Please forgive me if I am posting this in the incorrect location, I am new to this. I have searched threads and google for an answer, I have not been able to find one.
I used the 2.40 unlocker
I flashed my xv6800 with Radio 3.35.04 and ROM 3.35.651.2
I preformed a soft reset prior to Sprint Customizations
Phone booted no problem
Dialed *228 Option 1 - Worked Phone incoming/Outgoing Works Fine
Dialed *228 Option 2 - Worked Phone Reports PRL Version 51056
Phone shows a Sprint PCS Connection, tried to delete, wont delete, don't think this is a problem
Added a Verizon Connection and chose it as default
Verizon Connection -
Modem - Cellular Line
Dial - #777
User Name - (Phone Number)@vzw3g.com
Password - vzw
Domain - Empty
Use Server Assigned IP
Use Slip - Unchecked
Use Software Compression - Checked
Use IP Header Compression - Unchecked
Use Server Assigned Addresses
Proxy - This Network Connects to the Internet
Error Report - Cannot connect for an unknown reason
Any ideas?
Thanks in advance
I'm having a similar issue but with dcd 3.2.0 and radio 3.42. I've made my own connection with the correct info and I get the same error... I'll be interested to hear any solutions/suggestions.
try ##778 then send or # depending upon the rom.
go to view , security. in there check your usernameand password. normally password is dec esn of your phone.
Did you run the Verizon Carrier cab? I bet you didn't. If not, then the phone doesn't have the encrypted handshake code or whatever it uses to access the data network. Run the Verizon carrier cab and reboot the phone and see if it works then.
Tried....
Got rid of the Sprint connection, all setting appear correct, same error though
mikenra said:
Got rid of the Sprint connection, all setting appear correct, same error though
Click to expand...
Click to collapse
even if you ran the carrier cab once, you are supposed to run it again after activation someone said if you were having data issues.
if that still doesn't help, you may need to manually add/edit your shared secret keys for the data.
Please read this thread and see if it helps:
http://forum.xda-developers.com/showthread.php?t=398016#5
Im sorry, I mean I tried it after you suggested it, after activation (*228 is activation, correct?) Im going to check out the link, thank you
to get data on verizon
I might be wrong, but instead of
Dial - #777
User Name - (Phone Number)@vzw3g.com
Password - vzw
Domain - Empty
what works for me is
username - phone#
password = vzw3g
Related
I am currently using dcd 3.0.4 with radio version 3.35.04 and have not been able to access the verizon data network. When I open ie and try to browse a 'Network Log On' window appears wanting a user name, password and domain. The user name is showing as my [email protected]. I haven't been able to spend a lot time dissecting the problem, so I apologize in advance if the answer is already out there. Any info or links to helpful advice would be greatly appreciated. Thank you
u could try logging in with your online account info. that seemed to work for me. if not use that username u saw and the password vzw
hmmm...I am pretty new to this but why don't you flash the newer DCD 3.2.3 Rom and the new Radio 3.42.30 and install the verizon cabs.......I did not have these issues when I did it.
dgrooman said:
I am currently using dcd 3.0.4 with radio version 3.35.04 and have not been able to access the verizon data network. When I open ie and try to browse a 'Network Log On' window appears wanting a user name, password and domain. The user name is showing as my [email protected]. I haven't been able to spend a lot time dissecting the problem, so I apologize in advance if the answer is already out there. Any info or links to helpful advice would be greatly appreciated. Thank you
Click to expand...
Click to collapse
Did you update your Radio using the Sprint ROM? If so, did you let customizations run when you did?
I just updated my android to Android 2.1 -update 1.
I tried to sign in to my google account, but then this error message appears:
"Can not establish a reliable data connection to the server.
This could be a temporary problem or your sim card may not be provisioned
for data services. If it continues call customer care."
I tried few times already but the result is just the same. Is this a bug or what?
Can somebody please tell me how to handle this?Please..I cannot access android market.
my phone info:
HTC Hero G2 Touch
Firmware version 2.1 update 1
Thanks
this is development! not Questions & Answers...
Try using WiFi, or turn 3g on in case you haven't..
methyppo_20 said:
I just updated my android to Android 2.1 -update 1.
I tried to sign in to my google account, but then this error message appears:
"Can not establish a reliable data connection to the server.
This could be a temporary problem or your sim card may not be provisioned
for data services. If it continues call customer care."
I tried few times already but the result is just the same. Is this a bug or what?
Can somebody please tell me how to handle this?Please..I cannot access android market.
my phone info:
HTC Hero G2 Touch
Firmware version 2.1 update 1
Thanks
Click to expand...
Click to collapse
are you in China? if so, you have to make some hard coding for ip direction in hosts.
127.0.0.1 localhost
72.14.254.100 clients2.google.com
72.14.254.100 android.l.google.com
72.14.254.100 android.clients.google.com
because when last time Google left China, they(or the Chinese Government) modified the DNS.
