I don't have too much time, so i do now only short description
-Language: Polish (first), English (secondary)
-Graphics from Dr. Martin Gonzo rom
-Moblue
-Jbed
-Skinz Sudoku (game)
-Resco explorer
-CeleTask
-add iconbar
-CommManager
-Reset function
DOWNLOAD
Latest SPL and some stuff needed to upgrade rom
This SPL is same as this for WM6 (patched_ruu.exe for upgrade)
SPL & STUFF
Thanks for this great rom.
It looks great.
At last the screen comes on when I set an MP3 for the ringtone!!!
Great work.
Thanks for the ROM. Finally one without any Chinese stuff in it.
Just 2 more questions: does this ROM support use of SDHC cards and how to change the date style (from short to long date format)
1 - this and all other rom's dosn't support sdhc card's
2 - need to change it in registry editor
Thanks for the quick reply. Re the reg editor: do you know what key needs to be changed (and to what value)?
Can you please give a step to step guide, for how to install this rom on the SPV C550 please?
to kuljit55:
now i don't have to much time to do tutorial about it, but in free time i try to describe "what and how"
what Windows now you have?
to wirelezzwizzerd:
find....
[HKEY_LOCAL_MACHINE\nls\overrides]
and change...
"SSDte"="dd/MM/yyyy"
to...
"SSDte"="dddd, dd-MMM-yyyy"
Great rom,thx lazaj. I have problem with configure mms setting(apn)
SMS Problem
Hi. I flashed
Found the following two problems so far
I found SMS come in... but none will send,...
T9 Eglish is not correct.
Any fixes?
harvsingh said:
Hi. I flashed
Found the following two problems so far
I found SMS come in... but none will send,...
Click to expand...
Click to collapse
SMS center is correctly set?!
Not yet tested, but in older versions:
Edit number at Start/Settings/Phone/CallOptions/TextMessageServiceCenter.
what's wrong with t9?
lazaj007 said:
to kuljit55:
now i don't have to much time to do tutorial about it, but in free time i try to describe "what and how"
what Windows now you have?
to wirelezzwizzerd:
find....
[HKEY_LOCAL_MACHINE\nls\overrides]
and change...
"SSDte"="dd/MM/yyyy"
to...
"SSDte"="dddd, dd-MMM-yyyy"
Click to expand...
Click to collapse
I tried it, changed the value to "dddd d MMMM yyyy" but then the date field in the first panel showed up empty (unfortunately)
Thanks for the Firmware, works and looks nice!
A few small problems I found:
MoBlue is only in Polish.
Some error messages (as from media player) are also only Polish.
Is there a way to fix this?
moblue is in english too, but you must change them i moblue settings or in registry editor.
about WMP i check it
lazaj007 said:
moblue is in english too, but you must change them i moblue settings or in registry editor.
Click to expand...
Click to collapse
Works! Thanks.
Changed in registry: moblue.pl.lang.txt -> moblue.lang.txt
Do we have to flash some specificradio for WM6.1? This is the best rom so far, but i still have most common problems that occur with 6.1: phone keeps losing coverage and battery sometimes drains for no apparent reason.
SMS and T9
someone_01 said:
SMS center is correctly set?!
Not yet tested, but in older versions:
Edit number at Start/Settings/Phone/CallOptions/TextMessageServiceCenter.
Click to expand...
Click to collapse
Hi.
Yes I know where the settings are.. but when i enter a number. ...
+447973100973 (orange UK)
and press done.
go back in.. and its missing again.
as for the T9... predictive text comes up with some real weird and wonderful words along with pl characters
try typing "tomorrow" "monday" "tuesday" etc etc
Is there a diff t9 english i can use? how do you set it?
harvsingh said:
+447973100973 (orange UK)
and press done.
go back in.. and its missing again.
Is there a diff t9 english i can use? how do you set it?
Click to expand...
