Related
Okay I have 2.47 SPL, 3.42.30 Radio, 3.2.3 Rom and Telus Carrier Cab. I have installed adobe reader from adobe.com and now I can not just click on the adobe file to open it. I have to run the adobe program first then open the file through adobe. Anyone have an adobe that will work like it used too!
Cheers
jcglendenning said:
Okay I have 2.47 SPL, 3.42.30 Radio, 3.2.3 Rom and Telus Carrier Cab. I have installed adobe reader from adobe.com and now I can not just click on the adobe file to open it. I have to run the adobe program first then open the file through adobe. Anyone have an adobe that will work like it used too!
Cheers
Click to expand...
Click to collapse
I have seen this on many of my installs. Try turning off the "reflow" option. I think that is what it is called any way. It seems that a large picture, (London Tube map for instance), does not open with this option on. Let me know if my guess is correct.
Cheers
Perhaps you can try MyExtensions and register the extensions manually?
http://www.badschwii.com/software_features.asp?swid=2
Try using the latest version (2.5). The version on Adobe's site is 2.0. Uninstall the version you have now and install the version I've attached below and let me know.
gc14 said:
Try using the latest version (2.5). The version on Adobe's site is 2.0. Uninstall the version you have now and install the version I've attached below and let me know.
Click to expand...
Click to collapse
Is this the same version that is the "Lite" in the DCD kitchens? It is working for me.
Yes, but in cab format instead of OEM.
Bravo! Bravo! gc14, thanks a bunch it did do the trick. aaaaahh simple fixes are very nice.
I see those peskee yankees are playing the sox saturday I am in New York but going to try to pop up to boston to catch the game. Saturday or sunday. By the way I am canadian so go sox go!
I see those peskee yankees are playing the sox saturday I am in New York but going to try to pop up to boston to catch the game. Saturday or sunday. By the way I am canadian so go sox go!
Click to expand...
Click to collapse
Amen brother, Amen. Glad to see fellow members of the nation around these boards.
How to uninstall adobe reader
I installed the 2.5 version provided in this forum, and I thought it was going to install over the 2.0 version provided with my 6.1 rom, but it didnt, now i have both versions installed, I would like to know how to unistall the previous version.
Thank you
cpinilla1986 said:
I installed the 2.5 version provided in this forum, and I thought it was going to install over the 2.0 version provided with my 6.1 rom, but it didnt, now i have both versions installed, I would like to know how to unistall the previous version.
Thank you
Click to expand...
Click to collapse
uninstall both first.
then install gc14 cab
May I *HIGHLY* recommend you install FoxIt Reader instead of the bloatware from Adobe.
On our poor Titans that suffer from lack of RAM, Adobe runs very slowly and eats up just about all your available resources.
I used the Adobe reader for many months until I came across Foxit, and it runs SO much faster and smoother, with all the same features.
cyberhern said:
uninstall both first.
then install gc14 cab
Click to expand...
Click to collapse
How do I uninstall the version that came with with the ROM?
cpinilla1986 said:
How do I uninstall the version that came with with the ROM?
Click to expand...
Click to collapse
go to about tab and get version.
if it is 2.0
download install cab.
run install cab.
as soon as install sees you have a previous install it will ask you if you want to uninstall hit yes.
install will then ask you where you want new intall:
m mem
or SD card
or cancel.
HIT CANCEL, then okay
done
cyberhern said:
go to about tab and get version.
if it is 2.0
download install cab.
run install cab.
as soon as install sees you have a previous install it will ask you if you want to uninstall hit yes.
install will then ask you where you want new intall:
m mem
or SD card
or cancel.
HIT CANCEL, then okay
done
Click to expand...
Click to collapse
thank you but it did not give me that option
As described in the title ,here comes download link of AcoMMS_5.0.70.24.CAB in DEV&HACK of this forum:
<..................................ArcSOFT MMS_5.0.70.24.CAB download link..................................>
Enjoying&happy weekend.
Thanks for this!
Where is this taken from?
I was waiting for a working release of ArcSoft's latest for a long time, thank you very much for this, can't wait to test it!
@l3v5y
It was taken from New Alltel rom.Here is the original post:
ArcoSoft MMS_5.0.70.24.CAB Original POST,you can get more details HERE
l3v5y said:
Thanks for this!
Where is this taken from?
Click to expand...
Click to collapse
Yep,it works very very good on my WM6.1_M2D of Gullum's OCT4_Beta1.
BTW:You must have to modify the config settings of MMSC server,default server settings is AT&T.
