I am currently using dcd 3.0.4 with radio version 3.35.04 and have not been able to access the verizon data network. When I open ie and try to browse a 'Network Log On' window appears wanting a user name, password and domain. The user name is showing as my [email protected]. I haven't been able to spend a lot time dissecting the problem, so I apologize in advance if the answer is already out there. Any info or links to helpful advice would be greatly appreciated. Thank you
u could try logging in with your online account info. that seemed to work for me. if not use that username u saw and the password vzw
hmmm...I am pretty new to this but why don't you flash the newer DCD 3.2.3 Rom and the new Radio 3.42.30 and install the verizon cabs.......I did not have these issues when I did it.
dgrooman said:
I am currently using dcd 3.0.4 with radio version 3.35.04 and have not been able to access the verizon data network. When I open ie and try to browse a 'Network Log On' window appears wanting a user name, password and domain. The user name is showing as my [email protected]. I haven't been able to spend a lot time dissecting the problem, so I apologize in advance if the answer is already out there. Any info or links to helpful advice would be greatly appreciated. Thank you
Click to expand...
Click to collapse
Did you update your Radio using the Sprint ROM? If so, did you let customizations run when you did?
Related
Gidday peoples...
I have just upgraded my Qtek1010 to 3.16 from 3.14, and now when I go to reply to a SMS message, the name and number of the contact concerned are displayed in the "To:" field like so:
To:"NAME" <NUMBER>.
When I go to send the SMS, the phone reports an error message stating that "No matching entry was found for "NAME" <NUMBER>. Would you like to continue?"
I can manually delete the name and <> and then it sends (with only the number remaining.
On version 3.14, I had used SMS Name utlity and could reply just fine... Only the number was displayed when I chose 'reply'.
Please help...
This is driving me nuts!!
Thanx
Madman
This is a known issue with that ROM. If you often use the device to send/receive SMS, may I suggest upgrading to 4.00.11 ? It is really much nicer when it comes to SMS.
Thanx for that. I might just have to do that.
Being a bit of a lay person when it comes to the ROM side of things... the latest ROM version offered by my phone supplier here in New Zealand is 3.16. If I download and install a 4.00.11 ROM and install, am I likely to have compatability problems with my GSM provider here?
I found this ROM kitchen:
http://cuba.calyx.nl/~jsummers/ROMkitchen/
Will the 4.00.11 version from there be okay do you think?
Thanx very much for your help by the way.
Sorry, one more question:
If using the above ROM kitchen, which of the following should I select at the top?
No AutoConfig data
Original O2 AutoConfig data
XDA-developers AutoConfig data
Thanx again
depends on where u at, and whether you know how to setup your phone for gprs. if you do, then go for no autoconfig, saves space.
The autoconfig settings only apply for ROMs based on 3.17.03, not for 4.x ROMs.
All downloaded and installed with no problems.
Thanx alot for all your help.
SMS problem fixed.
Hi folks,
I've really been trying to find the information I'm asking for. So please just tell me if my questions have been asked before
I'm using the unbranded Tytn with Eplus (ger). The device itself works and I wouldn't change anything about the software if it wasn't for Active Sync. I sometimes have to end it with the Task Manager and start it again before it will sync anything. He doesn't even connect to the Exchange server. Sometimes there's the message "waiting for network" (or similar, own translation). Sometimes there simply NO message at all (where he usually says "looking for changes", etc.
Finally he claims the host is unreachable - other applications (Pocket IE, e.g.) don't see a problem getting their packets out.
This is great with Push Mail. As far as I can say he gets his problems when I'm moving (driving car, even when going to the other side of a building): He changing the cell phone masts. He loses his connection and is uncapable of regaining it.
Does anyone know this problem? And if, is it fixed by any update? I'd say since it seems to be an application-only problem upgrading the windows rom should be enough, shouldn't it?
And how can I use the rom from Vodafone with my original extended rom to keep my provider settings?
First of all try the EXtROM unlocker to make sure it works on your current ROM or look for your ExtROM on the Wiki.
If you can unlock your or if your ExtROM is on the Wiki then you can just update the windows ROM. When the ROM is updated and you go through the initial setup, wait for it to say it will install some additional programs. Hit soft eset before the timer counts down to the install of the ExtROM to stop it.
