I have posted this problem in other threads as well but I am in desperate need of help here.
I have Imate JasJam Herm100, I am new to ROM upgrading thing. I upgraded to ROM version 3.54.255.3 2 days ago. Everything is working fine but the bluetooth.
I am able to send files on bluetooth even my bluetooth handsfree is working fine, but I am unable to receive any file, I don't know why. Whenever I try to send a file from another phone to my JasJam, this message appears "Sending Failed"
I have even enabled Infrared, also tried receiving after pairing devices but in vane.
Someone please please tell me what to do I really need to figure it out.
sheharyar said:
I have posted this problem in other threads as well but I am in desperate need of help here.
I have Imate JasJam Herm100, I am new to ROM upgrading thing. I upgraded to ROM version 3.54.255.3 2 days ago. Everything is working fine but the bluetooth.
I am able to send files on bluetooth even my bluetooth handsfree is working fine, but I am unable to receive any file, I don't know why. Whenever I try to send a file from another phone to my JasJam, this message appears "Sending Failed"
I have even enabled Infrared, also tried receiving after pairing devices but in vane.
Someone please please tell me what to do I really need to figure it out.
Click to expand...
Click to collapse
try check the box in beam!!! and check the box in bluetooth make the device visible
man I have done that already still I face the same error.
No cross-posting.
Related
Hi everybody
I have a big problem:
when i lost the gsm signal the phone is power off and never recive incoming calls ... until i'll power on again.
Is there some settings in order to search the gsm signal always...?
...cause i can't control the xda every 5 minutes if have signal or not...
I have 4.21 radio and 4.00.11 rom
Thanks all
Denis
have you tried a hard reset? or even re-writtin the bios?
that worked for me
Hi Guys,
I need your help .
I've downloaded the 4.00.16 ROM by mistake, it really didn't tell the ROM number, so now I want to revert to a earlier one and I can't.
I've got the following message: "ERROR: GetDeviceData - An established connection was aborted by the software in your host machine.
error getting devicedata" and then "ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR. Cannot execute the remote communication program. Please make sure that the USB/Serial cable is properly connected."
PLEASE HELP ME, I'M REALLY STUCK NOW AND DON'T KNOW WHAT TO DO...
Sorry ... when can i get the radio 6.24.00 ???
can work for Italy ?
What do you mean with "re-writtin the bios" ... ? the SD card boot ?
Thanks
Hi all,
recently upgraded my i-mate with:
ROM version: 1.72.00wwe
Radio version: 1.14.00
and when trying to send sms, getting the following message: "the phone is not ready. wait 15 sec and try again".
The same message gettig when trying to make phone settings.
Does anyone have ever experienceâ the same problem, please help!
THNX!
Yup
You should really wait that long before you do anything to the phone. If you wait too little you'll end up wating more time as the timer seems tto reset whenever this message is shown. If you wait 30 seconds then everything is fine.
If you got this message after waiting several minutes when there might be something wroong with your flash. Mayby you should try a never radio stack e.t.c.
It takes a little getting use to, unfortunately.
Powershot-g2
Problem solved
If somebody is interested, I have solved my problem with reinstalling the upgrade. Empty PDA doing well until restoring backup. After back up, the same problem occurred. Then I did the following: hard reset and one by one installation of all programs that I had before. After each installation checking for any problem with sms. No problems so far.
Are yoy restoring a backup from a orevious version of WM2003? If so, this may be the cause of the problem. THe bacup process is known to restore a lot of system files along with your data and that can sometimes cause problems.
Steven
I had the same when I upgraded to 2.02 rom version, but left my radio version to 1.08.
I upgraded to 1.18 radio but I was left with a bootscreen only.
So I again burned the thing with 2.02 and 1.18 and everything was fine (except sms notifications)
I guess its an incompatiblity between your rom and radio somewhere...