God bless you
dwizard said:
I was waiting for a working release of ArcSoft's latest for a long time, thank you very much for this, can't wait to test it!
Click to expand...
Click to collapse
the beta6 works great on my dopod 830 (pophet) with wm6.1. the carrier is china mobile. just one little problem: there's no icon shows for mms in inbox. see attached pic for detail, first two are mms, there's no icon at the left. sms (the last two) are ok.
HI,zhuyimin
Which rom are you using?
你用的哪个版本ROM？耗量情况如何？我最近一直在用19701,觉得倒是稳定，也比较省电，不知道新的ROM哪个速度将就，也比较省电。
谢谢~
Yuking said:
HI,zhuyimin
Which rom are you using?
你用的哪个版本ROM？耗量情况如何？我最近一直在用19701,觉得倒是稳定，也比较省电，不知道新的ROM哪个速度将就，也比较省电。
谢谢~
Click to expand...
Click to collapse
i'm using l3v5y's clean 20270 rom. it's fast and stable.. i recommend you have a try. if you use dopod 830 which has no wifi modual, you MUST delete wifiinti.lnk from startup folder after you flash rom, otherwise your SD card can not be accessed.
do not use the clean+mms version from as arcosfot mms composer in this rom can not recieve mms with china mobile.
Has anyone figured out how to upgrade the Opera build on the Touch Pro?
I couldn't get the newer CAB installer to even run. Others have reported that it worked but it just installs a second copy.
muzicman82 said:
Has anyone figured out how to upgrade the Opera build on the Touch Pro?
I couldn't get the newer CAB installer to even run. Others have reported that it worked but it just installs a second copy.
Click to expand...
Click to collapse
I didn't have any troubles installing the cab.
Delete your cab and re-download. Perhaps your cab is bad.
Well does this indeed upgrade the currently installed Opera, or install another copy next to the integrated one? I want to keep the install integrated with TouchFLO 3D.
http://forum.xda-developers.com/showpost.php?p=2861767&postcount=9
Install that just as it is, it SHOULD say that the old version will be removed first then this one will install. Ive never had any issues with it.
But is that version newer than the one installed in the CDMA (sprint) touch pro? The post date is back in April, and the touch pro (CDMA) just came out this month.
Yea, the Sprint Touch Pro has Opera 9.5 Beta on it already, it's just that the build is newer.. It has a date of 10/20/08.
Based on that link, does someone have to mod the installer that is on Opera's website for it to work?
sracercelica said:
But is that version newer than the one installed in the CDMA (sprint) touch pro? The post date is back in April, and the touch pro (CDMA) just came out this month.
Click to expand...
Click to collapse
The build was posted on the 4th of november not the 11th of april!
It is build 2745 the newest out there at the moment.
I just installed the new build. It installed fine, but it wouldn't delete the version that came with the phone. So now I have two copies of Opera in my Touch Pro and I don't know how to differentiate the builds, they both look the same when I open them and I can't find the "info" link in Opera to see which build I've opened.
They dont look the same to me.
When they load they come up differently for me.
The newer version comes up with smaller menu's more for a stylus, and the older, stock, version has big menu buttons. They seem to function slightly different on the zooming.
Just what I noticed.
Won't let the preinstalled Opera be uninstalled. Will only let you install in parallel. Someone needs to have a fix for this.
okolowitz said:
Won't let the preinstalled Opera be uninstalled. Will only let you install in parallel. Someone needs to have a fix for this.
Click to expand...
Click to collapse
There is no problem with having them both installed.
Just manually remove the old one from the programs menu in File Explorer.
The newest version will be set to default after install.
http://www.megaupload.com/?d=PASJ6BX2
drop those in the windows folder to update opera.
Ok, just ignored the uninstall error and installed anyway. Doesn't seem to have left two versions. All links launch the new version. Thanks for your responses!
nFKT said:
http://www.megaupload.com/?d=PASJ6BX2
drop those in the windows folder to update opera.
Click to expand...
Click to collapse
does this work?
nFKT said:
http://www.megaupload.com/?d=PASJ6BX2
drop those in the windows folder to update opera.
Click to expand...
Click to collapse
hmm.. so has anyone tried this yet?
Works fine for me. Just ignore the two uninstall questions. Yes to uninstall & yes to install anyway. I didn't end up with two sets of icons or two installations.
Try this.
http://forum.ppcgeeks.com/showpost.php?p=491258&postcount=53
what's the difference between the version that comes stock and this version other than the build. is it a noticable improvement and what does it improve on?
nFKT said:
http://www.megaupload.com/?d=PASJ6BX2
drop those in the windows folder to update opera.