Click to collapse
For T9 try a download from hxxp://melgurth.ovh.org/index.php?page=downloads
The setting of SMS service center works fine for me
When I clear the entry, it was auto filled by the network,
when I modifiy the default, it stays as I enter the value.
harvsingh said:
Hi.
Yes I know where the settings are.. but when i enter a number. ...
+447973100973 (orange UK)
and press done.
go back in.. and its missing again.
as for the T9... predictive text comes up with some real weird and wonderful words along with pl characters
try typing "tomorrow" "monday" "tuesday" etc etc
Is there a diff t9 english i can use? how do you set it?
Click to expand...
Click to collapse
Thanks for the T9 link.
I will drive it and see what happens..
Howver... I have found.... Putting in a normal one line sim card.. (t-mobile) it works fine..and shows and saves the SMSC
A sim with Line 1 and Line 2 (ALS) not cut chopped card... before someone says it) Orange ...does not work.
What i need is where it stores this info.
Searching the Registy shows up nothing.
Can someone point me in the right direction?
Thanks
cont....
Thanks for the T9 link.
I will drive it and see what happens..
Howver... I have found.... Putting in a normal one line sim card.. (t-mobile) it works fine..and shows and saves the SMSC
A sim with Line 1 and Line 2 (ALS) not cut chopped card... before someone says it) Orange ...does not work.
What i need is where it stores this info.
Searching the Registy shows up nothing.
Can someone point me in the right direction?
FYI.. the other wm6.1 for the hurricane with bt and ir fixed..(chinese and english) picks up the smsc perfectly.
Is there a different file i could replace???
Thanks
Related
Did you already try to make a phonecall with your XDA or MDA in your car? Then you certainly discovered a disadvantage of PocketPC Phone Edition: the buttons and menus in the Contacts application are much to small to select a contact and a number while driving (unless you have very sharp eyes and tiny fingers).
That's why I wrote PhonExt.
PhonExt makes it easier to scroll through your contacts, select a phone number and make a phonecall.
PhonExt makes it possible to really use your XDA or MDA while driving.
And with PhonExt you can easily recognize who is calling, even without watching the screen!
PhonExt offers the possibility to assign a specific ring tone to a contact or even to a category of contacts!
PhoneExt works on all pocket pc's with integrated phone that have Pocket PC 2002 - Phone Edition as operating system.
You can download it from http://phonext.oabsoftware.nl.
PhonExt extends your XDA; and it's free!
Oops, almost forgot to tell that PhonExt is freeware...
Cool and tiny software
It's Great tool
i install it and it's working fine with no problems and if i'll find any bug i'll let you know.
thanks with best regards
Othman
Great little app does exactly what I want.
Hi
Very nice app, works nicely and cleanly.
However have found that (here in the UK) it dials some mobile numbers wrongly.
eg. mobile number is 0781 123456
it will dial +1 781 123456 (i.e makes a call to America!)
Clearly this needs fixing.
Hi There
same problem here not only with mobiles...it was doing the +1 thing to ALL numbers...
The authors suggested I add country code into my XDA dialing properties...
After a reboot is is not doing the +1 thing anymore but now DROPPING all leading 0's ... so 0207 gets dialled as 207 , 07973 dialled as 7973
summat is going wrong here LOLOL
same problem here not only with mobiles...it was doing the +1 thing to ALL numbers...
Click to expand...
Click to collapse
Just wondering: Have you changed your Country code from '1' to '<your country code>' ?
'Start' -> 'Settings' -> 'Connections' -> 'Connections' -> 'Dialing Locations'
After flashing qtek or the XDA-developers ROM my XDA Country code always changed to '1'.
grtz!
raymond..
yes I have, as said above , after setting the country code for mobile/home/work dialling properties , the dialler is now dropping all leading zeroes...
thnx for the reply
Doesn't customise ringtones
Hi folks,
I have the same problem- initially, phonext always dial +1 as prefix calling America as it is and then when I changed the settings of connections to country code 44, (ie not 0044), it dials correctly now. However the ringtone that I added to any categories doesn't work and even using the contact menu, adding ringtone doesn't work. Anyone has the same problem besides dialing out?
