Hi!
Ever since I installed AP4 i have been experiencing severe sound skipping when I speak. Sound FROM the phone is perfect but the person that I talk to can hardly hear what I'm saying because of skipping. This applies when using the internal mic as well as BT headset (A2DP and non-A2DP) but when i use the standard wired headset everything works ok. Tried using the A2DP fixes but no change. Any ideas?
Related
Hi!
Yesterday I went through the upgrade of the official Dutch HTC Europe WM6 release. No problems there and WM6 works a charm.
The problem came to the light when I paired my Motorola HT820 A2DP headset. The music in the Windows Media Player plays well through A2DP, but only for a few seconds. After that it starts pausing every second. The same goes for all types of audio I play (video, TCPMP, etc).
Who can help? There was no problem using WM5 and a previous WM6 ROM (unofficial and WWE).
Thanks!!
Sounds like your sampling rates are off. Check this thread for info:
http://forum.xda-developers.com/showthread.php?t=308752
Search on Priority256_fix. That seems to be the final piece of the puzzle to fix the blue tooth problem.
nrm said:
Search on Priority256_fix. That seems to be the final piece of the puzzle to fix the blue tooth problem.
Click to expand...
Click to collapse
Or search on Bluetooth Priority Fix.
Thanks for the tips.
Ofcourse there will be always another problem: my Motorola A2DP headset now fails to autoconnect (after being paired) to the X7500. Normally when I turn on the headset you will see a headphone/musictone icon in the top bar and hear the "connect sound" through the headset. This doesn't happen now. I need to soft reset first, and after that it will work again, for a few times.
Deleting the headset and pairing again works, but the autoconnecting stops working when I try again later.
Damn, what is it with the official WM6 and A2DP?
apd said:
Or search on Bluetooth Priority Fix.
Click to expand...
Click to collapse
Hi, I still experience lags and pauses while using A2DP. With the registry tweak Priority256 it even gets a lot worse!!
Any more suggestions? I tried several headsets and even the Parrot Sound speaker set, but all of them are the same. So it's not the headset.
EDIT: I figured that it has something to do with the normal Bluetooth headset I use. I want to use the A2DP stereo headset simultaneously with the normal headset for phone calls. The A2DP headset only uses "Stereo audio" when connected, while the normal headset uses "Headset". This was no problem at all with all other devices I had and no problem as well on the X7500 running WM5. With WM6 things are different I guess.
A2DP WITHOUT the normal headset connected is no problem, like it should work. WITH the voice headset connected simultaneously, the lags come up, the prioriry fix makes no difference in this matter. And I'm stubborn, I want to have the voice headset to be connected at all times, the A2DP headset when I want to listen to music.
Any thoughts?
I just experienced a bug. I got in mij car, enabled bluetooth and stared the enging. I could hear the touch cruise connect to the parrot bluetooth carkit (usually it beeps twice, now it beeped 4-5 times).
I fired up my TomTom, instructions were given over the speakers of my car stereo (via carkit)!! I did some testing with other audio files, all worked over speakers.
Quality wasn''t sufficient for audio, but e-books and podcasts sounded good enough.
After a few minutes of playing arround I received a call, after hanging up the call the usual way on the carkit shut down the possibility to hear audio over the car speakers.
Anybody know a way to force audio over the car speakers through the handsfree??
Try this tool:
it sends all the audio signals to the headset (or BT Carkit)
Would it be possible to switch bluetooth audio on just when there is a sound to play, cause it seems a little bit useless to hear nothing when my navigation has nothing to say..
My Motorola H17 pairs and connects to my TP but there's no sound when playing music or audio. It works fine with my Optimus V phone using the BT-Mono app to redirect the sound out to the headset. I've tried BT-Mono which appears to function correctly (no errors etc), but when I switch it over no audio through the H17 although the tablet speaker is muted as it should be.
Is there something else I need to do on the Prime to switch the sound over, is it an incompatibility issue with this headset, or is there another app that would work? I've searched a bit and apparently others with BT headsets get them working with TP, but also found very little on the subject. Perhaps it's the lack of phone functionality with some headsets? I'd try another brand/model if I was sure it would work.
Thanks for any help.
Get audio manager from the market, there is both pay and free, pay attention to incall volume. It worked for me, seems incall volume is defaulted to zero at least in my case.
Dahenjo said:
My Motorola H17 pairs and connects to my TP but there's no sound when playing music or audio. It works fine with my Optimus V phone using the BT-Mono app to redirect the sound out to the headset. I've tried BT-Mono which appears to function correctly (no errors etc), but when I switch it over no audio through the H17 although the tablet speaker is muted as it should be.
Is there something else I need to do on the Prime to switch the sound over, is it an incompatibility issue with this headset, or is there another app that would work? I've searched a bit and apparently others with BT headsets get them working with TP, but also found very little on the subject. Perhaps it's the lack of phone functionality with some headsets? I'd try another brand/model if I was sure it would work.
Thanks for any help.
Click to expand...
Click to collapse
i found a bug in .73;
sometimes if i listen to music with standard no mic stereo headphones (Sennheiser MX160), once i disconnect headphones and try to make a call the audio signal is not switched to the phone's speaker. so the call is mute, the other end can hear me but i can't hear the other end, if i connect the headphones and disconnect again the audio signal get routed correctly.
this doesn't happen if i connect, instead of Sehheiser headphones, the standard sony headphones or my "DIY" car stereo adapter...
I think it's an hardware bug, something looking for the impedence connected
I did notice an issue that's only occurred once, where audio wouldn't swap between headphones and speaker. I was watching a movie trailer at home on the loud speaker, then put my headset (aJays One+ with mic) in to listen to some music whilst on the move and it just didn't acknowledge the headphones. It took several restarts before the phone would correctly detect the headset and switch between the two. This was also on the .73 firmware.
When connected to a bluetooth headset, no matter "what" ROM i'm using, it seems to not ring to the phone. I've used all the apps that are supposed to redirect sound and they don't work well at all.
Thoughts?
Same issue here.