Click to expand...
Click to collapse
This works! opera now showing 2745 in my phone installed flash lite 3.1 and have flash working also. awesome!
chino331 said:
This works! opera now showing 2745 in my phone installed flash lite 3.1 and have flash working also. awesome!
Click to expand...
Click to collapse
wheres a good place to get flash lite and anyone have a cab, i cant DL from PPC geeks for some reason.......
also would it hurt to delete internet explporer, and would that defult all other programs to opera after???
I am having trouble cooking NETCF3.5 in. I am using the latest ROM. All I did was clean it out by removing mostly media files and a few apps. When I try to cook NetCF3.5 into the ROM it will not work. I have used OEM packages from Da_G and NATF both with no luck. Is there anything else that needs to be done for NETCF3.5 to work besides copying over the folders?
Thanks in advance!
The package maybe setup for a certain files and I think deleting it will cause error.
I have not problem with CF3.5 building using Da_G Kitchen.
At0mAng said:
I am having trouble cooking NETCF3.5 in. I am using the latest ROM. All I did was clean it out by removing mostly media files and a few apps. When I try to cook NetCF3.5 into the ROM it will not work. I have used OEM packages from Da_G and NATF both with no luck. Is there anything else that needs to be done for NETCF3.5 to work besides copying over the folders?
Thanks in advance!
Click to expand...
Click to collapse
You are removing netcf 2.0 correct?
aruppenthal said:
You are removing netcf 2.0 correct?
Click to expand...
Click to collapse
I believe I removed it during my testing Should it be removed?
Edit
I got it working...just created my own package and now for some reason it is working.
Thanks.
At0mAng said:
I believe I removed it during my testing Should it be removed?
Edit
I got it working...just created my own package and now for some reason it is working.
Thanks.
Click to expand...
Click to collapse
Yes 3.5 is backwards compatible with all older netcf. Make sure you remove 2.0. Look in sys and make sure there is no folder named "netcf". Then add your netcf 3.5 to sys.
DSM files process in order so if your netcf comes after netcf 3.5 you will overwrite some of 3.5 thus making it work incorrectly.
I also recommend adding netcf messages as well.
If you have any more issues send me a PM and ill upload both for you when I get home from work.
EDIT: Awesome
Thanks for the help. I may not removed NetCF2. New at this and learing netcf messages is in there as well.
Guys,
I think I also having problem with NetCF, not sure what went wrong.
Diamond TF3D Config is not running in my ROM but Diamond Tweak and AdvancedConfig which I believe also depend on NetCF are working.
Any advise? I'm using Da_G's kitchen btw.
Cheers!
vibranze said:
Guys,
I think I also having problem with NetCF, not sure what went wrong.
Diamond TF3D Config is not running in my ROM but Diamond Tweak and AdvancedConfig which I believe also depend on NetCF are working.
Any advise? I'm using Da_G's kitchen btw.
Cheers!
Click to expand...
Click to collapse
Sounds like a package error then. Are you using a premade package or did you make your own?
If I use normal kitchen, eg. juggler, etc then everything's fine but using Da_G's kitchen I had problem with Diamond TF3D Config.
I tried a lot of NetCF OEM packages, as well as created my own. Now trying yours, the one in Tilt's OEM packages Report back later.
V
aruppenthal said:
Sounds like a package error then. Are you using a premade package or did you make your own?
Click to expand...
Click to collapse
vibranze said:
If I use normal kitchen, eg. juggler, etc then everything's fine but using Da_G's kitchen I had problem with Diamond TF3D Config.
I tried a lot of NetCF OEM packages, as well as created my own. Now trying yours, the one in Tilt's OEM packages Report back later.
V
Click to expand...
Click to collapse
I have found that some NetCF3.5 are giving errors with different programs. I have not tried my package I made with Diamond Config but will try. If it works you are more than welcome to have my package.
Edit
Well Diamond Config is working with my NetCF3.5. You can get it here http://www.4shared.com/file/87085992/700bfd57/NETCF35.html
Make sure you delete all NetCF folders and place this in the SYS folder.
Good luck
Thanks At0mAng,
Are you using Da_G's kitchen to cook your ROM? If yes, should I delete all the NetCF packages under PACKAGES folder, even I unticked them during BuildOS package selection?
Cheers,
V
vibranze said:
Thanks At0mAng,
Are you using Da_G's kitchen to cook your ROM? If yes, should I delete all the NetCF packages under PACKAGES folder, even I unticked them during BuildOS package selection?
Cheers,
V
Click to expand...
