When using UC, installing cabs runs great with no complaints. Everything installs as it should.
However I am having issues where the copy command does not move the files as I hope they would. Are there syntax errors? Am I doing something wrong?
The only thing I think that may be wrong is that I am asking it to overwrite a couple files which may cause a conflict (welcomehead.96.png and taskmgr.exe).
I am posting my sdconfig.txt as well as pasting below.
LOCK:Enabled
CAB: \Storage Card\Cabs\Serf Verizon.cab
CAB: \Storage Card\Cabs\Serf Arcsoft 5.0.31.19.cab
CAB: \Storage Card\Cabs\Serf Audiopara.cab
CAB: \Storage Card\Cabs\Serf Flash Bundle.cab
CAB: \Storage Card\Cabs\Serf GC Java.cab
CAB: \Storage Card\Cabs\Serf HHC 1.0.cab
CAB: \Storage Card\Cabs\Serf HTC Home.cab
CAB: \Storage Card\Cabs\Serf HTC GPS.cab
CAB: \Storage Card\Cabs\Serf Kaisertweak.cab
CAB: \Storage Card\Cabs\Serf Macrosoft Dialer.cab
CAB: \Storage Card\Cabs\Serf MortPlayer.cab
CAB: \Storage Card\Cabs\Serf Nilisco Flashlight.cab
CAB: \Storage Card\Cabs\Serf PhonTuner.cab
CAB: \Storage Card\Cabs\Serf QuickGPS.cab
CAB: \Storage Card\Cabs\Serf Schaps.cab
CAB: \Storage Card\Cabs\Serf TCPMP.cab
CAB: \Storage Card\Cabs\Serf TomTom.cab
CAB: \Storage Card\Cabs\Serf Total Commander.cab
CPY1:\Storage Card\Cabs\WisVol.exe
CPY2:\Windows\Start Menu\Programs
CPY1:\Storage Card\Cabs\WisSystem.exe
CPY2:\Windows\Start Menu\Programs
CPY1:\Storage Card\Cabs\TaskMgr.exe
CPY2:\Windows
CPY1:\Storage Card\Cabs\Vista.mpz
CPY2:\Program Files\Mortplayer
CPY1:\Storage Card\Cabs\welcomehead.96.png
CPY2:\Windows
LOCKisabled
RST: Reset
My next project is to figure out where my reg keys for my settings so I can begin using XML. Kewl.
Try this:
Code:
LOCK:Enabled
CAB: \Storage Card\Cabs\Serf Verizon.cab
CAB: \Storage Card\Cabs\Serf Arcsoft 5.0.31.19.cab
CAB: \Storage Card\Cabs\Serf Audiopara.cab
CAB: \Storage Card\Cabs\Serf Flash Bundle.cab
CAB: \Storage Card\Cabs\Serf GC Java.cab
CAB: \Storage Card\Cabs\Serf HHC 1.0.cab
CAB: \Storage Card\Cabs\Serf HTC Home.cab
CAB: \Storage Card\Cabs\Serf HTC GPS.cab
CAB: \Storage Card\Cabs\Serf Kaisertweak.cab
CAB: \Storage Card\Cabs\Serf Macrosoft Dialer.cab
CAB: \Storage Card\Cabs\Serf MortPlayer.cab
CAB: \Storage Card\Cabs\Serf Nilisco Flashlight.cab
CAB: \Storage Card\Cabs\Serf PhonTuner.cab
CAB: \Storage Card\Cabs\Serf QuickGPS.cab
CAB: \Storage Card\Cabs\Serf Schaps.cab
CAB: \Storage Card\Cabs\Serf TCPMP.cab
CAB: \Storage Card\Cabs\Serf TomTom.cab
CAB: \Storage Card\Cabs\Serf Total Commander.cab
CPY1:\Storage Card\Cabs\WisVol.exe
CPY2:\Windows\Start Menu\Programs\WisVol.exe
CPY1:\Storage Card\Cabs\WisSystem.exe
CPY2:\Windows\Start Menu\Programs\WisSystem.exe
CPY1:\Storage Card\Cabs\TaskMgr.exe
CPY2:\Windows\TaskMgr.exe
CPY1:\Storage Card\Cabs\Vista.mpz
CPY2:\Program Files\Mortplayer\Vista.mpz
CPY1:\Storage Card\Cabs\welcomehead.96.png
CPY2:\Windows\welcomehead.96.png
LOCK:Disabled
RST: Reset
Oh, I see. I didn't restate the filename for the destination.
Thanks GC.
Do you have a good link for XML syntax? The User Customizations thread has alot of cab and copy stuff but not many successful examples of reg keys and the like.
thanks!
Related
2. Modify the operator ID in the nbfs to the value you require
by entering the following commands at the command prompt
substituting <operator> with the required value:
xda2nbftool -sd PH10 -so <operator> -sl WWE NK.nba
xda2nbftool -sd PH10 -so <operator> -sl WWE Radio_.nba
MY QUESTION:
What is the <operator> value for my phone? how can I find it?