Cheers
Vic
For me it´s not working too....
First problem I have, that also the wrong numbers are dialed....
Instead of +497031.... it dials +317031....
I my contact list the number are stored in this format:
+49 (7031) .....
Another problem I have, is that i cann´t set a ring tone to a person. I´ve got this option in the contact list, but when i try it, I´ve get an error Message:
"Cannot run menu add in"
I´m using standard ROM Version 3.17.03 ENG and RAdio Version 4.21.00
Regards
Stefan
LumpiStefan: take a look at this thread, which may contain answers:
http://xda-developers.com/phpBB/viewtopic.php?t=1054
XDA developer Peter Poelman said:
LumpiStefan: take a look at this thread, which may contain answers:
http://xda-developers.com/phpBB/viewtopic.php?t=1054
Click to expand...
Click to collapse
Ok, was my mistake. Have seen this thread already, but i didn´t mentioned, that there is a new version of Phonerxt Available. Now it works fine...
Stefan
This is a very very very useful utility.
One suggestion: I have in my contacts more than a thousand numbers. I presume I'm not the only one. Although the search is fast (arrows go page up and page down), I suggest to the creator of the software to add in the upper row (instead of "Dial a contact") three buttons dividing names in alphabetical order (A-G, H-R, S-Z or whatever): this allows faster search. Thanks.
Hey all....
I recently change the language of my X01ht from Japanese to English.
Unfortunately i dont seem to be able to type Japanese anymore.
I can see it and read it, but not type it myself.
also, i seem to have problems with my Radio. after the device enters standby,
and i turn it back on, i cannot reactivate the phone. i have to soft reset before i can turn the phone on, using the comm manager.
this is not my first upgrade of a HTC phone, but certainly the most exciting
i hope someone knows what i did wrong.
Also, is it still possible to bake my own roms for the HERMES???
Sorry I can't help with the japanese input... but for the other questions:
aquasesh said:
i seem to have problems with my Radio. after the device enters standby, and i turn it back on, i cannot reactivate the phone. i have to soft reset before i can turn the phone on, using the comm manager.
Click to expand...
Click to collapse
This is very weird, which radio version are you running?
As you said you changed your phone from Japanese to English I assume you already have bootloader 1.04, then you can try to flash an extracted radio rom to see if it fixes the problems.
aquasesh said:
his is not my first upgrade of a HTC phone
[...]
Also, is it still possible to bake my own roms for the HERMES???
Click to expand...
Click to collapse
Unfortunately not yet, the hermes upgrades use NBH format instead of the NBF you have probably seen in older HTC devices.
The available shipped ROM upgrades contain all the rom parts in one single NBH file (IPL, SPL, MainSplash, SubSplash, GSM, ExtROM, and OS), this file is signed with an HTC private key, and checked against a certificate stored on the phone before it is actually flashed, so if you cook your own ROM in a NBH file you get an "invalid cert" error from the bootloader when trying to flash it.
Some of us have started researching how to hot-patch the SPL in RAM to allow flashing self-signed code, but it is still too early to have results.
aquasesh said:
Hey all....
I recently change the language of my X01ht from Japanese to English.
Unfortunately i dont seem to be able to type Japanese anymore.
I can see it and read it, but not type it myself.
Click to expand...
Click to collapse
if you are not a japanese speaker, read this. it is easier, but not typical.
http://forum.xda-developers.com/showthread.php?t=281617&page=8
if you are a japanese speaker, read this. it is a typical way to implement japanese functionality with a non-japanese wm5.0 device using atok.
http://www.yasukawa.com/blog/archives/000336.html
thanks for your replies.
Im running Radio Stack version 1.07.03.10. I just realized that i cannot send emails via my Gmail account under Flexmail2007. If i connect to a WLAN everything seems fine. But using 3G, i cannot send anything. Internet and receiving works fine though.
