@all
anyone have a solution on how to downgrade rom..
i have a ATOM and upgraded to ATOM EXEC rom..
theres some guide in here but its inside of other thread and its not working..
please help us..i know im not the only one have a problem like this..
thanks in advance..
-=[serialzs]=-
If you have Atom Exec ROM, then the bootloader keys are Camera+Reset. If you can enter bootloader, you can now upgrade to the usual XDA Atom ROM.
Cheers,
Jiggs
jiggs said:
If you have Atom Exec ROM, then the bootloader keys are Camera+Reset. If you can enter bootloader, you can now upgrade to the usual XDA Atom ROM.
Cheers,
Jiggs
Click to expand...
Click to collapse
where i can put the bootloader? can you help me? please..
-=[serialzs]=-
serialzs said:
where i can put the bootloader? can you help me? please..
-=[serialzs]=-
Click to expand...
Click to collapse
press camera+reset button. you should see bootloader screen. From here, upgrade using the procedure I discussed in the aku3.3 thread.
cheers,
Jiggs
thanks for the help but i figure it out on my own now..i done it with something i dont think earlier because im too excited..hehe..
now i have a atom rom back again..
i will guide people have same problem..hope i can help..
-=[serialzs]=-
o2 atom upgrade problem
hi
i need ur help
i have o2 atom i upgrade to exec now i can not go back
it give me error in connection
please help
all_brother2002 said:
hi
i need ur help
i have o2 atom i upgrade to exec now i can not go back
it give me error in connection
please help
Click to expand...
Click to collapse
what version of atom exec you use?
-=[serialzs]=-
Well, I managed to downgrade my ROM back to the original Atom (my sig isn't updated - had problems with the extROM wiping itself) - but I was kinda lucky.
Y'see, the AE hack rom I use has an updated bootloader that won't let you do a USB firmware update unless you're activesync'd.
The only way to solve an ExtROM wipe was to reflash the device, so I did. Using the hack ROM DSUU - at this point, the original ROM won't recognize the device - I found that it usually takes a few tries for the extROM update to go through (extROM format fail) - when it fails, your phone will be stuck in bootloader (Connect a USB cable). Repeated attempts to flash the phone solves the problem.
So when my extROM inevitably disappeared again, and I hit the extROM format fail again, I decided I had enough and tried using the original Atom0426-0822 ROM.
It went through this time.
Seems that the only way to bypass the bootloader lock is to semi-brick your device. >_>
Just a question to all of you who are more experienced than me
I want to change my atom exec wwe to cht, can anyone tell me how to bypass the device country id error. do i use an spl? and are these spl programs device specific? or do i use the bootloader mode? Can someone explain that to me?
Thanks all in advance.
Bootloader mode works as long as you aren't using the Atom Exec hacked ROM (bootloader will tell you to use Async if you try). To upgrade, go into the bootloader, connect via USB, and run the DSUU from the computer.
You know you did it correctly when your unit's current firmware information is read as "0" by the DSUU/
Ultimate Chicken said:
Bootloader mode works as long as you aren't using the Atom Exec hacked ROM (bootloader will tell you to use Async if you try). To upgrade, go into the bootloader, connect via USB, and run the DSUU from the computer.
You know you did it correctly when your unit's current firmware information is read as "0" by the DSUU/
Click to expand...
Click to collapse
Strange, i already did that, and got the "0" from DSUU, but when i start upgrading, the bootloader spits out a message saying that i should connect with OS mode.
Anyway, I've edited the diskimage_Ver.nb0 file to do it.
Hi,
I have the same problem :
- bootloader : ok
- firmware 0 : ok
but connection error !
Do you have an idea ?
Thanks a lot.
bedav said:
Hi,
I have the same problem :
- bootloader : ok
- firmware 0 : ok
but connection error !
Do you have an idea ?
Thanks a lot.
Click to expand...
Click to collapse
Hi guy the main key on the file call EBOOT everytime when you want dowgrade your OS to normal ATOM just put this file to you SD card then use the bootloader mode you can see "imge downloading" just wait for a second it will reboot again . then you can use the DSU mode to flash your device
thats work !
Thank you very much !
HELP on my atom exec
w/o reading, i downgraded my atom exec to atom...
hw can i bring back my atom exec default WM5 ROM?...
am planning to upgrde to WM6 aftr...
