I had problem with SD card and i thought if i use different rom it will solve it
i have made the upgrade to to WM 6.1 VanillaManila v2.0 Ultimate & v1.0 For New Gene
After finishing flashing the rom it restart alone and stuck on the windows mobile 6.1 boot screen
I made hard rest and the problem persists.
And the sd card not work
Now when it boots appears
ONBL 1.10.0000
SPL 1.10.0000
GSM 08.79.90
OS 1.17.0.0
Smart mobility
And my htc s/n:Ht807******
And I use Orefkov
mtty1_42
but gives me that massage and not make the screen white
Cmd>ls boot.bin
clean up the image temp buffer at 0x8C100000 Length 0x03A00000
BOOTLOAD_PAGE_TABLE_BASE_C_VIRTUAL= 0x8C080000
Clear image temp buffer done .
MTTYDownloadImage
Not allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
I don’t know what to do
Please help me
smb_do said:
I had problem with SD card and i thought if i use different rom it will solve it
i have made the upgrade to to WM 6.1 VanillaManila v2.0 Ultimate & v1.0 For New Gene
After finishing flashing the rom it restart alone and stuck on the windows mobile 6.1 boot screen
I made hard rest and the problem persists.
And the sd card not work
Now when it boots appears
ONBL 1.10.0000
SPL 1.10.0000
GSM 08.79.90
OS 1.17.0.0
Smart mobility
And my htc s/n:Ht807******
And I use Orefkov
mtty1_42
but gives me that massage and not make the screen white
Cmd>ls boot.bin
clean up the image temp buffer at 0x8C100000 Length 0x03A00000
BOOTLOAD_PAGE_TABLE_BASE_C_VIRTUAL= 0x8C080000
Clear image temp buffer done .
MTTYDownloadImage
Not allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
I don’t know what to do
Please help me
Click to expand...
Click to collapse
bro try this again and jus bfore this wen u connect ur fone to ur pc kill the WCESCOMM.exe by holding ctrl+alt+del
wen u type ls boot.bin(remember its small L not I) hold ur camera button bfore hitting ENTER on ur PC and keep the camera button pressed till u get a white screen
hope this will work for you
set 32 1
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SD clock to 24MHz
***** user area size = 0x79000000 Bytes
SDInit---
SDInit OK
g_cKeyCardSecurityLevel = FF
Cmd>ls boot.bin
clean up the image temp buffer at 0x8C100000 Length 0x03A00000
BOOTLOAD_PAGE_TABLE_BASE_C_VIRTUAL= 0x8C080000
Clear image temp buffer done .
MTTYDownloadImage
Not allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
Cmd>
i do eveything right but i dont know why it is become not allow operation
please help me
press and hold camera button before pressing enter in ls boot.bin command and release it after the command is completed
g_cKeyCardSecurityLevel = FF
Click to expand...
Click to collapse
This is your problem, the value should be 00. Your phone is CID Locked so it is not allowing the custom SPL to be patched. The only way to solve your problem is to get the original WM 6 or 5 whatever ROM came on your phone and flash it. This CID lock will only allow official ROMs to be flashed. After you get your phone working, first patch your SPL and then try upgrading your phone to any custom ROM from here. And also, please try to read the tutorials to flashing etc that are sticky posts in this forum before doing these dangerous things to your phone.
WARNING: If your phone came with WM 6 original, find the original ROM and flash it. But if it came with WM 5, you better give it to service center for flashing. Most WM 5 Roms available on forum cause phones to become dead. So flash WM 5 rom if and only if you are certain that its the original one for your particular phone.
Think you very much for your explanation
I tried to make the secreen white to flash the rom but it wont be
my phone problem from begging is the SD card not working however how i can found wm5 original rom
That, my friend, i really dont know. Ask Ramerson, he may be able to give you one or may be able to provide you with information on whom to contact. And please, ASK Specifically for a official ROM as you cannot flash custom roms in your current situation.
Related
Hi
I have here a G4 with the stock OS/rom that really interests me. Its the vodafone PTG rom wich i need to flash on another g4 i have that is in english.
The question is : how can i do a rom from that wizard ?
Thanks !