Also, once i use my hermes for a while (surfing internet via 3G), the back of it gets quiet warm.
I guess around 38-40 degrees celcius.
@qtotter
thanks alot, mate. That really helps.
i seem to have a few problems with this device. i didnt have a HTC for a while, mainly because i moved to Japan and my phones didnt work there.
Now i seem to be a bit behind.
aquasesh said:
Im running Radio Stack version 1.07.03.10. I just realized that i cannot send emails via my Gmail account under Flexmail2007. If i connect to a WLAN everything seems fine.
Click to expand...
Click to collapse
This is a configuration problem, check the 3G and proxy settings with your provider, this has nothing to do with the radio stack, you won't fix it by upgrading it.
aquasesh said:
I just realized that i cannot send emails via my Gmail account under Flexmail2007.
Click to expand...
Click to collapse
i can send email via gmail with pocket outlook, and so does a friend of mine... i guess it's your setting in the email client as pof says.
also, my x01ht gets warm, too, when it's connected to the internet via 3gpp.
Thanks guys...im gonna do a hard reset tomorrow and built it all up again.
right now its all kinda messy.
I have over 5000 programs and games for PPC and i wanted to see what still runs, so i have alot of dead folders and probably some unnecessary registry entries.
I also might change from Flexmail back to PO or something else.
aquasesh said:
Thanks guys...im gonna do a hard reset tomorrow and built it all up again.
right now its all kinda messy.
I have over 5000 programs and games for PPC and i wanted to see what still runs, so i have alot of dead folders and probably some unnecessary registry entries.
I also might change from Flexmail back to PO or something else.
Click to expand...
Click to collapse
over 5000 programs... if you use one program a day, it would take more than 13 years to try them all.
qtotter said:
over 5000 programs... if you use one program a day, it would take more than 13 years to try them all.
Click to expand...
Click to collapse
Thats certainly true...thats why i usually use only the ones that are interesting to me. but thats still alot...but since alot of the are a few years old now, i am reluctant to try them. i already had some problems with some software under WM5.
I installed the Japanese input...this language bar thing. But its really annoying. It opens 1 more bar every time i start a program/game.
it is also making itself very present. even if im in camera mode, when its in the
background, i can still move it. During games i have to move with the stylus, i will always pickup that little bar....very annoying...
aquasesh said:
Thats certainly true...thats why i usually use only the ones that are interesting to me. but thats still alot...but since alot of the are a few years old now, i am reluctant to try them. i already had some problems with some software under WM5.
I installed the Japanese input...this language bar thing. But its really annoying. It opens 1 more bar every time i start a program/game.
it is also making itself very present. even if im in camera mode, when its in the
background, i can still move it. During games i have to move with the stylus, i will always pickup that little bar....very annoying...
Click to expand...
Click to collapse
i am not sure what the little bar you mentioned is. i guess you tried the method for non-japanese speakers?
i have never tried any input methods other than atok 4 ppc. if you do not mind spending a couple of thousand yen for japanese input, i would recommend you buy it. but it does not officially wm5, and you need a little tweaking...
qtotter said:
i am not sure what the little bar you mentioned is. i guess you tried the method for non-japanese speakers?
i have never tried any input methods other than atok 4 ppc. if you do not mind spending a couple of thousand yen for japanese input, i would recommend you buy it. but it does not officially wm5, and you need a little tweaking...
Click to expand...
Click to collapse
I was talking about BagojsInput. it puts a language bar similar to the windows
language bar on the today screen. but its very present. i had to uninstall it, since i had problems using certain applications
aquasesh said:
I was talking about BagojsInput. it puts a language bar similar to the windows
language bar on the today screen. but its very present. i had to uninstall it, since i had problems using certain applications
Click to expand...