I had this same problem. It related to the hosts file as stated above. See this link for the fix...you will find more details on how to fix it
http://www.google.as/support/forum/p/android/thread?tid=07b80db205a8fa45&hl=en
Hi guys,
few days ago I've decided to move forward with Fusion Update 7 ROM to Fusion Update 8. Procedure was about normal beside the fact I had also purged SD card. Upgrade went well, but:
I cannot get mobile connection
No SMS can be sent
No matter which ROM/RADIO I had flashed after my previous move everything beside those two is working. So I can get WIFI connection or receive SMS, I can also call and receive calls.
My configuration:
- Hardware: HTC HERO GSM (white)
- Recovery: AmonRa 1.7
- ROM: FROYO_2.2_elelinux_v2.2 (at the moment)
- RADIO: 63.18.55.06OU_6.35.15.01 (at the moment)
Additional info:
- SMSC is set correctly (checked using *#*#4636#*#*)
- APN list is correct
- rollback to vanilla 1.5 ROM from RUU not helped
- other SIM cards from other carriers work the same way
I trying to get some debug information using adb, but only thing I can find is that ppp connection is missing in netcfg.
Do anyone know how to initiate Mobile Connection through adb shell ? or anyone get similar problem before?
Thank in advance,
Problem solved. During messing with ROMS my SIM card must been somehow damaged.
After more tries with other SIM cards my phone started to work finally.
You are missing the correct apn settings for your mobile data and also missing or have the wrong SMS service number, have a search on the forums here, or Google and you should find them. Always worth backing these up or writing them down, as not all rom's have necessarily got all providers son's included.
Sent from my HTC Hero using XDA App
Thank you for fast reply.
I checked those before:
SMSC:
- refreshed with *#*#4636#*#* and those looks correctly for my carrier
APNs:
- there where missing fields in APN config which I've updated according to carrier configuration
Still nothing had changed.
I assume that it must be some kind of config that do not change between ROMS.
(I will update first message with those info.)
Did you checked with an other SIM/carrier?
Yes I did.
Effects where the same.
I've also rolled back to vanilla 1.5 ROM from RUU. Nothing changed.
It must be some kind of external configuration that is not changed via ROM replacement. Can this be true?
Thread moved to Q&A.
I'm following the guide http://forum.xda-developers.com/showthread.php?t=1575749 for flashing the evo 3d to page plus from sprint. currently i have the phone rooted with s-off running meanrom. under the instructions it says you need to enter the MSID on the phone and if you don't have it to call your service provider. I called page plus and they say that they can't give me a MSID without the phone being activated on their service. I'm not sure what to do next. Do I give them the new ESN and have the change the service and then will they be able to give me the MSID or is there another method to do this?
Thanks for any help.
Edit: i'm currently on page plus with a old lg 9100 and the phone i'm trying to flash is a sprint phone that has never been activated.
second question: the apn backup and restore app says that APNS cannot be restored or deleted on this device because android 4.0+ does not allow 3rd party apps to write apn settings. what should I do to get this to work. i have the phone rooted with s-off currently running meanrom. should i put a different rom on there?
snow145532 said:
I'm following the guide http://forum.xda-developers.com/showthread.php?t=1575749 for flashing the evo 3d to page plus from sprint. currently i have the phone rooted with s-off running meanrom. under the instructions it says you need to enter the MSID on the phone and if you don't have it to call your service provider. I called page plus and they say that they can't give me a MSID without the phone being activated on their service. I'm not sure what to do next. Do I give them the new ESN and have the change the service and then will they be able to give me the MSID or is there another method to do this?
Thanks for any help.
Edit: i'm currently on page plus with a old lg 9100 and the phone i'm trying to flash is a sprint phone that has never been activated.
second question: the apn backup and restore app says that APNS cannot be restored or deleted on this device because android 4.0+ does not allow 3rd party apps to write apn settings. what should I do to get this to work. i have the phone rooted with s-off currently running meanrom. should i put a different rom on there?
Have you flashed the page plus prl yet? If so you need to call them and give them your esn number. I believe the msid is for if you want to port your number over first before you call page plus. If you followed the guide to a T up until the apn part. Even though apps won't allow you to write to the apn, its ok because all your gonna do is delete and restore. Put your phone in airplane plane mode. Delete your current apn, click restore apn chose the page plus one. Disable airplane mode and reboot. I hope this helps you.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Jsparta26 said:
Have you flashed the page plus prl yet? If so you need to call them and give them your esn number. I believe the msid is for if you want to port your number over first before you call page plus. If you followed the guide to a T up until the apn part. Even though apps won't allow you to write to the apn, its ok because all your gonna do is delete and restore. Put your phone in airplane plane mode. Delete your current apn, click restore apn chose the page plus one. Disable airplane mode and reboot. I hope this helps you.
Click to expand...