Related
If you need PM
I modified the Atom exec's ExendedROM.img So it can be use in our Normal Atom!!!
Please NOTE:
unrar 5 rar package to C:\windows\TEMP
run device Software Update Utility.exe install!!!
Enjoy!!!
This pic is snap by CHT version
ENU version is same Ext0033 8)
Kobefei,
Have you tested it? Does it solve the Screen flieckering problem or we still need to keep the Batery charged?
Read in the forum that the BOOTLOADER funtionality wasnt avaible in this EXEC ROM, turning a little bit more dificult to upload the original Atom ROM. Would u know if this is still happening in this "upgraded" version?
Many Thanks,
Ph4nt0m
Ph4nt0m said:
Kobefei,
Have you tested it? Does it solve the Screen flieckering problem or we still need to keep the Batery charged?
Read in the forum that the BOOTLOADER funtionality wasnt avaible in this EXEC ROM, turning a little bit more dificult to upload the original Atom ROM. Would u know if this is still happening in this "upgraded" version?
Many Thanks,
Ph4nt0m
Click to expand...
Click to collapse
My sentiments exactly. Will this ENU version solve or i should say NOT have the flickering problem and the bootloader problem when reverting back to the original atom rom. I hope soooooo!!! Thanks for the hard work!!!
Has anyone tried this modified Rom atom exec 20060721 on ATOM.
I'm using ROM ATOM EXEC 20060614. This Rom is very good!!!
Cools !!! :lol:
lol
lol
lol
They are captured from a forum and I summarized them as followings.
Possible outcomes after flashing atom with exec rom 20060721.
1) Flickering screen if you REMOVE the battery (so stay away from exec roms if you plan to remove battery once a while, or you occasionally or accidentally deplete the battery). A possible reason is real atom exec use a different screen type (or hardware revision), as it show hardware revision "B" in system information of a real atom exec (later model)
2) New July exec rom does not allow you to return to any previous rom versions, neither via usb ActiveSync update nor bootloader mode, in fact, the bootloader mode in this version does not allow you flash any rom versions, if you try to flash rom in bootloader mode, it will stop and display "pls update in OS mode and synchronised"
3) Can't make a call without using bluetooth or headset, other people can't hear me when using phone mic. Some even added that other cannot hear voice from atom via headset.
A way to do it if you still want to proceed the update .
1) Run atom 0426 rom update program, after the DSUU program extracted the files, don't click "next", go to windows/temp folder, copy those files extracted, except "diskimage_Ver.nb0" and "ExtendedRom.img", then save them somewhere else.
2) Run july exec rom update program, after the DSUU program extract the files, don't click "next," go to windows/temp folder, overwrite with the files you just saved, this will leave only the diskimage_Ver.nb0 & ExtendedRom.img files as of the july exec rom, others become atom rom files, including an older bootloader which allows you to flash back other roms.
3) Flash.
thank you
Kyo said:
They are captured from a forum and I summarized them as followings.
Click to expand...
Click to collapse
Thank You! Seems that we should wait for a oficial Atom Update....
Thanks a lot buddy
I just want to know is how to backup the original rom,
using romupdate???
OK
Really cool
I installed the Atom Exec modified update on my Atom. And i tried to install the Old Rom Upgrade of Atom, am getting Country Id or Device Id error. Can anyone help me to install my old Atom ROM upgrade.
Try a hard reset. That should solve it.
Is it impossible to restore 426 after "full install" 0712? My screen flickering much and make me dizzy. Hope someone can help... thx
hard reset can't help. restore 0426 rom impossible.
If you want to revert to the 0426 rom, from the 0721 rom. Copy the eboot file from the 0426 installation to you miniSD card and go to bootloader, when its done you can install the 0426 rom again.
regards
yass
Just wondering if anyone out there would be kind enough to upload one of the new Atom Exec roms, edited to re-include the bootloader option (for installation on an 'old' Atom).
The 20060915 rom (not convinced the 20060721 is really the latest being it came out a while back ... and of course there's the name) with R060822N_MN2ARC_RS00013 radio update would be ideal - but as I'm looking to do a housekeeping reflash, any update from the old edited 0721 mod_n-fix rom will be greatly appreciated.
I have upload Roms but i d'ont know if you want those one!
bedav - thanks for the uploads, preferably am looking for a modified 0915 rom ... anyone out there got one ?