Click to collapse
if you have installed a japanese font and tweaked registry to read japanese, you can try ComPOBox (Otsu).
http://omaemona.sakura.ne.jp/lib/pobox/123/ComPOBoxQVGA.zip
the documents attached are all in japanese, but you might be able to find some english documents about this software on the internet.
qtotter said:
if you have installed a japanese font and tweaked registry to read japanese, you can try ComPOBox (Otsu).
http://omaemona.sakura.ne.jp/lib/pobox/123/ComPOBoxQVGA.zip
documents attached are all in japanese, but you might be able to find some english documents about this software on the internet.
Click to expand...
Click to collapse
fyi... here's the latest info on using this ComPOBox(Otsu) on x01ht. it's in japanese though...
http://allabout.co.jp/computer/pda/closeup/CU20061119A/
Thanks very much for all the info.
I also found another guide, but it seems a little bit older. but as far as i can see, it still applies. It came with all resources to follow through.
If you wanna check it out, i attached it.
aquasesh said:
Thanks very much for all the info.
I also found another guide, but it seems a little bit older. but as far as i can see, it still applies. It came with all resources to follow through.
If you wanna check it out, i attached it.
Click to expand...
Click to collapse
hope you will not try that since i don't think it will work with wm5.0...
well....i did try it... but had to hard reset after installing atok and decuma
aquasesh said:
well....i did try it... but had to hard reset after installing atok and decuma
Click to expand...
Click to collapse
i knew you would have to hard reset...
http://forum.xda-developers.com/showpost.php?p=1054547&postcount=9
people write similar questions in different threads...
http://msmvps.com/blogs/rexiology/archive/2006/06/06/99624.aspx
Helped me get rid of the bar I just need to try and get it back
klavier said:
http://msmvps.com/blogs/rexiology/archive/2006/06/06/99624.aspx
Helped me get rid of the bar I just need to try and get it back
Click to expand...
Click to collapse
there is already an answer in the link you referred to....
*****
How to avoid the unwanted appearance of the IME floater
1. Download, unzip and copy GWinter's KbdSwitch to Program Files. http://www.geocities.com/grieg_winte...are/index.html
2. Run KbdSwitch and set to Japanese IME.
3. Soft-reboot.
4. As soon the Pocket PC starts up again, the IME should be in Japanese. Sometimes, it is not and so you may need to reset KbdSwitch to Japanese IME and restart a few times.
5. Run any application that may use the Japanese IME, i.e. dictionary and wordprocessor.
6. Switch back to English IME (COMP IME).
NB: The floater should only appear only in applications that you started with Japanese IME on. Also, remember that the "X" in the upper right corner of the windows is actually a "minimize" function.
*****
if you get rid of the software totally, why don't you uninstall it???
qtotter said:
there is already an answer in the link you referred to....
*****
How to avoid the unwanted appearance of the IME floater
1. Download, unzip and copy GWinter's KbdSwitch to Program Files. http://www.geocities.com/grieg_winte...are/index.html
2. Run KbdSwitch and set to Japanese IME.
3. Soft-reboot.
4. As soon the Pocket PC starts up again, the IME should be in Japanese. Sometimes, it is not and so you may need to reset KbdSwitch to Japanese IME and restart a few times.
5. Run any application that may use the Japanese IME, i.e. dictionary and wordprocessor.
6. Switch back to English IME (COMP IME).
NB: The floater should only appear only in applications that you started with Japanese IME on. Also, remember that the "X" in the upper right corner of the windows is actually a "minimize" function.
*****
if you get rid of the software totally, why don't you uninstall it???
Click to expand...
Click to collapse
Hello,
Please, I tried this but couldn't make it work properly ... maybe I couldn't understand ... can you explain it better?
Anyway, Is there any way (even paying) to make the Japanese input work in a proper way, just like when you have the device in Japanese (always without the floating bar)??
I decided to open this new thread in order to spread this new updates amongst us. There are at least two of these roms working on our prophets.