This happened to me once... but what's really annoying is when you received a message, sometimes you'll see the pop-up message icon at the upper part (near the time and speaker). But on the today screen message, it doesn't appear to have a new message. Does this happen to you guys? This is really annoying...
i have a problem after the update to 1.72WWE
the problem with the SMS reports !
the device don't recieve them !
why?
Dear friends
I was tring to upgrade my iMate Pocket PC also know as Himalaya with windows2003 SE , while upgrading I faced problems, the upgarde failed and now I am just getting no display and OS too. The only message displayed is
Serial
v1.03
nothing is working please help
bye with regrads,
your unit is still okay; even better that the usb version is showing on the screen. it's simply stuck on bootloader mode. what kind of problems did you encounter resulting in the failed upgrade?
one suggestion i can give before you downgrade is to try and proceed with the upgrade to se. put your unit back on the cradle but don't expect activesync to "recognize" the device. just put it back on the cradle and rerun the upgrade to se.
same thing happened when i upgraded but to wm2005. the screen showed error and the only thing on the screen was the usb version. i simply cradled back the unit and ran the upgrade. worked.
cheers
Hi
Thanks a lot, i tired those steps before and even now I did but its not upgarding I am gettig following error as show i the attachment. Please let me know what to do
thanks a lot
yas
oh, it appears that you have the "wrong country" id issue. i'm not entirely sure as to how to avoid this but i believe it has something to do with the correct rom version (guys, correct me if i'm wrong). where did you get the rom you used for upgrading to se? downgrading might be the only trick if there is no rom for saudi-based users...but if any chaps presently living there and were successful in upgrading their units perhaps you could share the rom version/s you used?
cheers
yasirirfan said:
Hi
Thanks a lot, i tired those steps before and even now I did but its not upgarding I am gettig following error as show i the attachment. Please let me know what to do
thanks a lot
yas
Click to expand...
Click to collapse
To overcome the Country ID Error, first you need to install this tool...
ftp://xda:[email protected]/Tools/ER2003Edit_1_4_26.zip
Open the ROM file you want to upgrade, then change the appropriate 'Operator ID' code, after this click 'Save ROM image'.
Upgrade ur device. You will no longer face the error message.
Hello everyone!
I recently upgraded my Cingular 8125 (G4 version) to WM6 Farias edition. I've also installed the radio rom version 02.61.11 but noticed that at times call do not come in and when voicemails are left i do not get a notification. Dont know if its due to the radio version i'm running so i decided to ask the rest of Cingular 8125 users to see if they have a radio rom that may be more stable.
I also noticed that GRPS disconnects when a call comes in and it re-connects when the call its released. I've heard of certain radio roms that actually stay connected while the phone its been used... anyone knows which one will that be?
Thanks in advance!
Will V.
WillJV said:
Hello everyone!
I recently upgraded my Cingular 8125 (G4 version) to WM6 Farias edition. I've also installed the radio rom version 02.61.11 but noticed that at times call do not come in and when voicemails are left i do not get a notification. Dont know if its due to the radio version i'm running so i decided to ask the rest of Cingular 8125 users to see if they have a radio rom that may be more stable.
I also noticed that GRPS disconnects when a call comes in and it re-connects when the call its released. I've heard of certain radio roms that actually stay connected while the phone its been used... anyone knows which one will that be?
Thanks in advance!
Will V.
Click to expand...
Click to collapse
The T-Mobile 2.19 radio is the one that most use to alleviate missed calls/voicemails. The newer ones have benefits to signal aquisition and signal strength over this and stock radios, but what good does that do you if the calls and voicemails dont come through
There are some on Cingular in the US that have radios above 2.19 working with no issues but they seem to be few and far between.
I have also not had any issues at all with the 2.61 radio with Faria's rom in my signature. How well it works with other roms I don't know as I haven't flashed my wizard since I flashed that combination on it. My wife uses it now and has had no call issues.
Thanks Zzan!
I downloaded the tmobile 02.19.11 radio and tried to flash my phone with it but got the following error message:
ERROR [300]: INVALID UPDATE TOOL
This update utility cannot be used for yoru PDA phone. Please get newer update utility.
