how to use mtty and boot command??
close activesync, start niki in bootloader, connect with usb, launch mtty, new connection, usb, write "boot" end then push enter
thanks a lot.
Related
I'm in bootloader mode, and I see USB on screen.
What is boot command "info 2"?
I see nothing that allows me to type this.
I have tried to do this on two computers.
Do I need to have the tytn connected via usb cable? ( I have tried both with and without).
Is there an easier way to find out what my CID is?
pufftissue said:
I'm in bootloader mode, and I see USB on screen.
What is boot command "info 2"?
I see nothing that allows me to type this.
I have tried to do this on two computers.
Do I need to have the tytn connected via usb cable? ( I have tried both with and without).
Is there an easier way to find out what my CID is?
Click to expand...
Click to collapse
I believe you have to start the program MTTY first on you pc. You will be in a commandbox then and there you can type your commands.
Read instructions here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
You need to disable usb in activesync and run mtty.
Thank you for being an angels (robust, manly angels).
I have now successfully unlocked my tytn and given it a super cid....now I need to choose which ROM to use.
Cingular, HTC, or Imate? Choices choices...
I did look for bootloader but for some reason I missed it in the search.
Thanks again
HI i'm sticking in the KITL, in the KITL i can see the USB in the white area.
i Try to connect mtty.exe but there is only the prompt
Cmd>
why? i need ....
USB>
i need to unbrick my TyTn
my IPL is 1.04
SPL 2.10.Olipro
i try to flash shaps rom but then come the [error 286] after 12%
now i dont know what i can do.
and yea i have install Hard Spl V7
PLS help, yea i have read the WIKI and yea i have search in the forum..
Did you select 'USB' in the Mtty Port drop down and not the 'COM's?
You press Enter key twice and USB> will appear.
I had the same issue, although I chose USb from the drop down menu and hit enter twice, the prompt still kept saying CMD>
Nevertheless, I went on to input the same commands (my Tytn was semi-bricked after a botched radio upgrade). After the password 0000000000000000 command , I got back an 'incorrect password' response, or something like that, but went on. I managed to then flash TNT 2.0 again and recovered from the no gsm problem by removing teh battery several times and resetting. Not sure if the CMD > prompt actually accepted the commands or not.
Hi
I'm trying to explore my new device the german XDA Comet aka XDA Atom Life.
To enter into the bootloader semms different to the Atom.
To enter the bootloader you must press the voice notice-key and the softreset-key together.
After that we have the options :
(1) Enter OS
(2) Enter GSM AT Mode
(3) Enter GSM AT+ Diag Mode
(4) Enter GSM Download Mode
(5) Burn MOT/BL via UART
If the USB cable isn't conected,
you can choose those options by pressing the left or right D-Pad key and select with the center button.
In HTC devices you can handle the bootloader via USB cable and MTTY.exe
That doesn't run on XDA Comet, but how can I conect the device via terminal ?
Is there anny documentation about the bootloader commands ?
An other option : if you press the left D-pad key and softreset, the bootloader comes in "SPI-Mode"
After opening the bootloader image with an hexeditor there are so many options, the bootloader has. There must be a way to use it.
scorpio16v said:
Hi
I'm trying to explore my new device the german XDA Comet aka XDA Atom Life.
To enter into the bootloader semms different to the Atom.
To enter the bootloader you must press the voice notice-key and the softreset-key together.
After that we have the options :
(1) Enter OS
(2) Enter GSM AT Mode
(3) Enter GSM AT+ Diag Mode
(4) Enter GSM Download Mode
(5) Burn MOT/BL via UART
In HTC devices you can handle the bootloader via USB cable and MTTY.exe
That doesn't run on XDA Comet, but how can I conect the device via terminal ?
Is there anny documentation about the bootloader commands ?
Click to expand...
Click to collapse
Hi Scorpio, finally you have your Comet? Unfortunately, I have been searching for the option to connect the Atom via terminal. It's difficult to do debugging...
If you would however, look at your bootloader in a hex editor, you would find interesting things.... menu options that are not readily seen by going into bootloader mode. As for MTTY, I never got it to connect. Same for Putty as well.
I've tried to get CID of my Mozart (as I've got mine from ebay and not sure what market it was destined for) and all I've got so far is:
1. I need to get mtty running (http://forum.xda-developers.com/showthread.php?t=623356)
2. I need to execute "task 32" and then "info 2" to get CID.
I went through first step and stuck on the second. once I execute "task 32" mtty on any key press outputs "<CE-1637352>". Also phone does not switch back to Serial if I disconnect USB cable. I'm able to reconnect with mtty only after restarting into bootloader mode again. I tried "info 2" without "task 32" but mtty responds with "Command error !!!". Am I doing smth wrong or is there other way to get CID from device?
Same problem
Hi Guys,
Please help, I am unable to enter fastboot using power + vol+ key but I could enter recovery mode using power + vol-
Please help, many thanks in adv.
connect to pc , go to cmd via platform tools and type adb reboot fastboot....its only alternative
v. kumar said:
connect to pc , go to cmd via platform tools and type adb reboot fastboot....its only alternative
Click to expand...
Click to collapse
Doesn't work
Uh, it's not even a bug
You must install adb on your pc and turn on USB Debugging on your phone, then connect phone to pc via USB.
On your pc open adb and choose transfer files on your phone, pop-up windows will appear, click allow
Now type in cmd: adb reboot bootloader
End
Do in this order:
1.Open adb
2.Connect via usb
3.Type adb reboot bootloader
Uh, it's not even a bug
You must install adb on your pc and turn on USB Debugging on your phone, then connect phone to pc via USB.
On your pc open adb and choose transfer files on your phone, pop-up windows will appear, click allow
Now type in cmd: adb reboot bootloader
End
Do in this order:
1.Open adb
2.Connect via usb
3.Type adb reboot bootloader
My phone don't turned on in system