Related
I am currently running the Cingular 2.25.0001 ipl/spl .. is there a better one out there that would be safe to upgrade to on my 8125 G4?
lol.. No one has any suggestions?! lol .. I see a couple people with 2.26 and 3.08 .. just wondering how those would work with my G4
You've got a WHOLE LOT of reading to do if you're thinking about changing your IPL/SPL on a G4 Wizard.
Good Luck!!
that's what I figured.. I wasnt sure if it was safe to do... or easier to do with my CID unlocked..
This thread would be the perfect place to start.
HA! Thanks newbie.. I guess I will be leaving my IPL/SPL alone .. .. Maybe I will wait for cingular to make an update.. lol.
I have :
O2 XDA mini S G4 CID locked
IPL/SPL 3.08.0001;
Radio 2.69.11;
OS 10.2.0.8 WWE mUn_aRTM
Just flash this rom
http://forum.xda-developers.com/showthread.php?t=300628
With ftp://[email protected]/Prophet/Tools/ROMUpdateUtility-NoVendorID.zip
then you have German OS with IPL/SPL 3.08.0001. Radio 2.69.11
OS can you reflash later.
Question I have is.. What exactly does the IPL/SPL do? lol ..
apparently doesnt let you make calls. every time i try to dial a number, it says your international call cannot be completed as dialed... its useless, i just did it on my g3.
Madcap180 said:
Question I have is.. What exactly does the IPL/SPL do? lol ..
Click to expand...
Click to collapse
IPL and SPL are your bootloaders.
They initialize and load your OS and radio. different versions have different commands available to them and in some cases a higher number means a better version. In others the higher number means there are security "fixes" that will make it harder for you to flash your phone.
For a Wizard I have seen no reason to update higher than the T-Mobile 2.26. But then again you should only do this if you have a G3. Flashing G3 bootloaders into a G4 device will irrevocably brick it.
I believe (don't quote me on this though) that only official carrier roms (newer than the G4 device) contain both G3 and G4 bootloaders and as such are safe to flash to a G4 device. I would confirm this with your carrier before doing so though.
Hi
this method works perfectly
Now have a G4 CID locked update to IPL/SPL 3.08.0001
Thx
Just flash with Deutsch ROM to update IPL/SPL
& reflash to your favorite ROM
Borter said:
I have :
O2 XDA mini S G4 CID locked
IPL/SPL 3.08.0001;
Radio 2.69.11;
OS 10.2.0.8 WWE mUn_aRTM
Just flash this rom
http://forum.xda-developers.com/showthread.php?t=300628
With ftp://[email protected]/Prophet/Tools/ROMUpdateUtility-NoVendorID.zip
then you have German OS with IPL/SPL 3.08.0001. Radio 2.69.11
OS can you reflash later.
Click to expand...
Click to collapse
120.fr said:
Hi
this method works perfectly
Now have a G4 CID locked update to IPL/SPL 3.08.0001
Thx
Just flash with Deutsch ROM to update IPL/SPL
& reflash to your favorite ROM
Click to expand...
Click to collapse
Are you saying you upgraded you G4 CID locked phone using a ROM that isn't from your provider??
Please clarify this matter so that other users don't brick their phones!
mestrini said:
Are you saying you upgraded you G4 CID locked phone using a ROM that isn't from your provider??
Please clarify this matter so that other users don't brick their phones!
Click to expand...
Click to collapse
Yes I do.
I am a french guy, my provider is Ten Mobile.
I already have brick my Wizard before. Thanks to the guarantee, it was repaired.
Just replace Updater by ROMUpdateUtility-NoVendorID.
2 days of use nothing to announce.
Zzan said:
IPL and SPL are your bootloaders.
They initialize and load your OS and radio. different versions have different commands available to them and in some cases a higher number means a better version. In others the higher number means there are security "fixes" that will make it harder for you to flash your phone.
For a Wizard I have seen no reason to update higher than the T-Mobile 2.26. But then again you should only do this if you have a G3. Flashing G3 bootloaders into a G4 device will irrevocably brick it.
