I know this has been posted before but I cant find it and I dont remember if there was a solution.
I'm using toms early v2 rom and RUU Nike Radio 1.64.08.21K.. After ending a call the phone freezes. Can anyone help?
Related
I have a Cingular 8525 I use the updater and everything seem to work fine. Now my phone will lock up sometime when I make a call randomly I have to reset it for it to come back again. Can anyone please help? I used the offical updater downloaded from XDA website to make it with the AT&T logo and everything.
The official rom is a piece of ****. There is a reason why no one who knows better uses it. Read the wiki/threads and learn about your options.
Hello everyone!
I recently upgraded my Cingular 8125 (G4 version) to WM6 Farias edition. I've also installed the radio rom version 02.61.11 but noticed that at times call do not come in and when voicemails are left i do not get a notification. Dont know if its due to the radio version i'm running so i decided to ask the rest of Cingular 8125 users to see if they have a radio rom that may be more stable.
I also noticed that GRPS disconnects when a call comes in and it re-connects when the call its released. I've heard of certain radio roms that actually stay connected while the phone its been used... anyone knows which one will that be?
Thanks in advance!
Will V.
WillJV said:
Hello everyone!
I recently upgraded my Cingular 8125 (G4 version) to WM6 Farias edition. I've also installed the radio rom version 02.61.11 but noticed that at times call do not come in and when voicemails are left i do not get a notification. Dont know if its due to the radio version i'm running so i decided to ask the rest of Cingular 8125 users to see if they have a radio rom that may be more stable.
I also noticed that GRPS disconnects when a call comes in and it re-connects when the call its released. I've heard of certain radio roms that actually stay connected while the phone its been used... anyone knows which one will that be?
Thanks in advance!
Will V.
Click to expand...
Click to collapse
The T-Mobile 2.19 radio is the one that most use to alleviate missed calls/voicemails. The newer ones have benefits to signal aquisition and signal strength over this and stock radios, but what good does that do you if the calls and voicemails dont come through
There are some on Cingular in the US that have radios above 2.19 working with no issues but they seem to be few and far between.
I have also not had any issues at all with the 2.61 radio with Faria's rom in my signature. How well it works with other roms I don't know as I haven't flashed my wizard since I flashed that combination on it. My wife uses it now and has had no call issues.
Thanks Zzan!
I downloaded the tmobile 02.19.11 radio and tried to flash my phone with it but got the following error message:
ERROR [300]: INVALID UPDATE TOOL
This update utility cannot be used for yoru PDA phone. Please get newer update utility.
I've gotten several replies from other Cingular 8125 users who like you have told me it'll fix my sms/voicemail problem.
I just tried installing Cingular_2.25.11_Radinly.zip and i got the same error message:
ERROR [300]: INVALID UPDATE TOOL
This update utility cannot be used for yoru PDA phone. Please get newer update utility.
I'm loving WM6 but the fact that some calls dont come in and I have to continously keep checking my voicemails to see if new vm came in pretty much sucks.... I'm considering going back to the stock rom since i cant get neither radio version to work on my phone...
WillJV said:
I just tried installing Cingular_2.25.11_Radinly.zip and i got the same error message:
ERROR [300]: INVALID UPDATE TOOL
This update utility cannot be used for yoru PDA phone. Please get newer update utility.
I'm loving WM6 but the fact that some calls dont come in and I have to continously keep checking my voicemails to see if new vm came in pretty much sucks.... I'm considering going back to the stock rom since i cant get neither radio version to work on my phone...
Click to expand...
Click to collapse
Have you tried running it from more than one computer? I have seen where this works for some people. Also try a soft reset of the phone and a reboot of the pc before attempting. If that doesn't work you can try booting straight to the bootloader then kicking off the install once you see USB in the corner. In any case you should be fine on WM6 if you can get the 2.19 radio to flash.
I just tried another PC here at work. I installed MS Activesinc 4.5 and tried flashing it with 2.19.11 but same error message.