This is the latest Topaz OEM. It's Chinese 0404 but all current 0409 mui files will work with this.
http://download.ppchaven.com/GSM Devices/HTC Topaz/Users/DHarvey/Topaz 1.40 0404 OEM.rar
Here is an OEM Report:
Code:
AdobePDF 2_5_1_0_378273_00B
AdvancedNetwork 1_0_10_1
Album 3_0_19132927_0
App_Service 1_65_0_1
Arcsoft_MMS 5_0_43_111
Arphic_CHT_Font 1_1_20090325_00
AudioBooster 2_2_19122728_0
AudioManager_Eng 1_7_19122322_h
BluetoothSetting 2_11_0_1
BootLauncher 1_0_35330_2
BTBPP 1_7_1_R4
BTSAP 3_2_0_R6
Calculator 1_0_19132026_00
Camera 6_15_34231_1
CleanGPSData 1_1_0_0
ClearStorage 1_39_0_3
CMBandSwitching 0_9_2_2
CMBluetooth 1_1_0_2
CMPhone 0_9_3_2
CMPin 1_0_0_0
CommManager 2_8_7_2
ConcurrenceMgr 1_5_19113219_0000
ConnectionSetup 2_7_37654_1
ContactUtilityEngine 1_0_19132213_0000
CyberonDictionary 1_72_901211_R1
DataDisconnect 1_14_0_0
DeviceInfo 1_32_0_0
DiscretixDRM 1_0_20090315_00
DRMMiddleware 1_5_19122329_00
DShow 2_00_19132929_0
EnlargeStartMenu 1_2_37648_1
Field_T_e_s_t 2_19_0_0
FileUpload 1_1_0_0
FMRadio 1_7_19121620_00
FullScreenPlayer 1_6_19132732_00
GoogleMap 3_0_012_2
GSensorCalibrator 1_1_18212730_0
HTC_EmailSetupWizard 1_0_19132328_0
HTCAnimation 1_1_5_2
HTCApplication 1_11_0_0
HTCFDN 0_9_2_2
HTCFontLink 1_0_19132133_1
HTCMessage 1_81_281_0
HTCScroll 1_0_19113219_0
HTCSettings 1_3_8_2
HTCStartUp 1_7_0_1
HTCUtil 4_3_0_0
IME_CHT 2_0_344910_00
InvokeSIMMgr 1_11_0_3
JBlendJava_JTWI 0_0_20090220_2_1
LongPressEndKey 1_2_19123727_00
Manila_CHT 2_0_37894_6
MediaToolkit 1_0_19132331_00
MenuEnhancement 1_0_19141731_00
MessageEnhancement 1_0_19132329_00
mHubVO 1_71_090331_X0
MicrophoneAGC 0_91_0_3
MP3Trimmer 1_2_19121621_1
Mute 1_1_2_1
MyCPL 3_13_0_6
NewContactCard 1_0_19132626_00
NewMailAccount_exe 1_11_0_0
Notification_Enhancement 1_2_1913_3822
Opera_Browser 9_50_16277_0
OutlookEnhancement 1_1_1822_3121
PhoneCanvas 3_50_34296_0
PhoneSetting 6_31_0_2
PictureEnhancement 1_50_19121428_00
PKG 1_1_0_0
Power 2_22_0_0
PowerOffWarning 2_6_0_0
PushInternetEngine 1_0_19132326_0
QuickGPS 1_01_19131225_00
RandomAccess 4_1_18224021_0
Redial 1_2_0_0
ResourceProxy 1_0_19132627_00
RestoreGPS 1_0_0_0
RingtonePlugin 1_00_080624_4
RSSHub 2_1_1_1087_01
RunCC 1_0_9_0
SensorSDK 4_0_19132932_00
SharedModules 1_01_19131231_00
SignatureReplace 1_2_0_0
SIM_MGR 6_64_0_2
SIMLock_exe 4_23_0_0
SmartTouch 1_2_19132028_1
SMSInboxThreading 1_35_0_2
STK_Service 4_85_0_0
STK_UIPPC 4_67_0_0
StorageLow 1_0_0_3
StreamingMedia 3_1_19132724_00
StreamingSrcFilter 2_7_19132219_00
TaskManager 2_1_37657_1
Teeter 1_6_19132132_00
TouchFLO 3_0_19132627_TZ00
USBtoPC 1_23_0_2
USBToPCPopUp 2_2_19141727_0
USSD_Service 4_33_0_0
VideoTelephony 2_5_33904_0
VoiceRecorder 1_10_19121928_1
VolumeControl 2_1_19133825_0
WiFiSettings 1_2_1_0
Wi-FiWizard 1_0_0_2
WLANSettings 2_5_0_0
YouTube 2_5_19131232_02
zlibce_m 1_2_3_0
--------------------------------------------------------------------------------
Generated with OEM Version Checker by Vic, 2008
Cheers mate
looks like pretty much the same package numbers as the signed 1.39 one from earlier this week
Was hoping for a new phonecanvas that worked in landscape..
but d/ling to have a look anyway
thanks, let's try to learn something about that new letter scroll
EDIT:
I'm sorry but this is exactly the same files as the 1.39 WWE ROM
Nice sharing.....Thanks a lot!
so we still need the official 21042 0404 package before we can reproduce the rom. do anyone where can i find this ?