I believe (don't quote me on this though) that only official carrier roms (newer than the G4 device) contain both G3 and G4 bootloaders and as such are safe to flash to a G4 device. I would confirm this with your carrier before doing so though.
Click to expand...
Click to collapse
I have a G4 CID locked phone and IPL/SPL thats older than 2.26 and I see no reason to update them still, considering that I can upgrade everything else (OS, radio, ext rom, splash) without touching IPL/SPL. Of course, I am a little more cautious having bricked (yes, real "replacement required" type brick) my phone once.
120.fr said:
Yes I do.
I am a french guy, my provider is Ten Mobile.
I already have brick my Wizard before. Thanks to the guarantee, it was repaired.
Just replace Updater by ROMUpdateUtility-NoVendorID.
2 days of use nothing to announce.
Click to expand...
Click to collapse
It's been a long time since you did this. Is it still working for you?
Borter said:
I have :
O2 XDA mini S G4 CID locked
IPL/SPL 3.08.0001;
Radio 2.69.11;
OS 10.2.0.8 WWE mUn_aRTM
Just flash this rom http://forum.xda-developers.com/showthread.php?t=300628 With ftp://[email protected]/Prophet/Tools/ROMUpdateUtility-NoVendorID.zip
then you have German OS with IPL/SPL 3.08.0001. Radio 2.69.11
OS can you reflash later.
Click to expand...
Click to collapse
120.fr said:
Hi this method works perfectly
Now have a G4 CID locked update to IPL/SPL 3.08.0001
Thx
Just flash with Deutsch ROM to update IPL/SPL & reflash to your favorite ROM
Click to expand...
Click to collapse
mestrini said:
Are you saying you upgraded you G4 CID locked phone using a ROM that isn't from your provider??
Please clarify this matter so that other users don't brick their phones!
Click to expand...
Click to collapse
@mestrini I am guessing you did not try this route.
Borter said:
I have :
O2 XDA mini S G4 CID locked
IPL/SPL 3.08.0001;
Radio 2.69.11;
OS 10.2.0.8 WWE mUn_aRTM
Just flash this rom
http://forum.xda-developers.com/showthread.php?t=300628
With ftp://[email protected]/Prophet/Tools/ROMUpdateUtility-NoVendorID.zip
then you have German OS with IPL/SPL 3.08.0001. Radio 2.69.11
OS can you reflash later.
Click to expand...
Click to collapse
You flashed your O2 (G4 and CID locked device) with T-Mobiles ROM?! Sounds crazy to me... Are You sure that your device is CID locked at all? Even G4 device may be CID unlocked, using imei-check - only way this thing have some sense...
Can SPL 2.21.0001 downgrade to 1.06 and smaller?
Mr.Viet said:
Can SPL 2.21.0001 downgrade to 1.06 and smaller?
Click to expand...
Click to collapse
Only if your G4 Wizard is CID unlocked, but i guess it's not...
CyberianIce said:
You flashed your O2 (G4 and CID locked device) with T-Mobiles ROM?! Sounds crazy to me... Are You sure that your device is CID locked at all? Even G4 device may be CID unlocked, using imei-check - only way this thing have some sense...
Click to expand...
Click to collapse
why? even with NoID updater it's not possible to update a locked G4?
Hello,
I have got G4 Qtek S200 (HTC Prophet) CIDLOCKED
-----------------------
IPL : 2.20.0001
SPL: 2.20.0001
GSM: 02.47.21
OS: 2.20.7.34
-----------------------
My question very clear:
*** I want to downgrade IPL/SPL ***
Is this possible ?
Thanks advance..
Hello!
Read the Wiki:
It is not possible to upgrade from a G3 model to a G4 model through software, as the DOC is a piece of Hardware.
Click to expand...
Click to collapse
greetz Ben
Not from G3 to G4
Hello,
I guess you wrong understand me.
I dont want to upgrade my device from G3 model to G4.