I'll continue to try and post any progress (if any) LOL
I"m going to try reseting the phone and restarting the pc now.
Thanks for helping me out giving other suggestions.
Will V.
Done deal!!!
Finally got it to Flash using the Tmobile UK 02.19.11 version.
I replaced the ROMUpdateUtility_Wizard_NoID.exe with the one included in the WM6 Faria Step 4 folder.
Ran the update utility and it flashed the phone without a problem.
Time to test it but i've gotten several replies stating that it should be a lot more stable than the one i had.
Thanks again and hope the info above could help other users having the same problem.
brother.... So i have the same issue with my 8125 ..G4 with wm6...missed call and no notification for voicemail...
tried radio 2.69 farias ..still no use...
Have u been able to resolve it? please help me...Let me install the Tmobile UK 2.19 radio now....
please advice.....
Hallo everyone, does someone has an solution for my problem.
Everytime I make and then end a phone call the s200 freezes and I have to soft-reset it.
It looks like a problem in the phone software.
When I get an incoming call and then end it then I have to wait for a minute and then finally the phone program closes.
When I try to close it myself it freezes just like when I made the call.
I haven't found anything in the forum section.
Device info:
ROM 2.26.10.2
radio version 02.19.21
protocol version 4.1.13.09
ExtRom version: 2.15.13.121
Hope to get get some help, greetings Froggie
I get the same problem. No solution.
I installed MS Console recently, and also made some tweaks to the phone settings via 'advanced configuration' tool. could that be it?
I have posted this problem in other threads as well but I am in desperate need of help here.
I have Imate JasJam Herm100, I am new to ROM upgrading thing. I upgraded to ROM version 3.54.255.3 2 days ago. Everything is working fine but the bluetooth.
I am able to send files on bluetooth even my bluetooth handsfree is working fine, but I am unable to receive any file, I don't know why. Whenever I try to send a file from another phone to my JasJam, this message appears "Sending Failed"
I have even enabled Infrared, also tried receiving after pairing devices but in vane.
Someone please please tell me what to do I really need to figure it out.
sheharyar said:
I have posted this problem in other threads as well but I am in desperate need of help here.
I have Imate JasJam Herm100, I am new to ROM upgrading thing. I upgraded to ROM version 3.54.255.3 2 days ago. Everything is working fine but the bluetooth.
I am able to send files on bluetooth even my bluetooth handsfree is working fine, but I am unable to receive any file, I don't know why. Whenever I try to send a file from another phone to my JasJam, this message appears "Sending Failed"
I have even enabled Infrared, also tried receiving after pairing devices but in vane.
Someone please please tell me what to do I really need to figure it out.
Click to expand...
Click to collapse
try check the box in beam!!! and check the box in bluetooth make the device visible
man I have done that already still I face the same error.
No cross-posting.
I'm using the AT&T Pure Stock ROM on my Germany bought Topaz.
I'm pretty happy with that ROM but since I had issues with the phone responding very slowly or completely freezing especially when I got a text message or an incoming voice call right after powering the phone on I installed the "HTC PURE Phantom SMS Hotfix" that is available on the US HTC website.
I think it actually fixed the problem but since I installed it I started to have other issues with the phone e.g. the WiFi suddenly turning itself off while listening to a radio stream or the phone hanging at the "Windows Mobile" screen when powering on.
I remember that I had similar issues when I was using the Pure ROM with the (incompatible) HardSPL 2.51 so I was wondering if that hotfix would have normally upgraded the SPL but couldn't do so on my phone cause I have HardSPL on it. So maybe the HardSPL 1.83 that I have on my phone now is incompatible withe the hotfix?
So maybe someone who has an original AT&T Pure with stock ROM & that hotfix installed could check which SPL version you have on your phone?
I would really appreciate that a lot!
Thanks
karlmueller
I doubt it upgrades the SPL but please give me a link to this update and I can check for you.