PS. of course i can upload the rom for anyone who needs if after
First you must know if the phone is CID unlocked
If it is then just get "mtty" and make a "r2sd all"
If it's not then i think you must do it by steps using programs like awizard
cheers
PS:
anyone feel free to correct please
i dont think its cid unlocked, almost for sure that is locked
I Cant Make Full Backup, Need Help (g4) Cingular 8125 Sim & Cid Unlocked
I have tryied everything nothing had worked I'm able to Backup OS & Extended Rom. Not a nubby even doing sd backup happens same thing I can make individual backup like IPL, SPL, Extended Rom, OS ect. But I want full backup and I cant. When I use aWizard it does great job but on the radio.nba part this is the message that comes out. I have tryied everithing all the programs availables on all forum this has been a 8 day proyect please some one can help me. HELP HELP HELP HELP HELP HELP HELP HELP HELP. ITS A CINGULAR 8125 (G4) UNLOCKED SIM & CID BY CHECK-IMEI. PLEASE SOMEBODY ANY ADVISE.
THIS IS DOING IT WITH SD
r2sd all
R2SDBackup() Pls. insert SD card !!
Cmd>r2sd all
***** user area size = 0x3B880000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
Start address = 0x80000000 , Length = 0x800
Start address = 0x80000800 , Length = 0xC0000
Start address = 0x800C0800 , Length = 0x40000
Start address = 0x80100800 , Length = 0x280000
GSM - dwSize = 345DF
GSM Page0
Start address = 0x4E3D4C0 , Length = 0x3900000
Start address = 0x743D4C0 , Length = 0xA00000
The read size is not matched, load failed!
Some Image (8) load failed, we can not backup All images...
Cmd>
============== aWizard 1.3 beta 2 ===============
- By ahlok_hk -
__________________________________________
- [Credits] -
- itsme for 'itsutils' -
- MachinaGod for 'RapiUnlocker' -
- MachinaGod for 'lokiwiz' -
- mamaich for 'WM5 ROM editing tool' -
- psneddon and kenu for Logo Converter -
- nicob for scripting tips -
- xda-developers.com, buzzdev.net n oths -
__________________________________________
* Please Choose one of the following options:
a - View README file
e - Enable RAPI (Run this after each hard reset)
u - Unlock CID (!!!PLEASE RUN THIS ONE TIME FIRST!!!)
b - Backup Radio, OS and Extended ROM from device
s - Write Backup Splash Logo (.nba) to Wizard
c - Convert + write BMP(240x320) Splash Logo to Wizard
r - Write Radio ROM to device (!! RUN unlock CID 1st !!)
w - Write OS ROM to device (!! RUN unlock CID 1st !!)
q - Quit this program
__________________________________________
!!! ATTENTION! Please use this tool at your own risk!!!
__________________________________________
* Type letter then press [Enter]:B
* Backup Wizard ROM Version 1.0
* Please enter the name of "folder" to save the ROM image to (e.g. "QT-1_6_3_4-W
WE"), no space pls
* Then press [Enter], or q to to main menu:radio
* Backup Radio ROM? (y/n/q):Y
* Backup OS ROM? (y/n/q):N
* Backup Extended ROM? (y/n/q):N
* Backup Splash ROM and HTC Logo? (y/n/q):N
* Please make sure the following before running this option:
* - your have connected your Wizard to the PC with USB ActiveSync connection,
* - already run the option 'e' at least once after the last time you hard reset
the Wizard
* then press [Enter] to start, or q to main menu:
[14:29:32.28] Backup Radio ROM [ROM\radio\radio-Radio.nba] Start
* This process takes about 5 to 8 minutes depends on CPU Speed.
* Please wait.....
3 partitions, 2 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 39 07 01 06 27 2c 17 3e 17 05 06 ec
CopyTFFSToFile(0x50000, 0x280000, ROM\radio\radio-Radio.nba)
ERROR: ITReadDisk: outbuf==NULL
[14:30:18.59] Backup Radio ROM [ROM\radio\radio-Radio.nba] End
Press any key to continue . . .
rebeldishman: dude--This is the 3rd post of this information (at least) from you. Post it once and be patient. By the way, it has been answered already in the other forum.)
--sigh.
Hi All
I received HTC P3400 which is stuck on boot mode showing red/green/blue colours. Can somebody here please post the solution.
BR
Somebody here please post solution here.
Sachin Deora
Sachin did u tried to soft-reset the device ?
Also post details of what you were doing when it got stuck.
I have tried Soft Reset & Hard Reset both,but didnt worked.
I have received the phone from customer who says that the hadset hung on its own.
Pls reply
BR
supremegsm said:
Hi All
I received HTC P3400 which is stuck on boot mode showing red/green/blue colours. Can somebody here please post the solution.
BR
Click to expand...