Click to collapse
No I am using a different Kitchen. Unchecking them should be fine and place the NetCF35 folder into the sys folder. Did you have both NetCF2 and NetCF3.5 clicked when building your ROM? As I found out having both cooked is not good.
Hi At0mAng,
Same result I tried both NetCF2 alone and NetCF2 with NetCF3.5 with same result. I think it's something to do with the kitchen.
Will try to use Juggler's kitchen and report back.
Cheers!
At0mAng said:
No I am using a different Kitchen. Unchecking them should be fine and place the NetCF35 folder into the sys folder. Did you have both NetCF2 and NetCF3.5 clicked when building your ROM? As I found out having both cooked is not good.
Click to expand...
Click to collapse
@At0mAng @aruppenthal,
I started from afresh, using the Da_G's kitchen, took only NetCF3.5 and other apps to the minimum and Diamond TF3D still gave me the error. I attached the screenshot here for reference in case some of you know the root cause. Thanks.
V
vibranze said:
@At0mAng @aruppenthal,
I started from afresh, using the Da_G's kitchen, took only NetCF3.5 and other apps to the minimum and Diamond TF3D still gave me the error. I attached the screenshot here for reference in case some of you know the root cause. Thanks.
V
Click to expand...
Click to collapse
Your netcf 35 is not working. You need to put netcf 35 in sys not in packages. Make sure there is not a folder called netcf in sys. That is 2.0 you dont want that. My guess is you also need a new tf3d package.
Hi Aruppenthal & At0mAng
Finally Diamond TF3D Config is working Thanks for your help.
Kindly refer to DaG's kitchen thread for reference
V
Hi, someone can port to VGA the new Phone Canvas extracted from last Tachi 1.28 rom?
I hope it is more fast and light than previous one.
Here the 3 packages to port
Phone_Canvas_Enhancement_4_1_50020152823_0
PhoneCanvas_5_27_0_0
Slot_Manager_1_1_2015_3731
Is there anybody.... out there?
cubetto said:
Hi, someone can port to VGA the new Phone Canvas extracted from last TAchi 1.28 rom?
I hope it is more fast and light than previous one.
Here the 3 packages to port
Phone_Canvas_Enhancement_4_1_50020152823_0
PhoneCanvas_5_27_0_0
Slot_Manager_1_1_2015_3731
Click to expand...
Click to collapse
If I am to say, Tachi Phone Canvas has always been the slowest one... But it has an advantage that it doesn't need phcanvga.exe to work. So, what we need is not porting it, but removing the dual SIM support. So please change the title, because those who know to port Phone Canvases may not know how to work on this.
as far as i have read the slot manager does all the dual SIM stuff
so that needs to be modified....
so why dont you try to cook phone_Canvas_Enhancement_4_1_50020152823_0 and PhoneCanvas_5_27_0_0 from your source and use the ported slot manager from earlier port
sheennick123456 said:
as far as i have read the slot manager does all the dual SIM stuff
so that needs to be modified....
so why dont you try to cook phone_Canvas_Enhancement_4_1_50020152823_0 and PhoneCanvas_5_27_0_0 from your source and use the ported slot manager from earlier port
Click to expand...
Click to collapse
And about languages? I cook in Italian (0410) while packages are in 0804 (chinese?). Can I use localization files from older Tachi Phonecanvas version?
sheennick123456 said:
as far as i have read the slot manager does all the dual SIM stuff
so that needs to be modified....
so why dont you try to cook phone_Canvas_Enhancement_4_1_50020152823_0 and PhoneCanvas_5_27_0_0 from your source and use the ported slot manager from earlier port
Click to expand...
Click to collapse
Well, I once did that in an older version, but it didn't work, so I don't think it will work, but at least you can try.
I have tried to cook a rom with the packages on first post. Results are:
- incoming call works perfect,
- outgoing call don't works: phone shows always the message "phone is off. Turn on?" but nothing happens.
- keybord dialer is cutted
Slotmanager problem surely.
Some screenshots
i tried to mix up some new and old files and it resulted in a "shifted down" keypad (like it was WVGA). but at least it didn't say "phone is off". will investigate more this evening.
btw, does nobody know what was exactly edited on previous tachi dialer version to work on diamond?
etoy said:
i tried to mix up some new and old files and it resulted in a "shifted down" keypad (like it was WVGA). but at least it didn't say "phone is off". will investigate more this evening.
btw, does nobody know what was exactly edited on previous tachi dialer version to work on diamond?
Click to expand...