Or i dont want to downgrade from G4 model to G3.
Already my device G4 and only i want to downgrade my IPL/SPL.
And i am asking how can i downgrade my IPL/SPL from 2.20.0001 to other minor IPL/SPL version.
Is this possible? What i must do?
Thanks...
It is not possible to upgrade from a G3 model to a G4 model through software, as the DOC is a piece of Hardware.
Click to expand...
Click to collapse
Its a piece of hardware, whatever the Gen you can't up or downgrade it! use your head and think about it!
loverbadi said:
Hello,
I guess you wrong understand me.
I dont want to upgrade my device from G3 model to G4.
Or i dont want to downgrade from G4 model to G3.
Already my device G4 and only i want to downgrade my IPL/SPL.
And i am asking how can i downgrade my IPL/SPL from 2.20.0001 to other minor IPL/SPL version.
Is this possible? What i must do?
Thanks...
Click to expand...
Click to collapse
I do think there's some people that don't understand english...
What loverbadi need to know concerns IPL/SPL versions, that are update by software.
What identifies G3 from G4 it's the last 4 digits (numbers) at the end of IPL/SPL version.
The first digits identifies the IPL/SPL version...
He needs to now how can he upgrade or downgrade this version, not to upgrade from a G3 device to G4...
Try to learn english language to read well what is write at this forum...
loverbadi said:
Hello,
I have got G4 Qtek S200 (HTC Prophet) CIDLOCKED
-----------------------
IPL : 2.20.0001
SPL: 2.20.0001
GSM: 02.47.21
OS: 2.20.7.34
-----------------------
My question very clear:
*** I want to downgrade IPL/SPL ***
Is this possible ?
Thanks advance..
Click to expand...
Click to collapse
yes it is possible,why do you want to downgrade them? 2.20 is the latest official version?
Hi guys
I thought i had a bricked Imate Jammin .. in bootloader mode ..so i used Qtec RUU to flash my phone ... and it started working ofcourse with lots of searching and help from this forum ....
Previously my phone IPL and SPL were 2.13 but after writting ROM phone works fine but IPL is still 2.13 and SPL 2.20 so i am really confused .. Also is it possible now to flash it with Imate Jammin software of the same version .. be it 2.13 or 2.20
If yes please guide me to the right software ,,, I am truly a noob
thanks
Mike
Lastest IPL/SPL is 2.58 ... you can found on a TC-500.
NOW it is possible to downgrade SPL. Just flash HardSPL, after that you can DOWNGRADE SPL to any SPL you want!!!
nForce said:
NOW it is possible to downgrade SPL. Just flash HardSPL, after that you can DOWNGRADE SPL to any SPL you want!!!
Click to expand...
Click to collapse
How? Can you explain a little bit more?
help
mun66 said:
Hi guys
I thought i had a bricked Imate Jammin .. in bootloader mode ..so i used Qtec RUU to flash my phone ... and it started working ofcourse with lots of searching and help from this forum ....
Previously my phone IPL and SPL were 2.13 but after writting ROM phone works fine but IPL is still 2.13 and SPL 2.20 so i am really confused .. Also is it possible now to flash it with Imate Jammin software of the same version .. be it 2.13 or 2.20
If yes please guide me to the right software ,,, I am truly a noob
thanks
Mike
Click to expand...
Click to collapse
my prophet is still dead
can you help me
my spl 2.20
my ipl 2.20.0001
usb connects but all rom that i tryed dont boot
please help on reviving this little device
thanks
my prophet is still dead
can you help me
my spl 2.20
my ipl 2.20.0001
usb connects but all rom that i tryed dont boot
please help on reviving this little device
thanks
tiago.ad.correia(at)gmail.com
flash with original provider rom if cid is locked !!!
then make hardspl.
br stupsi
Hello,
I've tried to install the latest TNT WM6 Rom without sucess. I managed to install the LOVE ROM after but I really would like to install WM6.