I am finding myself upgrading my Raphael rom about 3 times a week! I have currently got the time of installing apps, software and settings down to about an hour 30 mins! I have tried a tool called ucme2 to try and speed up this time however have not found it user friendly. Has anyone got any advice on tools that I can use to speed up a restore following a rom upgrade - what sort of times are you guys getting?
Thanks in advance
I HAVE TO SAY USE THE SEARCH ......there have been many post lately on these type of things but here you go..
tryin INSTALL EXPRESS i like it ,it makes a file on ur memory card that after u install INSTALL EXPRESS again it can locate it after ur flashing and reinstall ur apps i use it everyday then u have good ol SASHMI AUTO INSTALLER ...i used it a couple of times but i prefer INSTALL EXPRESS....HOPE THIS HELPS
Most people use User Customisation (UC) in theor ROMs so that you can put in all the cabs and xmls you want and they will be automatically executed. Check out a couple of ROM threads, some link to the UC thread
thanks guys that is great - does anyone use anything that restores all your settings? e.g. TF3d
I use SASHIMI in with some added mortscripts to copy back my settings files. Some are in registry, so you can export those using DotFred Taskmanager(or others) and place in the reg folder of SASHIMI. It will auto import these registry settings. For more info on Sashimi go to www.winmo-experts.com
You will find several ROMs support many kinds of autoinstallers. Mine support both SASHIMI and UC. Most if not ALL of the rest support at least UC. UC is most likely the fastest way to do it, since it is run during customization phase. I have not ventured into it yet since I have a lot of registry settings that I havent gotten around to converting to XML. But you can use UC and convert reg entries to XML with reg2xml.exe(do a quick search).
Maybe once you get all your info, we can close this thread as it is not in the right forum. Should be in Q&A, but I won't flame too much
jmckeejr: you can use CeRegEditor to convert your .reg into .cab
JPHCCFC said:
thanks guys that is great - does anyone use anything that restores all your settings? e.g. TF3d
Click to expand...
Click to collapse
if your serious about cutting down your load time then you need to use a uc complient rom or learn how to invoke the sdautorun your self, i beleive the ucme2 that you metioned in your first post does this. most of your reg settings you can put into a cab if you don't have an app to makes cabs look for OCP's Win CE cab manager its the best. i am posting my sdconfig.txt files so you can see an example... hope this helps
Code:
LOCK:Enabled
CAB: \Storage Card\pda keep\pda apps\rtconfig.cab
CAB: \Storage Card\pda keep\pda apps\HTC_Album_V_2.5.1820.4127.cab
CAB: \Storage Card\pda keep\pda apps\CommManager.cab
CAB: \Storage Card\pda keep\pda apps\GScroll v2.cab
CAB: \Storage Card\pda keep\pda apps\calplus.cab
CAB: \Storage Card\pda keep\pda apps\calculator.cab
CAB: \Storage Card\pda keep\pda apps\RSSHub_2_1_1_1065.cab
CAB: \Storage Card\pda keep\pda apps\xm.cab
CAB: \Storage Card\pda keep\pda apps\MP3_Trimmer.cab
CAB: \Storage Card\pda keep\pda apps\CallFirewall_V_1_4.cab
CAB: \Storage Card\pda keep\pda apps\AddinTimer3.5.2.CAB
CAB: \Storage Card\pda keep\pda apps\pocket rar.cab
CAB: \Storage Card\pda keep\pda apps\qwertyMemory and dciBattery.cab
CAB: \Storage Card\pda keep\pda apps\GoogleMapsv3.0.1.6.cab
CAB: \Storage Card\pda keep\pda apps\NoniGPSPlotV2.73d.EN.cab
CAB: \Storage Card\pda keep\pda apps\UltimateLaunchv1.2C.cab
CAB: \Storage Card\pda keep\pda apps\Task Manager 3.1.cab
CAB: \Storage Card\pda keep\pda apps\Ginvaders ver.6.cab
CAB: \Storage Card\pda keep\pda apps\RingoMobile.cab
CAB: \Storage Card\pda keep\pda apps\StopWatchV2.2.CAB
CAB: \Storage Card\pda keep\pda apps\footprints.cab
CAB: \Storage Card\pda keep\pda apps\MorphGearA.cab
CAB: \Storage Card\pda keep\pda apps\AEBplus2.6.1.cab
CAB: \Storage Card\pda keep\pda apps\Diamond Ati d3d driver.cab