Click to collapse
1. Kill ActiveSync process - wcescom.exe on your computer.
2. Attach USB-cable to device.
3. Run programm from attach, select "\\.\WCEUSBSH001" from port's list and click Ok.
4. Type (type himself, not copy/paste) in window:
password BsaD5SeoA(press Enter)
ruurun 0(press Enter)
ResetDevice(press Enter)
just flash the original rom
my gene also got stuck after upgradation(pls help me)
it's done after reading properly -how to flash rom..tnx
help me
pls tell the exact process....i cant find attach file and all...wer is this attach??
ple tell
wat u mean by kill activesync
There is only one fix.... that is hard reset the device without even powering it on .....and please search the forum completely... i have also posted a video on YOUTUBE about this ...!
let me know how it goes.....
http://forum.xda-developers.com/showthread.php?t=375064
orefkov said:
1. Kill ActiveSync process - wcescom.exe on your computer.
2. Attach USB-cable to device.
3. Run programm from attach, select "\\.\WCEUSBSH001" from port's list and click Ok.
4. Type (type himself, not copy/paste) in window:
password BsaD5SeoA(press Enter)
ruurun 0(press Enter)
ResetDevice(press Enter)
Click to expand...
Click to collapse
Hope long back when i had an issue you gave me the same suggetion ... But this is very complicated and does nont work every time......
The answer is this http://forum.xda-developers.com/showthread.php?t=375064
Htc P3400i stubbornly stuck on tricolour bootloader screen
Hi all experts,
I recently bought an Htc P3400i. Tried to uprade to WM6.1.
This is what i did...
1) Downloaded geneWM6.1...rar from this forum
2) copied the file genehspl.exe to root of my device
3) and my device screen went blank
4) After searching through the forum, i got to know that pressing and holding the camera button and resetting brings up the bootloader screen.
5) Thats it, i am stuck there...
What i tried...
1) I've searched through the forum and tries to solve the issue. Firstly, i tried using many roms, but it all ends up in error 300(invalid update utility)
2) I aslo tried mtty.
this is what i got...
Cmd>password BsaD5SeoA
BML_Open errornErr=0x800A0000)
BML_Open errornErr=0x800A0000)
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
BML_Open errornErr=0x800A0000)
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = 0
Type (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
RUURUN fail
HTCSF
muneersn said:
Hi all experts,
I recently bought an Htc P3400i. Tried to uprade to WM6.1.
This is what i did...
1) Downloaded geneWM6.1...rar from this forum
2) copied the file genehspl.exe to root of my device
3) and my device screen went blank
4) After searching through the forum, i got to know that pressing and holding the camera button and resetting brings up the bootloader screen.
5) Thats it, i am stuck there...
What i tried...
1) I've searched through the forum and tries to solve the issue. Firstly, i tried using many roms, but it all ends up in error 300(invalid update utility)
2) I aslo tried mtty.
this is what i got...
Cmd>password BsaD5SeoA
BML_Open errornErr=0x800A0000)
BML_Open errornErr=0x800A0000)
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
BML_Open errornErr=0x800A0000)
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = 0
Type (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
RUURUN fail
HTCSF
Click to expand...
Click to collapse
at same level since 10 days
after this prosses give
orefkov said:
1. Kill ActiveSync process - wcescom.exe on your computer.
2. Attach USB-cable to device.
3. Run programm from attach, select "\\.\WCEUSBSH001" from port's list and click Ok.
4. Type (type himself, not copy/paste) in window:
password BsaD5SeoA(press Enter)
ruurun 0(press Enter)
ResetDevice(press Enter)
Click to expand...
Click to collapse
after this proses give RUURUN fail
what can in do
plz help me
I have the exact problem.
any news about solution?
I'm unable of doing hard reset and I can only see tricolor screen with the following information:
ONBL 1.10.0000
SPL 1.10.Olip
Hey guys,
i have a p3400 wid WM5.
upgraded it to WM 6. worked quite well for about 2 months after upgrading to WM6 but now stuck on bootloader screen (red, blue, green).
nothin seems to be workin.
tried everythin, including powercycle, hard reset, soft reset, flashing original rom and everythin. well nothing worked. after 10 days it jus starte again for like 10 mins and now it is back to wht it was.
somebody plsssssss helpppppp.
bryangopan said:
There is only one fix.... that is hard reset the device without even powering it on .....and please search the forum completely... i have also posted a video on YOUTUBE about this ...!
let me know how it goes.....
http://forum.xda-developers.com/showthread.php?t=375064
Click to expand...
Click to collapse
muneersn
try to flash it with original stock ROM and get it repaired under warranty thats what i did.....