Click to collapse
thanks, for the input. i'm going to try this a little later today.
so just an update for anyone who might stumble onto this thread. I figured out the steps: (Thanks Jsparta26)
After I flashed the prl, I called page plus and they activated the ESN. The MSID was the same as my phone number. Phone still didn't work, so i reflashed the PRL and then the phone was working. I didn't need to delete the APN, it was just working after. Now phone works for calls and 1x data. no MMS yet, got to figure that one out.
thanks for the help.
Your mms is also included in the apn file. Try the delete and restore method to see if works for you
Jsparta26 said:
Your mms is also included in the apn file. Try the delete and restore method to see if works for you
Click to expand...
Click to collapse
I'm getting the message: Unfortunately APSs cannot be restored or deleted on this device because Android 4.0+ does not allow 3rd party apps to Write APN settings.
The Options in the Program are: Backup APNs, Restore APNs, Delete Backup Files, Delete APNs, and Donate.
Not sure what to do from here.
Ignore the part of backup, delete and restore. I was able to do this with an aosp rom and should work with a sense rom. You just cannot write to the apn file. Make a backup of your original apn, delete the current one, then restore using the page plus apn file and reboot. It should work. If not then manually copy it the apn file with a file explorer into your sdcard and take the page plus file and paste in the original location of the file and reboot. Let me know if that works.COLOR="Silver"]
---------- Post added at 09:39 AM ---------- Previous post was at 09:33 AM ----------
[/COLOR]Which app are you using? Well if it don't work then I have another solution. Do you happen to know the settings of page plus's apn settings? Also do you know your msl code? If so, then open up your dialer and type ##3282# and punch in your msl code under edit. Once your through click on advanced and scroll down to the bottom of the screen and click on mmsc settings. If you know the settings you can manually input the settings in their correct spots. Once you do that hit commint changes or modifications at the top of the screen and hit reboot
Jsparta26 said:
Ignore the part of backup, delete and restore. I was able to do this with an aosp rom and should work with a sense rom. You just cannot write to the apn file. Make a backup of your original apn, delete the current one, then restore using the page plus apn file and reboot. It should work. Let me know if that works for you.
Click to expand...
Click to collapse
I think I figured it out. In the settings for the program there is an option for "ignore ICS". i selected that and was able to delete and restore. looks like mms is now working, but it still shows 1x data.
snow145532 said:
I think I figured it out. In the settings for the program there is an option for "ignore ICS". i selected that and was able to delete and restore. looks like mms is now working, but it still shows 1x data.
Click to expand...
Click to collapse
Speedtest.net
DL: 118kbps, UL: 26kbps, Ping: 810ms
yeah, 1x not so good.
Well I am glad that you got mms working. Not sure about the 1x signal, it could be a cell tower issue, not enough cell towers or that page plus's network is low priority. Have you flashed the latest page plus prl?
Jsparta26 said:
Well I am glad that you got mms working. Not sure about the 1x signal, it could be a cell tower issue, not enough cell towers or that page plus's network is low priority. Have you flashed the latest page plus prl?
Click to expand...
Click to collapse
plenty of cell towers here, so that shouldn't be a problem. i'll try and flash the other prls and see what i get (right now i'm running the one from the main thread included in the rar). in the main thread i think there were problems with people not getting 3g. if i can't solve it with the prls, i'll have to comb through that thread for a solution.
Thanks for your help.
Jordan
No problem. Just keep this in mind. Check to see if your radios are up to date on page plus's firmware. People used to have that problem when they went flash happy with the vm ruu ics leak back in may and messed up their phones with the dreaded 1x signal. Just something to think about. Good luck.
For some reason I was unable to find this anywhere on the internet but managed to fix it myself, so I'm writing here to document it.
I have a T-Mobile LG G3 (model LG-D851) and after rooting, something happened that made me no longer able to add APNs. On top of that, there were no APNs registered on the phone, so I was unable to access any form of mobile data, although telephone worked. T-Mobile's technical support wasn't able to find the solution either. (In retrospect, using Titanium Backup to restore telephony data (messages etc.) likely corrupted my APN database).
Basically what was happening was in Settings -> Networks -> Tethering & Networks -> Mobile Networks -> Access Point Names, it said "No APNs", and selecting menu -> New APN did nothing; no menu appeared or anything. Basically I didn't have T-Mobile's LTE APN registered and I couldn't re-add it.
I tried a lot of things to fix it, but the solution was actually very easy (requires root): in the root directory, go to /data/data/com.android.providers.telephony/databases/ and notice the "telephony.db" file. This is an SQLite database that has the APN data in it, but in my case it was corrupted. I simply renamed the file, then rebooted my phone (actually, the phone crashed ) and voila! LTE was working good as new on restart. The system detected the file was missing and created a new one with default settings; that is, with T-Mobile's APN already inside. "Add APN" also works now.
Maybe someday this will help someone else in my situation. Basically, be careful with Titanium Backup, haha.