CAB: \Storage Card\pda keep\pda apps\Opera_Build15529.cab
CAB: \Storage Card\pda keep\pda apps\VITO Audio Notes v1.32.cab
CAB: \Storage Card\pda keep\pda apps\htorch_v3.2.cab
CAB: \Storage Card\pda keep\pda apps\VGA_MusicID_1_3_16.cab
CAB: \Storage Card\pda keep\pda apps\tomtom7.91.cab
CAB: \Storage Card\pda keep\pda apps\HTC.Audio.Manager.v1.02.1017.717(SmartLyrics2).cab
CAB: \Storage Card\pda keep\fun apps\lunarTilt.95.cab
CAB: \Storage Card\pda keep\fun apps\Lightsaber_1.0.CAB
CAB: \Storage Card\pda keep\pda apps\slingplayer\SlingPlayerMobile42.cab
XML: \Storage Card\pda keep\pda apps\slingplayer\SlingSettings.xml
XML: \Storage Card\pda keep\pda apps\IMAPemail.xml
CAB: \Storage Card\pda keep\pda apps\TCPMP.cab
CAB: \Storage Card\pda keep\pda apps\TopBarIcons.cab
CAB: \Storage Card\pda keep\pda apps\ICR.cab
CAB: \Storage Card\pda keep\pda apps\RescoExplore7.05.CAB
CAB: \Storage Card\pda keep\pda apps\Qik0.2.25.cab
CAB: \Storage Card\pda keep\pda apps\TaskFacade4.cab
CAB: \Storage Card\pda keep\pda apps\InCall_Screenv1.0.17 UC.CAB
CAB: \Storage Card\pda keep\pda apps\ScreenCapv1.11f.CAB
CAB: \Storage Card\pda keep\pda apps\GForce.CAB
CAB: \Storage Card\pda keep\pda apps\RingTones.CAB
CAB: \Storage Card\pda keep\pda apps\vxUtil.cab
CAB: \Storage Card\pda keep\pda apps\sensorlockV.4.0.CAB
CAB: \Storage Card\pda keep\pda apps\Mobile Office 2007.CAB
CAB: \Storage Card\pda keep\pda apps\regedits.cab
LOCK:Disabled
HIDE:Enabled
CAB: \Storage Card\pda keep\pda apps\FTouchSL_2.9.cab
;CAB: \Storage Card\pda keep\pda apps\TouchResponse_v0_3_2.CAB
CAB: \Storage Card\pda keep\pda apps\livesearchwm6.cab
CAB: \Storage Card\pda keep\pda apps\MortScript4.2.cab
CPY1:\Storage Card\pda keep\pda apps\makefolders.mscr
CPY2:\windows\makefolders.mscr
EXEC:\windows\makefolders.mscr
CPY1:\Storage Card\pda keep\AutoBackup\pim.vol
CPY2:\pim.vol
CPY1:\Storage Card\pda keep\pda apps\FileRestore.mscr
CPY2:\windows\FileRestore.mscr
EXEC:\windows\FileRestore.mscr
CAB: \Storage Card\pda keep\pda apps\BackupFiles.cab
LOCK:Enabled
HIDE:Disabled
RST: Reset
+1 for SBP Backup.....
Look at a little project of mine
http://forum.xda-developers.com/showthread.php?t=491175
I've looked everywhere to see where I can find a way to backup settings and files and cabs and such from my roms to make it easier to restore everything after updating roms, but I can't find a decent, easy to use program. Bengalih got banned and the sashimi program got the boot too I guess. So my question is, does anyone know of a proper way to backup everything, or is there an actual cab or program to use?
psykotic24 said:
I've looked everywhere to see where I can find a way to backup settings and files and cabs and such from my roms to make it easier to restore everything after updating roms, but I can't find a decent, easy to use program. Bengalih got banned and the sashimi program got the boot too I guess. So my question is, does anyone know of a proper way to backup everything, or is there an actual cab or program to use?
Click to expand...
Click to collapse
Just to clarify...he didn't get banned he just left and deleted all of this threads. Advanced Configuration can save a lot of settings that you want on your ROM. Also can also try OEMizer...just google it you will find it.
AllTheWay said:
Just to clarify...he didn't get banned he just left and deleted all of this threads. Advanced Configuration can save a lot of settings that you want on your ROM. Also can also try OEMizer...just google it you will find it.
Click to expand...
Click to collapse
Ok so with OEMizer is it possible to use it with someone else's rom? Like I use Energy's roms and I want to import my cabs and settings without having to redo them everytime I upgrade, (which is every time he brings out an update, lol). Will this work with his stuff since it has to be put into a rom? I guess I'm still stupid with this, lol.
UC + xcopyce
Normally I wouldn't worry about restoring stuff, but I can't stop flashing. A new Energy rom seems to come almost every day and I am just curious enough to see what the latest one does.