V.V.V.Urgent help please
I am stuck with the O2 Atom Exec Rom Version: 20060915 on the Atom and am unable to remove or re-rom any other version. I tired the bootloader mode: Camera+reset but it will not overwrite it and give a USB error. Can anyone tell me how to get rid of it.
****THANKS I HAVE BEEN ABLE TO SOLVE THE PROBLEM****
I got rid of the Atom and bought an Imate JasJam. Much Better Pocket PC Phone on comparision. Slower and a bit more complex but better in features and works well. It is also well supported in Mumbai, India.
THANK YOU ALL.
hsanghavi said:
I am stuck with the O2 Atom Exec Rom Version: 20060915 on the Atom and am unable to remove or re-rom any other version. I tired the bootloader mode: Camera+reset but it will not overwrite it and give a USB error. Can anyone tell me how to get rid of it.
Click to expand...
Click to collapse
I suggest you search through the forum, the solution has been discussed in detail, dont use the SD card to flash back unless you're 100% sure you know what you're doing. What you need to do is dl the edited 60721 rom and flash then you will be able to downgrade rom.
I can't find any of the edited roms on the ftp. Where to get?
try to reupgraded from boot loader!!
HELP
My Atom Exec can't boot, just bootloader only. can't reflash from Device Software Update Utility.exe,
PC report = ERROR: CONNECTION ERROR
Atom report = please use dsuu in os mode and sync with PC first! usb transfer fail
I'm tried rename diskimage_Ver.nb0 to diskimg.nb0, and copy EBOOT.nb0 to SD to SDDownload success, but same can't boot
help me
THANKS!!
silverkuo said:
My Atom Exec can't boot, just bootloader only. can't reflash from Device Software Update Utility.exe,
PC report = ERROR: CONNECTION ERROR
Atom report = please use dsuu in os mode and sync with PC first! usb transfer fail
I'm tried rename diskimage_Ver.nb0 to diskimg.nb0, and copy EBOOT.nb0 to SD to SDDownload success, but same can't boot
help me
THANKS!!
Click to expand...
Click to collapse
User activesync to update the ROM.
I had a wrong,put Atom-exec bootloader file "EBOOT.nb0" into my Atom SD card,and press 'Camera+SR' into DSUU mode updated Atom bootloader.
After Atom reset,I found my Atom nerver enter DSUU mode,if I press 'Camera+SR' , Atom will reset,BUT CAN'T ENTER DSUU MODE.
If Atom connect with Async4.2 to Update, when I run "Device Software Update Utility.exe",it can display Atom ROM version and show Update button,then click UPDATE,Atom will reset like softreset but can't display Update Interface.
It had kill bootloader, Wu,WU,WU.
How I reflash OLD BOOTLOADER? Let Atom can Enter DSUU MODE?
HELP!HELP!HELP!HELP!HELP!
No Anybody can help me!
No Anybody can help me!
szzls said:
No Anybody can help me!
Click to expand...
Click to collapse
sorry to inform your atom is stuck with that rom as you have no bootloader.
homer285 said:
sorry to inform your atom is stuck with that rom as you have no bootloader.
Click to expand...
Click to collapse
Have any software can rebuild the BOOTLOADER?
no. but from other hand, now you have a good experience for the future!
hi
i updated my atom rom version to 3.3.3 three days ago.It installed completed i used this rom 3-4 hours then i was freeze and i try to reset it. it didnt respond so i decided to hard reset to my atom.I tried to hard reset now it says "device clean boot....." it stuck this screen then i try to reset the device then it stuck o2 screen it didnt pass to align screen. i cant use my atom for three days
Please help me......
remove the battery for a while.. then try hard reset / reflash
i try this method but it is same it doesnt work
did u try the instructions posted in aku 3.3.3.??..
"
For those of you who have downloaded and flashed using SD Card method who ended up in a brick! ITEX recovers his Atom by following procedure:
1. remove SD Card
2. remove battery
3. hold camera button and reset (stylus) button
4. replace battery while still holding the buttons
This will bring you back to bootloader mode. Just flash the above DSUU.
"
Does it have a chance to use wm6?
joolawan said:
Does it have a chance to use wm6?
Click to expand...