I have a QTEK 9100 CID and SIM unlocked and when I try to install the TNT ROM I get stuck at 99% of procedure and then get ERROR 302. Already tried with TNT ROM 19199 V1 and V2 and in 2 computers and get the same error. I changed the update utility too.
Does anyone have any ideas?
Regards,
Mauro
www.grupodualband.com
mauroantunes said:
Hello,
I've tried to install the latest TNT WM6 Rom without sucess. I managed to install the LOVE ROM after but I really would like to install WM6.
I have a QTEK 9100 CID and SIM unlocked and when I try to install the TNT ROM I get stuck at 99% of procedure and then get ERROR 302. Already tried with TNT ROM 19199 V1 and V2 and in 2 computers and get the same error. I changed the update utility too.
Does anyone have any ideas?
Regards,
Mauro
www.grupodualband.com
Click to expand...
Click to collapse
If you have a G3 device,it might not be CID unlocked,download WST 4.2.2 tool and run the 'CID Action' button to verify the CID lock/unlocked status,but if its a G4,it cannot be CID unlocked,however,it can be upgraded to wm6 through methods called 'SoftSPL' and 'HardSPL',you can read about them in this G4 forum as 'Stickies'.
Btw,what is the IPL/SPL of your phone ?
WM6.1
Hello,
My QTEK is a G4 and I tought CID unlocked meant that the phone was free for all networks since I bought mine free of operator.
My IPL/SPL is 2.18.0001
Regards,
Mauro
www.grupodualband.com
mauroantunes said:
Hello,
My QTEK is a G4 and I tought CID unlocked meant that the phone was free for all networks since I bought mine free of operator.
My IPL/SPL is 2.18.0001
Regards,
Mauro
www.grupodualband.com
Click to expand...
Click to collapse
Its surely is a G4 device with ipl/spl 2.18.0001. All network unlock means its only SIM unlocked,but CID unlock means you can upgrade to any wm6 Rom.SIM unlock and CID unlock are both different things,a G4 phone cannot be CID unlocked,however it can be upgrade with either 'SoftSPL' or 'HardSPL' .
mauroantunes said:
Hello,
My QTEK is a G4 and I tought CID unlocked meant that the phone was free for all networks since I bought mine free of operator.
My IPL/SPL is 2.18.0001
Regards,
Mauro
www.grupodualband.com
Click to expand...
Click to collapse
Its surely is a G4 device with ipl/spl 2.18.0001. All network unlock means its only SIM unlocked,but CID unlock means you can upgrade to any wm6 Rom.SIM unlock and CID unlock are both different things,a G4 phone cannot be CID unlocked,however it can be upgraded with either 'SoftSPL' or 'HardSPL' .
Thank you
Hello,
THank you for your help. It solved the issue by using the SoftSPL. I already installed the SNN V3 Rom and it is working fine but I would like to use the HTC Cube, where can I get a compatible one?
Regards,
Mauro
WWW.GRUPODUALBAND.COM
Hello! I have a Qtek 9100 and I've managed to update to WM6.1 and now I'd prefer WM 5 witch I like more and I didn't managed to downgrade maybe someone can explain as simple as possible ... i think my phone is G4
IPL: 2.21.0001
SPL: 2.21.0lip
malexino said:
Hello! I have a Qtek 9100 and I've managed to update to WM6.1 and now I'd prefer WM 5 witch I like more and I didn't managed to downgrade maybe someone can explain as simple as possible ... i think my phone is G4
IPL: 2.21.0001
SPL: 2.21.0lip
Click to expand...
Click to collapse
First you need to remove 'HardSPL',revert back to official carrier's IPL/SPL and then flash back the official carrier's rom,follow the link below for complete guidance:-
http://forum.xda-developers.com/showthread.php?t=342744
Thanks
Thank you! I managed to downgrade ...
Wizard G4/Qtek 9100 English rom need urgent!!!
Here you go,official Qtek 9100 wwe Rom:-
http://s131209249.online.de/vodafone_software/9100.htm
Hello zabardast_1,
my phone is CID SIM locked and has no sound...