Most of the roms are uc compatable. This means you just create a text file called SDConfig.txt and drop your cab files in a folder labeled cabs. The cabs will be installed automatically. Here is a copy of my sdconfit.txt
-------------------------------------------------------------------------
LOCK:Enabled
CAB: \Storage Card\Cabs\Shreveport_LA-775735950.cab
CAB: \Storage Card\Cabs\Advanced_Configuration_Tool_v3.3.cab
CAB: \Storage Card\Cabs\amAzeGPS.CAB
CAB: \Storage Card\Cabs\Facebook_v1.0.0.7p.CAB
CAB: \Storage Card\Cabs\FootPrintsVE 1.0.18223925.CAB
CAB: \Storage Card\Cabs\GoogleMaps_compressed.CAB
CAB: \Storage Card\Cabs\htcAddicts cleanRAM v1.5.0.cab
CAB: \Storage Card\Cabs\HTC.YouTube.v1.6.1820.4128.CAB
CAB: \Storage Card\Cabs\Ilium.RSS.v2.1.1.1077.CAB
CAB: \Storage Card\Cabs\LiveSearchWM6.CAB
CAB: \Storage Card\Cabs\PockeTwitv75b.CAB
CAB: \Storage Card\Cabs\Touch_InCall_Screen_Tweak v1.1.2 with UC.CAB
CAB: \Storage Card\Cabs\CorePlayer.v1.2.5.Build.4506.Pre.Regged.(Windows.Mobile)-amivoytec.cab
CAB: \Storage Card\Cabs\TOUCH PRO MEGA ARCADE V2.1.cab
CAB: \Storage Card\Cabs\WM_TRANSCRIBER_2(2).CAB
CAB: \Storage Card\Cabs\pandora_1.1.10.cab
CAB: \Storage Card\Cabs\elitemway_Pedometer_1.42.cab
CAB: \Storage Card\Cabs\Opera9.16277.CAB
CAB: \Storage Card\Cabs\Giannis86 Globe Add-On.CAB
CAB: \Storage Card\Cabs\Showaco Chome Editor_Beta1.6.cab
CAB: \Storage Card\Cabs\reSTART.CAB
CAB: \Storage Card\Cabs\apptodate.cab
CPY1:\Storage Card\xcopyce.exe
CPY2:\Temp\xcopyce.exe
EXEC:\Temp\xcopyce.exe
LOCKisabled
RST: Reset
---------------------------------------------------------------------------
I also noticed most of my programs loaded to my storage card would run just fine without a reinstall. So I copied the shortcuts from \Windows\Start Menu\Programs\ and put them in my cab folder. I then used xcopyce to copy the shortcut folders from my cab folder back to the programs folder. Xcopyce.exe uses settings from a configuration file called xcopyce.txt. Here is a copy of my xcopyce.txt file.
-----------------------------------------------------------------------
#Copy Bob's from Storage Card Cabs folder to your Device
"\Storage Card\Cabs\FITNESS" "\Windows\Start Menu\Programs\FITNESS"
"\Storage Card\Cabs\TOOLS" "\Windows\Start Menu\Programs\Utilities"
"\Storage Card\Cabs\GPS" "\Windows\Start Menu\Programs\GPS"
"\Storage Card\Cabs\GAMES" "\Windows\Start Menu\Programs\GAMES"
"\Storage Card\Cabs\MULTIMEDIA" "\Windows\Start Menu\Programs\Multimedia"
"\Storage Card\Cabs\OFFICE Mobile" "\Windows\Start Menu\Programs\Office Mobile"
------------------------------------------------------------------------
I found all this information on xda, so the files are there if you do a little digging.
good luck,
Ok just to be clear... I'm wanting to save my mail settings, my weather settings and my tray icons. What do I use to save those settings. And for the cabs do I put the txt file on my sd card? And where?
Sashimi is now at winmo-experts.com. There are lots of tutorials and entire forum to learn how to use it. You might also want to get sktools and sktracker-they're both excellent apps for backing up user settings. You can re-cab installed programs (most of the time) with sk tools, including your personal settings (and registration info). It's pretty easy. SKTracker will take snapshots of the registry, file system and databases before and after you change program settings, and it will compare your system before and after to tell you what changed. It's like windiff, only done on the ppc and way cooler.
I'd recommend focusing on sashimi vs. UC. It's easier to modify on the fly, and you can run it after the ppc boots up and after you see what's been cooked into the rom. You're less likely to import something dumb that screws things up, as is easy to do with UC.