Then use the ExtROM unlocker and delete all the stuff in there. Then put your ExtROM contents in there. Next, either run the ExtROM stuff manually or I usually do a hard reset and let the device do it automatically.
If that doesn't fix your connection problems I would suggest exchanging it for a new one if possible.
I also like the fact you refer to your TyTN as a 'He.'
jokinawa said:
First of all try the EXtROM unlocker to make sure it works on your current ROM or look for your ExtROM on the Wiki.
If you can unlock your or if your ExtROM is on the Wiki then you can just update the windows ROM. When the ROM is updated and you go through the initial setup, wait for it to say it will install some additional programs. Hit soft eset before the timer counts down to the install of the ExtROM to stop it.
Then use the ExtROM unlocker and delete all the stuff in there. Then put your ExtROM contents in there. Next, either run the ExtROM stuff manually or I usually do a hard reset and let the device do it automatically.
If that doesn't fix your connection problems I would suggest exchanging it for a new one if possible.
I also like the fact you refer to your TyTN as a 'He.'
Click to expand...
Click to collapse
Mine is a she...anyways though
jokinawa I thought we could have the ext rom initiate itseld unless the cabs were signed with htc's thingy? unless this has change recently. Oh how I would love to try the south africa rom with a cingular ext rom and some goodies...
slimsaturn said:
Mine is a she...anyways though
jokinawa I thought we could have the ext rom initiate itseld unless the cabs were signed with htc's thingy? unless this has change recently. Oh how I would love to try the south africa rom with a cingular ext rom and some goodies...
Click to expand...
Click to collapse
hehe
I use the Imate 1.20 ROM with the Softbank ExtROM that autoinstalled after I replaced them and did a hard reset. I also did it previously with the HTC ROMs.
then it should work fine since all those cabs came from the carrier. but i meant for say installing ms voice command
Reference:
I think since its capabilities to frustrate his owner this devices definitely have to have a soul. Or are at least living somehow.
Okay, I have to admit, "she" would be more appropriate in this case, but...
I'm still used to the update procedures from my old Qtek 9090, where the rom, radio and ext were in 3 seperate image files and where you could just delete those you didn't want to be upgraded.
I wasn't sure if I would have had all the Vodafone stuff and couldn't reverse it. But you seem quite sure that their individual stuff is in the Ext I'll have a try tonight.
My Ext can be downloaded from the site. So I can skip extracting it.
By the way: I the ftp server sometimes down? I couldn't connect yesterday from home. Now, from work, it works fine and fast.
No, didn't really work. I've got the impression that it is a little bit more reliable, but what is a push mail service that can't provide at least 99% availability? If I have to look at my phone every hour to make sure Active Sync is still doing what it is supposed to do.
I've not heard of many people experiencing this problem, but since it is only Active Sync (other programs don't have this problem) I don't see what I would get by having the phone replaced... ?
Please forgive me if I am posting this in the incorrect location, I am new to this. I have searched threads and google for an answer, I have not been able to find one.
I used the 2.40 unlocker
I flashed my xv6800 with Radio 3.35.04 and ROM 3.35.651.2
I preformed a soft reset prior to Sprint Customizations
Phone booted no problem
Dialed *228 Option 1 - Worked Phone incoming/Outgoing Works Fine
Dialed *228 Option 2 - Worked Phone Reports PRL Version 51056
Phone shows a Sprint PCS Connection, tried to delete, wont delete, don't think this is a problem
Added a Verizon Connection and chose it as default
Verizon Connection -
Modem - Cellular Line
Dial - #777
User Name - (Phone Number)@vzw3g.com
Password - vzw
Domain - Empty
Use Server Assigned IP
Use Slip - Unchecked
Use Software Compression - Checked
Use IP Header Compression - Unchecked
Use Server Assigned Addresses
Proxy - This Network Connects to the Internet
Error Report - Cannot connect for an unknown reason
Any ideas?
Thanks in advance
I'm having a similar issue but with dcd 3.2.0 and radio 3.42. I've made my own connection with the correct info and I get the same error... I'll be interested to hear any solutions/suggestions.
try ##778 then send or # depending upon the rom.
go to view , security. in there check your usernameand password. normally password is dec esn of your phone.
Did you run the Verizon Carrier cab? I bet you didn't. If not, then the phone doesn't have the encrypted handshake code or whatever it uses to access the data network. Run the Verizon carrier cab and reboot the phone and see if it works then.