Click to collapse
it can barely use WM5 and anyway these chinese splash their advertising for WM6 all over the place in hope ppl will buy their rom, until I see it running in my device or get confirmation from someone reliable (such as Jiggs) I dont believe a word of it and besides the 3.3.3 rom is very fast and ten times better than any actual official release
yes i tried to that method too. it is same it still stuck on o2 screen. it doesnt pass to align screen..please help me
my problem didnt solve pls help me i cant use my atom..........
plsssssssss help meeee...........
plsssssssss help meeee...........
R U able to go to bootloader mode ?...
ironeagle said:
R U able to go to bootloader mode ?...
Click to expand...
Click to collapse
try to be on the bootloader and reflashed the ROM. try to search same cases in the forum. I think they solved the problem alike.
yes same to problem. i dont re enter bootloader again :S
did DSUU Recognize your ATOM ?..
Connect your ATOM to PC (using USB)
Run DSUU
Try to flash it..
i can enter bootloader mode and i can update rom but after this proccess it says "device clean boot......" and it freeze . it doesnt pass to align screen
plssss help meeeeeeee.
Which ROM you flashed?..
i flashed orginal atom rom i downloaded from seeo2.com
pls helpppp meeeee my atom is dead
are u using o2 atom exec or just atom?
cuyz i've got o2 atom exec..maybe i could flash it with o2 atom (yeah i cant flash anything with dsuu)
mine is o2 atom
did u amend any thing from the original ROM from seeo2? I mean you flash your atom with the original ROM...0426? without replacing the extended ROM...etc?
Please check it out for the latest news at here.
http://forum.xda-developers.com/showthread.php?t=362338
I make the upgrade from WM5 to WM6 by the following post.
ATOM EXEC WM6 AKU0.7a.0 WWE 20071117A1WWE with STK
ATOM EXEC WM6 0.7b.0 WWE 20071216A3WWE
But I reaily can not accept the Bluetooth headset can not use for phone.
I want to downgrade to my default OS, WM5.
I had downloaded the Offical WM5 roms in my computer.
But I tried to downgrade by DSUU directly after the Atom Exec sync with PC.
The error message prompted with "Error Country ID or Device id Error"
I also tried in other mode, (Camara + Reset)
It can detect the CE IMAGE ROM, but unable to detect the Device Rom version.
So the DSUU will show the error "Error: Connection Error."
How can I downgrade the device the Atom Exec to WM5 ?
have you tried MN1 EBOOT?
http://forum.xda-developers.com/showthread.php?p=1684559&highlight=EBOOT.NB0#post1684559
My friend admin88hk be very careful while playing with the bootloader using sdcard or u will have a bricked device like mine . Read the complete forums on upgrade of atom exec then proceed with caution and cross ur fingers during the procedure.
hmmm.... try this first before you flash with SD Card
http://forum.xda-developers.com/showthread.php?t=335271
cheers,
TJ
Is it follow by this step, the device can be fully backwaard to WM5, if all of the step are success.
After that, the O2 connect and O2 Software can be used or not ?
I am looking for a success case.
Is there anyone has been done the steps which are posted about MN1 EBOOT??
Can reply me or give me confidence?? Thanks.
am looking for a success case.
Is there anyone has been done the steps which are posted about MN1 EBOOT??
Click to expand...
Click to collapse
Well it certainly has'nt been thought up on a whim, if thats what you're thinking.
Search and find your confidence mate, heck the link has been given to you!
This topic has been discussed in detail in all main Atom threads, try the link given by tjlabias(<-- btw hope you're well mate! ) after if no success then EBOOT method
I have follow the instructurtion for go back to WM5.
But I get a problem in the step 3.
I have download the EBOOT.nb0 and copy to MiniSD card.
After I insert into Atom EXEC, Press camera+reset.
The Screen will post the transfer in completed after 3 - 5 seconds the screen was load.
But the Atom EXEC was not action come out after the following 3 minutes.
So I press camera+reset again.
The screen still at MN2......
How can I change the bootloader to MN1........
any other solution to do it ?
I am reaily can not stand for the phone can not use the Bluetooth headset.
I also has found a some threads also related, but all of them is not work.
http://forum.xda-developers.com/showthread.php?t=331818
This case was very seems with me.
* I am uploading the image to webhost, I will update the post ASAP.
edit: I searched further and found that it could be done. Sorry for the unnecessary post!
-----
on a side note, is it possible to use the ROMs shown here for WM6 on my o2 which currently has WM5? Or do I first have to get an official upgrade to WM6 and then install the new ROMs here?