Click to collapse
Slot Manager
so phone canvas and phone canvas enhancement packages weren't touched at all? the app.reg on those two are way different too..
etoy said:
so phone canvas and phone canvas enhancement packages weren't touched at all? the app.reg on those two are way different too..
Click to expand...
Click to collapse
No. They can be different, because the Tachi Phone Canvas port here on XDA not only removed dual SIM check but also modified the Phone Canvas layout and many other thing.
cubetto,i think your packages on first page are corrupted..many files are missing inside
edit:
i don't know what every dll does so i tried to overwrite each one just to see what happens.
PhoneCanvas_5_27_0_0 package:
phonecanvas.dll --> can be overwritten without problems,the dialer still works properly. that's good i think?
Phone_Canvas_Enhancement_4_1_50020152823_0
DPadMenu.dll ok (??)
phcanImages.dll ok (graphics file)
phcanOverbmp.dll ok (graphics file)
ContactAssistDll.dll --> tachi dialer does not show,MS dialer instead
phcanrc.dll --> dialpad is shifted down..looks like it was WVGA. i can barely see the "call" button. videocall switch is present??? calls still work
etoy said:
cubetto,i think your packages on first page are corrupted..many files are missing inside
edit:
i don't know what every dll does so i tried to overwrite each one just to see what happens.
PhoneCanvas_5_27_0_0 package:
phonecanvas.dll --> can be overwritten without problems,the dialer still works properly. that's good i think?
Phone_Canvas_Enhancement_4_1_50020152823_0
DPadMenu.dll ok (??)
phcanImages.dll ok (graphics file)
phcanOverbmp.dll ok (graphics file)
ContactAssistDll.dll --> tachi dialer does not show,MS dialer instead
phcanrc.dll --> dialpad is shifted down..looks like it was WVGA. i can barely see the "call" button. videocall switch is present??? calls still work
Click to expand...
Click to collapse
I guess he didn't miss any files, and porting doesn't rely on these dlls, it's related to Slot Manager. You may try to overwrite SlotMgrInterface.dll, SlotMgrService.dll and SlotManager.exe.
etoy said:
cubetto,i think your packages on first page are corrupted..many files are missing inside
edit:
i don't know what every dll does so i tried to overwrite each one just to see what happens.
PhoneCanvas_5_27_0_0 package:
phonecanvas.dll --> can be overwritten without problems,the dialer still works properly. that's good i think?
Phone_Canvas_Enhancement_4_1_50020152823_0
DPadMenu.dll ok (??)
phcanImages.dll ok (graphics file)
phcanOverbmp.dll ok (graphics file)
ContactAssistDll.dll --> tachi dialer does not show,MS dialer instead
phcanrc.dll --> dialpad is shifted down..looks like it was WVGA. i can barely see the "call" button. videocall switch is present??? calls still work
Click to expand...
Click to collapse
I don't know it. I'll try to extract packages again from tachi 1.28 rom and add it on megaupload
cubetto said:
I don't know it. I'll try to extract packages again from tachi 1.28 rom and add it on megaupload
Click to expand...
Click to collapse
here's the right untouched packages dumped from tachi 1.28 rom. in yours some files were missing. feel free to link the attachment to first page,where i hope it's more useful than here
Phone_Canvas_Enhancement_4_1_50020152823_0
PhoneCanvas_5_27_0_0
Slot_Manager_1_1_2015_3731
etoy said:
here's the right untouched packages dumped from tachi 1.28 rom. in yours some files were missing. feel free to link the attachment to first page,where i hope it's more useful than here
Phone_Canvas_Enhancement_4_1_50020152823_0
PhoneCanvas_5_27_0_0
Slot_Manager_1_1_2015_3731
Click to expand...
Click to collapse
Ok, done.
Thx
I've tried today with fresh extracted package but no luck.
Did you make any outgoing call?
Reward offer
1 Million to port it
lol i did some random testing but didn't make it work with outgoing calls and the layout was misplaced. would be interesting to know what exactly mikeknoop edited in previous version.
etoy said:
lol i did some random testing but didn't make it work with outgoing calls and the layout was misplaced. would be interesting to know what exactly mikeknoop edited in previous version.
Click to expand...
Click to collapse
Perhaps this post will help : http://forum.xda-developers.com/showpost.php?p=3874376&postcount=526
Captain_Throwback said:
Perhaps this post will help : http://forum.xda-developers.com/showpost.php?p=3874376&postcount=526
Click to expand...
Click to collapse
Thanks Captain, I've tried to hex edit the suggested file searching the same strings on file, but no success, I can't make any call, only receive works.
I think it is necessary a real chef, not me.
Thanks again