The names:
Prophet_WM6_17944_TrueNeytral_1.6clean
KOSTER V3. Build 17944
More info here
HERE THE LINKS TO MOST OF THE ROMS
TRUENEYTRAL 1.1 http://www.savefile.com/files/586280
K0ster v2rapidshare.com/files/30153373/wm6wwerus17217v2.rarv
TRUENEYTRAL 1.2 clean http://www.savefile.com/files/689350
TRUENEYTRAL 1.3 (WIFI not working)
TRUENEYTRAL 1.4 widcomm bluetooth, camara 4... and other superb features...
TRUENEYTRAL 1.4 with MS Bluetooth Stack (instead of Widcomm) Not incl. camera 4. If you don't want russian keyboard to perform just follow DEVILDUCK's procedure here in post #180 THANKS!
SOLUTION for keyboard in latin font: ..##just for older ver. than 1.2##
Install wwe cab from post
Dialer in latin typo (see attac)
THANX 2 scooby1, trueneytral1983, nostramo, tiggerbcn and other fellas
Hello, I as you know also have the TrueNeytral and the charge of battery for usb me works perfectly and in the car also, in the PC it charge me between 210 - 280mA. The only problems are the Russian characters, for the rest it goes very thin. Greetings
Please post installation instructions/link to install info (Must downgrade? etc.)
Thanks, Eladio
To install TRUE follow normal procedure to WM6
That's:
-Downgrade to aku 2.20... If you previously had a WM6 or aku 3.3..
-Activesync 4.5
-Conect prophet via USB in normal status (not necessary to place it in -BOOTMENU)
-Execute upgrade utility (a .bat file)
-Wait no longer than 15'
-Dont touch anything, i recomend turning communications or phone off
-Anything happens in appearence but after pc message in MSDOS, hard reset -must be done.
-Now you are done.
It would be great if a russian speaker could give some info from 4pda.ru forums to change .dll in order to switch language typography in this rom.
Thx dudes
tiggerbcn said:
The only problems are the Russian characters, for the rest it goes very thin. Greetings
Click to expand...
Click to collapse
It's not a problem, it's a feature
cesardeluxe said:
-Wait no longer than 15'
Click to expand...
Click to collapse
Sure? Normally you schould wait 15-30 minutes till upgrade process is complete.
redandr said:
Sure? Normally you schould wait 15-30 minutes till upgrade process is complete.
Click to expand...
Click to collapse
This is the stimated time i have been experiencing, anyway is i wrote, and many others did... You should not unplug usb until system tells you to.
cheers
I've installed TrueNeytral a couple hours ago. Registry change of Keyboard is not working for me, but Resco Keyboard yes.
If i change registry of IR my Prophet restarts each time switch on . Original values are '15' (not '14' as you say).
Also some original ring tones (setup/personal/phone) are not recognized as valid wma files.
Eladio.Linares said:
one) are not recognized as valid wma files.
Click to expand...
Click to collapse
Check if they're called like filename .wma and remove the space.
redandr said:
Check if they're called like filename .wma and remove the space.
Click to expand...
Click to collapse
Thanks, it works.
Hi all.
I've been using TrueNeytral WM6 two days. Actually for me is the best WM6
implementation I've flased to my dear prophet. Things I've used:
-USB, Wallet and car charge, all work fine (car charger required software
reset with cable plugged to works).
-WiFi: I've wireless router to internet, with no problems starting/stopping WiFi.
Windows Live, Google Mail, everything OK. Configuration resists software
resets.
-GPRS: OK, corporate mail (Lotus Notes) working perfect.
-Bluetooth: Stereo Sony HBH DS970, handsfree Jabra bt-150, freedom bt
keyboard, parrot ck 3000, GPS Zaapa. Multiple connections (parrot & GPS)
work, tomtom returns after receiving a call (this is the first ROM to do this)
ActiveSync over BT to my desktop working also (TrueConnect over BT!)
-IR: NoviiRemote working with no tweaks. Changing registry as stated at top
of this thread for IR gets my prophet to shutoff completely when hibernate,
so i cannot use file and vcard transfers over IR, but I think this is a OBEX
problem, because IR port is working for NoviiRemote.