I have tried the procedure, but even then I am facing the same problem. whrn I reset the device the boot mode do not appear, only black screen. but if I press the Camera button 7 reset the device then the boot mode appears. please help to make my device run. [email protected]
sriyankar said:
I have tried the procedure, but even then I am facing the same problem. whrn I reset the device the boot mode do not appear, only black screen. but if I press the Camera button 7 reset the device then the boot mode appears. please help to make my device run. [email protected]
Click to expand...
Click to collapse
Try power button+camera button together from tri color screen it enables the USB support where u can update original rom
orefkov said:
1. Kill ActiveSync process - wcescom.exe on your computer.
2. Attach USB-cable to device.
3. Run programm from attach, select "\\.\WCEUSBSH001" from port's list and click Ok.
4. Type (type himself, not copy/paste) in window:
password BsaD5SeoA(press Enter)
ruurun 0(press Enter)
ResetDevice(press Enter)
Click to expand...
Click to collapse
i use that instruction and than what i do ??????????
Hi all experts,
I recently bought an Htc P3400i. Tried to uprade to WM6.1.
This is what i did...
1) Downloaded geneWM6.1...rar from this forum
2) copied the file genehspl.exe to root of my device
3) and my device screen went blank
4) After searching through the forum, i got to know that pressing and holding the camera button and resetting brings up the bootloader screen.
5) Thats it, i am stuck there...
What i tried...
1) I've searched through the forum and tries to solve the issue. Firstly, i tried using many roms, but it all ends up in error 300(invalid update utility)
2) I aslo tried mtty.
this is what i got...
Cmd>password BsaD5SeoA
BML_Open errornErr=0x800A0000)
BML_Open errornErr=0x800A0000)
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
BML_Open errornErr=0x800A0000)
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = 0
Type (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
RUURUN fail
HTCSF
BML_open error
hi muneer,
don't panic. getting stuck at the tricolour screen is a common problem.
as for the bml_open error, have u disabled the active sync "allow usb " option?
thanks for the reply
hi, i followed the instructions, and disabled that option before using mtty.
it doesn't work. there must be some solution to it. especially the BML_open error.
Hi Mun ,
Did u get the solution for the problem as i am facing the same issue now .
thanks
Read Sticky
Firstly, when you upgrade your device you must be aware of the gene you are using. Is it new gene or old gene?????
Secondly, after knowing your gene you have to Hard SPL your device according to your device. It's kind of unlocking so that you can install third party (non official) ROM.
Then you should be aware of how the procedure to be followed to upgrade your device.
So, stop wasting threads and start reading sticky posts. Many people don't read stick and as a result they brick their device.
Read before you post, there are some members who have upgraded their device successfully with no problems at all and have read sticky post atleast 20 times before upgrading.
So please read sticky to get solution and post your queries in appropriate threads or in GENE question and answer.
Here is the fool proof solution
:start
1. Read the sticky threads
2. Again read the sticky threads.
3. Once again read the sticky thread.
4. Read the sticky thread once more.
5. Read the sticky thread last time, and
6. Start from 1st line again or u can say go to "start"
i m damn sure that this will help u in unbricking the device...
Thread reported for closure....
vaibhav_batra_the_techguy said:
:start
1. Read the sticky threads
2. Again read the sticky threads.
3. Once again read the sticky thread.
4. Read the sticky thread once more.
5. Read the sticky thread last time, and
6. Start from 1st line again or u can say go to "start"
i m damn sure that this will help u in unbricking the device...
Thread reported for closure....
Click to expand...
Click to collapse
aaaawe come on techguy...give the folks a lil spoon feeding. just this one time...do it for ya boy ramon after all...being stuck in boot loader causes panic where im from lol...and i dont read too straight then i am in panic!
I Have a Htc p3400 OLD GENE
I flash it before 3 time and it was good
but the last weak I flash it with New Gene Rom by wrong i don't know what can i do i try to flash it from the bootloader it goes to 2% and the Device restart
the service center in Egypt don't support flash the rom they wanna replace the mainboard which is cost me the original device Price
what can i do plz Hel me
It try the Mtty Program and he give me that
set 32 1
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = FF
it seems that ur spl is locked again !
what ur device show at boot loader ???
onbl ??
spl ??
radio ??
os ??
if u have just flashed a new rom then goto boot loader and flash any old gene rom.
thnx for reply
My device Serial Start with : Ht810
GENE 100
onbl 1.10.0000
spl 1.10.0000
GSM 02.79.90
OS 1.17.0.0
I Try to flash another Rom it goes to 2% and stop (Update Error)
i try to Do flash from SD card But (Invalid certificate)
walid_100 said:
My device Serial Start with : Ht810
GENE 100
onbl 1.10.0000
spl 1.10.0000
GSM 02.79.90
OS 1.17.0.0
I Try to flash another Rom it goes to 2% and stop (Update Error)
i try to Do flash from SD card But (Invalid certificate)
Click to expand...