I've gotten several replies from other Cingular 8125 users who like you have told me it'll fix my sms/voicemail problem.
I just tried installing Cingular_2.25.11_Radinly.zip and i got the same error message:
ERROR [300]: INVALID UPDATE TOOL
This update utility cannot be used for yoru PDA phone. Please get newer update utility.
I'm loving WM6 but the fact that some calls dont come in and I have to continously keep checking my voicemails to see if new vm came in pretty much sucks.... I'm considering going back to the stock rom since i cant get neither radio version to work on my phone...
WillJV said:
I just tried installing Cingular_2.25.11_Radinly.zip and i got the same error message:
ERROR [300]: INVALID UPDATE TOOL
This update utility cannot be used for yoru PDA phone. Please get newer update utility.
I'm loving WM6 but the fact that some calls dont come in and I have to continously keep checking my voicemails to see if new vm came in pretty much sucks.... I'm considering going back to the stock rom since i cant get neither radio version to work on my phone...
Click to expand...
Click to collapse
Have you tried running it from more than one computer? I have seen where this works for some people. Also try a soft reset of the phone and a reboot of the pc before attempting. If that doesn't work you can try booting straight to the bootloader then kicking off the install once you see USB in the corner. In any case you should be fine on WM6 if you can get the 2.19 radio to flash.
I just tried another PC here at work. I installed MS Activesinc 4.5 and tried flashing it with 2.19.11 but same error message.
I'll continue to try and post any progress (if any) LOL
I"m going to try reseting the phone and restarting the pc now.
Thanks for helping me out giving other suggestions.
Will V.
Done deal!!!
Finally got it to Flash using the Tmobile UK 02.19.11 version.
I replaced the ROMUpdateUtility_Wizard_NoID.exe with the one included in the WM6 Faria Step 4 folder.
Ran the update utility and it flashed the phone without a problem.
Time to test it but i've gotten several replies stating that it should be a lot more stable than the one i had.
Thanks again and hope the info above could help other users having the same problem.
brother.... So i have the same issue with my 8125 ..G4 with wm6...missed call and no notification for voicemail...
tried radio 2.69 farias ..still no use...
Have u been able to resolve it? please help me...Let me install the Tmobile UK 2.19 radio now....
please advice.....
im getting a code 260 and the phone resets it self and active sync looses it connection any ideas
i think u're in the wrong forum..
jstuart83 said:
im getting a code 260 and the phone resets it self and active sync looses it connection any ideas
Click to expand...
Click to collapse
That my friend is a communication error... I had it frequently when trying to install the latest HardSPL under Vista... You can go HERE and see a list of error codes....
ERROR [248~260] : UPDATE ERROR
This error occurs when there is an “open port error” before upgrading the CE ROM image.
Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again.
jstuart83 said:
im getting a code 260 and the phone resets it self and active sync looses it connection any ideas
Click to expand...
Click to collapse
AT&T Tilt is a Kaiser....NOT a Hermes.
go to the kaiser forum and they will help you out.
Hermes Getting code 260
I am having the exact same issue. My problem is on a hermes (ATT 8525)
i have the "update error" problem as well. i have read almost all the threads and searched so much i almost found jimmy hoffa, but nothing
i have tried everything i could think of. i reseted the device and computer so many times i think it will "ware out" soon . i tried official roms, hard spl, unlockers... you name it i've tried it and still i cant get past any RUU. after the bootloader it should start, but i doesn't
i've even called the t-mobile tech support but the answer was "our ruu works fine for us, we don't know where the problem is...bad luck"
if some one has any (well don't take this literally) advice he is more than welcome. now i'm gonna chill out
thanx in advance from a frustrated vario II user
i've located the problem. it's an activesync error (code 43). searched for fixes, but unsuccessfully. if anyone has resolved the problem or has relevant info, please post it. thanx
after endles repeats i've somehow managed to get past the error. don't know how. i upgraded the rom smoothly, like i never had any problems