Thank you all so much... Absolute lifesavers
If you want to dig into it, you can do some pretty advanced stuff with UC and XML provisioning files - you just gotta read up on the MS developer site - its actually very handy. Here are some of my files:
SDConfig.txt
Code:
LOCK:Enabled
CAB: \Storage Card\CABs\System\RTConfig.CAB
CAB: \Storage Card\CABs\Settings\LumosSetupV10RC2.CAB
XML: \Storage Card\UC\AdvancedConfig.xml
XML: \Storage Card\UC\Registry.xml
XML: \Storage Card\UC\Other.xml
XML: \Storage Card\UC\Menu.xml
LOCK:Disabled
RST: Reset
Note how few CABs I install - Most I have installed on my storage card and just create links to in Menu.xml, much like BOBBYDAVIS does.
Note how I break up my provisioning into several files. This allows for easier reading/editing. Plus if something doesn't work in the provisioning files, it's easier to pinpoint and it doesn't break everything.
AdvancedConfig.xml stores many different registry tweaks I use.
Registry.xml stores more basic registry information such as owner information and basic settings.
Other.xml sets up my ActiveSync, Email, and a few other things
Menu.xml creates (CREATES, not copies!) links to applications already on my storage card.
Other.xml - Contains some of my favorite setup information - ActiveSync and Mail are setup here automatically - all I do is enter my password for them! (You can store your password in here as well, but I don't like to since it's plaintext and unsecure)
Note: I changed some values for my own privacy.
Code:
<wap-provisioningdoc>
<!-- *** Setting up Clock *** -->
<characteristic type="clock">
<parm name="TimeZone" value="4"/>
</characteristic>
<characteristic type="Sounds">
<characteristic type="HKCU\ControlPanel\Sounds\RingTone0">
<parm name="Sound" value="\Storage Card\My Documents\My Ringtones\RINGTONE.mid"/>
</characteristic>
</characteristic>
<!-- *** Setting up E-Mail *** -->
<characteristic type="EMAIL2">
<characteristic type="{8d01f748-b5a3-45b6-a38a-3cd70a4e3839}">
<parm name="SERVICENAME" value="Gmail" />
<parm name="SERVICETYPE" value="IMAP4" />
<parm name="INSERVER" value="imap.gmail.com" />
<parm name="OUTSERVER" value="smtp.gmail.com" />
<parm name="NAME" value="********" />
<parm name="AUTHNAME" value="********@gmail.com" />
<parm name="AUTHSECRET" value="" />
<parm name="DOMAIN" value="" />
<parm name="REPLYADDR" value="********@gmail.com" />
<parm name="LINGER" value="15" />
<parm name="RETRIEVE" value="-1" />
<parm name="KEEPMAX" value="-1" />
<parm name="DWNDAY" value="3" />
<parm name="AUTHREQUIRED" value="1" />
<parm name="SMTPALTENABLED" value="1" />
<parm name="SMTPALTAUTHNAME" value="********@gmail.com" />
<parm name="SMTPALTPASSWORD" value="" />
<parm name="SMTPALTDOMAIN" value="smtp.gmail.com" />
</characteristic>
</characteristic>
<!-- *** Setting up Google ActiveSync *** -->
<characteristic type="Sync">
<characteristic type="Connection">
<parm name="Server" value="m.google.com"/>
<parm name="User" value="********@gmail.com"/>
<parm name="Domain" value=""/>
<parm name="AllowSSLOption" value="1"/>
</characteristic>
<characteristic type="Settings">
<parm name="PeakStartTime" value="0800"/>
<parm name="PeakEndTime" value="1800"/>
<parm name="PeakFrequency" value="0"/>
<parm name="BodyTruncation" value="5120"/>
<characteristic type="PeakDays">
<parm name="Sun" value="0"/>
<parm name="Mon" value="1"/>
<parm name="Tue" value="1"/>
<parm name="Wed" value="1"/>
<parm name="Thr" value="1"/>
<parm name="Fri" value="1"/>
<parm name="Sat" value="0"/>
</characteristic>
</characteristic>
<characteristic type="Calendar">
<parm name="Enabled" value="1"/>
</characteristic>
<characteristic type="Contacts">
<parm name="Enabled" value="1"/>
</characteristic>
<characteristic type="Tasks">
<parm name="Enabled" value="0"/>
</characteristic>
<characteristic type="Mail">
<parm name="Enabled" value="0"/>
</characteristic>
</characteristic>
<!-- *** Setting up OBEX File Transfers *** -->
<characteristic type="Obex">
<characteristic type="HKLM\Software\Microsoft\Obex">
<parm name="IsEnabled" value="1"/>
</characteristic>
</characteristic>
<!-- *** Copy Lumos Configuration Files *** -->
<characteristic type="FileOperation">
<characteristic type="\Program Files\Lumos\" translation="install">
<characteristic type="MakeDir" />
<characteristic type="settings.txt" translation="install">
<characteristic type="Copy">
<parm name="Source" value="\Storage Card\UC\settings\Lumos.txt" translation="install" />
</characteristic>
</characteristic>
</characteristic>
</characteristic>
<!-- *** Setup Browser Favorites *** -->
<characteristic type="BrowserFavorite">
<characteristic type="CHP Traffic Incident Reports">
<parm name="URL" value="http://cad.chp.ca.gov/"/>
<parm name="Order" value="0"/>
</characteristic>
</characteristic>
</wap-provisioningdoc>
Hi all,
I try to deodex my rom but have issues with 3 files like framework.odex
Can someone help me please?