Click to collapse
it seems u have a locked spl now so first thing u have to unlock ur spl
gene unbricker not working because it is only for new gene (old gene don't boot from that)
try this
http://forum.xda-developers.com/showpost.php?p=4070793&postcount=18
It Dosen't Work with me I Try it but IT goes to 100% and the Phone turnoff (Update Error)
Any Else Methods From the Bootloader ?
walid_100 said:
It Dosen't Work with me I Try it but IT goes to 100% and the Phone turnoff (Update Error)
Any Else Methods From the Bootloader ?
Click to expand...
Click to collapse
then i think u have 2 options
1 goto service center .(easy)
2 try j-tag method (not easy).
if u wanna try i m attaching jtag method first read the readme file in the zip then think u can do or not.
http://rapidshare.com/files/326486053/gene_jtag_restore_revised.zip.html
walid_100......listen h-jtag is so easy methos......don't worry abt it.....it will definately help u to recover ur gene.....i also recovered my gene with h-jtag......
My HTC P3400 is dead. S/N starts with SZ7*****. I can do bootloader mode n tricolor appears on phone n it shows ONBL. 1.10.0000, SPL. 1.10.000 then freezes. When I connect with USB the symbol also shows. I read many threads n gone through the Rom upgrading guide and did all the possibilities, ie. In the Orefkov method, I typed in mitty window "set 32 1" then press enter, then it shown:
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = FF
Cmd>
Then I typed the command “ls boot.bin” and hold the camera button and press enter. Then the following msg has come
Cmd>ls boot.bin
clean up the image temp buffer at 0x8C100000 Length 0x03A00000
BOOTLOAD_PAGE_TABLE_BASE_C_VIRTUAL= 0x8C080000
Clear image temp buffer done .
MTTYDownloadImage
Not allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
Cmd>
Nothing was happened on the phone. The tricolour still appears.
I run ROM Update Utility (3.12.3.5) and the image version showing blank and after updating it is showing 1.00.000.0. When press the Next button, a progress bar appearing on the phone. After 2% progress, the phone turned off completely. Also the following message appearing on the PC: ERROR [270]: UPDATE ERROR. The image file is corrupted. Please check your Update Utility.
I did both soft n hard reset but nothing happening.
Any chance to recover my HTC? .... Please help
epsnarayanan said:
My HTC P3400 is dead. S/N starts with SZ7*****. I can do bootloader mode n tricolor appears on phone n it shows ONBL. 1.10.0000, SPL. 1.10.000 then freezes. When I connect with USB the symbol also shows. I read many threads n gone through the Rom upgrading guide and did all the possibilities, ie. In the Orefkov method, I typed in mitty window "set 32 1" then press enter, then it shown:
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = FF
Cmd>
Then I typed the command “ls boot.bin” and hold the camera button and press enter. Then the following msg has come
Cmd>ls boot.bin
clean up the image temp buffer at 0x8C100000 Length 0x03A00000
BOOTLOAD_PAGE_TABLE_BASE_C_VIRTUAL= 0x8C080000
Clear image temp buffer done .
MTTYDownloadImage
Not allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
Cmd>
Nothing was happened on the phone. The tricolour still appears.
I run ROM Update Utility (3.12.3.5) and the image version showing blank and after updating it is showing 1.00.000.0. When press the Next button, a progress bar appearing on the phone. After 2% progress, the phone turned off completely. Also the following message appearing on the PC: ERROR [270]: UPDATE ERROR. The image file is corrupted. Please check your Update Utility.
I did both soft n hard reset but nothing happening.
Any chance to recover my HTC? .... Please help
Click to expand...
Click to collapse
please help me too
mulcomse7en said:
please help me too
Click to expand...
Click to collapse
sure possible!!!
connect me via gtalk.....
Its not that phone is dead...
Please use paper or something for battery. one of the pin is unable to touch power line.
I had similar problem when i owned phone.
Do it and make sure..
If it doesnt help then try to flash everything again.... instructions in noobs guide
g_cKeyCardSecurityLevel = FF means your phone is locked......spl is not unlocked......how can u update roms b4 unlocking spl.....now u can go for J-tag only.....its the only way to get back your gene......!