapse
The offical I-mate telstra Jasjam rom for WM6 came out recently previous to that i just kept the original WM5 rom that it came with much to the dismay of my peers, actually considered it a few times but decided against it till the official rom came out.
yeah if you follow the instructions for the WM6 rom you use it should be ok however the "Murphys law" of programming tends to suggest there will always be an error that they dont allow for.
st3v3 said:
The offical I-mate telstra Jasjam rom for WM6 came out recently previous to that i just kept the original WM5 rom that it came with much to the dismay of my peers, actually considered it a few times but decided against it till the official rom came out.
yeah if you follow the instructions for the WM6 rom you use it should be ok however the "Murphys law" of programming tends to suggest there will always be an error that they dont allow for.
Click to expand...
Click to collapse
This has NOTHING to do with only using official Roms! One has pretty much the same chance of bricking their phone evening using an official WM6 as a cooked variant from Schaps et al..
Simply put if you don't use HardSPL then you're asking for trouble no matter what the ROM. You should also use the MicroSD wherever possible as it is much more reliable.
imei check use jtag to fix this
imei check use jtag to fix this ,CAn we use jtag to fix this in hermes. need help to resovle spl 2.03 cid locked no gsm.
I am very confused and sad right now
Basically the Atom was bought over the internet
with the seller advertising it as Atom Exec
and that is why I installed Atom Exec modified ROM.
Now he has e-mailed me saying that he actually
sold me an Atom.
Now I am getting massive problems, my Atom now
has an Atom Exec ROM and the screen cannot display
photos properly and it almost seems as if it is running
on 256 Colours. I am also getting massive screen flickering
although I have not installed any CPU increaser or anything.
When I try to upgrade the ROM using DSUU (the way I installed
Atom EXEC) it tells me that the Device ID or Country is wrong.
I have THOROUGHLY read the Wiki and the forum and tried
a Bootloader mode but when I put the eboot in my MiniSD and
go into bootloader it instantly says download complete and
when I try to upgrade it it does not work telling me to do it on
OS first.
I am not even sure if this community is alive or dead
I am just very confused since I am still a student and
I've spend all my pocket money buying this phone...
If someone IS out there, please give me a hand!
there is a solution...try searching the forum manually sometimes search doesn't help
i know i saw some threads about people flashing wrong roms
or if you want send him the phone back and request money because you bought it as an exec which is more expensive then atom...well he could make it as it happened accidently,but it might be a trick to sell the phone for more money
first of all thanks for replying.
I have managed to search and find
some stuff about wrong ROM flashing and
currently I am reinstalling an Atom ROM
over my existing ROM... hope this will solve
all the '256 colour' and flickering problems..
Again, thank you for helping me
I will post the results ASAP.
You can go through this.
http://forum.xda-developers.com/showthread.php?t=358442
JingerCha said:
I am very confused and sad right now
Basically the Atom was bought over the internet
with the seller advertising it as Atom Exec
and that is why I installed Atom Exec modified ROM.
Now he has e-mailed me saying that he actually
sold me an Atom.
Now I am getting massive problems, my Atom now
has an Atom Exec ROM and the screen cannot display
photos properly and it almost seems as if it is running
on 256 Colours. I am also getting massive screen flickering
although I have not installed any CPU increaser or anything.
When I try to upgrade the ROM using DSUU (the way I installed
Atom EXEC) it tells me that the Device ID or Country is wrong.
I have THOROUGHLY read the Wiki and the forum and tried
a Bootloader mode but when I put the eboot in my MiniSD and
go into bootloader it instantly says download complete and
when I try to upgrade it it does not work telling me to do it on
OS first.
I am not even sure if this community is alive or dead
I am just very confused since I am still a student and
I've spend all my pocket money buying this phone...
If someone IS out there, please give me a hand!
Click to expand...
Click to collapse
follow this simple steps:
1. download original ROM from o2/MWG website
2. flash the unit with the original ROM.
your unit should be restored.
Execute any Atom rom, goto Win/Temp<-PC, copy EBOOT.nb0 and save it somewhere.
Execute the Atom Exec rom you currently have installed and replace EBOOT.nb0.
Once finished you will then be able to flash back to Atom rom via bootloader.