-I have no incompatibility at all. WisBar and SPB Backup is supposed to get
into trouble, but not for me.
-Finally, battery drain is correct. I've been monitoring two days, and
consumes 4-5% at night and 30-35% with normal use; checking once an
hour mail with GPRS and 30-40 min. call.
-Cannot map HW buttons 1 and 2.
It seems to be near RTM...
Thanks for posting this ROM, and of course to the author.
Eladio.
How did you get rid of the Russian characters?
floepie said:
How did you get rid of the Russian characters?
Click to expand...
Click to collapse
Setting Regional info (Spain) and installing Resco Keyboard... I'm not sure what you mean...
Hope this help.
Eladio
...from the 1st post here. Russian in keyboard, contacts, and dialer. So, just changing the region corrected that issue?
floepie said:
...from the 1st post here. Russian in keyboard, contacts, and dialer. So, just changing the region corrected that issue?
Click to expand...
Click to collapse
Ah!
Russian Keyb: Install Resco Keyboard and SPB Full Keyboard with dictionary completition. These are apps I use normally.
Contacts: Again Pocket Informant & Pocket Breeze, I don't use standard apps from M$. Pocket Informant traps links to std apps, so 'contacts' is hidden for me.
Dialer: I've installed cabinet from first post, but normally use voice command over bluetooth handsfree to dial.
I'm trying to isolate me from lang/reg issues. The cost is to have to install these apps...
I have come across with a post in a spanish forum where they got rid of russian characters. It has to do with a .dll. i think they succed. I will post the how to ASAP
This one also has the problem of turning itself on constantly with an Exchange account.
One more: cannot control volume of incoming call. It is set to maximum, and volume indicator seems to work but there is no real effect over volume.
Eladio.Linares said:
One more: cannot control volume of incoming call. It is set to maximum, and volume indicator seems to work but there is no real effect over volume.
Click to expand...
Click to collapse
Yeah! I've got the same problem... But this problem happened to all Crossbow ROM as i've been trying around many ROMs. Nothing can be solved... i guess.. it's bcoz incompatible sound driver...
cesardeluxe said:
I have come across with a post in a spanish forum where they got rid of russian characters. It has to do with a .dll. i think they succed. I will post the how to ASAP
Click to expand...
Click to collapse
Is there any news for the russian characters in keyboard & contacts?I'm with Prislav V3 now... Sound problems...
WLM not working (Device model name PM320)
No Windows Update
Hi,
We've been having the same problem on disabling XT9 and there were no solutions. Good thing I found this. And few people including me tried it and it really really works! so, i share this with you all.. Cheers!
Yeeeaaaahhh
It Realy Works!
I Love You For That...
Thank You So Much
Rename your thread. This could be misleading. This does NOT disable xT9. It only changes the default input method to abc (which is much better for most of us non-english users).
Rename it to something like:
Default input abc instead of xT9 cab fix
there... I changed it heheh... Thanks But I also found out that somebody knew about this earlier. Too bad I didn't read the post.
But now your thread title is more descriptive and will definitely get more hits on search query results.
guys..is it working for WM 6.1?
rexgazer said:
guys..is it working for WM 6.1?
Click to expand...
Click to collapse
Yessss, it change my life!
This is alraeady a very old update and there are very many posts about this already ;-) Just FYI.
Nice find though and I love this update.
how can you install that?
its funny, im trying to do the exact opposite...my phone just defaults to ABC but i want it to default to T9, anyone know what reg this cab file amends ?
cheers
tas
taz2007 said:
its funny, im trying to do the exact opposite...my phone just defaults to ABC but i want it to default to T9, anyone know what reg this cab file amends ?
cheers
tas
Click to expand...
Click to collapse
Same here. I want permanent xt9, not ABC.
Here's another kick for the same request. Does anybody know how to switch to xt9 permanently? I've done a lot of searching but can't seem to find a solution. Much appreciated!
Thanksssssss !