Tried....
Got rid of the Sprint connection, all setting appear correct, same error though
mikenra said:
Got rid of the Sprint connection, all setting appear correct, same error though
Click to expand...
Click to collapse
even if you ran the carrier cab once, you are supposed to run it again after activation someone said if you were having data issues.
if that still doesn't help, you may need to manually add/edit your shared secret keys for the data.
Please read this thread and see if it helps:
http://forum.xda-developers.com/showthread.php?t=398016#5
Im sorry, I mean I tried it after you suggested it, after activation (*228 is activation, correct?) Im going to check out the link, thank you
to get data on verizon
I might be wrong, but instead of
Dial - #777
User Name - (Phone Number)@vzw3g.com
Password - vzw
Domain - Empty
what works for me is
username - phone#
password = vzw3g
I have a problem. When I am abroad I get error messages all the time because my phone is looking for a GPRS signal. I searched the forum and found a possible solution in the NoData application from Modaco. I installed it but only got an error message when trying to open it. Following the suggestions in some forum, I have now also installed the SDA Application Unlocker and the Modaco GPS and Hack unlocker. To no avail, it seems, for I still get the same error message when trying to open NoData.
Can someone help me?
I also have a second, unrelated, problem - it seems that the voice recorder only records onto the inbuilt memory and not onto the storage card. I find no solution for this.
do you have net framework installed? try 3.5 compact framework for mobile devices.
You can always go into connections under Settings and erase all your APNs, that way the phone has nothing to try to dial out to, and will stop giving you an error.
ashasaur said:
You can always go into connections under Settings and erase all your APNs, that way the phone has nothing to try to dial out to, and will stop giving you an error.
Click to expand...
Click to collapse
Thank you! What is an APN though?
I don't know if I have net framework installed, will try to find and install it?
Thanks!
An APN is an access point name, the number your phone dials into in order to recieve data services from your provider. And yeah, search the forums for .net 3.5 and install it.
mnemne said:
Thank you! What is an APN though?
I don't know if I have net framework installed, will try to find and install it?
Thanks!
Click to expand...
Click to collapse
If you have a stock ROM, you probably need to install .Net Framework. If you have a custom ROM, you can check with the ROM chef to see if they added it. Often, this is noted in the first few posts of the thread.
I believe the in-call recording goes to device memory on purpose. Writing to SD while in call is problematic. Copy resulting file to SD card afterwards.
I'm following the guide http://forum.xda-developers.com/showthread.php?t=1575749 for flashing the evo 3d to page plus from sprint. currently i have the phone rooted with s-off running meanrom. under the instructions it says you need to enter the MSID on the phone and if you don't have it to call your service provider. I called page plus and they say that they can't give me a MSID without the phone being activated on their service. I'm not sure what to do next. Do I give them the new ESN and have the change the service and then will they be able to give me the MSID or is there another method to do this?
Thanks for any help.
Edit: i'm currently on page plus with a old lg 9100 and the phone i'm trying to flash is a sprint phone that has never been activated.
second question: the apn backup and restore app says that APNS cannot be restored or deleted on this device because android 4.0+ does not allow 3rd party apps to write apn settings. what should I do to get this to work. i have the phone rooted with s-off currently running meanrom. should i put a different rom on there?
snow145532 said:
I'm following the guide http://forum.xda-developers.com/showthread.php?t=1575749 for flashing the evo 3d to page plus from sprint. currently i have the phone rooted with s-off running meanrom. under the instructions it says you need to enter the MSID on the phone and if you don't have it to call your service provider. I called page plus and they say that they can't give me a MSID without the phone being activated on their service. I'm not sure what to do next. Do I give them the new ESN and have the change the service and then will they be able to give me the MSID or is there another method to do this?
Thanks for any help.
Edit: i'm currently on page plus with a old lg 9100 and the phone i'm trying to flash is a sprint phone that has never been activated.
second question: the apn backup and restore app says that APNS cannot be restored or deleted on this device because android 4.0+ does not allow 3rd party apps to write apn settings. what should I do to get this to work. i have the phone rooted with s-off currently running meanrom. should i put a different rom on there?