Th in adavnce.
Dexx
Code:
NOW AT FILE 16 OF 34 IN system/framework: framework.odex
Disassembling framework.odex ...
java -Xmx512m -jar baksmali.jar -a 17 -d ../framework -x framework.odex
Error occured while disassembling class Landroid.filterpacks.imageproc.FisheyeFi lter; - skipping class
java.lang.RuntimeException: Invalid method index: 30
at org.jf.dexlib.Code.Analysis.InlineMethodResolver$InlineMethodResolver _version36.resolveExecuteInline(InlineMethodResolver.java:157)
at org.jf.dexlib.Code.Analysis.DeodexUtil.lookupInlineMethod(DeodexUtil. java:64)
at org.jf.dexlib.Code.Analysis.MethodAnalyzer.analyzeExecuteInline(Metho dAnalyzer.java:3467)
at org.jf.dexlib.Code.Analysis.MethodAnalyzer.analyzeInstruction(MethodA nalyzer.java:1087)
at org.jf.dexlib.Code.Analysis.MethodAnalyzer.analyze(MethodAnalyzer.jav a:213)
at org.jf.baksmali.Adaptors.MethodDefinition.addAnalyzedInstructionMetho dItems(MethodDefinition.java:389)
at org.jf.baksmali.Adaptors.MethodDefinition.getMethodItems(MethodDefini tion.java:311)
at org.jf.baksmali.Adaptors.MethodDefinition.writeTo(MethodDefinition.ja va:132)
at org.jf.baksmali.Adaptors.ClassDefinition.writeMethods(ClassDefinition .java:338)
at org.jf.baksmali.Adaptors.ClassDefinition.writeDirectMethods(ClassDefi nition.java:294)
at org.jf.baksmali.Adaptors.ClassDefinition.writeTo(ClassDefinition.java :116)
at org.jf.baksmali.baksmali.disassembleDexFile(baksmali.java:186)
at org.jf.baksmali.main.main(main.java:308)
Error occured while disassembling class Landroid.gesture.GestureUtils; - skippin g class
java.lang.RuntimeException: Invalid method index: 30
at org.jf.dexlib.Code.Analysis.InlineMethodResolver$InlineMethodResolver _version36.resolveExecuteInline(InlineMethodResolver.java:157)
at org.jf.dexlib.Code.Analysis.DeodexUtil.lookupInlineMethod(DeodexUtil. java:64)
at org.jf.dexlib.Code.Analysis.MethodAnalyzer.analyzeExecuteInline(Metho dAnalyzer.java:3467)
at org.jf.dexlib.Code.Analysis.MethodAnalyzer.analyzeInstruction(MethodA nalyzer.java:1087)
at org.jf.dexlib.Code.Analysis.MethodAnalyzer.analyze(MethodAnalyzer.jav a:213)
at org.jf.baksmali.Adaptors.MethodDefinition.addAnalyzedInstructionMetho dItems(MethodDefinition.java:389)
at org.jf.baksmali.Adaptors.MethodDefinition.getMethodItems(MethodDefini tion.java:311)
at org.jf.baksmali.Adaptors.MethodDefinition.writeTo(MethodDefinition.ja va:132)
at org.jf.baksmali.Adaptors.ClassDefinition.writeMethods(ClassDefinition .java:338)
at org.jf.baksmali.Adaptors.ClassDefinition.writeDirectMethods(ClassDefi nition.java:294)
at org.jf.baksmali.Adaptors.ClassDefinition.writeTo(ClassDefinition.java :116)
at org.jf.baksmali.baksmali.disassembleDexFile(baksmali.java:186)
at org.jf.baksmali.main.main(main.java:308)
Error occured while disassembling class Landroid.hardware.GeomagneticField; - sk ipping class
java.lang.RuntimeException: Invalid method index: 30
at org.jf.dexlib.Code.Analysis.InlineMethodResolver$InlineMethodResolver _version36.resolveExecuteInline(InlineMethodResolver.java:157)
at org.jf.dexlib.Code.Analysis.DeodexUtil.lookupInlineMethod(DeodexUtil. java:64)
at org.jf.dexlib.Code.Analysis.MethodAnalyzer.analyzeExecuteInline(Metho dAnalyzer.java:3467)
at org.jf.dexlib.Code.Analysis.MethodAnalyzer.analyzeInstruction(MethodA nalyzer.java:1087)
at org.jf.dexlib.Code.Analysis.MethodAnalyzer.analyze(MethodAnalyzer.jav a:213)
at org.jf.baksmali.Adaptors.MethodDefinition.addAnalyzedInstructionMetho dItems(MethodDefinition.java:389)
at org.jf.baksmali.Adaptors.MethodDefinition.getMethodItems(MethodDefini tion.java:311)