So happy found this app, simply great ! Thanks
trimakassi said:
Here's another kick for the same request. Does anybody know how to switch to xt9 permanently? I've done a lot of searching but can't seem to find a solution. Much appreciated!
Click to expand...
Click to collapse
I found out how to set xT9 as the default (over ABC):
HKLM\SOFTWARE\Tegic\eT9\IME
-> set CarrierDefaultTextMode to 1 (the .CAB in this thread sets it to 0).
Now my keypad switches to T9 automatically when it pops up!
how about forcing qwerty mode always on, instead . is it possible?
i'm trying to get a touch dual (uk t-mobile latest stock rom) to default to xt9 rather than abc.
I've tried the CarrierDefaultTextMode fix mentioned below (adding the key as a Dword as it didnt already exist) but no change, it still defaults to abc when starting a new sms message or anything.
Before recently going back to t-mobile for a repair and them flashing it with the latest rom it defaulted to xt9 and the owner wants it to behave as it did.
Anyone got any other ideas?
-FM
PS Its running wm6.1 btw.
tacia said:
Hi,
We've been having the same problem on disabling XT9 and there were no solutions. Good thing I found this. And few people including me tried it and it really really works! so, i share this with you all.. Cheers!
Click to expand...
Click to collapse
thank you so much!
How do you install it??? Please help with steps I need to take, thanks.
quew said:
I found out how to set xT9 as the default (over ABC):
HKLM\SOFTWARE\Tegic\eT9\IME
-> set CarrierDefaultTextMode to 1 (the .CAB in this thread sets it to 0).
Now my keypad switches to T9 automatically when it pops up!
Click to expand...
Click to collapse
thank you!!! worked for me
hyy man u made my day dude thankzzzz a lot it works perfectly u killed the hatred for this phone from my mind cheers
Hello,
This Fix is to hide SIM Contacts. If you have duplicated outlook/IM and SIM contacts this fix is very usefull. No more duplicated contacts
Many Fixs to hide SIM contacts didn't work for me. So i make this new one that force to hide SIM contacts.
This fix change the registry key ControlPanel\Phone\ShowSIM to 0 and after a soft reset a light executable will run but only for a few seconds.
Tested in: HTC Touch HD (backstone) with wm6.1.
Please tell me if doesn't work for you.
SeeYa,
Rilhas
Interesting program, done by yourself?
Just a registry change?
Will try.
In WM6.1, do you have problem modifiying the SIM Contacts? The "EDIT" is not highlighted, that is not usable, but Phone Contact, "EDIT" is highlight, that is can edit. Any Registry change to fix this?
ya, by myself
In my pocket pc i don't have your problem. i can modify the SIM Contacts.
I don't know any registry key for that but the solution is simple... don't use SIM Contacts because it are very limited
Duplicates the much smaller (2.5K because written in C) and same soft-reset proof functionality of the proven KaiserSimFix.
Working hard for you since the Kaiser and listed in the Advanced Config Wiki.
Strange how it doesn't work for you since it mods the same registry point.
I write this code because no other software, includes the KaiserSimFix, works in my HTC Touch HD with original ROM
rilhas said:
Please tell me if doesn't work for you.
Click to expand...
Click to collapse
I appreciate the learning experience of writing your own app, but you still failed to file a bug-report as you are asking of others.
Since the same registry point is modified, it's obtuse to conclude it to not "work" on the Touch HD especially with the lack of any other details.
Hi all
Go and take look at my reply if you still have some troubles
http://forum.xda-developers.com/showthread.php?p=3315819#post3315819
cheers
tried all the others an none would work, this seems to have done the trick !
thanks !
I can also say, tried everything else, and this is the only one that worked!
.G.
kidinspace said:
I can also say, tried everything else, and this is the only one that worked!
.G.
Click to expand...
Click to collapse
+ 1
Congratulations and thank you
thanks this work for me!
fixed
an amazing fix that I wanted! thanks!
tnx a lot ....
I tried a lot of things (always without success), finaly works for me!