Have you flashed the page plus prl yet? If so you need to call them and give them your esn number. I believe the msid is for if you want to port your number over first before you call page plus. If you followed the guide to a T up until the apn part. Even though apps won't allow you to write to the apn, its ok because all your gonna do is delete and restore. Put your phone in airplane plane mode. Delete your current apn, click restore apn chose the page plus one. Disable airplane mode and reboot. I hope this helps you.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Jsparta26 said:
Have you flashed the page plus prl yet? If so you need to call them and give them your esn number. I believe the msid is for if you want to port your number over first before you call page plus. If you followed the guide to a T up until the apn part. Even though apps won't allow you to write to the apn, its ok because all your gonna do is delete and restore. Put your phone in airplane plane mode. Delete your current apn, click restore apn chose the page plus one. Disable airplane mode and reboot. I hope this helps you.
Click to expand...
Click to collapse
thanks, for the input. i'm going to try this a little later today.
so just an update for anyone who might stumble onto this thread. I figured out the steps: (Thanks Jsparta26)
After I flashed the prl, I called page plus and they activated the ESN. The MSID was the same as my phone number. Phone still didn't work, so i reflashed the PRL and then the phone was working. I didn't need to delete the APN, it was just working after. Now phone works for calls and 1x data. no MMS yet, got to figure that one out.
thanks for the help.
Your mms is also included in the apn file. Try the delete and restore method to see if works for you
Jsparta26 said:
Your mms is also included in the apn file. Try the delete and restore method to see if works for you
Click to expand...
Click to collapse
I'm getting the message: Unfortunately APSs cannot be restored or deleted on this device because Android 4.0+ does not allow 3rd party apps to Write APN settings.
The Options in the Program are: Backup APNs, Restore APNs, Delete Backup Files, Delete APNs, and Donate.
Not sure what to do from here.
Ignore the part of backup, delete and restore. I was able to do this with an aosp rom and should work with a sense rom. You just cannot write to the apn file. Make a backup of your original apn, delete the current one, then restore using the page plus apn file and reboot. It should work. If not then manually copy it the apn file with a file explorer into your sdcard and take the page plus file and paste in the original location of the file and reboot. Let me know if that works.COLOR="Silver"]
---------- Post added at 09:39 AM ---------- Previous post was at 09:33 AM ----------
[/COLOR]Which app are you using? Well if it don't work then I have another solution. Do you happen to know the settings of page plus's apn settings? Also do you know your msl code? If so, then open up your dialer and type ##3282# and punch in your msl code under edit. Once your through click on advanced and scroll down to the bottom of the screen and click on mmsc settings. If you know the settings you can manually input the settings in their correct spots. Once you do that hit commint changes or modifications at the top of the screen and hit reboot
Jsparta26 said:
Ignore the part of backup, delete and restore. I was able to do this with an aosp rom and should work with a sense rom. You just cannot write to the apn file. Make a backup of your original apn, delete the current one, then restore using the page plus apn file and reboot. It should work. Let me know if that works for you.
Click to expand...
Click to collapse
I think I figured it out. In the settings for the program there is an option for "ignore ICS". i selected that and was able to delete and restore. looks like mms is now working, but it still shows 1x data.
snow145532 said:
I think I figured it out. In the settings for the program there is an option for "ignore ICS". i selected that and was able to delete and restore. looks like mms is now working, but it still shows 1x data.
Click to expand...
Click to collapse
Speedtest.net
DL: 118kbps, UL: 26kbps, Ping: 810ms
yeah, 1x not so good.
Well I am glad that you got mms working. Not sure about the 1x signal, it could be a cell tower issue, not enough cell towers or that page plus's network is low priority. Have you flashed the latest page plus prl?
Jsparta26 said:
Well I am glad that you got mms working. Not sure about the 1x signal, it could be a cell tower issue, not enough cell towers or that page plus's network is low priority. Have you flashed the latest page plus prl?
Click to expand...
Click to collapse
plenty of cell towers here, so that shouldn't be a problem. i'll try and flash the other prls and see what i get (right now i'm running the one from the main thread included in the rar). in the main thread i think there were problems with people not getting 3g. if i can't solve it with the prls, i'll have to comb through that thread for a solution.
Thanks for your help.
Jordan
No problem. Just keep this in mind. Check to see if your radios are up to date on page plus's firmware. People used to have that problem when they went flash happy with the vm ruu ics leak back in may and messed up their phones with the dreaded 1x signal. Just something to think about. Good luck.