Htc P3400i stubbornly stuck on tricolour bootloader screen - P3400 ROM Development

Hi all experts,
I recently bought an Htc P3400i. Tried to uprade to WM6.1.
This is what i did...
1) Downloaded geneWM6.1...rar from this forum
2) copied the file genehspl.exe to root of my device
3) and my device screen went blank
4) After searching through the forum, i got to know that pressing and holding the camera button and resetting brings up the bootloader screen.
5) Thats it, i am stuck there...
What i tried...
1) I've searched through the forum and tries to solve the issue. Firstly, i tried using many roms, but it all ends up in error 300(invalid update utility)
2) I aslo tried mtty.
this is what i got...
Cmd>password BsaD5SeoA
BML_Open errornErr=0x800A0000)
BML_Open errornErr=0x800A0000)
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
BML_Open errornErr=0x800A0000)
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = 0
Type (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
RUURUN fail
HTCSF

---

BML_open error
hi muneer,
don't panic. getting stuck at the tricolour screen is a common problem.
as for the bml_open error, have u disabled the active sync "allow usb " option?

---

thanks for the reply
hi, i followed the instructions, and disabled that option before using mtty.
it doesn't work. there must be some solution to it. especially the BML_open error.

---

Hi Mun ,
Did u get the solution for the problem as i am facing the same issue now .
thanks

---

Read Sticky
Firstly, when you upgrade your device you must be aware of the gene you are using. Is it new gene or old gene?????
Secondly, after knowing your gene you have to Hard SPL your device according to your device. It's kind of unlocking so that you can install third party (non official) ROM.
Then you should be aware of how the procedure to be followed to upgrade your device.
So, stop wasting threads and start reading sticky posts. Many people don't read stick and as a result they brick their device.
Read before you post, there are some members who have upgraded their device successfully with no problems at all and have read sticky post atleast 20 times before upgrading.
So please read sticky to get solution and post your queries in appropriate threads or in GENE question and answer.

---

Here is the fool proof solution
:start
1. Read the sticky threads
2. Again read the sticky threads.
3. Once again read the sticky thread.
4. Read the sticky thread once more.
5. Read the sticky thread last time, and
6. Start from 1st line again or u can say go to "start"
i m damn sure that this will help u in unbricking the device...
Thread reported for closure....

---

vaibhav_batra_the_techguy said:
:start
1. Read the sticky threads
2. Again read the sticky threads.
3. Once again read the sticky thread.
4. Read the sticky thread once more.
5. Read the sticky thread last time, and
6. Start from 1st line again or u can say go to "start"
i m damn sure that this will help u in unbricking the device...
Thread reported for closure....
Click to expand...
Click to collapse
aaaawe come on techguy...give the folks a lil spoon feeding. just this one time...do it for ya boy ramon after all...being stuck in boot loader causes panic where im from lol...and i dont read too straight then i am in panic!