If I flash him with new ROM should the issue be fixed or on-sound is a hardware question?
Please advice,
Thank you....
Mitko
First you need to CID/SIM unlock it. Than you need to flash new rom image. Mislam deka me razbra
Borce thanks,
I have made Hard SPL on my device...
I need to make Soft SPL but I cannot find the nk.nbf file...
Can you help me somehow?
Where is that file placed or how can I generate the file?
Fala ti za odgovorot ti pisav na angliski cisto od kultura ako na nekoj mu treba informacija da mozi da ja procita ))
Pozdrav i fala uste ednas
mitko_bt said:
Borce thanks,
I have made Hard SPL on my device...
I need to make Soft SPL but I cannot find the nk.nbf file...
Can you help me somehow?
Where is that file placed or how can I generate the file?
Fala ti za odgovorot ti pisav na angliski cisto od kultura ako na nekoj mu treba informacija da mozi da ja procita ))
Pozdrav i fala uste ednas
Click to expand...
Click to collapse
If your phone is already HardSPL,there's no need to use SofSPL.simply download and flash any latest rom to upgrade,like you flash any official stock rom.
Btw,why you want to get it SoftSPL?
Because I cannot upgrade my ROM.
Below is the info form my device:
=> Bootloaders:
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
I downloaded the latest ROM form at T-Mobile and I'm receiving all kind of error messages : error 238 error 300.....etc
I bought the device with 2.26.10.105.
Please advice with version of ROM is the Latest.... Or why I cannot flash a new ROM
Thanks
Mitko
mitko_bt said:
Because I cannot upgrade my ROM.
Below is the info form my device:
=> Bootloaders:
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
I downloaded the latest ROM form at T-Mobile and I'm receiving all kind of error messages : error 238 error 300.....etc
I bought the device with 2.26.10.105.
Please advice with version of ROM is the Latest.... Or why I cannot flash a new ROM
Thanks
Mitko
Click to expand...
Click to collapse
OMG, Are you gone out of your mind,your phone is HardSPL and you are trying to flash an official T-mobile rom containing IPL/SPL in it ? its committing suicide !!!
Don't you know,its fatal flashing a rom with IPL/SPL to a device with HardSPL Bootloaders will 'Brick' the phone.
Well,if it still gets into Boot;oaders,then consider yourself as one of the luckiest human beings,as its still alive and not bricked.
While HardSPL,you can only flash custom build roms,but if you want to revert back to your official stock rom,then first remove HardSPL flash back to original official Bootloaders (IPL/SPL) and then flash the stock rom.
Or, yes you can flash the official rom through SoftSPL but first you'll have to extract the official rom,extract/remove the IPL/SPL out of it,repack the rom and then flash the nk.nbf only through SoftSPL.
BTW, 2.26.10.105. are not G4 Bootloaders,re affirm it,you might be mistaken.
zabardast_1 said:
If your phone is already HardSPL,there's no need to use SofSPL.simply download and flash any latest rom to upgrade,like you flash any official stock rom.
Btw,why you want to get it SoftSPL?
Click to expand...
Click to collapse
Please guide me thru next step. Because i forgot to backup my old rom. Thanks in advance.
avonero said:
Please guide me thru next step. Because i forgot to backup my old rom. Thanks in advance.
Click to expand...
Click to collapse
learn and follow the tutorial at http://forum.xda-developers.com/showthread.php?t=298613&highlight=button+rom
I'd also HardSpl my Qtek 9100
now have
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
but my CID still shows LOCKED!
I'm afraid not to Brick it please kindly help me in next thing to do and what type os Windows ROM version to use.
thanks in Advance.
avonero said:
I'd also HardSpl my Qtek 9100
now have
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
but my CID still shows LOCKED!
I'm afraid not to Brick it please kindly help me in next thing to do and what type os Windows ROM version to use.
thanks in Advance.
Click to expand...
Click to collapse
used WST_4.2.2 unlocked your CID