at org.jf.baksmali.Adaptors.MethodDefinition.writeTo(MethodDefinition.ja va:132)
at org.jf.baksmali.Adaptors.ClassDefinition.writeMethods(ClassDefinition .java:338)
at org.jf.baksmali.Adaptors.ClassDefinition.writeDirectMethods(ClassDefi nition.java:294)
at org.jf.baksmali.Adaptors.ClassDefinition.writeTo(ClassDefinition.java :116)
at org.jf.baksmali.baksmali.disassembleDexFile(baksmali.java:186)
at org.jf.baksmali.main.main(main.java:308)
Error occured while disassembling class Landroid.location.Location; - skipping c lass
java.lang.RuntimeException: Invalid method index: 30
at org.jf.dexlib.Code.Analysis.InlineMethodResolver$InlineMethodResolver _version36.resolveExecuteInline(InlineMethodResolver.java:157)
at org.jf.dexlib.Code.Analysis.DeodexUtil.lookupInlineMethod(DeodexUtil. java:64)
at org.jf.dexlib.Code.Analysis.MethodAnalyzer.analyzeExecuteInlineRange( MethodAnalyzer.java:3505)
at org.jf.dexlib.Code.Analysis.MethodAnalyzer.analyzeInstruction(MethodA nalyzer.java:1090)
at org.jf.dexlib.Code.Analysis.MethodAnalyzer.analyze(MethodAnalyzer.jav a:213)
at org.jf.baksmali.Adaptors.MethodDefinition.addAnalyzedInstructionMetho dItems(MethodDefinition.java:389)
at org.jf.baksmali.Adaptors.MethodDefinition.getMethodItems(MethodDefini tion.java:311)
at org.jf.baksmali.Adaptors.MethodDefinition.writeTo(MethodDefinition.ja va:132)
at org.jf.baksmali.Adaptors.ClassDefinition.writeMethods(ClassDefinition .java:338)
at org.jf.baksmali.Adaptors.ClassDefinition.writeDirectMethods(ClassDefi nition.java:294)
at org.jf.baksmali.Adaptors.ClassDefinition.writeTo(ClassDefinition.java :116)
at org.jf.baksmali.baksmali.disassembleDexFile(baksmali.java:186)
at org.jf.baksmali.main.main(main.java:308)
Error occured while disassembling class Landroid.util.MathUtils; - skipping clas s
java.lang.RuntimeException: Invalid method index: 30
at org.jf.dexlib.Code.Analysis.InlineMethodResolver$InlineMethodResolver _version36.resolveExecuteInline(InlineMethodResolver.java:157)
at org.jf.dexlib.Code.Analysis.DeodexUtil.lookupInlineMethod(DeodexUtil. java:64)
at org.jf.dexlib.Code.Analysis.MethodAnalyzer.analyzeExecuteInline(Metho dAnalyzer.java:3467)
at org.jf.dexlib.Code.Analysis.MethodAnalyzer.analyzeInstruction(MethodA nalyzer.java:1087)
at org.jf.dexlib.Code.Analysis.MethodAnalyzer.analyze(MethodAnalyzer.jav a:213)
at org.jf.baksmali.Adaptors.MethodDefinition.addAnalyzedInstructionMetho dItems(MethodDefinition.java:389)
at org.jf.baksmali.Adaptors.MethodDefinition.getMethodItems(MethodDefini tion.java:311)
at org.jf.baksmali.Adaptors.MethodDefinition.writeTo(MethodDefinition.ja va:132)
at org.jf.baksmali.Adaptors.ClassDefinition.writeMethods(ClassDefinition .java:338)
at org.jf.baksmali.Adaptors.ClassDefinition.writeDirectMethods(ClassDefi nition.java:294)
at org.jf.baksmali.Adaptors.ClassDefinition.writeTo(ClassDefinition.java :116)
at org.jf.baksmali.baksmali.disassembleDexFile(baksmali.java:186)
at org.jf.baksmali.main.main(main.java:308)
Assembling into classes.dex ...
java -Xmx512m -jar smali.jar -a 17 -o classes.dex out
out\android\filterpacks\imageproc\FisheyeFilter.smali[0,-1] mismatched input '<E OF>' expecting END_METHOD_DIRECTIVE
out\android\gesture\GestureUtils.smali[0,-1] no viable alternative at input '<EO F>'
out\android\hardware\GeomagneticField.smali[0,-1] no viable alternative at input '<EOF>'
out\android\location\Location.smali[0,-1] no viable alternative at input '<EOF>'
out\android\util\MathUtils.smali[0,-1] no viable alternative at input '<EOF>'
WARNING: Unable to produce classes.dex!
ERROR: Aborting framework.odex